American Society of Heating and Ventilating Engineers Guide, 1936 be accompanied by a change in the boiling point, and there will be a cor responding change in the latent heat of evaporation.

American Society of Heating and Ventilating Engineers Guide, 1936 6.

American Society of Heating and Ventilating Engineers Guide, 1936 surfaces made available by different manufacturers will have different transmission values.

.

American Society of Heating and Ventilating Engineers Guide, 1936 are not less than 8 in. thick, and that the inner course shall be a refractory clay brick.

American Society of Heating and Ventilating Engineers Guide, 1936 provided with two or three valves operated by the action of the trap.

American Society of Heating and Ventilating Engineers Guide, 1936 .

American Society of Heating and Ventilating Engineers Guide, 1936 DEFINITIONS Definitions of terms used in fuel heating are given in Chapter 44.

American Society of Heating and Ventilating Engineers Guide, 1936 Carrier Engineering Corporation, 825 Clarage Fan Company, 805 G & O Manufacturing Co., The, 918 McQuay, Incorporated, 812 B.

.

American Society of Heating and Ventilating Engineers Guide, 1937 (3) Manual contactor or reduced voltage compensator with overload and low voltage release.

378 INDUSTRIAL AND ENGINEERING CHEMISTRY VOL. 32, NO. 3 for the unexposed ester and the line across the bottom of the chart represents the transmission after 8-hour exposure of the wet film to the radiation of the mercury arc.

r !

PLAINTIFF'S EXHIBIT Q-.

^s, has served as it since 1931.