Document xzVEKa72mvdD3OQxEo41DOB5g
/ /V ? -
*0.. r* *
s H^wgjfs It :
9'a
INSULAIINC MATERIAL '
fCo i/r* Z3
--e
KSSLATIHO MATERIALS
SHELL OIL CCHPAHY WOOD RIVER REF1HERY
Revised May 1937
IHSULATJB WLTgPTt|g
SHELL OIL COMPAHI WOOD HI7KH HETIHBBJ
HEVISKD MX 1957
CONTENTS
Page
INSULATING MATERIALS FOR HOT SERVICE
BLOCK INSULATION Caltemp, Tri-Oolite or
Magnesia................................................ ...................... ..
Mono-Block, supertemp or Detrick................................... .........................................................
Superex Block.......................................................................................................................................
1 2 3
PIPE COVERING Split Cylinderical Pipe Covering......................................... ................................................... Molded Bisectional Pipe Covering........... .......................................................... ..................... Super Molded Bisectional Pipe Covering..................................... ..........................................
4 5 6
BLANKET INSULATION (Lead or Steel Slag Base)
1" Galvanized Poultry Mesh on One Side and Copper Bearing Metal Lath, on Opposite Side..................................................................................................... .. Boll Type Blanket Insulation .
(Special for Tanks vith Asbestocite Boards Only)...,.................................-............
7 8
INSULATING CEMENT
Asbestos Cement (Onecote) --................................. ................ .............................. .................... 9
Asbestos Cement (Rough Finish)..................................... ....................... ..
10
Asbestos Cement (smooth Finish)....... ...................................... ................................................ .. 11
Interliner Cement.................... ;................................................... .................................................. 12'
WEATHERPROOFING Thermotex B or Fllntkote C-13-A Weatherproofing Compound......................................... Eagle Stalestic -Eytemp Plastic Cement............ ............ .............. ............... Firetard............................................................................................................................... Flextone Felt.............................................................
Coal Tar Saturated Asbestos Felt................................ ..................................................
13 14 ~ 15 IS
17
AUXILIARY MATERIALS st**! s trapping........................................................................... Gopperized Staples........................................................ Poultry Netting................................................................................................. ........................ .. Asbestos Fibre Felt Paper................................. .......................................................................... Asbestos Woven Textile Tape................................
18 18 18 19 19
Rev:5/27/57
C 0IT1IIS
UBULATIHG MAX3SIALS JOB COLD SSB7ICB
Pago
BLOCK EJSOLATIOIT Molded Vegetable Carle Block (Without Asphalt Backlog)..........................
1
FTPS COVERING Zerollte - Bock Cork Molded B1 -Sectional Pipe Covering (Ice Water Thickness)............................................................................................................... Vegetable Cork Molded Bl-Sectlonal Pipe Carerlag (Special Thick Brine Type). 1................................................................................................ Vegetable Cork Molded Bt-Sectional Fitting Shapes (Special Thick Brine Type)........................................................................................... .... Supplementary Data........................................................
S
3
^ 5
BLANKET INSOLATION Hair Pelt Blanket.............................................................................
6
AtntTIJABY MATERIALS
-
For Use With Lov Temperature (0F to -40F) Insulation.......................................
Vegetable Cork....-.................................................................................
Brine Putty............................................................
Erection Asphalt..................................
Cork Cement..........................
Wood ' Sleavera.................... ............................................................... .....................................
7 7 7 7 7 7
TBSH DATA Required Pipe Corering Sizes for Steam Traced Piping
1
DrgPIACTBC MATERIALS 7
hot arnica
block: raspLAncg
Inaplating Material* for Hot Service BLOCK IRSULATION
Rage 1 8action 1
I
Source:
Temperature: Weight: Characteristics:
Shown in order of choice:
1. Caltemp
= Psbco Products Incorporated
2. Tri Calite = Mundet Cork Corporation
3. 85J& Magnesia = Johns Manvllle
1200F maximum (85$ Magnesia - 600F)
Approximately 1.4 Its. per square foot per Inch of thickness.
Rigid, vithout tensile strength.
Principal Application
Flat sections used for insulating vessels, flat surfaces and
building boxes aronnd irregular shapes.
