HEATING VENTILATING AIR CONDITIONING COIDE 1942 entering surface of a filter may clog very rapidly.

HEATINC VENTILATINC AIR CONDITIONING GUIDE 1942 ' drier decreases as a transfer of heat to the material being dried takes place.

VENTILATING AIR CONDITIONING GUIDE 1942 F` i flow inherent in the insulation itself.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 Table 4.

HEATING VENTILATING AIR CONDITIONING CUIDE 1943 higher temperatures of the water.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 the proper application of sound absorptive material within the ducts.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 too much steam to pass before its heating effect reaches the thermostat.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 A thermostat sensing outdoor conditions is used to reset inside tem peratures, raising them gradually to a point from 5 to 15 F below the highest outside temperature.

HEATING VENTILATING AIR CONDITIONING CUIDE 1943 organic and inorganic materials when in equilibrium at a dry-bulb tem perature of 75 F and various relative humidities.

HEATINC VENTILATINC AIR CONDITIONING GUIDE 1943 Large Open Hoods .Large hoods, such as may be used for electroplating and pickling tanks, should be sub-divided so the area of the connecting duct is not less than one-fifteenth of the open area of the hood.

HEATING VENTILATING AIR CONDITIONING GUIDE 1943 downward, on the side wall about 7 ft from the floor, or near the floor line.

information on elbow attenuation and amplifying the data on absorption for plate cells.

HEATING VENTILATING AiR CONDITIONING GUIDE 1944 from it at higher levels.

HEATINC VENTILATING AIR CONDITIONING GUIDE 1944 the importance of the sun load, cooling systems should be zoned so that the side of the building on which the sun is shining can be controlled separately from the other sides of the building.

HEATING VENTILATINC AIR CONDITIONING GUIDE 1944 screwed or flanged elbows or with arcs of. circles having radii five to six times the pipe diameter.