Document zz57d0n2nBkaxaQKxxMm9gXqa

DownloadRandom document
Data from Fathea saltofPFOS inIP ACUTE TOXICITY TO FISH TEST SUBSTANCE Identity:PerfluorooctanesulfonatAem,monium salt;may alsobe referred to as PFOS NH4+ saltor FC-93. (I-Octanesulfonicacid, 1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafalmumoornoi-u,m salt,CAS # 29081-56-9) Remarks: Test sample was takenfrom 3M productionlot#1. The test sample isa mixtureofthe testsubstance inisopropanoland water (25% testsubstance,20% isopropanol5,5% water).No calculationwsere made to adjustforthe actualconcentrationofthetestsubstance inthe test sample. METHOD Method: Not noted. Type: Staticacute GLP: No Year completed: 1974 Species: Pimephalespromelas Supplier:Not noted. Analyticalmonitoring:pH and DO content Exposure period:96-hours Statisticamlethods: PlottedLC50 Test fishage: Not noted. Length and weight:Average length= 2 inches,Average weight Loading: Not noted. Pretreatment: Not noted 1.5 g Test conditions: Dilutionwater: carbon filterecdityofSt. Paul,MN water Dilutionwater chemistry: Not noted. Stock and test solutionpreparation: Not noted. Concentrations dosing rate:Once Stabilityof the test chemical solutions:Not noted. Exposure vessels: Not noted. Number of replicates:One. Number of concentrations: fiveplus a negative control Water chemistry during the study: Dissolved oxygen range (0- 96 hours): 5.0-5.9mg/L (controelxposure) 4.2-5.0mg/L (100 mg/L exposure) pH range (0- 96 hours) 7.0-7.1(controelxposure) 7.0-7.1(100 mg/L exposure) Test temperature range (0- 96 hours) 21 - 22"C (70-72-F) RESULTS Nominal concentrations: Bk control,10,25, 50,75, 100 mg/L Element value: 96-hour LC5o= 85 mg/L (C.I.not determined) Mortalityof controls:None Remarks: 95% confidencelimitwsere not calculatedforthismaterial. Additionallyt,estingwas conducted on the mixtureofthe testsubstance in 20% isopropanoland 55% water. The value reportedappliesto that mixtureand notthe testsubstance. No attemptwas made to determine the impact ofthe presence ofthe organicsolventorwhat portionofthe toxicitcyan be contributedtothe Perfluorooctanesulfonataem,monium salt. CONCLUSIONS The testsample containing25% Perfluorooctanesulfonataem,monium salt exhibiteda 96-hour LC50 forfathead minnow of85 mg/L Submifter: 3M Company, EnvironmentalLaboratory,P.O. Box 33331, St.Paul,Minnesota,55133 DATA QUALITY ReliabilityK:limischranking3. REFERENCES This studywas conducted by the 3M Company, Environmental Laboratory,7/29/74to 8/2/74. OTHER Last changed: 5/3/00 EWIRONMENTAL ENGINEF.RING LABORATORY -AQUATICTOXICITY V= SMT Type Test Test Orgai@iaRT-(1k@ea_ Date Started Started DilutionWater -IAI"nu) Material Tes Avg. Weight 7c@ ii size-il---,K7% e@A P s Date Ccop.-loted 5; --ILk Platted LCs' o_ - -Conc. 24 hrs 4i hrs D.O.. D.0 Sui@'vival ipH'7PPM Survival-_pH 0 -\bo '70. 72 hrs.. D.6 Survival- pH pps 96 hrs D.0' Survival pH ppa 1()C)1.L 10 v@()' 10, \00 A4. \oo @0c)q,-t tAn @C)o 7,1 xo)o .-71S. C C\0 -7.01 0 70 "1,,3 -7-'5 701 a-)1-11 \oo 7. t-,.kc(l-IC) Ak5 )Iloo 0 C) -77, k A-ieraitTs!Merature .-70 co=wnts: 7c 0 00\ 0 Calculation 100 50 . . . . . . i7l T 10 20 30 40 so'. 60 70 so 90 100 Survival MATEFFIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 1999, Minnesota Mining and Manufacturing Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: 1) the information is copied in full with no changes unless prior agreement is obtained from 3M, and 2) neither the copy nor the original is resold or otherwise distributedwith the intention of earning a profit thereon. DIVISION: 3M SPECIALTY MATERIALS TRADE NAME: FC-93 FLUORAD Brand Etching Bath Ib NLff4BER/U.P.C.: 98-0211-0192-2 00-51135-O9t87-6 ISSUED: December 17, 1999 SUPERSEDES: September 04, 1998 DOCUMENT: 10-3795-1 Additive 98-0211-0201-1 00-51135-09190-6 --1-.--IN-G-R-ED-I-E-N-T 7--------------------------C-.-A.-S-.--N-O-. --------P-E-RC-E-NT---------------------------------------------------------------------------------------------- WATER ..............................7.7.3.2-.1.8-5 AMMONIUM PERFLUOROALKYL SULFONATE ....... 29081-56-9 ISOPROPYL ALCOHOL (IPA) ................6.7-63-0 AMMONIUM PERFLUOROALKYL SULFONATE ....... 68259-07-4 AMMONIUM PERFLUOROALKYL SULFONATE ....... 68259-08-5 AMMONIUM PERFLUOROALKYL SULFONATE ....... 