,
Fourteen inch radius curved sections used for insulating equipment 12", A" and 16" in diameter, principally flanges and fittings.
Extent of Application
Is limited due to fragile nature of material, breaks readily In hand! Ing and has little or no recovery value vhen temporarily removed from an Installation. However, on permanent Installations, such as vessels, material has considerable merit.
' Werehouse Stock: Curved and flat shapes:
Slxe
Per/Mo.
x 6" x 36" Flat Sections ij" x 6" x 36" 14" Radius Curved Sections
244 pcs. 424 pcs.
Rev. *KD:3/9/56
Insulating Material* for Sot Service
a Section l
Source:
Temperature: Weight: Characterlatics:
.biiJCr rssDLATias.' -: TZ: r. --rrr-rr;.zr
Shovn In order of choice:
1. hono-Block 1
9 Bolivia. Hill
2. SuperteapBlook > SagLe PIchor
3- betrlck
= Detrick
170CPP maximum
1.66 lbu. per aq. ft. per Inch of thickness
Semi-rigid, fair tensile strength ,
Principal Application
I Insulating material betveen hrlckvork and metal casing In boilers and process furnaces. Also .used for breeching linings.
Extent of Application
-
Limited, but increasing for application on vessels. Semi-rigid material vill fit radii of vessels vlthont LL breaking or scoring.
Warehouse Stock: Molded Block
Sine
Par/tto.
1-1/2" x 6" x Iff* Flat Sections
282 pcs.
Bev.
-.3/9/56
V
. Insulating Materials for Hot Service r'
3 Section l
c\
- BI0CX IBSUUT1CH .
Source: Temperature: Weight: Characteristics:
fitrpersx BlockJohns Manrille 600P to 1900F atfyl wiTin 2.0 lhs. per sq. ft. per Inch of thickness Rigid, fair tensile strength
Principal Application
Flat sections need for refractory installations laboratory ovens, furnace breechings, etc.
Extent of Application
Hot in general use as high temperatore applications for vhlch material is designed' are limited in number.
Warehouse Stock: Molded flat and block.
Sire
Min. Stock
2? x 6* x 36" Flat Sections
100 pcs.
Rev.
(. FKD:3/9/56
PIPE C07XHUKJ
Insulating Materials for Hot Service
Pag* k Section 1
SPLIT CYLDHRXCAL PIPE COVERING
Source!
Temperature: Weight: Characteristics:
1
Shorn In order of choice:
1. Snap-On - Gustln-Bacon Mfg. Company.............. 2. Mono-Cover - Baldwln-Hill Company 3. Imperial - Ruberold Company (Asbestos Sponge)
350F maximum (Asbestos-Sponge - 550P )-
Snap-On and Mono-Coveting are-approximately 1/lv lighter than other pipe Insulation
Springy, tough resilient structure, will not shrinknor break, moisture resistant. Asbestos-Sponge, semi-rigid, distorted readily by moisture.
Principal Application
Low pressure steam or hot water supply end return piping, Steam traced lines,jhot line shields for personnel safety, (Snap-On and Mono-Covering only for cold water piping above 5F), lines close together where Insulation distortion is necessary for application, and for use on vibrating lines.
Extent of Application
Limited, sponge Is too pliable, disintegrates readily when exposed to moisture.
Warehouse Stock: Single standard thickness In 6 ft. lengths for piping ss follows:-
Size
Per/Mo.
iA" x 1"
V2- x l"
3A" x I" i" X 1"
1-1/2" X 1"
2" X 1" 3" X 1"
km X 1"
5" X 1" 6" X 1"
thick
PI
ft n It
n
it it it m
Her.
FED:3/9/56 Rev.5/27/57
2k
378* 23fe* 381' 20h'
333'
165'
132'
57*
129'
Insulating Materials for Hot Service
Pagfr 5 Section 1.
MOLDED BISECTIONAL PIPE COTSRPC
Source:
Shown In order of choice: i
1. Ohlbestos 2. Thermobesto6 3 Kaylo
- Union. Asbestos & Rubber Co. - Johns ManvlUe - A. G. Brauer
Temperature:
12O0F maximum (Uaibestos, 75.09F maximum)
Weight:
1.0 lbs. per sq. ft. per Inch of thickness
. Characteristics
Rigid, fair tensile strengths Efficiency comparable to 85^ Magnesia of l/2" greater thicknesses.
