Document zzKpvg84z5YzLBa3d6ma8kaeR

o ALUMINUM PAINT.............................................................. 28-24 ASPHALT PRODUCTS......................................................... 2$ AUTO FINISHES................................................................. 22 BARN AND ROOF PAINTS........................................ 11 COLORS IN OIL...................................................................... 26 ENAMELS AND UNDERCOATERS.............................. 18-14 EXTERIOR HOUSE PAINTS..............................................4-5-6-7 FLOOR PAINTS..............................-...................................... 8 'L7~QH JAPALAC PRODUCTS............. ..................................... METAL PROTECTIVE PAINTS-------------- ._----------- U-1248 MISCELLANEOUS PRODUCTS ft SPECIALTIES.... 24-25 PRIMERSEALER................ 27 REFLECTOUTE.................................................................... 27 SPRED........................................................................................ 27 STAINS, FILLERS, REMOVERS....................................... 1A20 TRUCK, TRACTOR ft MACHINERY ENAMEL.... 22 VARNISHES................ 16-16-17-18 8-9 Product A Ad-El-Ite Non-Inflammable Paint and Varnish Remover____________ Ad-El-Ite Paint and Varrish Rrow Ad-EWte Paste Wax............................ Aluminum Paint--Japalac -................ Asphalt Aluminum Root Coating____ Asphaltum Varnish, Black ______ Automobile Enamel 22 19 19 24 21 24 17 INDEX (Itemised) / Product Pott Glid-Sesl.. '......... 18 "'idtite, Galvanized Iron Primer____ 12 oes WaJI Finiih._______ 9 ........... li Graini^ Sgodtltiea-Japalac........... 21 Greens (Trim and Trellis)J-_-_--_-_--_-* 5 H Product Foot B Rapidcote--Varnish..................... Red Lead, liquid.;.._______ _____ Reflect-O-Iite Paste Paint. ________ RipoHn______...__ ______ _______ Rockspar--Varnish._______ ______ 16 13 27 is 17 sAwMksMMHL...._____ 9*> K60C Paint----- ................ 24. Bar and Table Top Varnish_________ 16 . Bam Paint, Endurance 11 / Basocoat--Endurance Exterior_____ 6/ Basecoat--Speedvail Interior_______ 9 Black Asphaltum______ ____________ IT Blackboard Slating_________ _______ 28 Bleach (Wood)....................................... 85 ftsilUafrt Celera (PaaU)c-->99 Bronzes--Japalac ................. '..J 21 " ouperwr________j. IT. ..... A 29TM louse Paint Primer--Basecoat_____ 6 - . Sv- lousehold Insecticide-- Glid-N_____ 28 Screen Enamel-Japalac_____ ____ 21 fUaWta"*- - '-i ~~ Vn T ~ L Interior Varnish.................... ............... ,lj> Iron Primer____________________ ... 12 ' Japalac........ ...............................a TM". Japan Drier_________________ __ Japepar--Varnish................. j..____ / Knot Sealer6 K V. '* 199 **!.............. . !** --------if - ss wlSttJ............... -.--wA ? 22 :#$- -.*$ . {' Cement Coating and Mixing Liquid. Chromatized Metal Primer_________ Colon in OB............................... ,C.... Concrete Paint (See Pli-Namel)_____ Creoeote Paint__________________ ... 6 12 26 8 7 s, UDJD3.T, Insecticide--Glid-N............... 28 Voe_eyTsne Oclars (HI FaeBtaitK-'':--" 10" DTniter, Japan 17 Driwal 7 E; Enamel--Japalac______! Endurance PreparedJKpuae Paint... Endurance Imp ` Endurance " Endurance Fndnwnsn RTi loose! m J"HknTut.a....w.....f..i&ft.-JXL______ 1..9.....-- s If-IWIT nUw . v X erA'4X* **%* W ' 28 net/ 8 fc 11 MMiBb t . IL&t^ Lik-A-Rub--Varnish______________ linoleum-Slick Lacquer_____ _____ Linoleum Varnish........... 24 16 16 Bpred Primei^SeaJ*\ri&~* --------- --27 Spred Satinj..______ Liquid Cement Coating and Cement Stors and' Iron Enamel_______ _____ 2l! Coating Mixing Liquid.............. 6 ovfican........... ;................ 29 Liquid Cleaner--GBd-N 28 Superior Spedene Enamel____14 liquid Red Lead..................................... 18 liquid Wax-Glid-N.............................. 28 M Masticrete_______ Masticrete Primer................................ 26 lifrinigiMj'' BSilln................ **- MetalPrlmer......... ............................. 11 MetaUte, Interior and Exterior .____ 28 OWlliMflk..|....... i~............................... ; m29ft . *RT* Tinners' Painta.\___________________ 11 Utan-O-Zinc Outride White. _______ 6 Titan-O-Zinc Paste _P_a__int_____________ 6 Touch-Up Black______22 Trim and TreDie Color*........................ 6 TTrruucckk,, TTrraaccttoorr aanndd MMaacchhihnMerqyr EntiniJ, ,, ______ _____- 22 Tube Color*..________________26 N Ner-ARot....:......... ....i.......... #*6 Nsv-A-Rust........ .............. ......... -'.-Ill Vapoel., VarnWj] gSwi?! VSamatiCi r 1* . ` -r7l t S>Sn .` ; v. > r ' ji(.0025}98 m. d&t -:'Ui-\y {.' .: i ' rffiii^ljhiyV^fornifr^i iiTi ny^.r^ymn ~ij. / &' ?v r - * ; * -.-i':/. *;'*! i*" : 2tl ':?V- EXTERIOR HOUSE JPAINTS 'VlL:-- . ' / 0RANGE PREPARED/HOUSE PAINT Qm/TUstie Gresn. prpbu Tteta--*4 bourt-48 hour* for recosting. ,,ri:-. ^.VtC#**ro#*--Apply at a spreading rate of 660 square feet per gallon. Ayr-Kca***-^ thoroughly Wore using. *-3^ " ""'OW Arfaisd S/aoM-Remove loose paint, scales, blisters and < TS?.^ r-BaM Coat, or paint reduced a* for new surfaces. |;Ki3'V ,.. second Coat--Add small amount of turpentine. Surface must be dry. All bare wood should receive a coat of 5v: aha Coat-Apply paint a* received, full body. . f i2ri;jK__aV . v. Vnpetnlsd* S" ur/actt---Vf E"*nd*urance B"ase Coat for pr 'If not available pK^/ahfo&ws: Foryeflow "Sk - .:;- r,--a-a---j-,n---in---t-r--akw linse*ed ou^and.tw* opints *turjpi en*tivne-toja galloj n, of>An For white pine, fir and eoftwooSt add I quaitwwl '" : >t tfuartp^eintitninee to a gaaaMlloonn of ppariinnt Allow to dry three daayys* ovpToneer. .s. . r--.. S#*- Second Coat--Add <me pint turpentine to a gallon of paint/Allow to dry three days or longer*/*. - ' . ThW Coat-Uae paint aa received, if too heavy, add equal amounts of linseed oD and turpentine to produeeths&idbody. ~ - tr v *. > w:_ ^ KK2W^r'`* ..*Y. *. T^i-t Outside and Inside Flat White Begalar Shade* and Black------ CryBfht Green......................... .. . . 5's per gal. i'.:' -- *-- s' : . .. :r-i TSSiaLK<&.. x.imjz si>. *% . ' '. "5s ENDURANCE IfM P E RIA L HO rr#* TppsqfProrfact-An exceptionally high grade finUh for exterior surfaces. FofmulaittMSi ffrr^2W&Miast &M, ,, . jye.*' nv One Co** coverage for repaint work when the surface to be recoated is in good condition K wfc-J-a..- Tamii**4--2*%i* h1o...u.--r*. . , - "*' ^ ,. .' Coseraps-660 square feet per gallon. / m?: Application--Stir thoroughly with a lifting motion. Do not add thinning oik or other paints w ti produet. Us as'Whlte otdj^Do H not tint. / .%.. . .i -- Swfae*t Prttioutly PfHied--All loose paint, scales, blisters and dirt should he removed. Maks sura surface is dry. Bpot-coat^bitre place* with GUdden Exterior Base Coat No. 1861. IfAbe surface is porous or weathered, apply a coat of GUdden Exterior Base Coat No. 1861 over the entire surface. Allow to dry at least 48 hours under good drying conditions, then apply Endurance Imperial House Paint, fall body. I Tioo-Coat SytUm for Nov Unpainted Surfacet-fPrimo cost--Use GUdden Exterior Base Coat No. 1861 at a spreading rat* of 460 iquarefeet per gallon. J Second Coat--Use GUdden Imperial House Patvt as a finish coat without thinning, at a spreading rata of 660 square feet per gallon. Ifcf; White. 5's per gal. HJI I'g each $8.48 Vi's each $1.8$ L$k'*'/ E V ifONH OUSE PA IN T 5>aiat for exte iorue* whar* economy Isa cc^paideratiou. This matarialcan also be used inside the Ipuuiy other artidS. T: LV^i' ^ rrmm alkfsst ihree coat*. TThhee!first coat r_____ third L, ....., $&*- tta-ftrag^'wlth .p& of IjNea^l Uittr'A hattgj^p^wpantlna to { i redueed with a quart ofj^ylHttaead oBi i apply Evwron House Ptfsf ap.gamlved; -.^.Pteiojjtfti>o_fepaa- t ......... L*0tf.( jsag o.-vj GttiU2539^) m S-, >1 >ff ENDURANCE TRIM Drying Tins--24 hours--48 hours for recoating. AND TRELLIS COLORS ornamental iron. trdHsea, porch furniture, ete. 1 and light Yellow. ' Coveragr--Approximetely 700 to 760 square feet--mm coat. /tppZfeirfion--Stir thoroughly with a lifting motion. OW Paixltd Sur/oru--The surface must be dry and free from dust dirt r .si] foreign matter, Looee paint, scsles and blisters should be removed. Tha entire surface should be given one coat of Exterior Base ~ t before applying trim colors. Ntv Vnpatnied Surface* ~Uus Exterior Base Coat for priming, allow! 18 hours for thorough drying. On a two costjob, ExteriorBase Coat ean be tinted to approximately the finishing color by the addition i applied over the Exterior Base Coat should be reduced with a pint of full body as received. Allow at least 12 hours for thorough drying between ure Colors in Oil. POr a three coat fob tha first eoat of color Rtlne to a gallon of paint. The third boat should be applied Royal Bed No. 3-Light Yellow No. 87................$SJty Shatter Green No. 71............................................ J........... Other Colors......................... ................... ............ /........... 1'e each Ml Ml Vi's each IMS 1.98 Mt Wa each IUI I.W UU o TITAN-O-ZMIC OUTSIDE WHITE JVp* of Ptodud-Uad* of titanium pigments, pure tfrt oxide, specially treated linseed cQ with |dHE the r^amount of dri This product covers and hide* better then ordinary it--one coat is equal to two coats of ortowmittrMtflia'when approver a first cost of our Exterior Base Coat produces a perfect o-eostjob. beauty riirough^t'theli^s'of thB^kt^This^oduct * is injurious to livestock. Ideally adapted for ^ !*"* ** * Drying Time-- 24 hours--48 hours or more for Dating, Carnage--700 to 760 square feet per gallon-oi i coat. Application--Stir thoroughly before using. Old Painted Surfaces--Remove looee paint, Basecoat, or paint reduced as for new surfaces. fee, blisters and dirt. Surface must be dry. AH bari wood Second Coat--Add small amount of turpen Third Coat--Apply paint as received, full New Unpointed Surfaces--Use Exterior t. If not available, proceed as follows: For yellow pise or erprese, add i plat raw linseed oil ana<d two p. ints turp. entine to a gallon i >f paint. F"or white pine, fir and soft woods, add 1 quart raw lihseed oil ana 1 pint turpnatine to a gallon of paint. Allow to dry three days longer. Second Cost--Add one pint turpentine tb a gallon of paint. Allow to dry three days or longer. Third Coat--Use paint as received, if t/o heavy, add equal amounts of linseed oil and turpentine. Titan-O-Zinc Outside white 5's per gal. $5.36 l'eeaeh $5.45 %'s each . J?;. ZiNC-O-LITH HOUSE PAINT o Type of Product--A perfectly bjyanced formula. The pigments are mound in refined linseed oil and a pale liquid dryer. $ is a 'white that stay* white, with a maximum of opacity, easy Tforidng qualities ana long life. .- ' Drying Time--24 to 28 hours-^t8 or more for recosting. ''t Coeercyr--700 to 760 square feet per gallon--one coat. AppMeoikm--Stir thoroughly/using a lifting motion. :,n ' 'v., Old Painted Surfaces-- Make/sure the surface U dean and dry. All looee paint should be scraped, wirebruthed or burned, applying paint, first Coat: Add/I to 2 pints of raw linseed oil and about 1 pint of turpentine to gallon of paint, depending on i of surface. Allow three days to dry in good weather. Second Coat--Ad d Iv oainr as it cornea from the ean. add one quart of raw linseedybil and two to three pints of turpentine~to tha gallon of paint. For White Fin* Fir djft or three pints of raw linseedpO and one to two pints of turpentine to the gallon of painVAHow to dry three days mi Second Coat--Uee about one pint of turpentine to one gallon of paint. On soft Wood red one pint oft on to tha gallon of paint; Allow to dty three days In good weather. . . - Third Coat--Use palnx at it comae in the can unlaw paint ha thickened somewhatm which case H may be] half pint of raw linaeed ojl to the gallon. : ,W EXtER10`lg#A;S^.CaA|^'>; : ;/'T' fVp* */ Ptoiud-AwSi jnbducsthe elasticity, the asbestos wall sidings, or poroi .eahyeorrect prtmar and first eodtir to both u* sad otywororrVit. Masddesffrrom ispecially prepared otifto and to control penetration that is so naceseag to < or point Job*. Also an excellent primer for3: surfaces. Drying Tim*-18 to 24 hours--48 or mors for recoating, Csesrops--650 to 600 square feet per gallon--one coat, AwOcoHo*--Stir the paint thoroughly with a li/ting m_o_t_io__h. All s. ur_f_a_c_e_s__th_o_<. be perfectly dry and free from all foreign matter. Under normal conditions. Base Coat should bo applied wnthout reduction aithougjy thinning 10% with turpentine improves world** cqa- during extremely hot weather. * .. . 0|f Pointed Surfam-Remove loose paint by scraping, win brushing or t off where necemhry. Be sure the sorfact is perfectly drft'AtiKr Base Coat to aU sections that have become bared by bUsteriag, agoing o*r peeling and to toe antir* surface if th* CMjttint H ^ and badly weathered. : Vnj>ai*ted Sitr/hess-Use Base Coat full body, without adding an/Uquid. ' Two-Coat System - Titan-O-Zine or Endurance House Paint are tbe/pedfted paints to be used without __ ______ eoat cTcr Base Cost for a specified two-coat job. To secure proper film thickness cm a finished two-coat job. Base Cost should be a* a spreading rats of about 460 square feet of surface per gallon. The usual thrse-coat specification* on nsw vork itreeomi produces longer life. Easit ... For a two-coat system, it is a good practice to tint the base coatjfeith pure eoiore in oil to approximate shad* of fltdshlag matwhen esters other than white are used for the last coat. / .< / ' C's per gal. l'aeach ' %' 'A*".* ** -:-A Exterior Baaccoat............... ...................................../.------ -- ${.S5 V" IUI tc.rPfXg&SiC&X.t&Z - . -* KNOT^ SlALEIt vi ^ U / (Vi - "Hr ,.:y w j t j /y v '-wjc&K*- --Approved by. Wtfltera Pin* AaeocUtkm Jb tfulfag knot* to pftrt&t hliiilnr * *** ** --1 ^ coats of paint. Also \ InDleodlnttt!n*e / . rVi#- l'* 4aeh ' * Y % WiSuli'Oa saite- ........................ / v......' **' ' *HY .LIQU.I'D MtMTCO ATI................ --Used to make demp-proof and uniJbrm la color, eatotoaiSN tile, SSek and stone, without changing surface texture, frodubea a ] appearance of cement and stucco surfaces. /"?>*' "` .. : Drying Tlias--18 to 24 houra-48 bourn or more recosting. ; . /.i,'!' Cms t c s *--400 to 600 square feet per gallon. / Application--Pour of one-third of the liquid and dbmpletely break up and put Into thorough i of the package. Replace Bquid, stir thoroughly before ana during use. Any surface which shows indications of alkali should receive a wash coat made by dissolving two pot&di of sine i a gallon of water. Apply freely and allow to dry tlmroughiy. n V; Old Painted Surface*--Remove loose paint, touch up bare spot* as recommended for prime coat on newwcrk, then appiyenei of liquid Cement Coating. ' Ifar Unpaixied Surfaces--Fint Coat. To < be applied liberally and brushed well into receive a second coat. Allow these spots uhifonhly. 6's per gsL l's each Liquid'Cement Costing......... /_________ .......................................................... S6.M $5.46 4L^: CEMENT/COATING MIXING LIQUID Type qf Product--This material is a Ugh/ colored, - ,: easily under the brush. When spread in an v 3 *a S*p"a-r Varnish. I1t is obvious that ^vu$dd>s specified. drying liquid of shout the same gravity as linseed oil and will it dries in about eighteen hours, fortning a tough, elastic film i ^MMqjlatSne or betudne are whdly unsuited for use when GUdden i--GUdden i, such as first t PO-QsWB* ] , and uneven) rw.theee pu ildot < used ia . ,, GUdden liquid Cement Costing as a thinning on Woodwork; a priming coat? in conjunction with GHdden Ltquu nt surfaces, wi_____a_r_e_t_o__b_e brought up to the fsneral level with GUdden <_____ with equal part* ef.GBddea liquid Cement Coating of (had* selected, to each i of ITurpentin*. . .. ..ci.:45 . t-.| (Uqa 4t.< -- [AaN. --A0. -ii^a >^k 'ml s^- Jk~ I'.R ;> ft ->-VJ tri>: :GLD025401 o n ENDURANCE WHITE SEMI-PASTE Type of Product-- One gallon of this Semi-Paste mixed with one gallon of linseed oil makes two gallons of paint Teady for use. It i tains the essential pigments found in Prepared Paints and produces the utmost in long life. Drying Tim*--18 to 24 hours. Should not be recoated in leas than 72 hours. Coverage--After reducing, coverage is estimated at 700 square feet per gallon. Application--Same as for Endurance House Paint. 6's per gal. Endnrance White Semi-Paste........................................... |0AK> I s each $6.10 YTe each $1.76 n DREWAL Type of Product- A damp-proofing and stain-proofing material designed for application to limestone, stucco, sandstone, concrete, brick and other porous surfaces It penetrates the pores of the surface to which it is applied and lines them with an insoluble substance which makes them fully water-repellent. Does not change texture nor discolor the surface/Contains no paraffine. Drying Time--About 2 hours. Coverage--Oa cement, concrete, stucco and brick approximately 126 to 176 squa/e feet per gallon for first application and from 176 to 226 square feet on second application. On atone-between 176 and 226 square fmt per gallon for first application and from 226 to 276 square feet per gallon for the second application. Applicatlon--Brush or spray. Clear. Heavily Bodied... White . 5'a per gal. $2.65 2.75 . 4.85 l's each $2.66 2.85 4.65 O c ENDURANCE SHINGLE STAIN Type of Product--Supplies modem, colorful roofs or siding i [minimum cost Shingle Stains produce a soft, rich effect on the roof and rive extra protection. They withstand the severest weather r~ editions, maintalningtheir attractive shades without fading or streaking, These Shingle Stains prevent decay, and preserve the life of i rood shingled house, use to beautify and protect. Drying Time--24 to 48 houre. Coverage--Approximately 150 square feet per gallon. Application--By dipping, bruah or apray. Stir thoroughly before using. Be sure surface is dean and dry. Old Work--On all old work the shingles must be bnuhed and particular care should be used to see that all portions, particularly the edges, are well coated. Two coats are recommended. / New Work-- The moet practical way to stain shingles is to dip them into a container which will accommodate at least a dozen or more at one time. Then remove them to another receptacle or trough and allow to properly drain. Tide process will afford protection to all exposed surfaces. For dipping, two gallons of stain will cover about 1000 regulation size shingles with a M dip. For brushing 160 square feet is a conserva tive estimate. Dark Brown, Maroon and Red. ....................................................................... Light Green, Medium Green/ Dark Green..................................................... French Gray, White........... J............................................................................ Contra Bine...................... ./.............................................................................. 5*s per gel. $2.75 3.25 3.55 4.15 l's each $2.85 3.35 3.65 4.25 o HITE CREOSOTE PAINT Type of Product--An excellent lo' cost exterior paint for exterior wood surfaces, fences, bams, out-houses, sheds, etc. Adapted particularly for farm use because it is ion-poisonous. Produces a dead flat finish. Has a preservative effect on wood. Drying Time--24 hours. Coverage-225-820 square feet pef gallon, depending on type of surface. Application--Apply by brush or/spray. One coat is all that is required. Just as much should be applied to the surface as will give solid covering. For brush application, reduce j&ith H gallon of Mineral 8pirits and H gallon of raw linseed oO to the gallon. For better durability use M raw linseed oil but no mineral spirits. For spray, reduce with the s^me liquids in proportions that will give free flow of the paint through spray nosale; White Creosote Paint. 5*a per gal. $4.05 l's per $4.15 GLD025402 s FLOOR PAINTS FLORENAMEL Type of Product -- For either i aside or outside use. Should not be confused with the ordinary line of floor paints as it is distinctly dif ferent. It U especially adapted for finishing old and worn linoleum, new or painted woodwork, furniture, cement and inside or outside floors and steps. Drying Time -12 hours, 24 or more for recoating. Coverage-- 500-600 Bquare feet per gallon--one coat. Application--Stir enamel well before using. Be sure surface is clean and dry. Remove polishes, wax or grease by washing with turpen tine. When washing cement with Zinc-Sulphate, allow to dry thoroughly before painting. Inside Floors, Linoleum and Furniture--Reduce the first coat 10% with turpentine. Allow to dry overnight, then apply second coat as it comes from the can. Cement Surfaces--II cement is new, wash with a solution of two pounds of ainc sulphate to a gallon of water to neutralize alkali in cement. Reduce first coat slightly with turpentine. Apply second coat as it comes from can. Porek Floors and Steps--On surfaces previously painted apply one or two coats if desirable. Allow overnight drying between coats. On new or unpainted surfaces use Exterior Basecoat as priming coat. follow with one or two coats of Florentine!. Allow two or three days for Basecoat to dry and overnight between coats of Florenamel. Boiled linseed ofl may be a dded 1 pint to a gallon for greater durability. / 1's each All Colors.............................................. ................................................................ $5.25 Vi'* each $1.55 / PLI-NAMEL Type of Product--A true plastic, the product 61 a chemical combination known as "Polymerisation," which gives it outstanding per formance. It is highly resistant to acids, alkali, moisture, severe fume conditions, oil and grease. It is the perfect finish for concrete floors. Pli-Namel resists water and the action of alkalies in the concrete. It has good resistance to abrasion, good adhesion and is sufficiently hard to resist wear. It is an anti-corrosive, and protects against the deterioration of metal. Drying Time--Seta in 30 minutes and driw firm overnight. Coverage--400-600 square feet per gallon/- one coat. Application--For Concrete--Remove oil/and grease with alkaline cleanser or steam. Then etch with Sard Flush, applying powder to wet floor by shaking it directly from can; dr, a solution of one quart muriatic acid and three quarts of water. Flush with clear water to remove any excess sani flush or acid. Thin/first coat Pli-Namel 10% with pure turpentine to increase penetration. Apply second coat full body after first coat is thoroughly dry. Under good drying conditions allow second coat to dry 48 hours before the floor is subjected to severe wear. / For Metal--Surface must be clean and dry. Wire brush or chip corroded metal. Apply primer coat of No. 1526 Chromate Primer. This base coat will insure good adhesion; allow to dry before applying Pli-Namel. Then apply Pli-Namel full body. Do not use Pli-Namel on surfaces subjected to high heat. Cannot be tinted with Colors in Oil. / l'seach Vi's each Regular Colors___/............................................................ `................................. $6.75 $1.92 White.................../............................................................................................ 7.45 2.10 Black. ... _./. 5.60 1.67 WALL FINISHES SPEED-WALL FLAT Type of Product--The finest Flat Wall Finish possible to produce. Heavily bodied, this paint flows freely and is self-leveling. Remakeable hiding power alone places it far above ordinary wall finishes. Proper blending and the select grade of ingredients, account lor the long wearing quality and unusual hiding power and covering capacity. This paint dries to a beautiful smooth finish. Viewed toward light there is a slight sheen--desirable because it permits easy waahinj . but with no more sheen than is permissible in the best Flat Wall Paint. In addition to the popular White there is a wide selection of delict' and rich shades suitable for the most artistic decoration of walls and ceilings. Drying Time--IS hours'--24 for recoating. Coverage--400-4&0 square feet per gallon--one coat. Application--Stir thoroughly with a lilting motion. '. On Piaster Surfaces-- Be sure surface is dry and free from dirt, grease and loose particles. All new plaster or cement walls that show indication of alkali or actiVs lime after testing with Phenolphthaline should be given a wash coat of Zinc Sulphate solution (two pounds of Commercial Zinc Sulplate dissolved in one gallon water). CM Painted Surfaces^- Walls--It old paint has become porous and worn with age and repeated washings, apply a coat of Speed-Wall Interior Base Coat and then proceed as recommended for New Unpainted Surfaces. If old paint is in good condition, one coat of Speed- Wall Flat is often sufficient. If two coats are considered necesssuy, apply a first coat of Speed-Wall Flat mixed with equal part* of SpeedWall Interior Base Coati Allow this to dry then apply a coat of Speed-Wall Flat as it come* from the can. On woodwork in place of Base Coat use Gliddeneoat (Enamel Undercoster). ~ New Unpointed Surfaces--On unpainted walls make sure thst wash cost of Zinc Sulphate solution has dried out. For first cost apply ffpeed-Wafi Interior Basp Coat. Allow to dry overnight then apply a mixture of one-half Speed-Wall Flat and one-half of Speed-Wall Interior . Base Coat.'-After this _ dried 24 hours apply a finishing coat of Speed-Wall Flat as it comes from the can. On woodwork use Gliddeneoat (Enamel Undercoater) place of Base Coat. V 5's per gal. WMife and Colors......................... ....................................... $3.55 l's each $3.65 Vi's each $1.16 ' ^Vv.. * "'t./, ^ y,; s^`sv ...i GLD025403 zest;*-' . sfliSfe, I r r r SPEED-WALL SEMI-GLOSS Type of Product--A type of wall finish embodying quick drying properties without sacrificing any of the easy working and flowing qualities essential to a perfect job. It dries with a beautiful serai-gloss and is as satisfactory for woodwork and furniture as for wall decora tion. Its hard, closely knit film permits easy and repeated washing, while its soft pleasing gloss imparts no strong light reflections or glare. Drying Time--18 hours--24 or more for recoating. Corerage-- 600-550 square feet per gallon --one coat. Application -- Same as Speed-Wall Flat. 5's per gal. V6 each Vi's each White and Colors................................................................. $4.75 y $4.85 $1.45 / 4 / i</s SPEED-WALL GL0SS Type of Product--Highly water-proof, resists steam, moisture, and washing, jtho white resists yellowing and the colors retain their original freshness and unarm over a long period. Practical for kitchen, bathroom and similar household uses. It may be applied to plaster, cement, wood, wallbmlrd, or metal surfaces. Spreads smoothly from the brush-yho pulling--no sagging--no brush marks. Drying Time-- 1* hours, 24 for recoating. / Coverage-- 600-65b square feet. ^TT>v, --i Application -- Same as Speed-Wall Flat. WhllVpnd Colors_______ N 5's per gal. $445 i's each $4.95 Vi's each $1,46 V4'" each $ 44 r SPEED-WALL MIXING SIZE Type of Product--ASeelM for interior walls. Its function is to i ! the pores or voids in plaster, and to finishing coats. Can be used asikegaes from the package or mixed} df and half with Flat Wall Finis Drying Time--18 hours, 24 for}fecea$ing. sinking in of the Corerage--400-450 square feet per gaUoll Aprilicaiion--All surfaces must be dry and ire&Scqni all foreign matipM'Oirextremely porous types of wall surface, apply one coat of Speed-Wall Mixing Size as it comes from the containerm^sUgvijietleSs than 24 hours for thorough drying before applying succeeding coats. On less porous surfaces, one coat of a mixture of emplfrilfts ofMlxinJ'SJzeand Wall Finish in the color selected should be applied allowing at least over night for complete drying. FoUowwjtfe'Cne coat of Wall FiniahUPthecolor selected which under normal conditions will produce a satisfactory Job. If two coats are desirajdeffivemight should be allowed for dryln&between coats. Before and during applicatiop^ettrall Primer and paint ft intervals to mainttdnlNiQUorm distribution of pigment and color. 