American Society of Heating and Ventilating Engineers Guide, 1931 shingles applied over wood sheathing on rafters, an unheated attic, and a wood lath and plaster ceiling, based on a roof having a yS pitch, for which the value of n is 1.2.

American Society of Heating and Ventilating Engineers Guide, 1931 _______________ ___ Table 1.

American Society of Heating and Ventilating Engineers Guide, 1932 62 Chapter 3--Heat Transfer Through Materials and Constructions Table 31.

Scale O Maximum Temperature b \ff*rc n c t A ir Inn&e and Out*td (t-ta)-D*?.

American Society of Heating and Ventilating Engineers Guide, 1932 coal having a calorific value of 12,500 Btu per pound is fired, arid the over-all heating efficiency is assumed to be 60 per cent, how many tons of coal will be required for a normal heating season, neglecting other heat sources, and any loss of heat through open windows?

American Society of Heating and Ventilating Engineers Guide, 1932 McMURRAY, John (Af 1920), Iron City.

American Society of Heating and Ventilating Engineers Guide, 1934 with dry- and wet-bulb temperatures of 65 F and 59 F, respectively, (63.1 deg ET) must be supplied per hour to an auditorium containing 1000 people in order that the inside shall not exceed 75 F (dry-bulb) and 65 F (wet-bulb), respectively?

American Society of Heating and Ventilating Engineers Guide, 1934 peak load and will materially increase the capacity of the fuel-burning equipment for the boiler to which it is connected.

American Society of Heating and Ventilating Engineers Guide, 1934 separate top and bottom halves.

American Society of Heating and Ventilating Engineers Guide, 1935 Table 9.

American Society of Heating and Ventilating Engineers Guide, 1935 ~~ If three persons are assumed to an apartment the total daily use of hot water shn la approximate 0ul(* 20 X 3 X 40 gal = 2400 gal and if the peak hour is .10 per cent of this amount, the peak hour by this method shows probable demand of one-tenth of 2400 gal, which indicates that the values in Table 7 are'safe. ... '< PROBLEMS IN PRACTICEb 1 Why is it impractical to size water,supply piping so pipe friction will pro duce an equal pressure on each fixture?

American Society 0/Heating and Ventilating Engineers Qun^,'l935 In order to determine the amount of radiating surface necessary to maintain the MRT at 72 F, assume the surface temperature of. the hot plates to be installed to be 200 F, which is approximately the temperature they would have if heated by steam.

American Society of Heating and Ventilating Engineers Guide, 1935 VALVES, Safety American Radiator Co., 780-783 Baker Ice Machine Co., Inc., 747 Consolidated Ashcroft Hancock Co., Inc., 838 Foster Engineering Co., 938 Jenkins Bros., 939 J.

American Society of Heating and Ventilating Engineers Guide, 1935 WALKER, J.

American Society of Heating and Ventilate Engineers Guide, 1936 428 Chapter 24--Gravity Warm Air Furnace Systems the Warm Air Research Residence of the National Warm Air Heating and Air Conditioning Association erected at the University of Illinois?