Document zd8xkNVg5R9Q8RGj6V91DKbea

m No. Tool No. 28 D-153 29 D-154 30 D-155 31 D-156 32 D-157 33 W-162 34 W-262 :*35 W-343-44D 36 C-452 37 C-524-A 38 C-685-A 39 DD-914-P 40 DD-914-9 41 C-3281 42 C-293-3 Description Installer--Front Brake Hub Inner Bearing Cup (Regular) Installer--Front Brake Hub Inner Bearing Cup (Heavy Duty) Installer--Front Brake Hub Grease Seal (Reg. & Heavy Duty) Installer--Differential Side Bearings Installer--Axle Shaft Outer Oil Seal Installer--Flange or Yoke Installer--Rear Pinion Bearing Cone Remover & Installer-- Axle Shaft Bearings Remover--Flange or Yoke Torque Wrench (100 ft. lb.) Torque Wrench (300 inch lb.) Press Adapter Ring Holder--Flange or Yoke Adapter Plug-- Differential Hub Item No. Tool No. 43 C-4049 44 C-4053 45 C-4169 46 C-4170 47 **48 **49 **50 **51 **52 **53 54 C-4171 SP-3020 SP-5017 SP-5026 SP-5439 SP-5442-D SP-5443-A D-128 Description Remover--Bearing Cups Torque Wrench (300 ft. lb.) Wrench--Upper Ball Joint Removing, Installing & Torquing Wrench--Wheel Bearing Adjusting (Lug Type) Handle--Universal Washers Adapter Ring Bolts Adapter Plate--Installer Adapter Set--Removing Flange Plate Dial Indicator Set *Pinion Setting Gauge and Master Differential Bearing Kit D-l 15-44 **Axle Shaft Bearing Removing and Installing Kit W-34B-44D ***40 Degree Steer Front Ball Joint Removing and Installing Kit D-150 ****Inner Axle Shaft Seal Installing Kit D-112-44 Note: Torque wrenches C-524A, C-685-A, and C4053 are optional and can be purchased separately. These Torque wrenches are not included in the DW-44 Axle Tool Kit. AXLE IDENTIFICATION All Spicer axles are identified with a manufac turing date and the complete part number stamped in the right hand tube. Also each axle contains a gear ratio tag; and if the axle is equipped with a limited slip differential, it will contain a tag re questing the use of limited slip lubricant. In the figure the axle is identified with Ys" high numbers stamped in the tube. For example, the numbers 10-10-2 A5 is the manufacturing or build date of the axle and is interpreted as follows. The first number is the month, the second number is the day of the month, the third number is the year, the letter is the shift and the last number is the line that built the axle. For example: October 10, 1972, first shift, line 5. 10 to. 2 A5 60.3,403 5- NOTE In the event there are two build dates, the latter will be the date in which the brake components were assembled. It is recommended that when referring to the axle, obtain the complete part number and build date. To do this, it may be necessary to wipe or scrape off the dirt, etc., from the tube. Figure 3 NOTE On front driving axles, the above numbers can be either on the long or short tube. imho 5