Document y3nnBmXy1oxqQbXKO791Qngn

Air System Equipment FaSSBdMIwers' Bronson Fan Manufacturing Corp. 4560 Worth Street, Los Angeles 63, Calif. Representatives in Principal Cities Manufacturers of Propeller Type Fan Blades for Air Condi tioning, Heating and Ventilating Equipment. Tested and rated according to NAFM and NEMA codes. HI-STATIC SERIES--Quiet operation against static resistances. Gives nigh air volumes at reduced fan depth. Diam eters 11 in. through 16 in. Neoprene hubs available. HI-STATIC SLINGER RING--Con densate eliminating fan blade for use in air conditioning units where space is a factor. Exceptionally low noise level. Hi-Statie Series Static Pressure Series Free Air Three Blade Hi-Static Slinger Ring STATIC PRESSURE SERIES--For effi cient air deliveries against static pres sures- Diameters 8 in. through 20 in. Pitches 6 deg to 40 deg. Also in THREE BLADE SERIES. STATIC PRESSURE SLINGER RING-- Designed to eliminate condensate in air conditioning applications. Ring can be positioned anywhere on fan blade. Neo prene hubs available. S. P. SHnger Ring FREE AIR THREE BLADE SERIES-- Bright finish aluminum blades, steel spider. High efficiency in free air. Diam eters 8 in. through 30 in. Pitches 6 deg to 40 deg. FREE AIR FOUR BLADE SERIES-- Wide overlapping blades assure quiet operation. Sturdy construction. Diam eters 8 in. through 30 in. Pitches 6 deg to 40 deg. Free Air Four Blade HURRICANE SERIES-^Semi-pressure type for efficient use against low static resistances. Diameters 12, 14 and 16 in. Neoprene bushed hubs available. K-D SERIES ATTIC FAN BLADES-- Heavy duty construction. Shipped knocked down. Diameters 24, 30, 36, 42 and 48 in. 35 deg pitch only. Hurricane Series Ons-Piecs Series ONE-PIECE SERIES--Available with hub or pierced for unit-bearing motors. Diameters 6 in. through 12 in. Many special designs. SPACESAVER SERIES--Off-set design enables the blades to rotate around motor for space reduction. Diameters: 18 in., 20 in. Three blade only. Pitches 15 deg to 35 deg. 202 K-D Series SpaceSaver Series Air System Equipment Fans and Blowers BROOKSIDE ORRORATION _ McCordsville, Indiana Manufacturers of: Fans Blowers Ventilating Equipment M-PEL-AIR FAN BLADES: Slinger-type for air conditioning, or offset spider and conventional propeller type fans for ventilating ana other applications. All engineered exactly to your specifications free of charge. Slmger rings are all onepiece die drawn. Research and laboratory facilities available to solve air moving problems on your product. M-PEL-AIR SIX BLADE: One-piece con struction and fabricated in a wide range of diameters, any pitch in aluminum or steel. Gives efficient air movement against higher static pressures. Solid or resilient hub. Also available in three and four blade. i-Blade vrit&oul Ring S-Blade vrilhovt Ring M-PEL-AIR OFFSET TYPE: Gives maximum space-saving features by bringing blade around the motor. Brookside's advanced design blades give higher efficiency and may be made reversible. Offeet-Type Stinger Type 00 Series M-PEL-AIR SLINGER BLADE: Soliddie drawn slinger rings, with the tabs a part of the blade, give low noise level and high efficiency. Designed especially for air conditioning ana refrigeration industry. POWER-FLO 100-SERIES BLOWERS: Specifically designed for higher pressure ventilating and exhaust systems. Sturdy construction with conical shaped inlet ring welded to blades. Backwardly in clined for non-overloading and low noise characteristics. Both statically and dynamically balanced. 14 to 60 inch diameter. POWER-FLO 200-SERIES BLOWERS: Designed for lower pressure applications. Fabricated of aluminum or steel, rug gedly built as well as lighter in weight; riveted constniction throughout. Back wardly inclined blades for low noise and non-overloading characteristics. Static ally and dynamically balanced. 11 to 60 inch diameter. 203 9-Blade tOO-Series