Document zo7o298O44kzpK6pJ23Jmrob6

9 i Heati.ng S_yst,ems Boilecrosn,vReacdtoiarstors, EMBASSY STEEL PRODUCTS, INC. can stanlpv Ave.. Brooklyn 8, W. Y. STEAM CAPACITY OF COPPER ELEMENTS 215F-65FEA. TYPE F, FG, W 110.0 12.4 H.8|l7.2|l9.6 011.9 14.8 17.9,20.5 23. J 1 12 0 15.0 17.8,20.7123.0 5 12.515.5 18.4 2M24.4 M2RL60 22154.^294..99 2384--40 3318-.81 3452.-23 22.0*20-3^0.6 34.8 39.0 43.3 23.l|27.6 33.0 36.4 40.0 45.3 48.3 54.3 60.2 66.lw8.0l 52.5 58.9 65.3 71.8;84.6 53.5 60.0 66.6!73.2|88.8I 56.2 63.0 69.9j76.8,90.8jl Type FG COPPER ELEMENTS are made with copper tubes, aluminum fins and cast iron headers. Fins are mechanically bonded for most efficient heat transfer. TypeW STEEL ELEMENTS are made entirely of steel. Large 1 in. steel tubes assure efficient performance. Good on all steam and water heating systems. Designed for one pipe steam systems. CABINET--The enclosure is of heavy gage steel property rein forced with outlet grille designed for maximum efficiency. Adjustable steel brackets are secured to cabinet permitting adjustment of the pitch in either direction of the element. The cabinet is given a prime coat at the factory. 342 Heating Systems Boilers, Radiators, Convectors EMBASSY STEEL PRODUCTS, INC 890 Stanley Ave., Brooklyn 8, N. Y. Element IK I.P.S.- 4H x 4K-28 FIN TUBE RATINGS WITHOUT COVERS* Rows High 1 2 3 Steam Rating Sq Ft BTU Per per Hr per Linear Ft Linear Ft 5.20 9-60 13.00 1250 2300 3100 Minimum Installed Height* 10% 16% 22% Water Rating-BTU/hr/lio. ft Average Water Temperature 220 210 200 190 180 no 1300 1190 1080 970 860 760 2410 2180 1980 1790 1590 1400 3250 2950 2670 2410 2120 1890 IK I.P.S.4K x 4K-40 6.40 1540 2 10.90 2800 3 14.20 3380 10% 1620 1460 1325 1200 1060 940 16% 2730 2470 2240 2030 1790 1590 22% 3550 3210 2910 2640 2340 2050 2 I.P.S.4K X 4K-28 5.00 1200 10% 1260 1140 1030 940 830 730 2 8.60 2600 ' 16% 2730 2470 2240 2030 1790 1590 3 11.50 2760 v 22% 2900 2620 2370 2150 1910 1680 2 I.P.S.4K x 4K-40 1 6.10 1460 2 10.50 2520 3 13.80 3310 10% 16% 22% 1530 1390 1260 1140 1050 890 2650 2390 2180 1980 1750 1550 3480 3145 2850 2590 2290 2010 IK I.P.S.3K x 3K-32 1 4.30 1060 2 7.80 1870 3 10.40 2500 9% 15% 21% 1115 1010 912 830 730 650 1960 1780 1610 1460 1290 1140 2625 2375 2150 1950 1730 1530 * All ratings are based on active finned length. The total length of the element is equal to active finned length plus 5 in. Sturdy steel fins are automatically spaced for even heat and bonded for life by mechanical expansion. Threaded or Fin Tube-Bare Element chamfered tube is available. In lengths to 12 ft in 1-ft increments ELEMENT is made of 1% in. and 2 in. welded steel tubing. Fins are made of heavy gage steel 3J4 in. square and 4% in. square. They are permanently se cured by mechanical expansion of the Fin Tvbe-Witk Expanded Metal Cover tube. Fins are spaced 28 and 40 to the linear foot for the 4J4 in. fins and 32 to the foot for the 31'i in. fins. This variety provides for simplicity of selection and Pt'n Tube-toith Flat Top Cover sufficient capacity difference to meet varying requirements. BRACKET is die formed from one piece of heavy gage steel. ACCESSORIES . . . Inside and outside corners are attractive features to com plete an Embassy fin tube installation. They snap in and lock without screws or bolts. Splice strips, dampers and end plates are available. Fin Tube-with Slope Top Cover BASEBOARD -9# IN. HIGH. Shipped in lengths of 1 through 8 ft. Installed without screws or bolts. Bracket slides into notched grooves. Front cover snaps on. End pieces, covers and joint strips all snap into place. Element made with aluminum fins and % in. copper tubes, expanded at end ready for sweating. . CAPACITY OF EMBASSY BASEBOARD--TYPE F Average Hot Water Temperature: Btu/hr per linear foot 1 gpro 65F Entering Air J55F i 160F 450 1 480 165F 510 170F 530 175F 560 180F 590 185F 620 190F 650 195F | 200F 1 6S0 1 710 I 210F 760