Principal Application
Pipe covering on process and utility lines operating at temperatures under 750F.
Extent of Application
In consnon use because of high Insulating efficiency and ease of handling. Material can be removed and replaced repeatedly without breakage or lose of shape. Tharmobestos and Kaylo slightly.more fragile.
Warehouse Stock: Standard thickness'in 36" lengths for piping as follows:
Size
Per/Mo.
Rev. PED:3/9/56 Rev.5/27/57
1-1/2" x 1-1/2" thick
1-1/2" x 2" . 0
2" x 1-1/2" 2" x 2"
* 0
3" x 1-1/2" 0
3" x 2" 4" x 1-1/2"
n n
4" x 2"
n
6" x 1-1/2" n
6" x 2"
n
8" r 1-1/2" n
8" x 2" 10" x 1-1/2"
>1 n
10" x 2"
n
12" x 1-1/2" 0
14" x 1-1/2" 11
14" x 2"
11
12' U2 1
33' 69' 21' 282* 601 216 '
96' 222' 21)6'
105' 96' 30' Oh-
39' 3'
Insulating Materials for Hot Service
Page 6 Section 1
Source:
Temperature: Weight: Characteristics:
SUPER MOLDED BISSCTIOHAL PIPE COVERUJG
Shewn In order of choice:
1. Unlbestos
- Union Asbestos & Rubber Co.
2. Themobestos - Johns Manvllle
3- Kaylo
- A. G. Brauer
1200F maximum.
1.66 lbs. per sq. ft. per inch of thickness.
Rigid, fair tensile strength. Efficiency comparable to 853 Magnesia of l/2" greater thicknesses.
Princiuel Annllcatlon
' Pipe covering on process and utility lines operating at. temperatures between 750? and 1200?.
Ertent-nfJAnpllcatloa:
In common use because of high Insulating efficiency and ease of handling. Material can he removed and replaced repeatedly without breakage or loss of shape. Ihezmobestos and Kaylo slightly more fragile.
Warehouse Stock: ' Double standard thickness In 36" lengths for piping as follows:
Site
- Per/tfo.
3" x 3"
4" x 3" 6" x 3" 8" x 3" i _L0" x 3"
12" x 3" 14" x3" *14" x 4"
thick "
." "
" " "
24'
:93` 117*
48' 45 `
15' 9* 9`
Above principally used for outlsde high pressure steam mains.
Res.
PED: 4-2-56 Rev.5-27-57
BLABKBT DESOLATIOH
TnouLatlng Materials for Hot a errIce
______ Page 8 - Section 1
ROLL TCPB HLAHKET IH5ULATI0N (Special for Tanks vith Asbestocite Boards Only)
(Long Class Fiber Insulation Bonded Together with a Thermo-Setting Plastic Resin)
Source: Temperature:
1. Ultrelite #150 - Gustin-Bacon Company
2. Aerocor
- Ovens-Corning FibexGlas
maxlmuai
r
Weight:
Are approximately l/lO to l/h lighter than other blenket insulation.
Characteristics: i
Springy, resilient, will not break, moisture resistance will not corrode metals and does not shrink.
Principal Application Blanket Insulation on tanks operating at m-tmum 1*25F >
Extent of Application
Used In all new tanks and vessel construction where welding Is permitted to allow use of Improved methods that Include the installation of "Asbestocite" weatherproof covering.
Warehouse Stock: In rolls.
Size
Min. Stock
l-l/2" x W" x 150'
Rone normally carried In stock.. Purchase as required.
PED:3/9/56
Rev. 5/27/57
IbSu-LArlrig cagm
Insulating Material* fear Hat Sorrlce
ASBESTOS OftCHT (OKBCOTE)
____9 Section l r*
Source:
Eagle Plcher Onecote Cement or Dotrlck Utility Cement
Temperature:
1500*V wwrtmwm'
Weight:
Approx. 3 lbs. per sq. ft. per Inch of thickness
Characteristics:
A plastic vater mixed material applied vlth a trove1, highly adhesive and durstla. Quick Betting one ooat applications vhlch do not shrink or crack - reduce job costs. Appro. coYorage lo Bq. ft. per 100 lbs., 1" thick. This is preferred for general use.
