Document ykMd1Zw3gLarkBZXdG6LVBJjr

Engineering Material Specification Material Nam* Specification Number GASKET, STEEL CORE-ASBESTOS/NITRILE BUTADIENE RUBBER BINDER-COATED 1. SCOPE ESE-M8G72-A WO PART X KEF. The materia! defined by this specification consists of a low carbon steel core covered on both sides . ith asbestos and nitrile butadiene rubber binder. The assembly is coated with an antistick coating. 2. APPLICATION This specification was released originally for material used for cylinder head gaskets where high temperature end antistick properties are required. 3. REQUIREMENTS 3.1 CONSTRUCTION 3.1.1 Steel Core Cold rolled low carbon 0.0065-0.0075 in (0.165-0.190 mm) 3.1.2 Fabrication 3.1.2.1 Asoestos and Nitrile Butadiene Rubber Binder Shall be pliec uniformly and bonded to each side of the steel core to meet the requirements of the application. 3.1.2.2 Flanges - SAE-30304 Rustless Steel 3.1.2.3 Coating The assembly shall be coated-with a heat stable, noncarbonizing and rionoily parting film lu meet the antistick and other requirements of the application. The coating is applied to the gasket surtacc^nd shall not be removed as a continuous film. Cms o-j ip' `irr, 3946-e Revisions ::tUnnumbered & Retyped P.v!c.:'v E"-,:6R2 6001 1347 : j^v-4 Page of _2.