Document x1YQ6XpY2JVzDyyrQoV0dRYdJ

DESIGN AND CONSTRUCTION UNION CARBIDE CHEMICALS COMPANY Division of UNION CARBIDE CORPORATION SPECIFICATIONS VAN-JR1 For Underground Cast Iron Pipe Lines Using "Snap-Look" Method of Joint Restraint September 1961 SOUTH CHARLESTON WEST VIRGINIA PLAINTIFFS EXHIBIT ,eo UCASB00242901 WV-17823 Number VM-JR1 3Date . August 31.1961 PaSe _Jl of_,4 SPECIFICATIONS FOR JOIST RESTRAINT IN CITY WATER ASR COOLING WATER LINES Joint restraint shall he provided by the "Snap-Lock" method. At a31 fittings, latch keys and grooves to receive them shall he provided in accordance with details on page 2 of these Specifications. Assembly of joints shall he in accordance with the procedure outlined for mechanical joints on page 4 of these Specifications. At all slip-type joints ("Bell-Tite"), latch keys or snap rings and grooves to receive them shall he provided in accordance with details on page 3 of these Specifications. Details of latch keys shown in these Specifications are for "Bell-Tite" pipe only. If a slip-type joint other than "Bell-Tite" is approved, appropriate details of latch keys and grooves will he provided. Assembly of joints shall be in accordance with the procedure outlined on page ^ of these Specifications. Latch keys shall he of ASTM A-53 steel, preferably machined from pipe having sufficient wall thickness to provide the required dimensions. Snap rings shall he used In place of latch keys for larger pipe sizes, as shown and detailed on page 3 of these Specifications. Snap rings shall he machined from AISI 1095, or approved equal, spring steel and drawn to a Brinnell 0 hardness of 39 to provide expansion and contraction of the Spring for assembly. Assembly shall he in accordance with the procedure outlined on page 4 of these Specifications. UCASB00242902 DATA FOR SNAP-LOCK DESIGN WITH BELL-TITE.JOINT Number VAN-JR1 Date August 31, I96l~ Page 3 of 4 ~ -SRWG STEEL GROOVE FOR SNAP RING ASSEMBLY SNAP RING DETAIL GROOVE FOR LATCH KEY ASSEMBLY Nom, Dia. Pipe In. - 3 4 6 8 10 12 14 16 18 20 24 O.D. of Pipe In. 3-96 4.80 6.90 9-05 11.10 13-20 15-30 17-40 19-50 21.60 25.80 Wall Thick ness In. O.32 0.35 O.38 0.41 0.44 0.48 O.51 0.54 0.58 0.62 0-73 Depth "D" of Groove In. O.O78 O.O78 0.078 0.078 O.O78 0.125 0.125 0.125 0.125 0.125 0.125 Radius "R" of Groove In. 1.902 2.322 3-372 4.447 5.472 6.475 7-525 8.575 9.625 IO.675 12.775 Latch Keys or Snap Ring No. Req'd. Length "L" In. Radius "R5' In. 3 1.00 1.902 3 1-50 2.322 3 1.50 3-372 4 1.50 4.447 4 1-75 5.472 4 2.50 6-475 Snap Ring 7.525 Snap Ring 8.575 Snap Ring 9.625 Snap Ring IO.675 Snap Ring 12-775 UCASB00242904 Number VAN-JRI_______ Date August 31, 1961 Page of h INSTALLATION PROCEDURE FOR SNAP-LOCK RESTRAINED JOINTS BELL-TITS JOINT SNAP-LOCK RESTRAINED Field Assembly of Snap-Lock Joints 1. For use with. Mechanical Joint at Fittings a. Wash socket and grooved plain end with soapy water. Slip gland and gasket over plain end with small side of gasket and lip side of gland facing the socket. Paint gasket with soapy water. b. Insert grooved plain end into socket until the shallow edge of the groove is flush with the flange face of the socket. c. Push gasket into the socket with fingers. Be