Document yLXG5Rkg8XpLjJdbJ2G6Vpvr
MATERIAL SPECIFICATION
AMERICAN HOIST
AK&D CO. SPECIFICATION: D-19 thru 27
G S C lure V
BaZXC
SCOPE: This soecification covers friction brake and clutch li
as soecified tv code on individual AHID Co. cravings.
US
are used on band ype brakes and
hes on
ip.~e.ot including
f *- - -- - --- /
her similar roach
TOLERANCES: 1. Strip
linings
- tolerances shall conform to those established and published by the manufacturer.
2. Block linings - tolerances, unless otherwise specified on AH&D Co. drawings, shall conform to those established and published by the
i manufacturer.
MARKING: 1. All strip material shall plainly show, in a contrasting color, the manufacturer and compound (or style) number. These shall
be imprinted on the outside radius.
2. All block linings shall plainly show, in a contrasting color, the compound (or style) number and the AH&D Co. part number. These shall be imprinted on the side NOT to be used as a friction surface.
3. The outside of each Lining Kit carton must be marked with the appropriate lining kit number and the vendor's code letter which is herein assigned.. The kit number and the vendor code shall not be combined in a single line.
VENDOR
VENDOR
CODE LETTER
American Brakeblok')
Div.
v
JABEX Corporation
Amco (Thermoid Div. B
H.K. Porter Company
Ankorite
C
Bacon
D
Bendix-Eelipse
E
Ferodo
F
Friction Products
G
Gatke
H
Grizzly, Maremont
iAuto Products
I
Lasco
K
VENDOR
VENDOR
CODE LETTER
Mintex
L
Raybestos-Manhattan
M
Reddaway
N
Rusco (Fenner America) P
Southern
R
Standco Company
S
S. K. Wellman
T
Worlabestos Div.
D N7
Firestone Tire & Rubberj
Scandura
X
National Friction
Y
Carlisle
Z
Clarksburg
. AA
Scan-Pac Industrial SalesBB
NOTE: See page 2 for list of currently accepted products.
Supersedes:
D-19
November, 1972
April, 1973
Page J_ of
D-19 thru D-27
Form Engr.-229-A
MATERIAL SPECIFICATION
AMERICAN HOIST
eaoGERsssassesn
Brake & Clutch
LUMl--M
r7*i*>9r*<r*n2xxiar*
ACCEPTABLE SUPPLIERS
AH&D
MATERIAL CODE
AH&D OLD
MATERIAL CODES
MANUr ACTU.-Ci.RS & COMPOUNDS
OF LINING
D-20
}-19A
D-21
D-22
D-193
D-19C
Raybestos-Manhattan G-1000
Reddaway RHC Scanaura 3-72
flexible Strip
if il
n it
it tt
(1)Raybestos-Manhattan G-1500-X4 Flexible Strip
(2)Scanaura B-72
II ll
American Brakeblok 150-102 American Brakeblok 41-16 Raybestos-Manhattan M-4807 Raybestos-Manhattan MA-419 Raybestos-Manhattan M-3375-1 Thermoid (AMCO) 7022-1
Rigid Block
D-23 D-24
D-19D D D-19E
Raybestos-Manhattan M-4722 Thermoid (AMCO) D-483-A
Rigid Block
Raybestos-Manhattan R-3375-0 Semi-Flexible Strip
Scan-Pac 242
"
D-25
D-19H
(3)American Brakeblok 150-102 (2)Raybestos-Manhattan MA-428 (1)Thermoid (AMCO) D-813
Rigid Block
M II
ff If
D-2 6 D-27
D-19J D-19L
American Brakeblok 40-176 Raybestos-Manhattan MA-511F
Rigid Block
tl II
Low friction block - until
Rigid Block
experience is obtained,
contact Engineering Laboratory
at St. Paul for latest list.
/
(1) (2) (3) Order of preference within the category.
Supersedes:
D--19
November, 1972
Form Engr.-229-A
April, 1973
| Page 2 of 2
D-19 thru D-27