rHHIIII iniiiI 1111 Seeaaliinng Association e.V.

Table 4.15 Fluororesin characteristics list (representative values) Characteristic Melting point Density Tensile strength Elongation Compressive strength Izod impact strength Rockwell hardness Shore hardness Flexural modulus Tensile modulus Dynamic friction Thermal conductivity Specific heat Coefficient of linear expansion Ball pressure temperature Deflection temperature under load Maximum operating temperature (continuous) Volume resistivity Dielectric strength (short term) Dielectric constant Loss tangent Arc resistance Water absorption rate Flame retardance Limiting Oxygen Index (LOI) Effects of direct sunlight Chemical resistance acid alkali Organic solvent Unit g/cm3 MPa MPa [10Deformation] J/m [R scale] [D scale] GPa GPa [0.69MPa, 3m/min] W/mK 103J/kgK 10-5/ K (-30+30) [1.81MPa] [0.45MPa] JIS K 6935 K 7112 K 7162 K 7181 Test method ISO 12086 1183 527 Same above 604 ASTM D 4591 D 792 D 638 D 695 K 7110 180 D 256 K 7202 2039 D 785 K 7215 868 D 2240 K 7171 K 7161 K 6935 A 1412 K 7123 178 527 8302 D 790 D 638 D 1894 C 177 D 696 Compliance with the Report on Registration System for Thermoplastic Ball Pressure Used in Electrical Appliances K 7191 75 D 648 PTFE 327 2.13-2.20 20-35 200-400 10-15 150-160 R20 D50-55 0.53-0.58 0.40-0.60 0.1 0.23 1.0 10 180 55 120 cm[50%RH,23] MV/m [3.2mm Thickness] [ 60Hz] [103Hz] [106Hz] [ 60Hz] [103Hz] [106Hz] sec [24hr] [3.2 Thickness] K 7226 K 6911 K 6935 K 6935 K 6935 K 7209 K 7140 K 6935 2578 IEC 60093 IEC 60243 IEC 60250 IEC 60250 62 1210 4589 D 257 D 149 D 150 D 150 D 495 D 570 UL-94 D 2863 D 543 260 >1018 19 2.1 2.1 2.1 0.0002 0.0002 0.0002 >300 0.01 V-0 >95 Non S.E S.E S.E PFA 310 2.12-2.17 25-35 300-350 15-20 non breaking R50 D62-66 0.54-0.64 0.31-0.35 0.2 0.19 1.0 12 230 47 74 260 >1018 20 2.1 2.1 2.1 0.0002 0.0002 0.0003 >300 0.01 V-0 >95 Non S.E S.E S.E FEP 260 2.15-2.17 20-30 250-330 14-19 non breaking R50 D60-65 0.55-0.67 0.32-0.36 0.3 0.2 1.2 9 170 50 72 200 >1018 22 2.1 2.1 2.1 0.0002 0.0002 0.0005 >300 0.01 V-0 >95 Non S.E S.E S.E PCTFE 220 2.10-2.20 31-41 80-250 31-51 135-145 R80 D75-80 1.25-1.79 1.03-2.10 0.4 0.22 0.9 6 170 90 126 120 >1018 22 2.6 2.6 2.6 0.0012 0.025 0.020 >300 0.01 V-0 >95 Non E E V.G ETFE 270 1.73-1.74 38-42 300-400 40-50 non breaking R50 D67-78 0.90-1.20 0.70-0.85 0.4 0.24 2.0 6 185 74 104 150 >1017 16 2.6 2.6 2.6 0.0006 0.0008 0.005 75 0.03 V-0 32 Non V.G V.G V.G ECTFE 245 1.68-1.69 41-48 200-300 35-40 non breaking R50 D53-57 0.66-0.69 1.55-1.70 0.4 0.16 2.0 8 180 77 116 150 >1015 20 2.6 2.6 2.6 0.0005 0.0015 0.015 18 0.01 V-0 60 Non E E E PVDF 151-178 1.75-1.78 30-70 20-370 32-74 160-375 R93-116 D64-79 0.60-1.99 0.37-2.58 0.4 0.17 1.2 16 150 100 156 150 >1015 11 8.4 7.7 6.4 0.049 0.018 0.017 60 0.03 V-0 43 Non E V.G G PVF 203 1.38-1.57 (82) 115-250 (1.9) 0.14-0.17 1.0 7.1-7.8 100 >1014 8.2-8.5 6.2-6.7 6.2-7.0 0.3 <0.5 HB 23 Non G V.G G Super Excellent(S.E): Not attacked by most chemicals and solvents even under harsh conditions.

Pilot-Scale Fluoropolymer Incineration Study: Thermal Treatment of a Mixture of Fluoropolymers under Representative European Municipal Waste Combustor Conditions Dr.