Principal Application
Traveled on Irregular shapes, fittings, pomps, ralTo bodies, eto. Used In conjunction vlth poultry vlre ou monolithic applications.
Site 50 lh. bags
Warehouse Stock
Pernio. 87
Bor. KD: 3/9/56
M*
T-wnnT jtlng MaterlalB for got Sarrica
Page 10 Saction
ASBBSTCS CBMEBT (BOUGH FETISH)
Source:
Shovn In order of choice
1. Xagle PIchor Insulating canont "66" 2. Johns-Mamrille insulating.cement "450" 3- Weber 48 insulating cement
Temperature:
1500^ maxlmnm
Weight:
Approx. 2.0 lbs. per sq. ft. per inch of thickness
Characterlstics: A plastic vator mixed material applied, vlth trovel, highly
adheslTe and durable. Approximate corerage, 50-55 a<l. ft., i 1" thick, per 100 lbs.
Principal Application
Troveled on Irregular shapes, fittings, pomps, ralTo bodies, eto., used in conjunction vlth poultry vlre on monolithic applications.
Extent of Application
-In videaproad AnA popular use. Adheres readily to hot surfaces and can be reclaimed by mixing vlth vator after removal.
Size
50 lb. bags
Warehouse- Stock
PerAte. 56
Bar. pn>: 3/9/56
Insulating Materials for Hot Service
ASBESTOS CBMEST {smooth FUTISEy
Pogell Sectlea 1
Source:
Johns Maorilie #302 Cement
Temperature:
lOOOF mart main
Weight:
Approx. fc.O lbs. par sq. It. par Inch of thickness
Charactarlstlca: A plastic vatar mixed material applied vith trowel, adhesive and durable, approximate corDrage, 25 Bq. ft. par Inch thick, par 100 lbs.
Principal Application
Finish coat applied over Insulating material on Interior and exterior Installations, for smooth finish end painting surfaces.
Extent of Application
tlaei extensively to cover rough primary coat on monolithic Installations prior to weatherproofing.
Size 100 lb. bags
Warehouse Stock
Par/Mo. 11
Rev. FED: 3/9/56
Insulating Materials far Hot Serrlce
fugs 12 Soot lan i
UfrKkl.lH.ffi CBMKHT
Source:
. Insul&g r Quigley Products Company
Teaperatore:
2200? marl arm
Weight:
2.0 lbs. per sq. ft. per Inch of thickness
Characteristics: Water nixed plastic material applied through nozzle under air pressure from small TeSBel. It can be travel,applied In accessible locations.
, Principal Applications
Used for insulating double vailed piping at Catalytic Crackers. material la blova Into apace between pipe end liner, and' reactor' dnets at Toluene #2.
Extent of Application
Limited to aboro outlined application at Catalytic Crackers, and Toluene #2.
Warehouse Stock
Size
Min. Stock
In 100 lb. bags
30
Bor. PKD:3/9/56
VKftTEggPBOQnKG
i
('
Insulating Materials for Hot Sarrioo
V
. xiigttriOTgi b as mfrxjOT-S c-13-A V2ATESRPH0Q?rSG COMPOCHD
Page 13 1
Source:
1. Thermotex B - Phillips Carey 2. Fllntkote C-13-A - Fllntkoto Company
Temperature:
250? maxi imim
Weight:
12 lbs. per aq,. ft. per inch of thickness
Characteristics: Beady mixed black plastic asphalt base material - vater added _ in field as needed.
Principal Application
Weatherproof coating on all exterior field molded Insulation, Teasels, beat exchangers, fittings.
Extent of Application In popular nee on Installations ahovn.
Site In 30 gal. drums
Werehousa Stock
Per/frlo. 19 drums
1. . Hot. PED:3/9/56
! J
fc
Trmni*tiog Materials for Hot Serrlce________ BASIS stalastic-hitemp plastic cpcbt
paga l !. 8action T
Temperature:
450*V mn-Hmnm
Haight:
12 lbe. par eq. ft. par Inch of thickness ,
Characteristics: A pLaatlc asbestos and asphalt material, adherent to metal and Insulation.
