American Society of Heating and Ventilating Engineers Guide, 1937 GROSSMANN, Harry A.

American Society of Heating and Ventilating Engineers Guide, 1937 MORTON, Charles H.

Heating Ventilating Air Conditioning Guide 1938 and pi, pi, pi, etc. = the pressure of the gases or vapors corresponding to the observed temperature, then p = pi + pi + Pi, etc

Heating Ventilating Air Conditioning Guide 1938 Cannon showed that excessive loss of heat is associated with increased activity of the adrenal medulla1*.

Heating Ventilating Air Conditioning Guide 1938 Table 2.

Heating Ventilating Air Conditioning Guide 1938 8 Why should all boiler steam supply tappings be used full size?

(T a b le 9.

Heating Ventilating Air Conditioning Guide 1939 Fig. 3.

Heating Ventilating Air Conditioning Guide 1939 Additional secondary air is introduced around the flame by draft inspi ration.

Heating Ventilating Air Conditioning Guide 1939 Overfeed Inclined Grate Stokers In general the combustion principle is similar to the flat grate stoker but this stoker (Fig. 3) is provided with rocking grates set on an incline to advance the fuel during combustion.

Heating Ventilating Air Conditioning Guide 1939 PIPE SIZES The determination of pipe sizes for a given load in steam heating depends on the following principal factors: 8 1.

Heating Ventilating Air Conditioning Guide 1939 times, also, brine from an industrial system already installed, is the only convenient source of refrigeration.

Heating Ventilating .Air Conditioning Guide 1939 Effect of Humidity upon the Absorption of Sound in a Room, by V.

Heating Ventilating Air Conditioning Guide 1939 breathing zones.

Heating Ventilating Air Conditioning Guide 1939 Temperature GENERAL RULES FOR DRYING The highest temperature possible should' be used because of faster drying and smaller requirements for ventilation.