Annex I - List of acronyms and abbreviations Acronym AC B BBP CAS No CAS CF2 CF3 CfE CF3C(O)F CFF CLP CO2 COC(P) COP COPD CSR CTFE DIBP DNEL DBP DEHP DPIs EC ECHA EEA EEAP EFCTC EFSA EINECS ELV EMA EPA ETF EU EV EVOH XPS FBAs F-Gas FCM FP GLP GWP HCFC HCFO-1233zd(E) HF HFC HFC-125 HFC-134a Explanation Airconditioning Bioaccumulation Benzyl butyl phthalate Chemical Abstracts Service Number Technical Institute of Physics & Chemistry, Chinese Academy of Sciences Methylene Fully fluorinated methyl Call for Evidence Trifluoroacetyl Fluoride Cold Form Foils Classification, Labelling and Packaging Carbon dioxide Cyclic olefin copolymer (polymer) Coefficient of Performance chronic obstructive pulmonary disease Chemical Safety Report Chlorotrifluoroethylene Diisobutyl phthalate Derived No-Effect Level Dibutyl phthalate Di(2-ethylhexyl)phthalate (DEHP) Dry Powder Inhalers European Commission European Chemicals Agency European Economic Area Environmental Effects Assessment Panel European Fluorocarbons Technical Committee European Food Safety Authority European Inventory of Existing Chemical Substances End of Life of Vehicles Directive European Medicines Agency Environmental Protection Agency Extrudable thermoplastics films European Union Electric Vehicle Ethylene vinyl alcohol Extruded Polystyrene foam blowing agents Fluorinated Gas Food Contact Materials rules Fluorinated Products Good Laboratory Practice Global Warming Potential Hydrochlorofluorocarbon (1E)-1-chloro-3,3,3-trifluoroprop-1-ene Hydrogen Fluoride Hydrofluorocarbon Pentafluoroethane 1,1,1,2-tetrafluoroethane 1 HFC-143a HFC-152a HFC-227ea HFC-23 HFC-236fa HFC-245fa HFC-32 HFC-365mfc HFO HFO-1233zd HFO-1234yf HFO-1234ze(E) HFO-1336mzz(E) HFO-1336mzz(Z) Honeywell HSE HVAC ICCC IHX IUPAC IVD IVDR LCCP LRTP MAC MDI MDR Mln MoE NOAEL NOEC OECD OTC P PBT PCTFE PET PFAS PFC PFOA PFOS PLC pMDIs PNDT PNEC PP PTFE Proposal PVC PVDC RAC RAAF R&D REACH 1,1,1-trifluoroethane 1,1-difluoroethane 1,1,1,2,3,3,3-heptafluoropropane Trifluoromethane 1,1,1,3,3,3-hexafluoropropane 1,1,1,3,3-pentafluoropropane Difluoromethane 1,1,1,3,3-pentafluorobutane Hydrofluoroolefin (1E)-1-chloro-3,3,3-trifluoroprop-1-ene 2,3,3,3- tetrafluoroprop-1-ene Trans-1,3,3,3-tetrafluoroprop-1-ene Trans-1,1,1,4,4,4-hexafluorobut-2-ene (2Z)-1,1,1,4,4,4-hexafluorobut-2-ene Honeywell International Inc.

Comments on the PFAS proposal Zhejiang Quhua Fluor- Chemistry Co., LTD.

pro-K Fluoropolymergroup Technical Bulletin 16 Articles on the new regulation on PFAS 2 Fluoropolymergroup Articles on the new regulation on PFAS issue: May 2022 Industrieverband Halbzeuge and Konsumprodukte aus Kunststoff e.V.

REQUEST FOR EXEMPTION Our company is specialized in the distribution of intermediates, raw materials and active ingredients for the pharmaceutical industry.

Non-confidential attachment question 8 Figure 1 (cite 3): Crossover leak as a function of humidity cycles during inert RH cycling of Nafion NR-111 (S) and hydrocarbon and partially-fluorinated hydrocarbon membranes.

Bailie RARSRIATIAR, SEER i.

The real risk of each substance needs to be carefully assessed With the endorsement of the ideals of the toxic-free and pollution-free environment, EU chemical regulation is evolving rapidly and becoming more and more precautionary, moralistic, and, consequently, unhinged.

Figure1 [Pellicle] [Pellicle cross section] Film A Adhesive B Frame Mask Adhesive Figure2 Pellicle Photomask Figure Lithography Light Source ArF (193nm) Front Processes Designoo oxidation CVD, spattering photoresist coat dry etching Semiconductor Process ion injection wiring Wafer Photomask with pellicle Back Processes molding bonding mounting wafer test dicing Figure4 Exposure Light (193nm) Photomask Lens Particle photo resist Wafer circuit failure Particle Pellicle Shift the focus position.

3rd submission - Comment on Proposed Restriction of PFAS Conference of Fluoro-Chemical Product Japan (FCJ) (Regarding the requirement to provide information in paragraph 7) In paragraph 7 of the proposed restriction, the information requirement for derogated applications in paragraph 5 and 6 states that article manufacturers and importers need to provide information related to the identification of substances placed on the market.

European Chemicals Agency - Public Consultation on Proposed Restriction in PFAs Comments from Cosmetics Europe 1.

Gesendet: Mittwoch, 16.

Use of Fluoropolymers and Fluoro-Elastomers in Medicinal Product Manufacturing Facili9es ISPE (the Interna-onal Society for Pharmaceu-cal Engineering) is a nonprofit associa-on serving its members by leading scien-fic, technical, and regulatory advancement throughout the en-re pharmaceu-cal lifecycle.