Document zoR49QOajmaN0Onp0OmpBeMn0

206^02-11 Drum Brake DISASSEMBLY AND ASSEMBLY (Continued) ~~ V : ' 206^02-11 ~" mItem Part Number 1-- 2 .-- ii 3 -- ' 4. -- r;.iiV i 5. ' -- Description Wheel cylinder boots (part of 226i). Wheel cylinder pistons (part of 2261) Wheel cylinder cups (part of 2261) Wheel cylinder expander (part of 2261) Wheel cylinder bleeder screw (part of 2261) Disassembly and Assembly ^ WARNING: Use of any other than ; approved DOT 3 brake fluid will cause permanent damage to brake components and will render the brakes Inoperative. Failure to follow these instructions may result in personal injury. WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes ^th running water for 15 minutes. Get medical attention if irritation persists. If taken mternally, drink water and induce vomiting. Get *nedical attention immediately. Failure to follow these instructions may result in personal injury. ^ CAUTION: Brake fluid is harmful to . painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water. 1. Remove (he wheel cylinder boots. 2. Remove the wheel cylinder pistons. 3. Remove the wheel cylinder cups. 4. Remove the wheel cylinder expander. 5. Remove the wheel cylinder bleeder screw from the rear wheel cylinder. To install, tighten to 8 Nm (71 lbrin). 6. NOTE: Coat all the wheel cylinder parts with brake fluid. To install, reverse the removal procedure. 2006 Ranger, 9/2005