Document zaoMpJL41L4NOXMaVJgNwEEB

THE MENNEN COMPANY STANDARD PRACTICE BULLETIN Sheet- 1 of- 1 Issued to: President . Copies to: Vice President (Research & Development) Vice President (Domestic & Ehport Mfg.) Plant Manager Production Manager (2) ' Control Chemist Research Chemist .Subject Bath Talc For Man Manufacturing Procedure Bulletin No_____________ _________ ________ Dote June g, 1953___________ BATCH SIZE: 2000 lb. RATH TALC FOR MEM MANUFACTURING PROCEDURE EQUIPMENT: SAME AS FOR BAEH POWDER NOTE; All equipment must be as clean as possible before starting a run of this product. MANUFACTURING PROCEDURE? Pass the following through the sifter (to break down large lumps) into the mixer: * Talc, Italian #1600 (9 x 110 lb. bags) 990 lbs. J* (Whittaker, Clark & Daniels) Magnesium Stearate 63 lbs. Boric Acid - Powdered 63 lbs. Talc, Italian #1600(8 x 110 lb. bags) (Whittaker, Clark St Daniels) 880 lbs. Start the mixer and then after 5 minutes with the aid of a metal funnel, through an opening in the top of the mixer slowly add: Perfume (TlM-M) (J. Manheimer) ^ lbs. After all the perfume has been added, continue mixing for 10 minutes. The powder is "then finely divided by passing it through the Pulverizer (screen #0.027 or #0.035/ end into the Hopper. The smooth, soft powder is then ready for packaging. The amounts of all ingredients above correspond to those given in our latest approved Standard Practice Bulletin dated February 3, 1?53* PLAINTIFFS EXHIBIT WCD-348 Supersedes - IO-SO 105 Issued bv M. K azm aler ' 1 EXHIBIT ] I p H- 1 r <GP-MENNEN-00000797 .......................................... ' '