5's per gal. pSed-Wall Mixing Size........................... _/...................... $3.35 . '8seaeh $34$*^. Vi's each $1.11 ' c G G SPEED ERIOR BASE-COAT On First Coster Type of Product--A prepared oil and pigmented prifner and sealer for all porous wall surfaces with exceptional penetration and filling properties. Stops suction in composition board and prater wails and neutralizes to a degree the free alkali in the plaster. Being heavily pigmented it baa sufficient opacity so that one coat of finishing material only is required. Drying Time--18-24 hours, 24 or more lor recoatifig. -* Corerage--400-450 square feet per gallon--one coft. Application--Stir thoroughly before using. Where there is a possibility of hot lime in the plaster we recommend first washing the surface with a solution of two pounds of commerdal/Zine Sulphate to a gallon of water to neutralize the lime. Allow the surface to dry thoroughly. Make sure all moisture has evaporated. Then apply a coat of Speedwall Interior Base Coat reduced with one pint of turpentine to the gallon of Base Coat. Allow this coat to dry oYemight and retouch any spots that indicate unusual porosity by fiat spots. Oil First Coater. 5*8 per gal. $4.15 l'a each $4.25 Vi's each $1.32 SPRED PRODUCTS--Flat, Luster, Primer-Sealer, and Satin listed on page 27. GL0025404 HI-FASHION COLORS Type of Product--Glidden Hi-Fashion Colon are made from the finest chemical]/ pure pigment* and haVefarttMae durability. There are 10 basic colors and Black, which can be used straight orinterm'' able. Colon are lim* proof I in shade* to match all modern fabricsl Thweire'clgan, clear colors which will reproduce interion both traditional and modern.., ^ Drying Time--Overnight, 24 hours to recoat. Coverage-- 460 square feecjjewggllon. Application*-- On new work ortrivarea scaler is required, use Interior Basecndl and tint, to permit maximum hiding Colon are ready to use and should cover suTBaigntly in one coat to do a satisfactory job. They disperse quickly and can be ea*Dvin mixed to get the desired shade. The/ can also be fW^with enamels, semkleb or special varnish to give added sheen. Hi-Fashion rw Cards and Color decks show all shades obtainable and i act directjqprTor mixing. If thinning is required, reduce with Special TUnn as recommended. Hi-Fasbion Colon dry overnight to a riclhsMgugrsshneAllil^nfiusnh tthhaatt iias *ennHtnir>e1lyv vwaagshhoabKlLe, For Woodwork--Add Special Mixing Varnish as recommends obtain a semi-gloss finish. White 1 Raw Umber Burnt Umber (................. Burnt Sienna j .. Orange and Yellojp<!\... ____ Turquoise. ........... ................... Bed endearoon.............. ................... Blue^Cfl......... .................. ................... W<ck ................................. ................... each $4.40 8.42 7.45 6.05 4.90 3.78 $1.35 2.36 2.09 1.78 1.48 1.19 Vi's each ^SJ .77 L2^s^ 1.14 .97 .84 .69 " Vii'8 each $ .33 .46 .30 GLAZING LIQUID Tupe of Product--A clear liquid that dries with an eggshell finish. This material is recommended for use over walls previously Qnthyi preferably with a senu-gloss paint, for producing stippled, mottled or tiffany effects. Ideal as well for the antiquing and poiychromin* ofjfurniture and interior woodwork. ** Drying Time--Overnight. Coverage-- 600 to 700 square feet per gallon. Application--A dear liquid that dries with an eggshell finish. This material is recommended for use over Speed-Wall Hat or SemiGloss for producing stippled, mottled or tiffany effects. This effect is obtained by first building up the surface with the necessary coats of Speed-Wall Flat or Semi-does. After these coats have dried. Glazing Liquid should be applied to as much of the surface as can be worked conveniently at one time. Immediately following this application, and before Glazing liquid has dried, reduce one or more shad** of Color in Oil to a creamy consistency by the addition of Glazing Liquid, and spot the wall surface. Then, using a doth, blend one spot into the other. Heavier applications of color at the base of the wall will give a darker effect than at the top. After this blending is iw>mpiiaM, crumple a cloth, using it to stipple the entire wall surface to further blend the colon and produce the desired mottled effect. fi's per gal. Glazing Liquid. _.......................................... ........................ $4.30 l's each $4.40 l/*'u each $1.35 SEALETTE Type of Product--Sealette seals, primes and finishes in one operation. It can be applied over dry surfaces of casein, calcimine and texture paints. Also plaster wall board, wood previously painted, brick or cement surfaces or any other dean, dry and solid interior paintable surface. Drying Time--18 hours. Coverage--360 square feet, approximately. Application--All surfaces must be dean and free from dust, dirt and grease. Loose and scaling surface* should be wire brushed or scraped. Reduce Sealette Flat by adding two or three pints of Mineral Spirits or Turpentine to the gallon, depending on porosity of surfscs and method of application. Do not use Linseed Oil Varnishes, or patented oils for reducing Sealette Flat for Finishing coats. S's per gal. Sealette................ ................................................................... $3.45 l's each $3.55 Vi* each $1.13 BARN AND ROOF PAINTS ENDURANCE BARN PAINT Type of Product--Offer# the best protection for outside surfaces to be found at such low coat. A dependable paint for exterior use, with easy working qualities and good hiding power..Spreads easily and smoothly, drying slowly to a tough, glossy surface. Greatly improves the appearance of barns, fences, warehouses, factories and other structures of this type. Excellent for metal roofs and brick surfaces. Appli cation of this paint increases the value of the property and protects the investment-all at an unusually low price range. Unpainted or poorly protected surfaces are an unnecessary liability when a reliable Barn Paint can be applied for such a small outlay. Prevents deteriora tion and high replacement or maintenance charges. Drying Time--24 to 36 hours. Corerage--400-450 square feet per gallon, one coat. Application--Stir well before using. Apply with a large bristle brush working it into the seams and cracks. Old Pointed Surfaces should be scraped or wire brushed to remove loose particles. Two coats are recommended, but if the surface is in good condition one coat may be sufficient. The paint may be thinned witH raw linseed oil to make it work properly over porous surface. New Wood Surfaces--For first coat on new wood, add one-half gallon linseed oil to one gallon of paint. Second coat may be applied full body as it comes from the can. New Metal Surfaces--'Roots, eaves and down spouts should be carefully scraped to remove all rust and scales after which two coats of barn paint should be applied. For Brick or Concrete-The first coat of barn paint should ba reduced with cement mixing liquid and any spots that show unusual absorption should be given a second application. Allow surface to dry at least 3 days before the second coat is applied full body. / 5's per gal. Bed........... ......................... .............................................. $2.90 Gray......... .............................................................................. 3.75 l's each $3.00 3.85 Vi' e*ch $.99 1.20 / Tl NITERS* FAINTS i Type of Product-FoT use primarily on metal roofs./flashings, gutters, downspouts and for work inride in shops but equally satis factory for surfaces of wood and brick, etc. Permanent in/color and waterproof, they dry to be handled in a few hours and hard overnight. They are sufficiently elastic not to chip or crack even od bending the metal on which applied. Furnished only in a low gloss so that they will not intensify irregularities in the metal. I Drying Time--Overnight. 36 hours for recoating. / Coverage--450-500 square feet per gallon--one coat. Application-- Stir paint well before using. ApplWwith a metal bound brush. Before application on any surface be sure that all rust scale, grease, dirt, etc. are removed and that the surface is clean. One coat is all that is required. Material is ready for use but for greater workability material may be reduced slightly with pure boiled linseed oil. Tinners' Red. Green. 5's per gal. $3.35 5.80 I's each $3.45 5.90 Ws each $1.08 METAL PROTECTIVE PAINTS NEV-A-RUST Type of Product--An exceptional produi for efficient protection of metal surfaces against weather and temperature changes. It is water-resistant and also resists acid and alkali fumee. It contains rust inhibitive pigments and requires no primer, although it is very often used in conjunction with liquid Red Lead lified. DryingTime--18-24 hours, 48 or more ft recoating, Coterage--650-600 square feet per gallon- one coat. Applicalion--Stir well before using. Surfi es to be finished should be scraped or wire brushed free from all rust, scale and loose print, Also be sure to remove all dust, dirt, grease id oil by washing if necessary. Be sure surface is dry before painting. Two coats are recommended, allowing twenty-four hours drying 1 - between coats. If thinning is deemed necessary add a small amount of boiled linseed oil. 5*s per gal. Gray, Greenbrier..............I.................. ................................................................ $5.75 Brown, Red, Black______............................................................................ ........ 5.65 l's each $5.85 5.75 11 GLD025406 ZINC DUST PAINT Type of Product--This is made to meet the demand that exists today in industry and every farming community* For application to all sheet metal, particularly the galvanized and zinc coated sheets to which it h adhesion better thaw be obtained through the use of other primers recommended for the same purpose. It serves as both the primer and Owiihfag material. Conforms to specifications of the National Zinc Institute. Drying Tim*-- Approximately 24 hours. 48 or moTe for recoating. Coverage--Tint coat coverage is approximately 480 square feet and the second coat from 600-625 square feet to the gallon. Application--The surface to be painted must be clean, dry and free from all foreign deposits. If practical, it is wwimmimAiil that galvanized metal surfaces be permitted to weather for sixty days at least to dissipate the greases that are results of the galvanizing processes. This product staves as both a prime and finishing coat and should be applied, in both cases, in the body that is found in the package. At least 48 hours should be allowed between coats for thorough drying. f's per gal. Zinc Dost Paint..................................................................................................... $10.30 l's etcl $10.40 GRAPHITE LIQUiD PAINT Type of Product-An near a 100%pSrgrapWta4iaint as it is possible to manufacture. Contains oi pigments as are necessary to keep the product in periectcSBditionin the container. Ex< chimneys, or any general exterior surfaces. Should withstand BOtr'FRhsqfiheit amounts of such other :, it is satisfactory for boilers. Drying Time--18 hours. 48 hours to recoat. Coverage--BOO square feet per gallon. Application-- Surfaces to be repaintedthrvatO-ffe'dry and cleaned free from dirt, greaseT'Shd-other foreign matter while any spots showing corrosion should b thorougM^sSfiapapered down to where the bright metal is again apparent. (Tllrect^o coats are recommended, depending upon the typeoUfirfSbiand durability desired. The preduct u eoually as satisfactory applied oveFTedJqad, chromatised, or other primers. AUow^HrrSast 24 hours between coats for thorough drying. r 5's per gal. Graphite Liquid Paint......................................J,................... _.......................... $4.99 l's each $5.00 CHROMATIZED METAL PRIMER Type of Product--A scientific combination of rust ii bltive pigments in a water-resisting vehicle. Better than Red Lead for either nterior or exterior surfaces but not effective on galvanizi metal surface*. For both new work and touching up of bare spots when repainting. Drying Time--IS hours. 36 or more for recoating. Coverage--660-600 square feet per gallon--one coal Application--The surface to be primed must be dfy, free from dirt, dust and grease and foreign matter. Apply full body for brushing and reduce with tuipentine or mineral spirits for spraying. Allow to dry hard before re-coating, which, under normal drying conditions or temperatures of 70, will require approximately 18/hours. 5's per gal. l's each Red............................................. ..J...................................................................... $6.80 $6.99 GLIDTITE /GALVANIZED IRON PRIMER Type of Product--A superior first cost for 1 galvanized metal, plymetal, galvaneal, or treated metal surfaces thsVpoaseesea better adhesion for these surfaces than any other prir Metal requires no previous etching with acid. Eliminates the peeling experienced > with ordinary materials. Dries hard for re-coaf ig overnight. Adhesion is better as application is in thin rather than heavy coats. j Drying Time--Overnight--24 hours or mi for recoating. iI Coverage--660-600 square feet per gallon.. Application--It is recommended the surface be first washed with an all purpose thinner or turpentine and then rinsed ^horoughjywitir clean water. Allow the surface to weather as long as is practical. Apply one coat of Glldtite Galvanized Iron Primer full body as received. Apply paint selected for finishing not more than 72 hours after the Ghdtite Galvanized Iron Primer has been applied. White. 