S' American Society of Heating and Ventilating Engineers Guide, 1934 Chapter 26--Chimneys draft is employed as an auxiliary to overcome the increased resistances or draft losses.

.

American Society of Heating and Ventilating Engineers Guide, 1934 s A chimney for a gas-fired boiler or furnace should be constructed in accordance with the principles applicable to other boilers.

American Society of Heating and Ventilating Engineers Guide, 1934 a 2-in. pipe for Section KA.

American Society of Heating and Ventilating Engineers Guide, 1934 To secure a correct distribution of hot water among the several risers it is necessary, as previously stated, to introduce special resistances to balance the several risers, as follows: The first riser is 80 ft hearer the boiler than the fifth riser.

INDEX TO ADVERTISERS American Society of Heating and Ventilating Engineers Guide, 1934 Page Aerofin Corporation, 850 Frelinghuysen Ave., Newark, N.

American Society of Heating and Ventilating Engineers Guide, 1935 llisr- 3 What factors determine the dew point of the air entering the space?

American Society of Heating and Ventilating Engineers Guide, 1935 and return lines, but better practice, especially when there is much ba pipe, is to compute the emission from both bare and covered pipe surface in accordance with data in Chapter 36.

American Society 0/ Heating and Ventilating Engineers Guide, 1935 draft regulation is advisable in order to secure proper air regulation. ' It ;s necessary to supply more air than is actually required for complete com bustion of the oil, but the amount of excess air should be reduced to the lowest workable minimum.

American Society of Heating and Ventilating Engineers Guide, 1935 first radiator receives the hottest water; the second radiator, somewhat cooler water; the third one, still cooler; and so on.

J.

* _ A/C Pipe Producers Association Public Affairs Committee to /l 1.4J*-.

198k <i CANOFILED NOV 2 -1933 DO Nu 1 AuO ANY IrtlNG TO THIS PACKAGE SEE OFFICE PROFESSIONAL!!

American Society of Heating and Ventilating Engineers Guide, 1936 Further, the velocity contours, are identical for similar hood shapes when the hoods are reduced to the same basis of comparison.

American Society of Heating and Ventilating Engineers Guide, 1936 Banking.