ASBESTOS CHEMICAL GAINING SHEET (TO BE USED WITH OSH 24 VIDEOTAPE) IHEM ICAL NAME: ASBESTOS There art several types of asbestos, but the most used type is cnrysotilei Other varieties are crocidolite, amosite, anthrophyll ite, and tremoiite.

I r I !

SEPTEMBER 4, 1911 ASBESTOS WIRES - ULUS 17 11.5 The impregnating compound shall rrlum its iniiial qualities during the Ufc of the wire and shall not develop any damaging chemical action within itself or with any other component of the finished wire. 11.6 Thef insulation on a specimen of finished conductor ft to be inspected visually to determine whether or not it complies with the requirements in paragraphs 11.1--11.5 with respect to general construction.

Air Conditioning Kelvinator Corporation -i* MANUFACTURERS OF ELECTRIC REFRIGERATION SINCE 1914 ' Detroit, Mich.

Air Conditioning Unit Heaters and Coolers F.

Coal-Heat Published at 20 W.

Recommended Procedure For Determination of Recovery Coefficients for 3M Organic Vapor Monitor #3500/3520 3M publishes the Recovery Coefficient for many of the organic vapors in the 3500 Compound Guide.

'Tt MATERIAL SAFETY DATA SHEET (in compliance with 29 CFR 1910.1200 and WHM1S) IDENTITY: Polycizer* ESO ^ ,/ -, u &r~>f 'tSrfaiCivy.

SUBPART Z--OCCUPATIONAL HEALTH AND ENVIRONMENTAL CONTROL 383 (j) IMMw, Each employ** anxmked v (D> minim iTnTsmln rrnrrlr Irirtr-- be legffdg Isbeiod sWher: In vinyl chlstM* or polyvinyl tMorlrte oponttoo* ehall be prorMod tnlntnc In n pnoan rdaUnc to tlie hutrAe of vinyl *--to. end pneautleaa tor tte Mtfe w. (1) Til* preerwn ilmll tndinto: (1) Tim nstur* of the beolth UMUd tan dirato aepotura to vinyl chloride InohoHoo ^orU'rOllv tlto CHIlHlgQlB tnaae (SOPT); and <E) Oammaglutamyl transpeptldsse. (3) Examinations provided In accord ance with thla paragraph shall be performed at least: <1> Every 8 months for each employee who has been employed In vinyl chlo ride er polyvinyl chloride manufacturing for 10 yean or looter; and Tain Cm nSIS* KlIUtinT rUBHAMM OiA^OllM V*m*o** or <tt> In MUdubwt with 4f CPVt Parts 170-lSf with u* additional legend Ctscsi-SvwtcT A*t applied near the label or placard.

SUMMARY OF MEDICAL SURVEILLANCE REQUIREMENTS FOR VINYL CHLORIDE OSHA REGULATION 29 CFR 1910.1017 Exposure Levels Surveillance Action Level PEL STEL TLV 0.5 ppm (8 hour) 1 ppm (OSHA 8 hour) 5 ppm (OSHA 15 min.) 5 ppm (ACGIH 8 hour) Required if exposure exceeds action level, or if a worker is exposed to a single large release in an emergency situation.