5's per gal. $4.50 l's each $4.60 ATER TANK FINISHES Type of PirocRRt---Costing materials 1 >r the protection of the inside surfaces of steel 1 _____storage of water. In a test including a large number of competitive . ____ every description these were given a rat'----- *- Satisfied users in all parts of the country, and their adoption as a standard by the/ ___ ` builders of steel it proves superiority. Drying Time--8 hours. 24-48 for : tating. Coverage--460-500 square feet per j lion--one coat. Application-- Brush or spray. l's each No. 1525 Chromate i $6.65 $6.75 No. 1777 Gra hetic Enamel. 7.85 12 GLD025407 LIQUID RED LEAD --Modified Tvv* Product--A well msde, protective, rust inhibit!ve paint lor me as a first coater on structural steel, iron and all metal surfaces. prying Time--18-24 hours. 48 or more for recoating. Coverage--460-500 square feet per gallon--one coat. vinplieoiio*--See that the surface to be mated Js hand brushed or sand blasted free from all rust scale and other foreign matter and perfectly dry. First apply a coat of Glidden liquid Red Lead (modified) reduced 10% with naphtha or turpentine. After the first coat is tborougnly dry, and if succeeding coats are needed, apply as it comes from the container. 5's per gal. l's etch Liquid Red Lead --(Modified).................................................................... ...... $7.15 $7.25 r r SMOKE STACK BLACK Type of Product-A high gloss black for smoke stacks and all other surface* tiat require a heat-resisting finish. Not only will It with- stand high degrees of heat but it is unusually weather-resistant as well. This Waterfalls made on a varnish and carbon black base and should not be confused with the many asphalt products offered. Should withstand heat to 800* F. Drying Time--Overnight--86-48 hours for recoating. , Coverage--400-500 square feet per gallon--one coat. / Applieditem--Stir paint thoroughly with lifting motion. Surface mustlie dry and free from dirt, grease, rust and other foreign matters. Apply one or two coats Smoke Stack Black as received in the container, ^flowing sufficient time to dry between coats. Smoke Stack Black. 5*e per gal. l'e each 7- $3.55 $3.75 - &=- ENAMELS AND (JNDERCOATERS RIP O LI N -- A R^C HITECTURAL BLT. iaai boeen tchue stisanadarad wmhiechn makers of enamel have tried iIn vain to equal, ' by the moest diiscri`minating users of enamel throughout the world. Klpo> and durability. Drying Time--Gloss--24 hours--72 or more tor Semi-Gloss--24 hours--72 or more fo recoating. Corwop*-- Gloes--700-760 square feet per gallon. Semi-Gloss--600-650 square feet per g; on. l's each %'s each %'s each Gloss, Semi.Gloss, White_______ ________ ___________ $9.75 $2.70 4il - / RIPOLIN-QUICK DRYING -^ Type of Product-- A superior enamel made to meet the demands for a quicker drying material. Retains most of the outstanding qualities of BLT Ripolin but dries in from 6 to 8 hours. Levels out freely without brush marks to a brilliant, hard, tile-like lasting gloes surface. Drying Time-- 6-8 hours--24 for recoating. / Coverage--550-600 square feet per gallon--one coat. Application--Stir well before using. j Old Painted Surface*--'Ripo'iia Undercoat is required only on enamel jobs calling tor a distinct color change from dark to lighter shade*. Apply one or two coats as may be required to produce necessary opaqueness. Allow twelve hours drying time. Sand last coat lightly before applying enamel. f New Unpainted Surface*--Apply two coats of Ripolin Undercoat to new wood that is properly sanded and perfectly dry. The first coat should be reduced about 10% with turpentine, allowed to dry overnight, then followed with a second coat applied full body. Second coat should dry about 12 hours, then apply enamel in color selected. Sand lightly between coats. Gloss and Serai-Closs ^Whhile l's each $8.65 %'s each $2.40 %'s each $1.35 l/i*'s each $ .75 / RIPOLI ii UNDERCOAT-QUICK DRYING Ty..pe o.f Pr--o--d--u--c-t----T--h--i-s-p--r-o--d--u--c--t-d--r-ifji sufficiently hard to be recoated in 18 hours. It has more sealing properties than any other Enamel Undercoat, stays where it is put, fiows/free from au brush marks and requires minimum sanding. Because of its unusual opacity no more than two coats are necessary for even the best enamel job. Drying Time--18 hours--24 for ^coating. Coverage--550-600 square feet. Application--Apply with brushJ Ripolin Undereo%f................................................................. I's esch $5.80 %' each $1.68 %'a each $ .93 IS GLD025408 I SUPERIOR SPEDENE ENAMEL GLOSS Tvve of Product-& high gloe* enamel that retains its original whiteness Bnd gloss throughout its entire life. Intended primarily for woodwork It cannot be surpassed as an enamel for wall work in the home, public building and hotel where a durable and washable finish is desired. This product is quick drying and is not blued so that in the bands of the painter true ivories and creams can be developed through the use of colors in oil for tinting. This material will not sag and its exceptional flowing qualities eliminate all possibilities of brush marks. Drying Time-6-8 hours. 24 for recosting. Coverage--560-600 square feet per gallon --one coat. Application--Stir well before using. Old Painted Surfaces-- The surface should be dry, clean and free from grease, dirt and other foreign matter. Apply one or two coats as needed. On dark woodwork apply one or two coats of Gliddencoat (enamel undercoat) following with one or two coats of enamel. Sand lightly between coats and allow at least overnight drying time between coats. New Unpainted Surfaces--All new work should be built up with Gliddencoat (enamel undercoat) as directed. The finishing coat should be Superior Spedene Enamel applied full body. On walls use Interior Base Coat as primer in place of Gliddencoat. Superior Spedene Type of Product/A companion product to Superior S; gloss free from flashings and bf/h lights. It works easily Drying Tim/-VI hours.6-48 for recoating. Coverage-j60-600 squash feet per gallon--one cp6t. ApplicrJum--Stir well Before using. Old p/inied Surfaces--The surface should iyi'dry, clean and free from as neededfOn dark woodwork apply one or twprcoats of Gliddencoat (enami lightly between coats. few Unpointed Surflees--AH new wyfk should be built up with Gli should be Velvet Spedene(Enamel applieprfull body. On walls use Interior GLIDDENCOAT Type of Product--Because of its quick drying properties, it is a truly economical Undercoat for the Master Painter to use, and the householder as well. It dries to recoat in 24 hours, possesses unusual opacity, work* easily under the brush, flows out free from all brush marks and requires but a very light sanding. Because of its unusual sealing properties there is no absorption of succeeding coats of enamel and they stand out with a maximum of luster and depth of gloss, It can be water sanded to a beautiful eggshell. Drying Time--12-18 hours--24 for recoating. Coverage--500-600 square feet per gallon. Appliedtoit--Stir well before using. Otd Painted Surfaces--Gliddencoat is required only on enamel jobs calling for a distinct color change from dark to lighter shades. Apply one or two coats as may be required to produce necessary opaqueness. Allow twelve hours drying time. Sand last coat Bghtty before applying enamel. Ntw Unpainted Surfaces--Apply two coats to new wood that is properly sanded and perfectly dry. The first cost should be reduced about 10% with turpentine, allowed to dry overnight, followed with a second coat applied full body. Second coat should1 <dry about 12 boors. then apply enamel in color selected. Sand lightly between coats. Gliddencoat. l's each 85.00 Vi's etch *1.52 Vi's each I .85 VARNISHES / GMDDENSPAR Type of Product--This product is one of the latest developments in the manufacture of varnish, > product that has more resistance to extreme exposure, water and acid conditions than any other varnish made. It possesses more filling properties than other products and is recommended for all exterior surfaces, and on those places inside the home subject to water and exposure, such as window silts. Drying Time--Overnight--48 hours for recoating. Coverage--600-700 square feet per gallon -- one coat. Application--He sure surface Is clean and dry. Ail open grained wood, such as oak, ash, etc., not previously finished should be filled with Paste Wood Filler, wiping the excess filler off the surface across the grain. Allow to dry twenty-four hours then apply first coat of Gliddenspar reduced ten per cent with turpentine. After sanding lightly apply a second coat as it comes from the can. Close grained woods require no fillers; after staining when necessary, sand lightly, apply one, two or three coats of Gliddenspar. Shellac should never be used in a finishing schedule calling for Gliddenspar. / Old Work--Remove old finish with sandpaper and apply two coats of Gliddenspar. Thin the first coat with turpentine, allow to dry twenty-four hours and apply a second coat as it comes from the can. / l's each l ' Gliddenspar........................................... $7.35 / '/Vs each $2.08 Vi's each $1.17 Vjt's each $ .67 / / BAR AND TABiE TOP VARNISH Type of Product--A straight synthetic base product extremely satisfactory for all surfaces about the bouse, dub or hotel. It is not affected by boiling water, alcohol, or hot dishes. Applied on chairs, it will not become tacky from body heat. It is suitable for a floor varnish, and its pale color makes it ideal for linoleum. It also nibs and polishes as well as the best furniture varnishes. Drying rime--8 hours--16 for recoating. f Coverage-- 60(1-600 square feet per gallon. / Application--Do not use shellac any place in the finishing schedule. Old Work--Be sure surfaces are dean and free from foreign substances and perfectly dry. One or two coats are all that are required. On a two-coat job, reduce the first coat approximately ten pep cent with turpentine and apply second coat full body as it comes from toe can. Mew Work--After staining and filling, open grain woqfis with Paste Wood Filler or staining dose grain woods, apply a first eoat of varnish reduced ten per cent with turpentine. The second/coat should be reduced with turpentine and the third or final coat applied full body. Allow twenty-four hours drying time between courts. I l's each Vi's each Vi's each 'At 8 each Bar and Table Top Varnish............... I $7.35 $2.08 $1.17 $.67 / JAPSPAR Type of Product--An extremely durable vamisW for exterior use. Absolutely waterproof. It has extreme elasticity, excellent body and flowing properties. Sets dust free in from 2-3 hours and dries in from 8-10 hours, according to conditions. Can be nibbed to a dull finish m about 3 or 4 days. For use on ships, yachts, outside doors, window sills, casings, vestibules and all work whether wood or metal that is exposed to the elements. I Drying Time -- S hours--24 for recoating. Coverage -- 600-700 square feet per gallon-- one float. Application--Be sure surface is dean and dry. Open grained wood, such as oak, ash, etc., not previously finished should be filled with Paste Wood Filler, wiping the excess off the surface across the grain. Allow filler to dry twenty-four hours, then apply a first coat of Japepar reduced ten per cent with turpentine. After drying, sand lightly and apply a second coat full body. Close grained woods require no fillers. After smining when necessary and sanding, apply one or two coats of Japepar. Shellac should not be used as a first coater. I Old Work--The old finish should be sanded toJa smooth surface. Be sure tbe surface has been cleaned of the resulting dust and is dry. Apply one or two coats of Japepar. Reduce first coat with turpentine, allow overnight drying, and then apply a second coat full body. / l's each Japspar......................................J.......... $6.00 Vi's each $1.75 Va'aeach$1.00 We's each $ .60 I FLOORETTE Type of Product--Pot finishing natural, j ainted or grained floors. It combines bard and quick-drying properties without sacrificing the elasticity so essentia] to a floor varnish. It waterproof and withstands the hardest usage to which floors are subjected. Does not mar or scratch white. Sets dust free in 2 or 3 horn a and hard in from 8 to 12 hours, according to conditions. Can be rubbed and polished or left in the gloss. > Drying Time--S hours--24 for recoating. Coverage--600-700 square feet per gallon- one coat. 15 CLD025 410 WfflB Application--Old Work--Be sure surface u cfepi and free from dirt, grease, wax and other foreign matter, and perfectly dry. Apply one or two coats as needed. On a two-coat job reduce the first coat ten per cent with turpentine and apply second coat full body. Allow twelve bourn to dry between coats. New Work--The surface should be dry, dean and sanded smooth. Open i wood should be filled with Paste Wood Filler. After staining and filling and allowing the filler to dry, apply one coat of Floorette i uced to ten per emit with turpentine. Apply second coat full body as it comes from the can. If third coat u needed apply full body. CAt O"N"--Floorette when used on floors should not be applied over shellac, shellac substitutes or liquid wood fillers. Floorette. I's each *6.00 Vi'* each *1.75 Vi's each *1.00 Ms'* each $ .00 U K VA - R u B Type of Product--Intended for interior trim and dries with* rubbed or velvet finish. We recommend a finishing coat of this varnish, with preceding coats of Wearette. f Drying Time--% hours--24 for recosting. ^ Coeerage--600-700 square feet per gallon--one coat. / Application--Keep thoroughly stirred while using. / Old Work--If the surface is at ail worn apply one cent of Wearette Varnish and follow with a coat of Lik-A-Rub. If the old finish is in good condition one coat of Lik-A-Rub should be sufficient. Sets dust free in two hours. New Work--We recommend Lik-A-Rub to be ua^d as a finishing coat only. The surface should be built np with Wearette Varnish thinned with a small amount of turpentine. For the (pal eoat apply Lik-A-Rub full body as it comes from the ean. l's each Lik-A-Rub..................................... /... *6.00 Vi's each *1.75 Vi's each *1.00 Vis's each * .60 R APIDCOTE Type of Product-- This product i juick drying qualities without sacrificing the elasticity, durability or wear-resisting qualities of thhe varnmisshl . Can be used on floors, woodwrk or furniture or on interiors, and. being unusually waterproof, 4 excellent for exterior use as weil. The extreme paleness of this Tarnish makes it ideal for use on surfaces which are to retain the original color. Drying Time--4-6 hours. 