Document zzMBKEjx6vVBbMnJG4gyqRDya
THE SOCIETY OF THE PLASTICS INDUSTRY, INC.
250 PARK AVENUE NEW YORK. NEW YORK 10017 212/687-2675
Contact:
Jerry Blizin (202) 638-2800
E.S. Nuspliger (202) 347-3000 Ext. 1032
FOR IMMEDIATE RELEASE (TUESDAY . JUNE 25. 1974)
PLASTICS INDUSTRY PROPOSES EMPLOYEE HEALTH STANDARD
Washington, D. C. -- The plastics industry will pro
pose a new standard for employee safety in the vinyl chloride
and polyvinyl chloride industries at public hearings this
week before the Occupational Safety and Health Administration
(0SHA). The industry proposal calls for a stepped reduction
of permissible levels of vinyl chloride in workplace air.
According to the industry, its recommended standard will
be feasible over the next several years, assuming the devel
opment of new control technology.
The imposition of a "no detectable level" of
vinyl chlo
ride, as proposed by OSHA^would shut down the polyvinyl chloride
industry and could result in an overall loss of 2.2 million
jobs, an independent economic survey will report.
Vinyl chloride has been linked in recent months with
angiosarcoma of the liver among previously heavily exposed
workers.
BFG24318
23217031
2- -
The industry proposal, prepared for presentation at the
OSHA hearings by Anton Vittone, chairman of The Society
of the Plastics Industry's (SPI) Committee of Vinyl Chloride
Monomer (VCM) and Polyvinyl Chloride (PVC) Producers, and pres
ident of B. F. Goodrich Chemical Cb., recommends:
For PVC Resin Plants
. .. Effective October 5, 1974, a ceiling of 40 parts per million (ppm) of VCM and a maximum daily time weighted average of 25 ppm. Levels above 40 ppm would require the use of practical and effective respiratory protection.
... Effective October 5, 1975, a ceiling level of 25 ppm with no time weighted average. Levels above 25 ppm would require the use of practical and effective respiratory protection.
... Effective October 5, 1976, a ceiling level of 25 ppm with a maximum time weighted average of 10 ppm. Levels above 25 ppm would require the use of prac tical and effective respiratory protection.
For VCM Producing Plants
... Effective October 5, 1974, a ceiling of 25 ppm and a maximum time weighted average of 10 ppm. Levels above 25 ppm would require the utilization of practical and effective respiratory protection.
... Effective October 5, 1977, a ceiling of 10 ppm and a maximum time weighted average of 5 ppm. Levels above 10 ppm would require the utilization of prac tical and effective respiratory protection.
Mr. Vittone said: "Such a commitment cannot be accom
plished overnight since, in certain areas, the technology
BFG24319
23217032
-3-
for accomplishing it is, as yet, not developed and, when developed, facilities must be installed requiring time for engineering, procurement, and installation."
He emphasized that the Committee is unanimous in its po sition that OSHA's proposed permanent standard of "no detec table level" is not technologically feasible and, if adopted, would shut down the industry.
Ralph L. Harding, Jr., President of SPI and the scheduled lead-off witness for the industry group, said, "The companies represented here today are sincerely concerned with providing all appropriate and necessary safeguards. They have already achieved substantial improvement in their operations. They are preparing to do whatever is deemed necessary in the way of substantial modifications to plant, process, and product.
"They have a very strong personal stake in the medical facts and in the safeguards. Nobody has to remind them of their responsibilities to their fellow workers."
Jerome H. Heckman, SPI1s general counsel, will follow Mr. Harding with an overview of the plastics industry's po sition with respect to the vinyl chloride problems which in cludes. the following:
... OSHA may rely on the plastics industry to recognize that so long as any doubt remains as to safety levels
BFG24320
23217033
-4-
and employee or other exposure, it is incumbent upon manufacturers to make the workplace and general en vironment as risk-free as feasible.
... SPI believes it essential that any final standard adopted by the government take into balanced account the full spectrum of public and employee health con siderations, social and economic impact, as well as other public interest factors.
... At this precarious state of its knowledge SPI be lieves that misplaced reliance on mere suspicions rather than proven data, or precipitous and emotional reaction to such incomplete information, together with a narrowly construed interpretation of interests, could lead to major economic consequences.
... The plastics industry has moved responsibly in all respects to obtain hard data and to plan to deal promptly and effectively with the vinyl chloride question.
The next scheduled witness--Vince P. Ficcaglia, manager
of economic analysis and forecasting of Arthur D. Little, Inc.
(ADL) of Cambridge, Massachusetts--will summarize the conclu
sions of a recently published report by Arthur D. Little, Inc.
prepared for the VCM and PVC Committee titled "United States
Polyvinyl Chloride Resin Industry Impact Analysis":
... An immediate shutdown of all polyvinyl chloride (PVC) resin plants in the U.S. and the subsequent unavailability of PVC resin could result in a loss of 1.7 - 2.2 million jobs in consuming and related industries and a loss of domestic production value of $65-90 billion annually.
... The extent to which materials could be substituted for PVC resin in the immediate term (less than one
BFG24321
PVOLIZVZ
5
year), we believe, is quite limited and, therefore, would have an insignificant effect upon reducing the potential job and domestic production losses noted above.
.. .
Because of the high degree of dependency on PVC resin in the building and construction and motor vehicle sectors, these two segments of our economy would suffer the greatest share of the total impact.
...
Unavailability of PVC resin will have production bottleneck effects in terms of insulated wire and cable, flooring, upholstery, and many other materials.
... The economic impact of loss in production and employ ment would be felt by all regions of the country.
Other major points to be raised by industry witnesses
testifying on behalf of SPI include:
... On the basis of the available evidence, it would appear that the national incidence of angiosarcoma of the liver has been underestimated in the past.
... A medical survey of present and past industry em ployees shows, in general, no greater indidence of liver abnormality, even among long term employees, than exists among the general public.
... The use of air supplied respirators, as recommended by OSHA, to reduce worker exposure below permissible levels is an impractical substitute for feasible en gineering controls, except for short periods of time or in emergencies.
... Since there is no single reliable method for the detection of liver abnormalities, medical examina tion proceedures should be left to the discretion of the examining physician.
... Since levels of vinyl chloride in the air of PVC fabricating plants are, even today, extremely low, the full requirements of the proposed standard should not be applied to the fabricating industry.
23217035
BFG24322
-6-
labels and signs proposed by OSHA are unnecessarily
alarming and should be changed to stress precautions
that employees should take for the safe handling of PVC resin.
/
BFG24323
23217036