ABD00027598 CONDEA Vista Company - Aberdeen Plant Process Safety Manual Document Management Page 1 of 3 Revision 1 PSM -020 Approved bv Management Systems Coordinator Date 1 0 SCOPE This procedure applies to Condea Vista Company , Aberdeen, MS covered by the OSHA Process Safety Management regulation for highly hazardous chemicals (PSM) Reference 29 CFR 1910 119 2 0 PURPOSE This procedure describes how documents and data which relate to the Aberdeen Plant process safety management system are controlled This procedure also identifies who is responsible for document control 3 0 RESPONSIBILITY Management Systems Coordinator The management systems coordinator is responsible for the process safety management manual Document Control Coordinator The document control coordinator is responsible for revising documents, distributing documents, and removing obsolete documents from the point of issue and locations of use 4 0 DEFINITIONS 4 1 Document - refers to any written procedure, data, drawing/plot, record etc whether in electronic or paper format 4 2 Owner - the person who is ultimately responsible for ensuring that the document is valid (up to date, certified, most recent issue, etc ) and maintained as required by the PSM regulation or by corporate standards In addition, the *4o5wner" is the person responsible for making sure that files are reviewed and purged prior to loading into the electronic Document Management System 5 0 PROCEDURE 5 I General FORMAT REQUIREMENT FOR CONTROLLED DOCUMENTS Documents controlled by this procedure (controlled documents) are maintained in one of the following forms Documents with an original approval signature which are maintained by the document control coordinator (l e the master copy) Documents maintained in the Document Management System or as identified in the DMS ABD00027599 CONDEA Vista Company - Aberdeen Plant Process Safety Manual Document Management Page 2 of 3 Revision 1 PSM -020 5 0 PROCEDURE -CONT 5 1 General - cont FORMAT REQUIREMENTS FOR CONTROLLED DOCUMENTS - cont Controlled document are required to have the following information On Each Page Manual Title (if the documents are maintained in a manual) Document Title Document Number Revision Page Number of Total Pages (Page___ of___ ) On the First Page Approval Signature and date (printed documents only) Note Approval for electronic documents is as follows (1) indicated by an approval name and date on the electronic copy of the document which matches the printed copy or (2) restricted access such that only those who have approval authority DOCUMENT NUMBER Process Safety Management documents are identified by department and element (ex MaintMI-307 identifies A Mechanical Integrity Procedure in the Maintenance Department REVISION 6 0 DOCUMENT MANAGEMENT PROGRAM ELEMENTS 6 1 The Management Systems Coordinator has overall responsibility for coordinating the document management process 6 2 The persons listed below are responsible for each document or group/type of documents required to be maintained under PSM ELEMENT Applicability Determination Employee Participation Process Safety Information Hazardous Chemicals Equipment Technology NUMBER PSM-001 PSM-002 PSM-003 OWNER Technology Manager All Managers Capex Manager Safety & Health Mgr Maintenance Manager Technology Manager ELEMENT Operating Procedures NUMBER PSM-005 OWNER Vinyl Unit Manager Maintenance Manager ABD00027600 CONDEA Vista Company - Aberdeen Plant Process Safety Manual Document Management Training Contractors PSM-006 PSM-007 Pre-Startup Safety Reviews Mechanical Integrity Hot Work Permit Management of Change Incident Investigation Emergency Response Compliance Audits PSM-008 PSM-009 PSM-010 PSM-011 PSM-012 PSM-013 PSM-014 1 rade Secrets PSM-015 5 0 REVISION HISTORY Description of the Change Written to Match Corporate Standard Owner Changes Page 3 of 3 Revision 1 PSM -020 Training Manager Capex Manager Maintenance Manager Capex Manager Maintenance Manager Safety & Health Mgr Capex Manager Safety & Health Mgr Safety & Health Mgr Corporate Safety & Health Mgr Plant Manager Revision 0 1

February 21, 1919 CONTRACT CLEANIMO OF C-54 On January 29th, tha block eontractora performed routina cleaning maintenance on tha c-54 column.

ABD00087636 HAZARD COMMUNICATION, CFR 1910.1200 TRAINING OUTLINE * I.

ABDOO102630 GUIDANCE FOR IMPLEMENTING PROGRAMS FOR OSHA 29 CFR 1910.119 PROCESS SAFETY MANAGEMENT OF HIGHLY HAZARDOUS CHEMICALS PART ONE PROCESS SAFETY INFORMATION by PrimaTech June 10. 1994 Primatech Inc. 445 Hutchinson Avenue, Suite 200 Columbus, Ohio 43235 (614) 841-9800 ABDOO102631 GUIDANCE FOR IMPLEMENTING PROGRAMS FOR OSHA PSM PROCESS SAFETY INFORMATION This document contains information that may assist a company in establishing, or reviewing and updating, the process safety information (PSI) element of their process safety management (PSM) program.

extremely unfavorable atmoipheHo condllioiu AUlfrQulncn BIf| Co, Milwau kee, WU. ( M42 DISTRIBUTION CAPACITOR -- New design permit* the 25-kvai capaeltat* to Increate tbelr dkpsdly 66 2/3% ever preaeot l$*kvr unit, with an Increase in weight itid volume of only 50%.