sure gasket is evenly seated in the socket. d. Mark off uniform spaces around socket or plain end to locate the position of the locking keys required for the joint. e. Position locking keys at the points marked in step "d" by forcing the beveled edge under the gasket. Be sure key is forced in until the vertical leg bears against the gasket. f. Slide gland into position against the locking keys. Insert bolts and tighten nuts to bear against gland. g. With ratchet wrench tighten bolts alternately (bottom, then top, and so on all around) until all bolts are uniformly drawn up. 2. For use with Bell-Tite Slip-On Joints a. Clean plain end, groove, gasket, and bell thoroughly. b. Insert gasket into position in bell. c. Position the specified number of locking keys inside the bell by forcing the upstanding legs between the flange and the gasket to hold the keys in place. Locking keys must be uniformly spaced around the joint. d. Wipe lubricant onto gasket and locking keys.. e. Force the grooved plain end into the bell until locking keys snap into the groove. Pipe length being inserted must be kept in careful alignment with bell during this operation. 3- For use of Snap Ring with Bell-Tite Pipe - Steps a, b, d, and e similar to "2" above. c. Position the snap ring inside the bell between the inside face of the flange and the gasket. Be sure 30-degree shoulder is bearing on 30-degree inside face of the bell flange. Force snap ring open by forcing between bell flange and gasket. UCASB00242905 GENERAL Type Valve Gate; split wedge(l) Type Valve Eads Screwed Press-Temp Ratings 125 psi at 500F; 200 psi at 100F Construction ` Screwed bonnet; rising stem; rising wheel; inside screw; integral seats (1) Powell - solid wedge 1/4" to 3/4" MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Bronze Bronze Bronze Bronze Asbestos: None Garlock 117 or approved equal BILLING Lunkehheirner 2125, 125 lb bronze screwed gate valve Crane 430, 125 lb brass screwed gate valve Jenkins 47, 125 lb bronze screwed gate valve Powell 500, 125 lb bronze screwed gate valve R, P. and C. 86X, 125 lb bronze screwed gate valve Williams lz50, 125 lb bronze screwed gate valve Y-i Avail Size Range Lunkenheimer: l/4"-3"; Crane: l/4"-3"; Jenkins: l/4">-3"; Powell: l/4"-3"; R. P.andC: 1/4"-3"; Williams: l/4"-3" DIMENSIONS Valve Size 1/4 3/8 1/2 3/4 A(Lunk) 1-7/8 2 2-3/16 2-1/2 A(Cra) 1-3/4 1- 13/16 2 2-1/4 A(Jenk) 1-3/4 1 -3/4 1-15/16 2-5/16 A(Pow) 1-3/4 2 2-3/16 2-7/16 A(RPC >1-11/16 1- 13/16 2-1/16 2-5/16 A(Will) B(max) C(max) 1-7/8 5 3 2 2-3/16 2-7/16 56 7 34 3 1 2-13/16 2-11/16 2-11/16 2-3/4 2-19/32 2-3/4 8 4 1-1/4 3-3/16 3 3 3 3 3-1/8 10 5 1-1/2 3-1/2 3-1/4 3-3/8 3-1/4 3-1/4 3-1/2 11 5 2 2-1/2 4-1/16 4-11/16 3-11/16 4-1/4 4 4-11/16 3-13/16 4-5/163-13/16 4-5/16 4-1/16 4-11/16 13 16 66 UCASB00242906 Type Valve Type Valve Ratings Press-Temp Rating Construction Gate; solid wedge( 1) Flanged; ASA 125 lb, plain face 125 psi at 500F(2) OS and Y; rising stem; nonrising wheel; bolted bonnet, flanged plain face; inserted Y-5 seats (1) Chapman-split wedge (2) Reduced pressure and temperature ratings in large sizes; see mfr catalog MATERIAL Bo dy - Bonn et Cast iron Seat Bronze Disk Bronze Stem Packing Bronze Asbestos: