The lack of risk identification may also lead to the possibilty of replacing PFASs vith non-PFAS alternatives that pose a higher risk of adverse effects on human health or the environment, and thus the Proposed Restriction may not contribute to achieving the objectives of the REACH.

Moses Kanlund Title Lead Inspector Inspector Foreman Superintendent Operations Manager (CESCL) Present in Opening Conf.

This was an EPA lead inspection supported by the Environmental Protection Division, Georgia Department of Natural Resources Staff. 8) Facility, Process and Regulatory Descriptions Everlube Products is a manufacturer of solid film lubricant (SFL) and other specialty engineered coatings, for aerospace and the military, as well as the oil and gas industry.

This was an EPA lead inspection. 8) Facility Description Rohm and Haas Chemical (RHC) is a subsidiary of Rohm and Haas Company which is in turn a wholly owned subsidiary of The Dow Chemical Company.

We have learned from other industries, including the aviation industry, that looking at safety holistically and creating redundancy is essential to preventing mistakes that could lead to fatal accidents.

Over the last four years, the Biden Administration ruled by regulation, leading to higher energy costs across the board and less American-made energy.

In 2016, 339,000 people in the EU died from respiratory diseases.19 These diseases account for approximately 4.1 million deaths per year globally.20 Respiratory diseases such as COPD are serious, complex to manage and can take a significant toll on individuals.10,11,12 COPD is a long-term, progressive disease which can cause obstruction of airflow in the lungs resulting in debilitating bouts of breathlessness.10 COPD is the third leading cause of death worldwide and is estimated to affect up to one in 10 adults over the age of 40 in the EU.21'22 Improving lung function, reducing exacerbations and managing daily symptoms such as breathlessness are important treatment goals in the management of COPD.10 Inhaled medicines aim to control symptoms, prevent disease progression, reduce mortality and improve patient outcomes overall.10 Inhaled medicines delivered to patients by pMDIs are the most used medicines in respiratory care in Europe and worldwide.

Base products as derived from those applications lead to a significant variety of end-products as required for further industrial use.

This was an EPA lead inspection.

Each ocean wave3 and even sea wind4 lead to the deposit of PFAS on our lands. 3 Polluter pays principle must be respected We call on ECHA to implement the polluter-pays principle as stipulated in the TFEU (article 191.2), the Water Framework Directive 2000/60/EC (article 9), the Zero Pollution Action Plan and the Chemicals Strategy for Sustainability.

(A flucroelastomers blend that uses polycaprolactone (PCL) + Lower cost due to lower concentration dose Superior performance in low-shear-rate applications * Lower cost due to lower concentration dose High thermal stability compared to pure fluoroelastomers (up to 300 C) |acks printability issues or potential screw slippage of PEG blends + Slightly reduced thermal stability performance compared to pure fluoroelastomers (to a maximum of 230 C) High PEG dosing can sometimes negatively impact the printability of films and lead to screw slippage * None 4.

EPA R10 (206) 553-6697 Farnham.kim@epa.gov Jennifer Caraway Compliance & Enforcement Officer Lead-Based Paint Program Asbestos NESHAP Inspection, Alpine Abatement Associates, Bingen, Washington Department of Commerce, Washington State (360) 725-2813 Jennifer.caraway@commerce.wa.gov Date of Inspection: March 9, 2022 Date of Report: May 5, 2022 Inspection Start Time: 10:13 AM Inspection End Time: 12:34 PM Inspection Notice: Unannounced Scheduled dates asbestos removal1: March 7, 2022 - March 18, 2022 Scheduled dates demolition/renovation: March 7, 2022 - March 18, 2022 Were samples collected for this inspection?

EPA Region 8 (opening conference lead) Inspector and affiliation: Althea Wilson / U.S.

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY REGION III Four Penn Center - 1600 John F Kennedy Blvd Philadelphia, Pennsylvania 19103-2852 Report Title: Inspection Date(s): Regulatory Program(s): Clean Air Act Inspection of Wheelabrator Baltimore, LP 09/07/2023 Title V, NSPS, MACT Company Name: Facility Name: Facility Location: Latitude: County/Parish: Wheelabrator Baltimore, LP Wheelabrator Baltimore, LP 1801 Annapolis Rd Baltimore, MD 21230 39.26994 Baltimore City Longitude: -76.63041 AFS/ICIS-Air Number: Permit Number: NAICS Code: Unique Project #: MD0000002451001886 24-510-1886 562213 3E23CA025A SIC: 4911, 4953 Facility Representatives: Point of Contact Timothy Porter, Director Air Quality Management Phone: (603)4982134 Email: tporter@win-waste.com Jim Robertson, Plant Manager Phone: (443)3246935 Email: Jrobertson1@win-waste.com EPA Inspectors: Parmatma Adhikari, Air Inspector, 3ED21 Phone: (215)814-2161 Email: Adhikari.parmatma@epa.gov Carly Joseph, Air Inspector, 3ED21 Phone: (215)814-2127 Email: Joseph.carly@epa.gov Scott Yanos, Air Inspector, 3ED21 Phone: (215)814-2128 Email: Yanos.scott@epa.gov State/Local Inspectors: Ronald Gorschboth, Air Inspector, MDE Phone: (410)537-4130 Email: Roland.gorschboth@maryland.gov EPA Lead Inspector Signature Parmatma Adhikari Digitally signed by Parmatma Adhikari Date: 2023.10.30 07:48:35 -04'00' Parmatma Adhikari 1600 John F Kennedy Blvd Philadelphia, PA 19103-2852 Date Supervisor Signature KRISTEN HALL Kristen Hall Digitally signed by KRISTEN HALL Date: 2023.10.31 06:06:34 -04'00' Date Table of Contents I.

System representatives stated the lead service line inventory information was submitted to TCEQ with lots of unknowns, but they did not identify any lead service lines to date.