Principal Application
To aeal boiler and furnace brickwork externally. Also for weatherproof ing around nozzles on columns and to seal motel Joints in ducts and sidings.
Extent of Application Limited, used only as Indicated.
Size lb. Containers
Warehouse Stock
Min. Stock 5
|
i
i
i
Her. ?D:3/9/56
I
I
In*Plating Materials for Hot Service
13 j
Section I 1
FISETARD ASPEAIg BACKED SHEET ASBESTOS FELT
Source: Temperature: Weight: Character1sttea:
Johns-Manville 350PF maximum 55 lbs. per roll of 108 sq. ft. Similar In nature to rolled roofing.
Principal Application
Weatherproof covering over all fore* of Insulation, principally on piping. Ia also nsed frequently to directly cover saall steam tracing lines and traced line In one trap ping without the use of standard type pipe coverings. Material la frequently nsed in lien of other Insulation where destructive elements are present due to. low replacement costa.
Extent of Application
In general use. Low cost, ease of handling and good relnstallatlon'experience Indicates material to he most suited to refinery requirements.
Warehouse Stock: In rolls (black side out)
Site 32* wide x 1*0* long
Per/Mo. it8 rolls
Er. EKD:3/9/56
p --
InavQ ntlng Materiala for Hot Service
Page l6 Section 1
rLEXTCWS felt PODBLB ASPmlg COATED SHEET ASBESTOS FEl/T
Source: Teaiperature: Weight: Characteristics:
Johns Manville 150P maximum 50 lhs. per roll of 108 sq. ft. Rool roofing type of material.
Principal Application
For veatherproof covering on piping Insulation.
1
Extent of Application
Limited to use on piping in open areas, such as tank farms. Material is not fireproof and cannot he used in operating areas.
- Size
36" vUe' x 36 1ft.. long
Warehouse Stock
Per/Mo. 9
1
!
11
Her. PED:3/9/56
I
Insolatlog Material* for Sot Service
?8a 17
.Section 1
COAL TAR SATURATED ASBESTOS FELT
Source: Temperature: Weight: Characteristics:
Johns Msnville 100? maximum 15 lbs. per 100 sq.' ft. Similar to a light weight builder's felt.
Principal Application
For underground piping protection against external corrosion. To be used only with coal tar base hot flnld | coatings.
Extent of Application Limited to underground piping.
Warehouse Stock: In rolls
Site
Min.. Stock
3^* wide x 150* long
6 rolls
Hew. FED:3/9/56
AOnXIAHY MATE3BXAL3
Insulating Materials for got sarrlco
Page 18 Sectton 1
Ammitr materials
STSSL STRftJ'i'JJUr
Used to bold monolithic, blanket and block typo Insulating materials in place on Teasels and amall tanks.
Warehouse Stock
Site
l/2" x 22 Ga. Galvanized Acme Steel Strapping l/2n Locking Seals for Stropping
3A" x *03? Thick Galvanized Acme Steel Strapping 3A" Locking Seals far Strapping
Min. Stock "
6 rolls l/2 keg
10 rolls 1/2 keg
C0PEEB3ZKP STATUS
treed to hold, poultry netting In piece over monolithic and block insulation on Irregular shapes.
Warehouse Stock Size _ 3A" 2 2" long Square Shoulder Copperlzod Staples
Min, Stock 2 kegs
PCOLTHT HgTTCHG
Used far full coverage support of monolithic, blanket and block type insulating materials on vessels and email tanks..
Warehouse Stock: In Bolls Size 1" Mesh 1 b8" x 150* Lang - 1? Ga. Galvanized Wire
Min. Stock 10 .
Bev. rau: 3/9/56
Insulating Materials foaf Hot Sorrlco
19 Section. 1
ASBBST08 PAPES AHD TAPE
ASBESTOS ITEHg FELT FAP5H
Used principally by welders as beat shields and In construction of temporary Btress relieving furnaces. Thera Is little or ho use for material as a permanent Installation In operating equipment.
Warehouse Stock: In Bolls
Size
l/l6" Thick x 36" 1 34' 1/8" Thick x 36" x 3^' - Frazier l/4" Thick x 36" r 34'
Min. Stook ~
100 lbe 100 eq. ft.
