American Society of Heating and Ventilating Engineers Guide, 1930 Table 10.

American Society of Heating and Ventilating Engineers Guide, 1930 o. 00 I-- to to Per Cent.

American Society of Heating and Ventilating Engineers Guide, 1931 Relative kinematic viscosity...;________ Time in seconds obtained from a vis cosity measurement with a specific instrument, from which viscosity may be computed by appropriate formulas______________ _______ ______ v/vw . / Symbols for General Thermodynamics Mechanical equivalent of heat______ ... j Heat equivalent of work________ 1/J or A Ordinary temperature, F or C (6 is pre ferably used only when t is used for Time in the same dis cussion)0 (theta) or t Absolute temperature, F abs or K..0 or (0 (capital theta) is preferably used ' only when 6 is used for ordinary temperature].

American Society of Heating .and Ventilating Engineers Guide, 1931 6.

American Society of Heating and Ventilating Engineers Guide, 1931 13Table .

American Society of Heating and Ventilating Engineers Guide, 1932 )Table 16.

American Society of Heating and Ventilating, Engineers Guide, 1932 Table 32.

American Society of Heating and Ventilating Engineers Guide, 1932 where X = cost of heating with coal in dollars per million Btu. c = cost of coal in dollars per ton.

American Society of Heating and Ventilating Engineers Guide, 1932 Some burners are adjusted for oil rate by means of a blind needle valve that can only be operated with a special wrench; others by changing the size of the orifice; others by a combination of orifice size and pressure.

American Society of Heating and Ventilating Engineers Guide, 1932 Air at any temperature and moisture content may be considered as having a certain definite total heat in thermal units per unit weight as calculated from some arbitrary base, such as zero moisture and zero temperature.

American Society of Heating and Ventilating Engineers Guide, 1932 basis of 15 sq in. of flue for each 100 cfm.

American Society of Heating and Ventilating Engineers Guide, 1932 2.

American Society of Heating and Ventilating Engineers Guide, 1932 MYRICK.

American Society of Heating and Ventilating Engineers Guide, 1934 should be multiplied by the roof area and not by the ceiling area.

American Society of Heating and Ventilating Engineers Guide, 1934 Table 2.