16 for recoating. Coeerage--600-700 square feet per galttn--one coat. Application--Old Work--Remove all flirt and grease and sandpaper sufficiently to remove the gloee of the old varnish. If the surface is badly marred or checked, take off the ibid varnish with varnish remover or sandpaper. Where two or more coats are tuied, reduce the first eoat of varnish 10% with turpenl . Allow to dry overnight for complete drying of each coat. New Work--Open grained woods i lould first be filled with Paste Wood Filler following directions on the label and when dry apply Rapidcote Varnish. If two or more coatjl are used reduce the first coat about 10% with turpentine. Do not use over shellac, liquid wo . fillers, wax or lacquer on floors. Rapidcote. l's sack *6.00 Vi's each *1.75 %'s each *1.00 Vi*' each * .60 SPEEDOLEUM yp* of Product--For use onflinoleum or oil doth. It Is pale In color, elastic, quick drying and vary durable. It successfully with stands the hard usage to which linoleum or varnish is subjected. One coat of this varnish over an old worn surface of linoleum will restore the brightness of the original fh and prolong the life of the linoleum. Dries to walk on overnight. Drying Time-- Overnight 1 hours for recoating. Coverage--600-700 square f< ; per gallon. Application--One coat a] : at six-month intervals over surfaces previously finished and after they have been washed and dried, will preserve the color and imp ; a life to the linoleum heretofore unrealized. It wax or oil polishes have been used wash thoroughly with turpentine or mineral spirits. Due to the dressings oleum lay for two or three New linoleum, after ha two coats of Speedoleum, gi oleum over Shellac, Liquid tie applied to all new linoleums to keep them soft and pliable while in stock, it is advisable to let the lia' a, washing it at intervals to remove the oil dressing*, which if present, will retard tbs drying. _ been freed from these oil substances, all other foreign matter, and allowed to dry perfectly, should receive g the first coat from six to eight hours to dry perfectly before applying the second coat. Do not apply Speedood Filler or SheDae Substitutes. Speedden l's each *5.60 Vi's each *1.67 Vi's each * .90 Vis'# each $m 16 GLD025411 Type of Product-A heavy bodied varnish just as the painter likes it. One coat is equivalent to two of an ordinary varnish, for there is no shrinkage on drying. Dries with a deep high gloss. Takes a high reduction. For floor* and all interior turfam. Drying Time--Overnight, 24 hours for recoating. Carnage-- 600-700 square feet per gallon. Application--Old Wort-Surface should be clean and dry and sanded to a smooth surface. One coat is usually sufficient. Where two coats are needed reduce first coat 10% with turpentine. New Work--Open grained woods should be stained and when dry given a wash coaVof shellac. Then fill surface with Paste Wood Filler as directed on package. When dry sand smooth. Follow with two coats of Rockspapredudng first cost 10% with turpentine. t r Black Aaphaltnm I ff's per gal. .... *1.55 l's each *1.65 Vi's each f .* Vi's each * .43 Vis's each * .*1 17 GLD025412 GLID-SEAL Type of Produel-- A reinforcing liquid made from the same oils and gums that are the bases of the finest waterproof Tarnishes manu factured. Its usee are unlimited. As it is furnished it serves excellently as a finishing varnish on all interior and exterior surfaces including linoleum. It is an excellent primer and sealer for plaster, concrete and brick and when added to wall paints produces a pigmented primer reducing the number of finishing coats necessary. It can be used as the vehicle in aluminum paints. When added to house paints, floor paints, or wall paints it imparts added durability, working properties, washability and enhances the gloss as well as the Initial set of the paint. Drying Tim*--4 to 6 hours --hard overnight. Coverage--600 square feet per gallon. Application-- Alumtmm and Bronte Points--Use 1M to 2 pounds of powder or aluminum paste to % gallon of Glid-Seal and H gallon of turpentine. Wall Finithes-- Two parts of Glid-Seal and one part of Flat Wall Finish will produce an effective well-sealing primer. An intermediate coat should be mixed in the proportion of K to of Flat. The finishing coat reinforced with one pint of Glid-Seal to the gallon will improve the flow and washing qualities and produce a soft restful sheen. Primsr--Apply full body except on extremely porous surfaces of brick and cement when Glid-Seal should be reduced 25% with turpentine. The addition of Euston White Lead in Oil to primer for plaster is recommended. Floor Paints-- Glid-Seal is a thinner for Euston White Lead plus Colors in Oil will produce hard drying, wear resisting and waterproof floor paints for interior and exterior floors, decks and roofs. l's each %'s each Glid-Seal............................................. -..................... ........... .............................. $5.2* $1.57 PENETREX Type of Product--A penetrating type of finish for floors. It affords unusual protection against staining and discoloration as well as imparting wearing qualities. This product penetrates deeply and seals the pores of tne wood. It is beat applied by brushing on to the surface for more than 16 minutes. A wood surface should be carefully sanded and made smooth before applying the varnish and a light mowing with steel wool is advisable between coats. Recommended for schools and public buildings where it will seal the surface and make it easy to clean. Also protecting it from scuffing, scratching, and stains. Drying Time-- Overnight. 24 hours tor recoating. Courage-600-600 square feet per gallon. Application--Shake well before applying and stir occasionally during use. Floor surfaces should be free from all foreign matter and sanded carefully to a smooth surface, after which all dust should be carefully removed. Apply Penetrex as It comes from the can by either mopping or brushing it on to the surface. The best drying conditions are in temperatures of 70* F. After 20 minutes any excess material that has not been absorbed by the wood should be wiped from the surface with dean rags and in another hour the entire floor surface should be huffed with a pad of No. 2 steel wool to remove any grain of the wood that is raised, any excess puterial, and to produce a uniform appearance. Where two coats are to be applied allow 12 hours for complete hardening ofthe first coat. Anyexcess material remaining on the surface 10 minutes after the second coat is applied should be removed and the entire surface buffed with steel wool a* recommended in the first coat application. Open grain woods require no filler as the second coat will sufficiently fill the open grain. Old floors previously finished must be cleaned free from all punt, varnish or other finishing materials previously used with either sanding equipment or paint and yarnish remover. Where paint and varnish remover is used wash the surface thoroughly with naphtha to remove wax deposits. Caution-- All wiping rags and steel wool should be burned immediately after use. 5's per gal. Penetrex................................................................................. $4.75 . l's each $4.85 %'s each $1.45 No. 65 VELVET FLOOR VARNISH Type of Product--A semi-gloss floor Varnish for producing a velvety finish on floors where a reduced luster is desired. It reduces the glare shown by the glossy type of Floor Varnish. It has good wear resistance and is resistant to water and repeated cleaning and scrubbing. Drying Time-- Sets dust free in 2 hours and dries hard overnight. Coverage--606-700 square feet per gallon--one coat Directions--Stir well before and while using. Neis Work--No. 66 Velvet Floor Varnish is recommended as a finishing coat only. The surface should be built up with Floorette Varnish thinned with s small amount of turpentine. For the final coat apply No. 66 Velvet Floor Varnish a* it comes In the can. Old Work--If the surface is at all worn apply one coat of Floorette Varnish and follow with a coat of No. 65 Velvet Floor Varnish. If the old surface is in good condition one cost of No. 66 Velvet Floor Varnish should be ample. l's each $5.75 %'s each $1.70 %'s each $ .92 %*' each $ .56 18 GLD025413 GLIDDEN PURE SHE yt A C p-gjud--A quality product consisting of pure gum shellac cut with d< tured alcohol. Supplied in White or Orange. TVP4raUon --Shake well before using. When too thick thin with denatured aj6ohol. Keep tightly corked when not in useT ** ll(iej u a surfacer or sealer on new wood Shellac should be thinned With alcohol to the extent of from 15 to 25% depending on the porous condition of the surface. When used for sealing knots Shellac should be generously applied in full dy without thinning over knots, and all sappy parts of the wood surface, to thoroughly seal and prevent sap, gum or pitch from seepin: brough succeeding coats of other finishing materials. Caution--Keep away from open flames or overheated surfaces GLIDDEN PURE SHELLAC-Prices upon application. STAINS - FILLERS REMOVERS AD-EL-ITE NON-INFLAMMABLE PAINT S VARNISH REMOVER Type of Product--Advantages over ordinary removers fo/ removing baked enamel, paint, varnish, shellac, etc.: (1) It is non-inflam mable. (2) It has a heavy body and therefore has less tendencmo run ana sag on upright surface*. (8) Water may be used to dean remover from metal surfaces, mineral spirits or turpentine for other ty*e surfaces. (4) Stays wet longer which permits working on larger areas. Application - Apply remover with paint brush. Usual]/ from 5 to,20 minutes is sufficient to soften the flnfah, depending upon the hardness and nature of the old finish. Remove softened fissh with a broad knife and follow above for final cleaning. Before renniahing be sure surface is thoroughly clean and dry. / Note-Paint and Varnish Removers irritate the ski/ of some people. Protect the skin by applying Vaseline. CAUTION: Contains Volatile Chlorinated Solvent. U3e with adequate ventilation. Avoid prolonged or repeated breathing of vapor. Avoid prolonged or repeated contact with skin. Do not take internally. ' l's each $4.15 Vi's each $1.29 Vi's each $ .7$ AD-EL-ITE RAINT & VARNISH REMOVER Type of Product--The highest grade, most satisfactory remover manufactured. Contains no alkalies, adds, oils or water. Does not raise the grain or discolor wood. Very slow in evaporating, consequently very effective on old paint, varnish, enamel, lacquer or baked japan. Ad-EI-Ite Paint & Varnish Remover. S's per gal. $1.85 l's each $1.95 Vi's each $ .70 Vi's each $ .46 Vis'* each $ .85 ASTE WOOD FILLER Type of Product--For use on all opedgrained woods such as oak, chestnut, walnut and mahogany. It has a pure sites base and will not shrink or break away from the pores rjl the wood when dry. Furnished in paste form, it must be reduced with naphtha or turpentine. Drying Time--Overnight. Application-- Reduce with turpenti/e or benzine to a creamy brushing consistency. After it has dried 15 or 20 minutes a flattening will be noticed at which time the excesrf filler remaining on the surface should be wiped off with burlap or wadded exoelsior. The wiping should be across the grain of the wood, rather than with the grain in order to force the filler into the open pores. Paste Wood Filler--/Natural. 