Document x5wrqD1rmJBeJqO33Mr3MGmkG

Air System Equipment *?;f/'s Tuttle & Bailey, Inc. New Britain, Conn. ADJUSTIBLADE REGISTER A very inexpensive register. The air flow may be deflected sideways by the individu ally adjustable face vanes, and up and down by back blades. Also available with Flexair design (sectionaliy adjustable) face. AIR CONDITIONING GRILLES Furnished in a fixed deflection (Airline design) and a sectionaliy adjustable (Flexair design) type with bars running either vertically or horizontally. DOUBLE GORE OUTLET The vertical front bars are sectionaliy adjustable for sideways deflection. The horizontal back bars are either sectionaliy adjustable (Flexair design) or are of fixed deflection (Airline design). DOUBLE DEFLECTION OUTLET Made with front bars of fixed deflection (Airline design) or with front bars sec tionaliy adjustable (Flexair design) and individually adjustable back blades. SANTROLS A simple device to provide positive control of air volume throughout an entire duct system and insure even distribution of air over entire outlet face. Mcknight register Provides positive control of air volume at the outlet. Scientifically designed volume" ' control louvers are operated by .means of a special key furnished with each register. 928 REMOTE CONTROL Ideal for hotels, office build ings, large public buildings. Makes possible individual control of air volume by the mere turning of a knob in every room throughout the building. A real advance in air conditioning for large buildings, yet compara-, tively inexpensive to install.. Registers Air System Equipment Tuttle & Bailey, Inc. New Britain, Conn. STANDARDIZED ALL COPPER CONVECTOR An all copper convector which has been com pletely standardized to meet every present day condition of steam, vapor or hot water heat. Front panels made with pleasing rounded corners and equipped with the efficient and unobtrusive Airline Grille. Furnished in a Recessed, Free Standing, or Semi-Recessed Type. TUTTLE & BAILEY HEATING ELEMENT All copper throughout. Fins and tubes are permanently fixed by a metallic bond uniting them into an integral unit. Headers are also of wrought copper re quiring a minimum of space arid allowing the use of the greatest number of fins for a given length of element. Copper tubes are scientifically shaped to allow minimum resistance to air flow and maximum contact with fins. PACKED IN CARTONS FOR PROTECTION AND EASE IN HANDLING Tuttle & Bailey All Copper Convectors are packed in strong corrugated cartons for full protection from factory to in stallation and for ease in handling. They are useful duringcom pletion of the job as the elements can be installed before plas tering and the carton toapcekneidngu, pcaaucsroinsgs the.elements to deliver their full rated heat and insuring the fronts aeainst damage during plastering" and finishing.