4 rolls
ASBESTOS WCfm TgEULB TABS
Used principally by Boilermakers for duct and similar Joint seals such as fractionating column tray segment installations. Moderate quantities used as gaskets by Machinists. Ons Inch used by
Insulators on copper tube covering.
Warehouse Stock: In Bolla
Sica
Min. Stook
1" wide x 1/8" Thick 1-3/4" wide x 1/8" "
1-3A' vide x 5/16" " 3" wide x 1/8" " 5" wide x 1/8" "
500' 200*
50' 50* 50'
FED: 3/9/56
I IKSGLATIIC MAT2EIA1S FOB COLD SBSTiCS
i
SLOCK mSTHATlaB
pro congress
t
Insulating Matartale for Cold 'Bervloe
Pago 1 ScotIon 2
MOLDED TBSBEABLE CORK BLOCK (without asphalt bachhc )
Source:
Armstrong or Mosdst
Temperature:
0? to -40F
Weight:
Approx. 0.66 lfaa. per sq. ft. per Inch of thickness
Characteristics: A rigid molded natural cork product, highly moisture resistant. Susceptible to acid attack. It has highest relative efficiency for all cold service Insulating materials.
' Principal Application
Cold process and low temperature refrigeration equipment In acid free service.
Extent of Application
In extensive use - clean light weight material, can be readily fabricated into Irregular shapes end applied.
Site
2" x 12" x 36" 3" x 12." x 36" h" i 12" x 36"
Warehouse Stock: Plat Shapes
29 19
6
Bev. FED: 3/9/56
i
Insulating Materials fear Cold Service
Page 2 Section 2
Z3B0LU8 - BOCg OQHg MOLDS) BI-SECTIQHAL PTPZ CGVXBIBG
(ICB WATER THiemss)
Source:
Johns-Maorilie
Temperature:
30 to 45y
Weight:
1.25 lbs. per eq,. ft. per Ieoh of thickness'
Characteristics: A rigid, relatively heavyj molded mineral woolproduct. It Is highly resistant to moisture and acid attack.
\ Principal Application
Used In ammonia refrigeration unite and other installations ''subject to chemical vapor and fluid attaok.
Extent of Application Limited to medium cold service.
Warehouse Stock: Ice water thlckneee in 3" lengths. Site
1-1/2" ns x 1.52" thick 2" " x 1.52* M 3" " x 1.50" m Km " 1 1.75" m 6" " x 1.75" m
8" " x 1.94" 10" X Ice Water n 12* X ** "
'
Min. Stock 30* 30' 30* 36* 30* 18' 12* 12'
Her. FKD:3/9/56
Insulating Matarlala far Cold Service
Pga 3 Section 2
TEGETABIK came MOLDED BI-SECTIOHAL PEPS CCfTEKDTS
(SPECIAL THICK BRDg TYPE)
Source: Temperature:
Armstrong or Mundot
0F to -toy
Weight:
Approximately 0.66 lbs. par aq. ft. per Inch of thickness
Characteristics: A rigid molded natural cork prodnct, highly moisture resistant! Susceptible to acid attack. It has highest relative efficiency for all cold service Insulating materials.
Principal Application
Cold process and lov temperature refrigeration piping In acid free areas.
Rxtent of Application
In popular use, clean light velght material that can be efficiently applied.
Warehouse Stock: Special thick brine covering In 3 ft. lengths.
Site
1-1/2" US x 2.99" Thick
2" " X 3.25"
3" " x 3-06" fl
. J" " i 3.31" 6" " x h" 8" x
It 1*
Min. Stock .
12* 12* 12' 30' 12' 18'
Rev.
PED:3/9/56
IneoX&t*"? Materials far Cold Service
Page Section 2
YBgmBLS come MOUSED BI-3SCTXCWAL TlTTTSd SHAPES
(SPECIAL TUcr BHUQ5 TIPS)
i
I 1
Source: Temperature:
Armstrong or Mundet 0F to -1*0?
Weight:
Approx. 0.66 Lbs. per sq. ft. per Inch of thlokneas
Characteristics: A rigid mold naturalcork product,highly moisture resistant.' Susceptible to acid attack. It has highest relative efficiency for all cold service insulating materials.