68259-09-6 AMMONIUM PERFLUOROALKYL SULFONATE ....... 68259-10-9 19.0 0.1 0.1 0.1 0.1 55.0 - 23.0 20.0 - 2.0 - 2.0 - 2.0 - 2.0 The components of this product are in compliance with the chemical notification requirements of TSCA. All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS. ---------------------------------------------------------------------- 2. PHYSICAL DATA ----------------------------------------------------------------------------- BOILING POINT: ...............ca... 82 C (Initial) VAPOR PRESSURE: ..............c.a.. 34 mmHg Cale. @ 20 C. .VAPOR DENSITY: ...............ca... 1.0 Air=l Calc. @ 20 0. EVAPORATION RATE: ............<..1.0 BuOAc=l SOLUBILITY IN WATER: ..........m.oderate SPECIFIC GRAVITY: ............c.a.. 1.1 Water=l PERCENT VOLATILE: ............c.a.. 75 % pH: .......................c.a...7.. ----------------------------------------------------------------------------- Abbreviations: N/D - Not Determined N/A - Not Applicable CA Approximately -MSOS: FC-93 FLUORAD Brand Etching Bath Additive December 17, 1999 PAGE 2 ------------------------------------------------------------------------------ 2. PHYSICAL DATA (continued) ----------------------------------------------------------------------------- (o.1% Aqueous) VISCOSITY: ..................N/.D.. MELTING POINT: ..............N./.A. APPEARANCE AND ODOR: Liquid, Clear amber solution, Ammonial Isopropyl Alcohol odor. -----------------------------------------------------------------------------3. FIRE AND EXPLOSION HAZARD DATA ----------------------------------------------------------------------------- FLASH POINT: ................2.7.C. Setaflash FLAMMABLE LIMITS - LEL: ...... N/D FLAMMABLE LIMITS - UEL:...* ....N/D AUTOIGNITION TEMPERATURE: ......N/D EXTINGUISHING MEDIA: Water, Carbon dioxide, Dry chemical, Foam SPECIAL FIRE FIGHTING PROCEDURES: Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatuss bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. UNUSUAL FIRE AND EXPLOSION HAZARDS: See Hazardous Decomposition section for products of combustion. ----------------------------7-----------------------------------------------4. REACTIVITY DATA ----------------------------------------------------------------------- STABILITY: Stable INCOMPATIBILITY - MATERIALS/CONDITIONS Not applicable. TO "OID: HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon Monoxide and Carbon Dioxide, Oxides of Sulfur, Hydrogen Fluoride, Ammonia, Toxic Vapors, Gases or Particulates. ----------------------------------------------------------------------------Abbreviations: N/D - Not Determined N/A - Not Applicable CA Approximately MSDS.-fC-93 FLUORAD Brand Etching Bath Additive December 17, 1999 PAGE 3 ----------------------------------------------------------------------------- 5. ENVIRONMENTAL INFORMATION ----------------------------------------------------------------------------- SPILL RESPONSE: Refer to other sections of this MSDS for information regardind physical and health hazards, respiratory protection, ventilation, and personal protective equipment. Ventilate area. Extinguish all ignition sources. Contain spill. Evacuate unprotected personnel from hazard area. Cover with absorbent material. Cover spill area with Light Water Brand or other ATC foam. (For further information on ATC foam usage, contact 3M Fire Protection Systems.) Collect using non-sparking tools. Clean up residue with water. Place in an approved metal container. Seal the container. RECOMMENDED DISPOSAL: Incinerate in a permitted hazardous waste incinerator. Combustion products will include HF. ENVIRONMENTAL DATA: Contains only nexemptu solvents by nrule 669 type regulations; COD=.41 g/g; BOD20=.29 g/g; 96-Hr. LC50, Fathead Minnow(Pimephales promelas)=85 mg/l. REGULATORY INFORMATION: Volatile Organic Compounds: 220 gms/liter. VOC Less H20 & Exempt Solvents: N/A. Since regulations vary, consult applicable regulations or authorities before disposal. In the event of an uncontrolled release of this material, the user should determine if the release qualifies as a reportable quantity. U.S. EPA Hazardous Waste Number = DOOI (Ignitable) This product is in compliance wliththe chemical registration requirements of TSCA, EINECS, AICS, CDSL3 MITI and Korea. OTHER ENVIRONMENTAL INFORMATION: This product contains one