1's each $3.89 Vi's each $1.25 Vis's each $ .47 LIQUID WOOD FILLER Type ott^ttyUct--For use on/all close-grained wood. Seals and fills at the sanwtijpMWSfCflSEFtEe^absorption of succeeding coats of varnish. It hasRtMsudyantaaes over shellac--does not discolor the naturgLjtswdpwnda more easily and has a greater affinity for suc ceeding coats of varnishTTHocay recommended for floors, but is Mi |}1 fsi FTTiillii i interior surfaces. Drying Tint--OvernighteZddhlloutlT94o*jCORting. Coverage--400-500 square feet per gallon; Application--Apply with br 5's per gal. Squid Wood Filler............................... $3.4* Vi's each ^$1.1* Ms's each $ A2 GL0025414 Mmff /6-n> V, iF TAII IS Type on , Tim*-*r& hou ting 1 i of ou stain for new wood. quires no' ting, dries 1 i of ail laps. Ivor I one cost. *--TJhoroug dean] and sang to a smool i finish. Stir] intents an<j apply with aeof/bnuh, let spend 24 hoi woo/ipplyi very th/n control shellac the stai/ and when < . tandpar and fill 1th Paste FUler. , applynhelltc hAvJie-r aftetr si tainlni /(no pi aste finer required i dose i i woods), sand ;htly, color utty to /work1 i Wo/d Stai/s- Cowrs.. Drfk Mah/fany. i each /93.19 3.93 fs each $1.07 X.26 r Ms* iehjl 9 .411 .47 { OIL WOOD STAINS Taps . light wiping. tef-Thia line of stains is especially recommended for ezterior/ue because of the ] 9ncy of color. Requires only a Drying Time-Ovi Coeerage--800 square feet peTEallan--one coat. Application--Stir thoroughly beforetBhiti4tesure surface is dries too quickly add a little linseed oil. Apply n I IFII Hill In mill alio' with soft rag until a uniform color prevans. thinning is required use turpentine or bensine. If it i remain on the surface about 6 minutes, then wipe off excws For a Wax Finish--When perfectly dry apply a tUs^edSTof Ad-ei-ite Prepared Wax. gd lightly when dry. then rub with a doth containing For a Varnish Finish--First stain the wpens above. If open wood, fill with Paste* Der before staining. Apply two or three coats of Glidden Wearette Varnis^Indull finish is desired apply one coat of Wearettp and finish at of Lik-A-RuDramiah. Oil Woei8fain-- Regular Colors....................J.............. Mahogany `.'ill.............J............. l's each 93.34 3.97 %' each 91.11 1.19 JAPALAC PRODUCTS JAPALAC QUIC DRYING ENAMEL (GLOSS) Tvp* oj Product--Recommended for use where a gh gloss finish is desired. Gives excellent wearing results on furniture, woodwork. furnace, pipes, grills and general household surfi Drying Time--4-6 hour*--24 for recoating. Coverage--<00-600 square feet per gallon--one c/at. Application--Old Paintid Surface*--Remove i loose paint, rust and other irregularities. Clean surface with soap and water. Wipe dry and allow suffident time for moisture to thorouj ly evaporate. One coat of Japalac will be found suffident where conditions are normal, though two coats produce a beautiful gloss and de ith of finish. New Unpointed Surface*--AH surfaces should be dry and dean and should be sandpapered to a smooth surface. Apply two or more coats of Japalac Enamel reducing the first coat i ^ut 10% with turpentine. Sand lightly between coats. Japalac Quick Drying Enamel_______ / |6.98 A'a each Vi's each 91.98 Vi's each 91.14 lAt* each 9 .87 lia'seaeh 9 .43 JA A LAC VARNISH STAIN Type of Product-- Stains and varnishes j i one operation. For use on all interior surfaces, furniture, woodwork, and floors particularly, It is unusually waterproof, will not mar or i latch while on floor aurfacee. Old pieces of furniture can he quickly transformed to the popular and modern Mahogany and Walnut. Va S Stains dry in 4-8 hours with s rich deep gloss, Drying Time--4-Q hours. 24 hours for J sting. Carnage-- 900 square feet per gallon--Jbne coat Application--Shake the can well before removing cover, stir the contents thoroughly before applying. Old Painted Surface*--Carefully remeve all blemishes and discolorations with sandpaper or steel wool, dean the suface with mild, soap and water, then allow suffident time for thorough drying. One coat will produce a satisfactory finish under any but unusual conditions If two coats are considered desirable allow overnight for first coat to dry ana sandpaper it lightly, then apply second coat. Nne Unpointed Surface*--Two coals are recommended, sanding lightly between coats. The first coat serves as a primer and sealer. If a third coat is considered advisable, apply full body after tbe preceding coat has dried overnight. Japalac Varnish StainI -Natural and All Color*........... .. Ground Color.............................. I'e each $9.24 4.98 Vi's each 91.89 149 Vi'**** 9 49 47 Ms's esck 9 J9 49 GL0025A15 1 >/ S'r'/J/z/J' OLID-TONE - 'TfT^eird-Tone is a new improved type of pigmented wiping stain for all v interior wooden surfaces. It brings out the beauty of the grain of the wood as well as giving it a beautiful color tone, Olid-Tone also seals the wood and partially fills the grain, thus holding out the succeeding coats in a better manner than any other type of wood stain, Olid-Tone gives a beautiful color to both hard and soft woods and by adjusting the quantity of Olid-Tone Reducer added, the colors of soft woods can be matched to those of hard woods. Ask1 year Dealer for -copy nr n. nf-various frinds of wood,. ;> Su r f a c e p r e p a r a t io n * sanding dust. XBB3Seti!k Be sure surface is sanded smooth and free from APPLICATION; Stir contents of can thoroughly and reduce equal parts wIWTIlii^Tbne Reducer* Brush a good wet coat on the surfaces and allow to dry 5 to 6 minutes on the average before wiping off excess stain with a lint-free cloth across the grain of the wood to par tially fill the pores, until a uniform color prevails. Allow to dry overnight before applying finish coats such as Olid-Tons Sealer, Olid- Tone Sheen or Oloss, or Shellac, Varaich or Lacquer. If it is desired to use a wood filler on such open grained woods as Oak, Walnut, and Mahogany that have been coated with Olid-Tone and allowed to dry over night, apply a coat of Olid-Tone Sealer and allow to dry at least an hour before applying filler, CAUTIONt Keep Olid-Tone and Olid-Tone Reducer away from heat and open flame. Destroy promptly all rags used in wiping off stain after use to avoid danger of fire. 6L00P5416 National Headquarters THE GLIDDEN COMPANY 11001 Madison Are., Cleveland 2, Ohio Cleveland 2, Ohio, 11001 Madison Ave. Chicago 16, 111., 1833 S. Normal St. Chicago 39, 111., 1866 No. LeClaire Ave. New Orleans 8, La., 424 Josephine St. Minneapolis 13, Minn., 1901 E. Hennepin Ave. FACTORIES Reading/Pa., Third and Bern Sts. St. Louis 2, Mo., Main and Gratiot Sts. San.Francisco 7, Calif., 1800 7th St. Toronto 9, Ont., Canada, 861 Wallace Ave. J / k*KhtUAi CiTyf 1CAW. Atlanta, Ga. t`UiN^HbN%2!ltiTOMd' Birmingham, Ala. BRANCHES AND DISTRIBUTING POINTS Detroit, Mich. Minneapolis, Minn. Duluth, Minn. Mobile, AI^ El Paso, Texaa Mt. Vernon, 111.' Beeteei Maes. Evansville, Ind. New Orleans, La.' .j Buffalo, N. Y. CAkW,>fc."fCh,,bt..N.C. Chattanooga, Tenn. Honolulu, T. H. Houston, Texas Huntington Pq^k, Calif. Norfolk, Va. North Bergen, N. J.Oklahoma City, Okla. Chicago. HI. Indianapolis, Omaha, Neb. Cleveland, Ohio Columbus. Ohio Jacksonville/ Fla. ^Knoxville, Orlando, Fla. Philadelphia, Pa. Dallas, Texas LoulsvDl ^MWwl,r,MlMiarai, Reading, Pa. Richmond, Va. Sioux Falls, S. D. St. Louis, Mo. St. Petersburg, Fla. San Antonio, Ta*_Sa n San FrancisCo, Calif. Scranton, Pa. Soux Falls, S.D. Tampa, Fla. Toledo, Ohio Washington, D. C. (West Palm Beach, Fla. Montreal. Quebec, Canada?} Win k i >6 hA^iToQAy '* PA INIS VARNISHES LACQUERS NAME IS GLD025417 -TlM^SiD- JAPALAC GRAINING COMPOUND Tiip* of Product- A water soluble material applied on top of Ground Color and grained with a graining tool to resemble natural wood. ' Any unsatisfactory design can easily be washed off or removvied by applying anothffcoat of the color. When dry one or two coats of varnish stam, in any color selected, will give the true wood effect. Drying Time--1 to 2 hours. Apppplliiccaatiion--Apply one or two coats of Japalac Ground Color to ccoovwi all stains and marks. Stir Graining Compolund tthioroughly and keep pigment well mixed while graining. Apply lightly with dean brush, graining while wet with the graining tool. After the Graining Compound has thoroughly dried, apply two coats of Japalac Varnish Stain, natural or colors, allowing sufficient time between coats for drying. V JAPALAC BRON2ES-READY MIXED Type of Product-- Impart lasting, non-tarnishing finishes Oat will not rub off. Excellent for use on picture frames, andirons, brio-abrac, in fact any surface of wood, metal or fiber where a finistyof gold or silver is desired. Drying Time-- Overnight. Application--Stir well before and while using. Apply wifh soft hair brush. . Vi's each J Aluminum.............................. $1.84 / Wo each $ .98 Ms's each $ .62 Mi'* each $ .39 Ms'* each $ .29 JAPALAC QUICK-DRYING DEAD BLACK ENAMEL Type of Product--A. solid covering enamel, quick-drying that produces a dead flat finish. Can be mixed with Brilliant Black to produce the semi-gloss blacks that are so popular on electric Appliances, stoves and many other items. Drying Tinu-- 8 hours. Coverage-- 600 square feet per gallon. Application--Old Pointed Surfaces--Clem the/surface with mild soap and water. Allow sufficient time for molsure to thoroughly evaporate. Remove looee paint and sand rough spots to a smooth surface with fine sandpaper. One coat of Dead Black will produce a plearing result though a second coat can be applied If desirable after the first coat has dried overnight. New Unpointed Surfacet--The new surface slfould be properly prepared with one or more coats to properly seal and prime it. Finish with one coat of Dead Black after preceding costs have dried completely. l's each Japalac Dead Black............. / $6.98 Vi's each ' Vi'* each $1.98 $1.14 i/j s 's each $ .67 Vis'* each $ .4$ JAPALAC SCREEN ENAMEL JType of Product--Made for the preservation of the wooden frames as well as the screen mesh of doors, window screens, etc. Drying Time--6-8 hours. Coverage--600-600 square feet per gallons Application--The surface should be dry and free from dust and scale. One coat will usually prove satisfactory for repaint joba while two coats should be applied to uspainted surfaces. Allow overnight for drying between coats. No thinning is necessary. Use a < 'Screen Applicator for beet results. l'e each Vi's each W* each Ms'* each Japalac Screen Enamel Black. $2.63 $ .89 $ -54 $ .36 JAPALAC STOVE AND IRON ENAMEL Type of Product-- A black enamel for ]metal surfaces subjected to heat. Drying Time-- 6-8 hours. Coverage -- 600-600 square feet per gallo1i Application--All surfaces to be finished should be dry and free from grease, dust and other foreign matter. Turpentine Is excellent for remomvinng the greasy deposits resulting fr >m cooking BUT SHOULD NOT BE USED NEAR FLAME. Under ordinary conditions one coat of enamel will prove ample but where two coats are considered advisable allow overnight for drying of first coat. Vi's each Vi's each Ms's each M*' each Japalae Stove and Iron Ei ismel $1.03 $ .63 $ .39 $ .24 21 GL0025418 JAPALAC GRAINING COMPOUND ^ Type of Product - A water soluble material applied on top of Ground Color and pained with a paining tool to resemble natural wood. Any unsatisfactory design can easily be washed off or removed by applying anotWr coat of the color. When dry one or two coats of Tarnish stain, in any color selected, will give the true wood effect. y Drying Tim*--1 to 2 hours. and Compouoi drying. JAPALAC BRONZES-READY MIXED Type of Product-Impart lasting, non-tarnishing finishes that will not rub off. Excellent for use on picture frames, andirons, brio-ebrae, in fact any surface of wood, metal or fiber where a finislyof gold or silver is desired. Drying Tim*-- Overnight. Application--Stir well before and while using. Apply w^h soft hair brush. Aluminum. Vi's each *1.84 Vi's each $ .98 xhs'* each $ .<2 Vii's each $ .89 \4i' each % .29 JAPALAC QUICK-DRYING DEAD BLACK ENAMEL Tvp* of Product--A. solid covering enamel, quick-drying that produces a dead flat finish. Can be mixed with Brilliant Blade to produce the semi-gloss blacks that are so popular on electric Appliances, stoves and many other items. Drying Time--B hours. Coveragt--600 square feet per gallon. Application--Old Painted Surface*--Clean tWsurface with mild soap and water. Allow sufficient time for molsuie to thoroughly evaporate. Remove loose paint and sand rough spots to a smooth surface with fine sandpaper. One coat of Dead Black will produce a pleasing result though a second coat can be applied if desirable after the first coat has dried overnight. Alea Unpointed Surfacee--The new eurface should be properly prepared with one or more coats to properly seal and prime it. finish with one coat of Dead Black after preceding coats have dried completely. Japalae Dead Black. 1's eacb / *6.98 Vi's each *1.98 Vi's each *1.14 Vis's each * .67 Vis's each * .4* JAPALAC SCREEN ENAMEL Type of Produtt--Made for the preservation of the woodeh frames as well as the Bcreen mesh of doors, window screens, etc. Drying Time--6-8 hours. J Coverage--600-600 square feet per gallon.) _Application--The_ su_rf_a_ce should be__d_r_y tiandd free from dust and scale. One coat will usually prove satisfactory for re_paintjobs while two coats s'hou'ld' `be applied to unpaint`ed suri aces. Allow overn.i.g..h...t..f.o..r...d..r..y..i.n..g....b..e..tween coa.ts..No .th..inn.ing .is necessary. "Use a "Screen Applicator for best results. Japalae Screen Enamel Blick . l's each *2.63 Vi's each 9 .89 Vi's each * -54 Ms's each * .36 JAPALAC STOVE AND IRON ENAMEL Type of Product-- A black enamel for all metal surfaces subjected to beat. Drying Time--6-8 hours. J Coverage--600-600 square feet per gallop. Apptication--All surfaces to be finished) should be dry tad free from mease, dust and other foreign matter. Turpentine is excellent for remomvinng the greasy deposits resulting frpm cooking BUT SHOULD NOT BE USED NEAR FLAME. Under ordinary conditions one coat of enamel will prove ample but where two coats are considered advisable allow overnight for drying of first coat. Vi's each Vi's each Vis'* eacb Vis'* each *1.03 * .63 * .39 * .24 AUTO FINISHES SPEEDENAMEL Type of Product--A quick drying, durable synthetic enamel designed primarily for automobiles but made in a wide range of colors which adapt it for use as well on wood and metal outdoor furniture and bicycles. Drying Time--6-8 hours. Courage--600-600 square feet per gallon. Application--First see that the surface to be refinished is entirely free from grease, oil, dirt, wax or polish and that it is dry. If the old finish b badly marred or checked, rub to a smooth surface with fine sandpaper or steel wool. Clean all over with a rag wet with gasoline and allow to dry for about one-half hour. Dust off thoroughly before applying the first coat. Speedenamel is ready to apply as it comes from the can. Use a good quality brush, flowing on the enamel and cross brushing it on one panel at a time, such as a door, hood or side of the body. This will eliminate the danger of sags or brush marks. Black, Autumn Brown Sage Green, Fayette Green, Dover Gray, Desert Sand, Royal Blue, Windsor Blue................................ Fire Red, Monroe Maroon, Jersey Cream____________ _________ ____ Gray Primer........................................ Auto Body Solder............................. .. Vi's each $1.96 2.09 2.26 1.49 Vi's each $1.13 1.18 1.23 .84 Vis's each $ .67 .69 .74 .54 'A*'* ech __ $ .49 TOUCH-UP BLACK Type of Product--Dries quickly, will not chip or flake off the surfaces. Carries a high gloss, will not settle in can. Application--This materia] is ready to apply as it comes from the can. Use a good quality soft brush, flowing on the enamel and cross brushing it on one panel at a time, such as a door, hood or side of the body. This will eliminate the danger of saga or brush marks. each Half-pint cans only..................................... ............................................... $.49 TRUCK, TRACTOR AND MACHINERY ENAMEL . Tt/pe of Product-- Colon are those used by some of the leading manufacturers of farm equipment. They are fade proof, weather resist ing, have excellent hiding properties and are resistant to oil. Drying Time--6-3 hours. 24 for recoating. Coterage--600-600 square feet per gallon--one coat. Application--Stir paint well before using. Apply with a good enamel brush. Surface must be clean, dry and free from grease or rust. Remove grease with gasoline and use sandpaper to remove all rust spots from metal. Spread enamel evenly. The enamel is ready to use as it comes from the can--it should not be thinned. Black.............................................................................................................. . l's each Vi'8 each $5.75 $1.55 I. H. C. Red, Hi-Way Yellow, A. C. Orange, J. D. Green, J. D. Yellow, Cletrnc Ormnge......... ...................................................... 7.202.10 I. H. C. Bine and New Fordson Gray_______________________ 5.901.75 N.SjV S'*.*- METALLITE Chrome Aluminum / For Interior Surfaces / extremely smooth, chrome-like, uadnua finish for use on radiators, furnace jackets, airdui , hot water tanks and heaters. pipes- and other interior surface? Not reoowosnded for surfaoes subjected to tenperatures beteeah 1*00 F. and 600 F. For these temperatures use GLIDERN HRAT-PSISTINO METAILITB. Will not tarnish tinder ordinary oondil Itlfc pell before using an/occasionally durlt* use. Surface to be eoated map be dry and free from grease and dirt* 4pply in one direction only ng a soft brush. Keep bru*fc,welTfmtd Mih the! /CPBCaffi AKTMINOM insure a constant flow,, Income* iso neat/, thin with rpentine or mineral spirit! -:-; ,`$V' ''Ik ^ >'' . ` -S\ ; _miI2S produoee a emootftyontTwWike, poliabed aluminum finish* It will retain ite brllltanoo otvf a long period of tin*, furnishes ideal protection to structural afoel. metal roofe* low-teaperature smoke ataeka, far* equipment, add outer aurfaooa of storage tanka* Betarda evaporation loss in storage tanka and rednooa teaperaturea in buildinga because the aluponum refleota the heat waves of the aim* occasionally during uat* asrfaot mat , free from ell loose and other foreign : ter* Apply with e aoi tfc* brash well ill with HETAUIW, Tb apply in ooe dire on to aeoure e smooth* bright'aiWfcia* - EC; thinning is to neoeeaaiy# use email amount of turpentine or. mineral spirits;/ HEAT-J ISTINO METALUTE Re* Mixed - Aluminum .Ab its name implies, thig product is intended for wtal surfaces subjected to heat. Atjtow surface temperatures the product is baked onto the surface*while at high surface temperatures the Aluminum is fused toAhe surface. Mot recommended for use at bases of smoke stacks where heat is intense. >-- Getir well before using and occasionally during use. The surface t be dry, free from all loose particles, dirt, grease and other for ign matter. Apply with a soft-bristle brush, ketoiag the brush we filled with 1CTALUTB. Do not brush bade and ftriS* apply in 01 direction. If thinning is found necessary, use smidl amount of entine or mineral spirits. -- Coverage* /600 to 800 sq. ft. to the gallon, depending on the surface. '<y. V vr- , e ALUMINUM PAINT TERIOR METALLITE-CHROME FINISH ' Type of Product inuiyfcTy nteriorJisorTlfr powder do^am discolor milt iiif f 1 Hill ....Vi I iiiim Isi IIIHBI\ mill the lioutd enables tha^&lamT ___ perfelUyi BTiould witVjJjjid-iOoto KOO ili'ii mis FfTTT I'liln II An eStrtlBeiySne finisS umipqm-Wr si rticles as radios, beaters, etc. Drying Time~ S-12 hours. 24-36 lor recosting. . Cottrage--6QJM00 square feet per gallon--one coat. Appticatio*t^nhe^Riyace to be coated musthesdry, freef soft-bnjtk bpiu*^V^m#lifrhrusJp<indl filleg/imh t^eMfMflite. Do frniaMSHr and' oreign matter^, fihoneT yith a Mnallit&fecomes too thlSfc, thirr-trtth turpentine or naphtha. Stir before using and occasonally during use. interior Metallite--Chrome Finish l's each $5.09 Vi's each $1.53 Vi's each $ .87 Vis's each $ .53 EXTERIOR METALLITE ,, Typo of Product-k ready mixed aluminum for uscon farm implements, smokestacks, structural steel, metal roof and field tanks. Should withstand 600 to 600 degrees Fahrenheit. . /) ' Drying Tims--Overnight. 48 hours for recoating, s Coverage--60000 square feet per gallon--one coal ALUMINUM ASPHALT ROOF PAINT Typ* of Product--Ho. 145 Aluminum Asphalt Roof Coating: is mad* -with sdscted asphalts, the finest grad* of aluminum fiakst and solvents. It is recommended for tar paper, composition, or asphalt roofs. It will rejuvenate weathered roofs and insulate with a silvery sheet of aluminum, all in one coat. It sharply reduces roof and inside building temperature in hot weather. It decrease* heat losses in cold weather. Coeeraje--Cover* approximately 225 to 300 square feet to the gallon, depending on roughness and porosity of the surface. Application--May be applied by brush or spray, and comm ready to use. Before application, broom or hose off all loose material and imbedded dirt. When the surface is dry, coat badly worn spot* with Asphalt Hoof Coating No. 1420 and repair leaks. Allow two weeks Summer weathering of Asphalt Roof Coating before applying the Aluminum Asphalt. Coal tar coatings should be allowed to harden before applying Aluminum Asphalt. Follow with No. 145 Aluminum Asphalt on the surface with only enough brushing to secure a uniform film. It should be kept away from sparks or flames until the solvent has evaporated. This material may be used on metal roofs previously primed with metallic primers. Nete: As a word of caution, we suggest that operators work with their backs to the sun to avoid sunburn, and wear dark glasses to avoid eye damage. 5's each l's each *3.60 *3.76 MISCELLANEOUS AND SPECIALTIES AD-EL-ITE PASTE WAX TvP* of Produet--For furniture, floors and automobiles, in fact, any surface where e waxed finish is desired. It polishes quicker and easier than other similar products and will retain its gloss and finish over a period of several months. It dries hard and imparts longer protection to floor surfaces even when subjected to extreme hard usage. 1 lb. can *1.09 SLICK LINOLEUM COATING Type of Product--A. dear lacquer Unoleum coating. Drying Tim*--Sets in 16 minutes. Dries firmly in 4 hours. Cootrag*--250-300 square feet per gallon. Application--Apply with brush. SUck linoleum Coating.................................................. .. SUck Reducer............................................ ................. .. l's each *5.85 ....... Vi'* each *1.72 ....... each * .95 .69 ROMARK No. 1 Tvjlhjjf Product-- Retards bleeding on an asphalt or tar base surface. Dries in from 4 to 15 minutes to a film theft will not blitter, flake, cracloar wash off. Makes it excellent as a sealer and primer for succeeding coats of paint on that type surfusfbtripes show a dean cut edge and iV^an be applied either with a brush or machine. Drying TfnuVito 15minutes. Coverage--250-3b6*(quare feet per gallon. Application--Applywithbrush or spray unit. Can be thinned with alcohol. . 5*8' per gal. Romark No. 1 ......................... ......................... :................ *3.95 Bomark No. 1 Yellow-!^?^_________________________ ______ ^<<^7.... *.80 l's each *4.05 4.96 ROi No. S __Typ* of Product A traffic paint of as great durabfli_t^'a.s No. 1 but no Will last from 8 to 6 months under heavy tnffic _ om 5 to 8 months under mo Drying Tint--46 to 60 minutes. Co**rag*--On* gallon wUl paint a atrijp^lnchas adds and 800 feat long. Application--TJio naphtha only tptiUn Romark No. 2. for use ?n any surface of which asphalt is the base. ` forty-pound atomisation pi it In us*. It works bsst with a at the gun, and ten-pound pressur* at the tank, through standard sprayjhgequlpment. For brushing, appl; Only for thinninj___ marie No. 2 just as it comes from the container. If it becomes heavy in body, due tobqaporatioa, use Naphtha! 5's per gal. Remark No. 2 White................ ........................................................ ............. . *4.29 Romark No. 2 Yellow........................ ............................... ................. ........... .. 4.00 24 GLD02542* A WOOD BLEACH Type of Product--Has the amazing properties of bleaching practically any type of wood from its original color to an almost natural bite and without any deposit of a salt of any land in the pores of the wood, necessary to the production of the blond effects ao popular and modem at present Application-- 1. Sand wood thoroughly and dust before applying Wood Bleach. 2. Apply a wet coat of Wood Bleach with a small mop, dean soft rag, cotton waste. 3. Dry Brat application 3 hours and repeat for whiter bleaching. 4. The strength of Wood Bleach may be controlled by adding Distilled Water to the final mixture. 6. Allow Wood Bleach to dry thoroughly (not lees than 12 hour*) sand lightly and follow with desired finish. Remove all old finish from surface of wood with paint and varnish remover, making as many applications as are necessary to remove all traces of the old finish. Then wash with a water solution of trisodium phosphate or sal soda. Rinse thoroughly with dear water. Allow to dry overnight before applying Wood Bleach. CAUTION! In mixing Wood Bleach USE ONLY GLASS, ENAMEL WARE OR HARD RUBBER CONTAINERS. Add one part of No. 2 to four parte of No. 1. Stir with glass or wood rod. USE NO METAL FOR MIXING OR STIRRING. DO NOT mix more Wood Bleach than can be used in three hours. DO NOT--Pour unused mixture into either No. 1 or No. 2 Solution. DO NOT-- Keep mixed solution In dosed container. DO NOT--Store Wood Bleach in warm places or direct sunlight. USE RUBBER GLOVES in mixing and applying Wood Bleach. If Wood Bleach gets on hands wash thoroughly with cold water and vinegar and apply Hand Lotion. NOTICE: Sometimes thsre is a precipitation in Solution No. 2. This material quickly goes bade into eolutlon when warmed. Submerge bottle in warm water or by standing it on a radiator. The cork of the bottle should be loosened to prevent gas formation. Wood Bleach. Large Unit tMt Small Unit 4.00 SURFACENE Type of Product--A clear liquid which can be applied to an old surface to deaden the gloss and create a bond for a new finish coat. Surfacene acts as a cleaner and will dissolve wax, grease, or polish which can be removed from old surfaces by simply wiping them off with a dean doth. Application--This material can be brushed or applied with a doth. For old surfaces that are fairly dean, Surfacene may be added to the paint to furnish a bond and anchor the new finish to the old without crawling. A quarter pint to a gallon of any paint is recom mended. l's each Vi's each Vi's each 2.76 $ .93 9 NEVA-ROT. Type of Product--A new war-proven preservative for application on all wood, fabrics and ropes. It has many uses in the homM farm, and anywhere insects, molds or fungus are active. Neva-Rot is toxic to organism* that destroy cellulose; it prevents the ai& termites. Formulated in green end dsarsolutiona. ' - 43m Coverapc--Ono gallon of Neva-Rot will treat 200 square feet of an average surface. Very rough wood may require one gallos! r square feet of surface. . ` -- ' ApplteoHoa--Appnsd y brushing, spraying, dipping or swabbing, Neva-Rot Green is particularly desirable for feaee'p ; wood that is to come into tontaet with sou. Neva-Rot Clear la recommended for all surfaces where the Green colot^s net Neva-Rot Clear __1. S'a per gal. *3.40 i*i each WJ Witi* Neva-Bet Green.... 23i z 'Da'. -j. . ;'.W 3> ICr V 4 PURE COLORS IN OIL , ri'W* of Product - Unexcelled for tinting, white lend ground in oil, enamels, prepared paints and wall finishes to anv dminvi shads fGroun<d extremely fine in special pale grinding linseed oil, the best selected pigments are used to develop perfect tone and strengthofcolor The use of these Colors in Oil with paste or serai-paste paints will produce a beautiful finish at far less than the usual cost. Thev are unsu_r_p_a_stnse.dtMinnfsftfrkenKgvththb*yhAthftei: Pbeftmetnc^ottfmcivppetmitivlnerscoinlorosili.n oil. AOB* *re l's each Vc's each VW each Zinc Oiide, While......... .................................. $8.90 $2.47 $ .76 Haw Umber, Burnt Umber................. 6.08 1.79 47 Burnt Sienna, Baw Sienna........ .............. 7.40 2.10 .66 Van Dyke Brown...................... .................... 6.14 1.78 49 Ivory Drop Black............... ............................ 2.04 .66 Lamp Black................................... ............. Prussian Blue.............................. .................. Ultramarine Blue.............................................. 5.00 1.65 _ _ ,, _ 2.(6 .... __ 44 .79 .77 Chrome Green (Light, Medium and Dark). 10.40 2.84 46 Chrome Yellow (Light, Medium and Dark) 449 1.24 Yellow Ochre..... .................... ......................... 5.50 147 44 Venetian Bed................................ .................... 5.50 147 44 Tuscan Bed......................... ............. Rose Lake.................................................... . American Vermilion............................. Cobalt Blue......................... .... 341 _ ,, ,,. .... ___ 347 __ 2.47 .93 .96 .76 OIL COLORS IN TUBES Master Painters'--Size 1x6 inch. Household Size-- x 3 inch........ Each * JO .17 ASPHALT PRODUCTS MASTICRETE Type of Product--A permanent and efficient material for | concrete, wood, metal, tile, terrazzo, asphalt, composition, the surface, other than cleaning free from dirt, grease, oil i . _ _ ________________________ overnight. It is mixed with common cement mortars and when so used results in a'tough, resilient'surface, having all the general'char acteristics and strength of concrete but unlike concrete, will not chip, crack, crumble or dust. The surface is dlpprooi, slridproof, noiseless, waterproof, sparkproof and will not sustain combustion. It improves with use and will resist the severe abuse of heavily loaded steel wheel trucking equipment. Supplied ready for use without heating or special equipment, it can be applied by any handy man. Contains no oils or solvents and therefore can be used in confined areas without endangering applicators or contaminating water or food. Drying Time--24 to 36 hours before use. Application--If grease, oil or paint is present use a good caustic cleaner to remove it. See that the surface is tree from dirt and dust. Flush with clear water as the surface should be damp when Primer is applied. Any excess water should be removed. Brush on two coats of Masticrete Primer, allowing sufficient time for thorough drying. For surfaces to stand trucking and heavy traffic we recommend one part Portland Cement, two parts clean sharp sand, three parts one-quarter inch stone or gravel and two parts of Masticrete. For foot traffic use one part Portland Cement, four parts dean sharp sand, two parts Masticrete. Water should be added to either mass in a quantity suffident to produce a consistency resembling mortar. All materials are to be measured by volume, not weight. Place the Masticrete in the hole and level off. After an initial set, smooth with a wood finishing float when the mixture is intended for heavy loads and with a steel trowel for foot traffic mixtures. Masticrete............ S's per gal. $1.55 l's each <1.66 MASTICRETE PRIMER Type of Product--This is the priming or bonding coat for succeeding coats of Masticrete. . Application--If grease, oil or print is present on the surface to be patched use a good caustic cleaner to remove it. See that the surface is nee from dirt and dust. Flush with dean water as the surface should be damp when the Masticrete Primer is applied. Any excess inter that stands on the surface should be removed. . , Masticrete Primer should be reduced 50% with dean water and stirred well until all lumps have become broken up and dissolved i before!t is applied. The Primer should be applied in two coats and the first coat allowed to dry thoroughly before application of the second |0oat- The second should also be allowed to dry thoroughly before any of the Masticrete Patching Compound b applied. The space to bo patched should be primed for a distance extending at least 2 inches beyond the edge of the patch. Masticrete Primer. 5'a per gat. $145 l's pergri. . $146  XT SPRED SPRED FLAT Type of Product --& washable, oil emulsion water-mix paint. Easily applied over any surface. Leaves a rich flat tone. An idea finish over wallpaper, new or old plaster, wallboard, painted surfaces, cement and tile walls. Drying Time--30 minutes to permit the use of the room when properly ventilated. 4 hours for recoating over wallpaper and at least 12 hours for recoating over plaster. Coverage -- 500 to 650 square feet depending upon surface. Application--Apply with a large brush. Apply generously and evenly; level off lightly with the tip of the brush. Keep brush well filled at all times. Do not work excessively or work out too thin. Old Painted or Papered Surface-- Remove all loose scale, grease, dirt, glue size, calcimine, and other water soluble compounds. Filling holes and cracks with spachtling compound. Paste all loose wallpaper securely. Be sure wallpaper colors are not water soluble, or bleeding will result. Test by rubbing with doth wet with Boapy water. Color should not show oh doth. New Unpainted Surfacee--Need two coats for best results. /' l's each Vi's each White and Tints............................................. ...................................................... *3.49 *1.19 SPRED LUSTER Type of Product A washable, durable, enamel-like finish, making iVexcellent for kitchen and bathroom walla. An excellent primer for plaster walls. Drying Time -- Dries to touch in one hour. Allow at least eight urs before recoating if a second coat is necessary. When used on wood, surface should be sanded between coats. Coverage--Same as for Spred Flat. Application -- Same as for Spred Hat, Vs each Vi's each White and Tints *4.98 *1.43 SPRED SATIN Type of Product--Spred Satin imparts to interior wall/and woodwork a modern, glareless finish. Remarkable ease of application, excellent coverage, and durability make Spred Sptin outstanding. Washes perfectly with mild soap and water after 80 days. Drying Time--Dries to touch in SO minutes, and a second coat may be applied after a drying period of 12 hours under proper ventila tion and good drying conditions. Remove paint spattersPromptly with a damp cloth. Coverage -- 600-600 square feet depending upon thfe surface. Application--Apply generously ana evenly with a large flexible brush. Level off lightly with the tip of the brush. Keep brush well filled, at all times. Do not brush excessively or brush out t&o thinly. Old Painted or Prepared Surfaces--Remove all lrose scale, dirt, grease, glue size, calcimine, and water soluble compounds. Patch holes and cracks with spatchling compound. Use metal primers over bare metal. Dull any glossy surface with steel wool or washing powder solu tion before painting. Do not use over wallpapers winch will stain a white cloth wet with soap and water or which contain metallic colon (silver or gold). New Unpainted Surfaces -- Need two coats f/r best results. White and tints. l'a each *4.49 Vi's each *1.89 tJecbr^/ (a)*;* RED TEXTURE BASE " Type of Product-- A neutral blending Prices on request. : to be mixed in equal parts with Spred Flat paste to obtain a textured effect on walls. PRIMER-SEALER PRED (VAPOR BARRIER) Type of Product--An excellent prufcer and sealer for porous sufaces of dry-wall construction, cured plaster and masonry surfaces. * Drying Time-- Dries to touch tnyBO minutes --12 hours for recoating. Coverage--400 square feet per gallon on plaster; 100 square feet per gallon on soft, porous wallboard. Application--Surface Preparation--Remove all loose scale, dirt, grease, glue size, calcimine and water soluble compounds. Patch holes and cracks with spachtling compound. Mixing--Spred Vapor Barrier is ready for use, no thinning required. Stir thoroughly. Avoid whipping or shaking. CAUTION: Do not add turpentine, other paint solvents or oils. Application--Brushing--Use aAarge flexible brush--keep it well filled--apply generously and evenly In a continuous film. Do not brush excessively or brush out too thin. Thoroughly clean all brushes with soap ana water before and after using. Spraying -- Apply full body,' rhoroughly clean equipment with warm, Boapy water immediately after using, l's each *4.20 Vi's each *1.20 REFLECT-O-LITE PASTE PAINT Type of Product--A superior, washable paint in paste form for all wall and ceiling surfaces for homes, stores, garages and hotsb.lt ia odorless, covers completely In one coat, possesses maximum light reflectivity without glare or eye-etrain and ia most economical sines water, not expensive thinnerui* used for reduction. The resultant film is flat, shows no laps or brush marks and will not yellow with age. Unusual adhesion permits i't to be painted over even with oil paints without danger of peeling. It can be used over damp plaster since water can evaporate througf the porous film. Sizing ia unnecessary on surfaces of uniform porosity. Drying Time-- Dries in >0 minutes. Coverage--800 to 600 are feet per gallon, depending on porosity of surface, Application--Apply wi brush. It should be reduced with 1 part of water to 2 of the paste. I's each White ai^d Tints................................. .................. .................................... ......... *3.00 %' each *1.03 k GLD025427  BRILLIANT COLORS (PASH) Bright Bed.. ... Orange................... Medium Yellow Light Yellow......... Green____ .. Blue Green........... Deep Blue__ Purple................... Black.................. Raw Sienna...... Syn. Burnt Sienna. Raw Umber......... Burnt Umber. intensity, clarity and range. 1 aeaeh Vi's each $8.10 $245 7.it 2.05 0.70 1.00 45 145 4$ 145 6.70 1.00 4AO 1.45 7410 240 3.4$ 1.10 445 143 545 14$ 445 145 4.75 1.45 Vis'* e*ch $ .72 .66 .61 41 41 41 49 49 ' 41 .47 43 .47 .49 BLACKBOARD SLATING Tvp* Of Product--A tough, abrasion resisting finish drying with a semi-gloss. Covert solidly with one coat. Drying Time--6-6 hours. Coverage--600 square feet per gallon. Application-The surface to be refinished should be free from all foreign matter and perfectly dry. One coat will give a good wearing smooth writing surface, but two coats will wear longer because of the heavier film that is developed. l's each - >/' each Blackboard Slating................... .......................................... ......................... ...... $1.00 $1.25 VISMATIC GREEN CHALKBOARD COATING Type oj Product--A new type of chalkboard coating that is colored green to allow marimum Hght reflection and ease of cleaning. Drying Time--Overnight dry between coats. Coverage--Brushing--350-400 square feet. Spraying--slightly less. Application--Brush Method--Brush evenly, using a soft, well broken-in 8-inch brush, extending strokes in all directions, using care to have brush fairly full at all times. Apply full body or reduce if necessary with H pint of mineraTspirits per gallon. One coat is usually sufficient; however 2 coats will give longer wear. Allow overnight drying between coats. Spray Method --Reduce Coating with 1 pint of V M & P Naphtha to the gallon. One coat will usually be sufficient. Preparation--Chalkboard must be cleaned to a dust-freesurface. Any wax crayon orgrease must be removed with turpentine or mineral spirits. Unsealed surfaces must be sealed with Glidden Spred Primer-Sealer or GKdden Interior Base Coat, not necessary on slate surfaces. Surfaces with a sheen should be sanded prior to applying the Coating. Conditioning Chalkboards jar Use--After coating has dried for 48 hours, apply chalk, broadside, over entire surface. Use felt eraser to work chalk into surface and remove excess with clean eraser. Cleaning Chalkboard--Avoid washing as much as possible; when necessary use a sponge-rubber eraser. The chalk treatment previously described should be repeated after washing. Dry cleaning may be done by wiping with a dry chamois or soft dry rag. Oil treated rags should not be used. l's each %'s each Vismatie Green Chalkboard Coating........... ..................................................... $7.85 $2.24 GLID-N SPECIALTIES 5% D.D.T. A residua] or an AA apace spray; provides quick-killing and long lasting control of the following household insects: Silverfish, Pleas, Bedbugs, Wasps, Gnats, Mosquitoes, Moths, Carpet Beetles, Roaches, Ants, and Flies. Stainless, greaseless, and free of objectionable odor. l's each $2.10 %'s each $ .65 T5 each .55 LIQUID CLEANER .. An excellent degreaser as well as a cleaner. It does a remarkably easy job on walls, woodwork, floors, linoleum, tile, windows, mirrors, . sad automobiles. It dries free from streaks or base and restores the original beauty of .the surface. Harmless to the skin. For general eleans- ' Inf, use at the rate of 2 or 8 teaapoonful* per gallon of water. l'a each %'s each %'s each $3.25 $ 49 $ A9 . FLOOR WAX II I c AUTO POLISH For use by the automobile and truck owner, the airplane owner; in (act, all those individuals who possess means of transportation of any description which are finished with lacquer. Glid-N polish removes old and dead films of lacquer without streaking, without any trace of greasiness; works as well upon japanned surfaces as on lacquer. l's each $2.90 Vi's each $ -85 Vi's each $ .48 Vis'* each $ JO o o BRUSH RESTORER Restores old paint brushes that have become hardened by age and improper cleaning after use in paint, enamel, varnish, laequer, shellac, asphalt roof paints, water thinned paints, etc. It leaves bristles in perfect condition for further use in all types of finishing material. Vi's each $ .65 Vi's each $ .36 METAL POLISH A quick, easy-worlting liquid polish tor use on brass and nickel trim of automobiles, trucks, all metal furnishings in and on pnbUe buildings; and the many surfaces of metal in and about the home. Meta! polish does not require hard polishing. Apply with a soft dry eloth, let it dry, and then follow with polishing with a clean soft doth. I's each $2.90 Vi's each $ .85 VV each * .45 lA* each $ .SO WALLPAPER REMOVER ^. A time and labor saver. Add 2 ounces of the Remover to a pail containing 2 gallons of water and atir vigorously. Apply to paper with a brush, sprayer or sponge. Walls with several coats of paper should receive two applications. Use double strength mixture on paper that has been costed with water thinned paint. The surface of waterproof coated wallpapers should be roughed and broken. >^:- Vi'a each $2.25 Vix'a each f JO FURNITURE POLISH A polish that is unexcelled for the finest furniture whether finished in varnish, lacquer or the synthetics of today. Cleans and polishes in one operation and leaves no oily surface to gather lint and dust. It is applied with a soft cloth which has previously been wrung out in cold water and then well saturated with Glid-N Furniture Polish. l's each $2.90 Vi'* each $ .85 Vi's each $ .45 lAta each $ .30 MILDEW-X A liquid to be added to paints or enamels to control mildew and other fungus growths so prevalent in warm and humid dimstoe. Surfaces previously affected by mildew should be cleaned carefully by washing to remove ail existing deposits. The addition of (liquid ounces of Mildew-X to one gallon of paint is recommended. Vi's each $1.05 lAt* each $ .60 xAi* each $ .40 NOTE-Except fer Pli-Namel, wherever turpentine is rec ommended as a rediter, mineral spirits msy be