American Society of Heating and Ventilating Engineers Guide, 1932 26.8, M-m. fixtures, the riser of the 2nd floor supplied must accommodate 53.6 fixtures, the 3rd. 80.4, etc.

American Society of Heating and Ventilating Engineers Guide, 1932 level with the sill of the fire door.

American Society of Heating and Ventilating Engineers Guide, 1932 Table 5.

American Society of Heating' and Ventilating Engineers Guide, 1932 aspecified capacity and pressure varies with the type of blade, and a tip speed that is excessive for the forward curved type is not necessarily so for the backward or slightly backward type.

Expansion Joints E.

American Society of Heating and Ventilating Engineers Guide, 1934 2.

American Society o/ Heating and Ventilating Engineers Guidi Table 2.

American Society o/ Heating and Ventilating Engineers Guide, 1935 lated by the National Warm Air Heating Association (see note p. 401) are equally applicable to gas furnaces and coal furnaces.

American Society of Heating and Ventilating Engineers Guide, 1936 oversize and favored in every way.

American Society of Heating and Ventilating Engineers Guide, 1936 2.

American Society of Heating and Ventilating Engineers Guide, 1936 HEATING EFFECT For several years the heating effect of radiators has been considered by engineers in order to use it for the rating of radiators and in the design of heating systems.

American Society of Heating and Ventilating Engineers Guide, 1936 first radiator receives the hottest water; the second radiator, somewhat cooler water; the third one, still cooler; and so on.

American Society of Heating and Ventilating Engineers Guide, 1936 Fig. 4.

American Society of Heating and Ventilating Engineers Guide, 1936 Carrier Engineering Corporation, 825 Clarage Fan Company, 805 G & O Manufacturing Co., The, 918 McQuay, Incorporated, 812 B.

American Society of Heating and Ventilating Engineers Guide, 1937 F is similar to D but is for dry air, devoid of all moisture or water vapor.