or more organic fluorochemicals that have the potential to resist degradation and persist in the environment. EPCRA HAZARD CLASS: FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes ----------------------------------------------------------------------------6. SUGGESTED FIRST AID ----------------------------------------------------------------------------- EYE CONTACT: Immediately flush eyes with large amounts of water. Get'immediate medical attention. ----------------------------------------------------------------------------Abbreviations: N/D - Not Determined N/A - Not Applicable CA Approximately ..MSDS.,FC-93 FLUORAD Brand Etching Bath Additive December 17, 1999 PAGE 4 ------------------------------------------------------------------------------ 6. SUGGESTED FIRST AID (continued) ----------------------------------------------------------------------------- SKIN CONTACT: Flush skin with large amounts of water. If.irritationpersists, get medical attention. INHALATION: If signs/symptoms occur, remove person to fresh air. If signs/symptoms continue, call a physician. IF SWALLOWED: If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. --7-.--PR-E-C-AU-T-IO-N-A-RY---I-N-F-OR-M-A-TI-O-N--------------------------------------------------------------------------------------------------------------------------------- EYE PROTECTION: Avoid eye contact with vapor, spray, or mist. Wear vented goggles. SKIN PROTECTION: Avoid skin contact. Wear appropriate gloves when handling this material. A pair of gloves made from the following material(s) are recommended: butyl rubber. Use one or more of the following personal protection items as necessary to prevent skin contact: apron, coveralls. Protective garments (other than gloves) should be made of either of the following materials: polyethylene/polyvinylidenechloride (Saranex). RECOMMENDED VENTILATION: If exhaust ventilation is not adequate, use appropriate respiratory protection. Provide ventilation adequate to control vapor concentrations below recommended exposure limits and/or control spray or mist. RESPIRATORY PROTECTION: Avoid breathing of airborne material. Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with OSHA regulations: Half-mask organic vapor respirator with dust/mist prefilter. PREVENTION OF ACCIDENTAL INGESTION: Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Wash hands after handling and before eating. RECOMMENDED STORAGE: Store away from areas where product may come into contact with food or pharmaceuticals. Store away from heat. Store out of direct sunlight. Keep container closed when not in use. Keep container in ----------------------------------------------------------------------------Abbreviations: N/D - Not Determined N/A - Not Applicable CA Approximately .MSDS: FC-93 FLUORAD Brand Etching Bath Additive December 17, 1999 PAGE 5 ----------------------------------------------------------------------------- 7. PRECAUTIONARY INFORMATION (continued) ----------------------------------------------------------------------------- well-ventilated area. FIRE AND EXPLOSION AVOIDANCE: Keep container tightly closed. Flammable liquid and vapor. Keep away from heat, sparks, open flame, and other sources of ignition. OTHER PRECAUTIONARY INFORMATION: No smoking: Smoking while using this product can result in contamination of the tobacco and/or smoke and lead to the formation of the hazardous decomposition products mentioned in the Reactivity Data section of this MSDS. HMIS HAZARD RATINGS: HEALTH:,2 FLAMMABILITY: 3 REACTIVITY: 0 PERSONAL PROTECTION: X (See precautions, section 7.) EXPOSURE LIMITS INGREDIENT VALUE UNIT TYPE AUTH SKIN* ----------------------------------------------------------------------------- WATER .............................NO.N.E . AMMONIUM PERFLUOROALKYL SULFONATE .... 0.1 ISOPROPYL ALCOHOL (IPA) ..............400 ISOPROPYL ALCOHOL (IPA) ..............500 ISOPROPYL ALCOHOL (IPA) ..............400 ISOPROPYL ALCOHOL (IPA) ..............500 AMMONIUM PERFLUOROALKYL SULFONATE..... 0.1 AMMONIUM PERFLUOROALKYL SULFONATE .... 0.1 AMMONIUM PERFLUOROALKYL SULFONATE .... 0.1 AMMONIUM PERFLUOROALKYL SULFONATE .... 