To 3'1, Garlock 117; 4" and up, or approved equals Garlock 150 Gasket Compressed asbestos: U. S. Rubber 4899 or approved equal BILLING Powell 1444, 125 lb Cl fig gate valve; bronze trim; FandD, ASA 125 lb Jenkins 651A, 125 lb Cl fig gate valve; bronze trim; FandD, ASA 125 lb Chapman List 59-1/2 Fig. 263, 125 lb Cl fig gate valve; bronze trim; FandD, ASA 125 lb O. I. C. 1140, 125 lb Cl fig gate valve; bronze trim; FandD, ASA 125 lb Lurikenheimer 1430, 125 lb Cl fig gate valve; bronze trim; FandD, ASA 125 lb Crane 465-1/2, 125 lb Cl fig gate valve; brass trim; FandD, ASA 125 lb Valworth 726F, 125 lb Cl fig gate valve; uronze trim; FandD, ASA 125 lb R. P. and C. 625, 125 lb Cl fig gate valve; bronze trim; FandD, ASA 125 lb Avail Size Range Powell: 2" - 8"; Jenkins: 2" - 24"; Chapman: 2" - 16"; O. I. C: 2" - 14"; Lunkenheimer: 2" - 24"; Crane: 2" - 12"; Walworth: 2" - 12"; R. P. and C: 2" - 24" DIMENSIONS Valve Size 2 2-1/2 3 4 6 8 10 12 14 16 18 20 24 A 7 7-1/2 8 9 10-1/2 11-1/2 13 14 15 16 17 18 20 B(max) 15 17 20 24 33 41 50 58 66 78 85 95 110 C(max) 8 8 9 10 14 15 16 18 20 24 24 28 30 UCASB00242907 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Gate; with bypass, solid wedge (1) Flanged; ASA 125 lb, plain face 125 psi at 500F; 200 psi at 100F{2) V-6 Construction OS and Y; rising stem; nonrising wheel; bolted bonnet; flanged plain face; insexted seats; bypass as shown unless otherwise ordered (1) Chapman-split wedge (2) Reduced pressure and temperature ratings in large sizes; see mfr catalog MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Cast iron Bronze Bronze Bronze Asbestos: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals Compressed asbestos: U. S. Rubber 4899 or .approved equal BILLING Powell 1793, 125 lb Cl fig gate valve; bronze trim; screwed bypass; FandD, ASA 125 lb Jenkins 651A, 125 lb Cl fig gate valve; bronze trim; screwed bypass; FandD, ASA 125 lb Chapman List 59-1/2, Fig. 263, 125 lb Cl fig gate vsdve; bronze trim; built-up bypass; FandD, ASA 125 lb O.I. C. 1140, 125 lb Cl fig gate valve; bronze trim; screwed bypass; FandD, ASA 125 lb Lunkenheimer 1430-Mod, 125 lb Cl fig gate valve; bronze trim; built-up bypass; FandD, ASA 125 lb Crane 465-1/2, 125 lb Cl fig gate valve; brass trim; fig bypass; FandD, ASA 125 lb Walworth 726F, 125 lb Cl fig gate valve; bronze trim; screwed bypass; FandD, ASA 125 lb R. P. and C. 625, 125 lb Cl fig gate valve; bronze trim; fig bypass; FandD, ASA 125 lb Avail Size Range Powell: 10" - 30"; Jenkins: 10" - 24"; Chapman: 10" - 24"; O. I. C: 10" - 16"; Lunkenheimer: 10" - 24"; Crane: 10" - 48"; Walworth: 10" - 24"; R.P. and C: 10" - 24" DIMENSIONS Valve ~ " Size 10 12 14 16 18 20 24 30 A 13 14 15 16 17 18 20 30 B(max) 51 58 68 78 85 95 110 132 C(max) 20 20 22 22 26 24 30 36 X(max) 18 23 24 28 29 30 36 Y(max) 2 2 2 3 3 34 39 4 UCASB00242908 OiSiNJliKAJ-. Type Valve Type Valve Ends Press-Temp Ratings Construction Gate; split vhidge Flanged, plain face 150 psi at 500F; 225 psi at 100F Screwed bonnet; rising stem; rising wheel; inside screw; integral seats MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Bronze Bronze Bronze Bronze Asbestos: Garlock 117 or approved equal Compressed asbestos: U. S. Rubber No. 4899 or approved equal BILLING L,nr>Tff>nliaimer 2152, 150 lb bronze fig gate valve; FandD, ASA B16. 