} Principal Application
Cold process and lav temperature refrigeration piping In acid free areas.
Extent qf Application
In popular use, clean light weight material that-can be readily applied.
t
Warehouse Stock: Molded shapes in special brine thicknesses.
Size
Min. Stock
2" -flange Covers
3* V- . "
6 " -
2 2 2 2
3" - flanged Tee Covers 4" 6" -
3 3 3
Bor. PED:3/9/96
I
i
Insulating Materials for Cold Sorrlco .
r
Pegs $ I Section ~Z J
dld'fLEMESTABT DA1A There are no cork materials specified oar carried In atook for cold
II j
aerrlee in the temperature range 0F to 30r, metoriel requirements in thin range are rare, for nev units or plant changes the special thicknesses required vlll haTe to he ordered accordingly. Maintenance replacements vill he made, as needed, vith the nearest thickness of material available from stock.
l
i i
i
Bov. PKD:3/9/56
l
BXAHXET IBBULATIOH
1
Insulating Materials for Cold Service
Page 6 Section 2 i
HAXB TS1X BLAHKET
~~ -
i
Source: Temperature:
Jdma-Manvllle 32? to -4op
Weight:
.69 Its. per aq,. ft. per Inch of thickness
Characteristics: An animal hair product, very pliable
Principal Application
Wrapped around fittings and Irregular shapes in seTeral thicknesses for cold Berries.
Extent of Application
Limited, used principally far temporary insulation installations In
( moderate cold service. Material cannot he recovered for reuse.
Size 1" x 72" x 50' long
Warehouse Stock: In rolls
Min. Stock 1 roll
PKD:3/9/56
AgmjAHr maototam
TTinniBt<"ff Materials far Cold ~Serrics
rag -1 Section 2
AUHIXABY MATERIALS FOB U5S VHH HV TaggHATOHS
(Q6? TO -*K)F) THBULATICgf
; . Vegetable Cork (Coarse Ground) - Supplied by Armstrong or Mondet. Used as a filler material In boxes around irregular shapes packed to a dens Ity of approximately 6 lbs. par sq. ft.
Warehouse Stock: In 3? lb. bags
Coarse Grade Only
Min. Stock 5
Brine Putty - Supplied by Armstrong or Mondet. Used aa a Joint filler on molded cork installations. Sets semi-solid, must be heated to apply.
Warehouse Stock: In 50 lb. Cartons
' Min. Stock ' ----- 5-----------
Erection Asthalt - Applied hot to molded cork board for sealing and oementlng to Insulated surfaces,' also used In the same manner between cork board surfaces.
Warehouse Stock: In 100 lb. kegs
Mln. Stock 6 kegs
Cork Cement - Supplied by Armstrong. Applied to seal Joints of molded pipe cororlogs and fitting shapes.
Warehouse Stock: In One Gallon Cans
Armstrong 3^0 Cement.
Mln. Stock 10 gal.
Wood Skevers - Used In conjunction with built up cork block installations In a manner similar to the common nail.
Site
Warehouse Stock
Mln. Stock
w*
lA" x 5" Long
lA" x 7" Long
Bor. PKD:3/9/56
_ ~
6 boxes 6 boxes
/
tgGH.~DAIA' - .
I I I
II
V
I I
V.. I
Tech; Data
.i
gaga Section
WU1BB) FCPg COygHTSC SIZES FOB SntAM THACKD PIPIKC
The rcommanded insulating material sizes fear pipe cotorlug that Include steam tree tug llnea ere:
Pipe Sire
Par 3/8' to 3A" Steam
Treeera Added. TTae
1" 1-1/2"
2"
3" h" 6"
8"
10" and orar - Use same sire pipe covering.
1-1/2" Pipe Corering
. g"
*
2-l/fe"
^n
h
j" "
9" "
I
e *
Xt is more economical to fill the open Joints vith plastic asbestos fillers than ;o use the next Blze covering.
Pipe covering ohe same as tie line size can he used vimro the ateam,
tracers are no larger than 1
and 3/l6".
*The 7" and. 9" pipe eoYoring is not a stock size and vill hare to he parnhased according to Job requirements.
Her.
ekd :3/9/58