"'/O iffllUTEC oX the General Meeting of the Asbestos Textile Institute held June 9, 1955 in Philadelphia, Pa, IN ATTEHDADCE: F.

BESTWALL GTPSU1.

'

-------------- C.

64 CHAPTER 3 1950 Guide 11.590 = 2588.4 lb per hour.

86 CHAPTER 4 1950 Guide per hour, and converting area in-square feet to diameter in inches, gives / ,vDf ,___ Qt = 3600 ft ^ x ^ y 2gh or where Qt = 19.635 KDf V2ght (52) Qt = rate of flow in cubic feet per hour.

130 CHAPTER 6 1950 Guide measurable degree the optimum conditions for comfort previously in dicated.

466 CHAPTER 20 Table 12.

574 CHAPTER 26 . 1950 Guide ASME Power Boiler Code, American Society of Mechanical Engineers.

F riction and Cap, !

664 CHAPTER 31 1950 Guide duct runs containing numerous successive outlets (usually designated the outlet run).

274 CHAPTER 12 1951 Guide Based upon the solar data of Table 5, sol-air data have been computedfor locations in clear and in humid industrial areas where the design dry-bulb, temperature is 95 F.

342 CHAPTER 13 . 1951 Guide Report 2062, Utilization of Anthracite for Domestic Heating.

772 CHAPTER 35 1951 Guide . 9,78 X 57.3 - 102 1 52.3 8.78 (5) The total coil load may be calculated from the enthalpy difference across the coil and the air quantity using the weight of dry air instead of the weight of the mixture. q% = Gm (hi -- hi) = 1700 (49.24 - 23.77) = 43,200 Btu per (hr) (sq ft of face area) where G = weight of dry air per (hour) (square foot of coil face area). hi = enthalpy of air vapor mixture entering coil, Btu per pound of dry air. hi = enthalpy of air vapor mixture leaving coil, Btu per pound of dry air.

956 CHAPTER 46 1951 Guide Fig. 2.