Document x58LO6aeONoVXDk1d55MJgbOy

SECTION III-C-1.2 INSULATION MATERIALS ADHESIVES Flammability Wet: Flammable Dry: Fire resistive Uses - Not to be used on Stainless Steel 1. To bond foamglas to itself for the shop fabrication of valves, flanges, fittings, etc., for dual-temp application on pipe systems, (see note) 2. A joint cement for the dual-temp application of foamglas on pipe systems. 3. To bond foamglas to itself for the shop fabrication of equipment, vessels, and ducts for dual-temp ser vice. (see note) 4. A joint cement for the dual-temp application Of foamglas on equipment, vessels, and ducts. 5. To cement foamglas to equipment, vessels, and ducts for dual-temp service. Solvent Xylol Safety Ul-33 contains a volatile, flammable solvent with a low flash point and must be kept away from open flames. Have good ventilation when using and avoid prolonged breathing of vapors. Avoid direct contact, as it will cause a rash to sensitive skins. NOTE: Fabricated covers and fittings must be placed on a flat level surface until the adhesive has set to prevent the parts from creeping out of position. X