24, 150 lb Avail Size Range Lunkenheimer: 1/2" - 3n DIMENSIONS Valve Size_______1/2___________ 3/4 A 3-1/16 3-1/2 B6 7 C3 3 1 1 1/2_______________________ - 3-13/16 4-7/8 8 11 45 2 5-5/8 13 6 2-1/2 6-3/4 16 6 3 7-1/2 18 6 UCASB00242909 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Gate; solid wedge Flanged, ASA 300 1b, raised face 300 psi at 850F; 720 psi at 100F OS and Y; rising stem; nonrising wheel; bolted bonnet, MandF flanged; inserted seats V-23' V-23.A (ALUMINUM PAINT IS PROHIBITED) MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Carbon steel 11-1/2-13% chrome steel 11-1/2-13% chrome steel 11-1/2-13% chrome steel V-23, Asbestos: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals V-23A, Teflon, chevron type or approved equal V-23, Compressed asbestos: U. S. Rubber 4899 or approved equal V-23A, "Flexitallic" Style R or Style CG Type 304 stainless steel winding with Teflon filler or approved equal, alternate to 4", Akron metallic Type C or PM Arm co iron BILLING? 1) Powell 3003 FE, 300 lb CS(P-200) fig gate valve; P-140 trim; FandD, ASA 300 lb Chapman List 300, 300 lb CS(ASTM A216, WCB) fig gate valve; F-6 trim; FandD, ASA 300 lb Walworth 5206F, 300 lb CS(W4Z1) fig gate valve; W551 trim; FandD, ASA 300 lb R-P.andC- 3001, 300 lb CS(ASTM A2l6,WCB) fig gate valve; F-6 trim; FandD, ASA 300 lb Lunkenheimer 1938 B2, 300 lb CS fig gate valve; No. 2 trim; FandD, ASA 300 lb O. I. C. 3002-C, 300 lb CS?ASTM A2l6,WCB) fig gate valve; F-6 trim; FandD, ASA 300 Uf Vogt 8078-84, 300 lb FS(ASTM A105, G2) fig gate valve; Stellite seats, F-6 disk and stem; FandD, ASA 300 lb (1) For V-23A, billing phrase will include "Teflon packing, chevron type ox approved equal; bonnet gasket to be. . . "(complete phrase as listed under gasket V-23A above.) Avail Size Range Powell: lM-30"; Chapman: l-l/2M-30"; Walworth: 2"-24" R.P.andC: l-l/Z"-24"; Lunkenheimer: l-l/2"-24,,,; O. I. G: l-l/2"-14"; Vogt: 2-8" DIMENSIONS Valve Size A B(max) C(max) 1 1-1/4 1-1/2 2 2-1/2 3 6-1/2 7 7-1/2 8-1/2 9-1/2 11-1/8 12 13 18 22 23 25 66 8 8 10 12 46 8 10 12 12 15-7/8 16-1/218 19-3/4 30 41 49 59 68 12 16 20 24 24 ~~ 14 16 18 30 33 36 76 84 93 27 28 34 UCASB00242910 ^wJ JU-*a. vj~* XJ_I Type Valve Gate; solid wedge Type Valve E nds Flanged; ASA 600 lb, rhised. face press-Temp Ratings 600 psi at 850F; 1440 psi at 100"F Construction OSandY; rising- stem; nonrising wheel; J bolted bonnet, MandF flanged; inserted seats (ALUMINUM PAINT IS PROHIBITED) V-27 c--i -MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Carbon steel Stellite Stellite 11 -1/2-13% Chrome steel Asbestos: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals "Flexitallic" Style R, Type 304 stainless steel with asbestos filler or approved equal BILLING Chapman List 600, 600 lb CS(ASTM A216, WCB) fig gate valve; Stellite seats and disk; F-6 stem; gasket (as specified above under Material); FandD, ASA 600 lb Powell 6003FE, 600 lb CS(P-200) fig gate valve; P-100 seat and disk; P-140 stem; gasket (as specified above under Material); FandD, ASA 600 lb Walworth 5232-HF, 600 lb CS(W421) fig gate valve; Stellite