0.1 NONE MG/M3 PPM PPM PPM PPM MG/M3 MG/M3 MG/M3 MG/M3 NONE NONE TWA 3M y TWA ACGIH STEL ACGIH TWA OSHA STEL OSHA TWA 3M y TWA 3M y TWA 3M Y TWA 3M y SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption. SOURCE OF EXPOSURE LIMIT DATA: - 3M: 3M Recommended Exposure Guidelines - ACGIH: American Conference of Governmental Industrial Hygienists OSHA: Occupational Safety and Health Administration NONE: None Established ----------------------------------------------------------------------------S. HEALTH HAZARD DATA ----------------------------------------------------------------------------- EYE CONTACT: Mild Eye Irritation: signs/symptoms can include redness, swelling, pain, and tearing. ----------------------------------------------------------------------------Abbreviations: N/D - Not Determined N/A - Not Applicable CA Approximately MSDS- FC-93 FLUORAD Brand Etching Bath Additive December 17, 1999 PAGE 6 ----------------------------------------------------------------------------- 8. HEALTH HAZARD DATA (continued) ----------------------------------------------------------------------------- SKIN CONTACT: Mild Skin Irritation (after prolonged or repeated contact): signs/symptoms can include redness, swelling, and itching. May be absorbed through the skin and produce effects similiar to those caused by inhalation and/or ingestion. INHALATION: Single overexposure, above recommended guidelines, may cause: Central Nervous System Depression: signs/symptoms can include headache, dizziness, drowsiness, incoordination, slowed reaction time, slurred speech, giddiness and unconsciousness. Irritation (upper respiratory): signs/symptoms can include soreness of the nose and throat, coughing and sneezing. IF SWALLOWED: Animal studies conducted on organic fluorochemicals which are present in this product indicate effects including liver disturbances, weight loss, loss of appetite, lethargy, and neurological, pancreatic, adrenal and hematologic effects. There are no known human health effects from anticipated exposure to these organic fluorochemicals when used as intended and instructed. Illness may result from a single swallowing of a moderate quantity of this material. Irritation of Gastrointestinal Tissues: signs/symptoms can include pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and blood in feces. Central Nervous System Depression: signs/symptoms can include headache, dizziness, drowsiness, muscular weakness, incoordination, slowed reaction time, fatigue, blurred vision, slurred speech, giddiness, tremors and convulsions. Ingestionmay cause: Aspiration Pneumonitis: signs/symptoms can include coughing, difficulty breathing, wheezing, coughing up blood and pneumonia, which can be fatal. OTHER HEALTH HAZARD INFORMATION: A Product Toxicity Summary Sheet is available. This product contains one or more organic fluorochemicals that have the potential to be absorbed and remain in the body.for long periods of time, either as the parent molecule or as metabolites, and may accumulate with repeated exposures. There are no known human health ----------------------------------------------------------------------------Abbreviations: N/D - Not Determined N/A - Not Applicable CA Approximately M-0@DS,FC-93 FLUORAD Brand Etching Bath Additive ,Dec.e;ber17, 1999 PAGE 7 ----------------------------------------------------------------------------- 8. HEALTH HAZARD DATA (continued) ----------------------------------------------------------------------------- effects from anticipated exposure to these organic fluorochemicals when used as intended and instructed. The presence of organic fluorochemicals in the blood of the general population and subpopulations, such as workers, has been published dating back to the 1970's. 3M's epidemiological study of its own workers indicates no adverse effects. ----------------------------------------------------------------------------SECTION CHANGE DATES ----------------------------------------------------------------------------- PRECAUTIONARY INFO. SECTION CHANGED SINCE September 04, 1998 ISSUE ----------------------------------------------------------------------------Abbreviations: N/D - Not Determined N/A Not Applicable CA - Approximately ----------------------------------------------------------------------------- The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit.for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.