seat and disk; W551 stem; gasket (as specified above under Material); FandD, ASA 600 lb R. P-andC. 6001, 600 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat and disk; F-6 stem; gasket (as specified above under Material); FandD, ASA 600 lb Vogt Similar to No. 11403-12, 600 lb FS(ASTM A105, Gl) fig gate valve; Stellite seat and disk; F-6 stem; gasket (as specified above under Material); FandD, ASA 600 lb O.I. C. 6002U, 600 lb CS(ASTM A216,WCB) fig gate valve; Stellite seat and disk; F-6 stem; gasket (as specified above under Material); FandD, ASA 600 lb Edward 611, 600 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat and disk; Evelloy stem; gasket (as specified above under Material); FandD, ASA 600 lb Avail Size Range Chapman: l"-24"; Powell: l/2M-24''; Walworth: l-l/2,r-18M; R.P.andC: l-l/2"-24"; Vogt: l/2"-6"; O. I. C: 2"-14"; Edward: 2-l/2"-12" DIMENSIONS Valve Size AB(max) C(max) 1/2 6-1/2 12 5 3/4 7-1/2 14 6 1 8-1/2 16 8 1-1/4 9 19 8 1-1/2 9-1/2 19 8 2 2-1/2 11-1/2 13 21 24 9 12 3 4 6 8 10 12 14 14 17 22- 26 31 33 35 27 33 47 53 66 73 81 15 18 22 24 28 30 36 UCASB00242911 uLJN.fc;.RAJL, Type Valve Type Valve Ends Press-Temp Ratings Construction Gate; solid wedge Flanged; ASA 600 lb, raised face 600 psi at 850F; 1440 psi at 100F OSandY; rising stem; nonrising wheel; bolted bonnet, MandF flanged(l); inserted seats; bypass as shown unless otherwise ordered (1) Powell and Walworth use TandG face (ALUMINUM PAINT IS PROHIBITED) MATERIAL V - 28 Body-Bonnet Carbon steel Seat Stellite Disk Stellite Stem 11-1/2-13% Chrome steel Packing Asbestos: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals Gasket "Flexitallic" Style R, Type 304 stainless steel with BILLING asbestos filler or approved equal Chapman List 600, 600 lb GS(ASTM A216, WCB fig gate valve; Stellite seat and disk, F-6 stem; welded bypass; gasket (as specified above under Material); FandD, ASA 600 lb Powell 6013FE, 600 lb GS(P-200) fig gate valve; P-100 seat and disk, P-140 stem; welded bypass; gasket (as specified above under Material); FandD, ASA 600 lb Walworth 5233F, 600 lb CS(W421) fig gate valve; Stellite seat and disk, W551 stem; screwed bypass; gasket (as specified above under Material); FandD, ASA 600 lb R. P. andC- 6003, 600 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat and disk, F-6 stem; welded bypass; gasket (as specified above under Material); FandD, ASA 600 lb O- I C. 6002-UJ, 600 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat and disk, F-6 stem; welded bypass; gasket (as specified above under Material); FandD, ASA 600 lb Edward 611, 600 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat and disk; Evalloy stem; welded bypass; gasket (as specified above under Material); FandD, ASA 600 lb Avail Size Range Chapman: 4"-24"; Crane: 4"-24"; Powell: 6"-24"; Walworth: 6"-18"; RPandC: 4"-24"; Lunkenheimer: 6"-24"; OIC: 4"~14"; Edward; 4"-12 DIMENSIONS Valve Size A B(max) C(max) X(max) Y(max) 4 17 32 18 21 1/2 6 22 48 22 25 3/4 8 26 54 24 26 3/4 10 31 66 28 31 1 12 14 33 35 74 81 32 36 32 35 1 1-1/4 16 39 93 38 37 1-1/4 18 43 97 3L 38 1-1/2 20 47 113 42 42 1-1/2 24 55 126 42 47 2 U CAS B00242912 GENERAL Type Valve Type Valve Ends Press-Ternr> Ratings Gate; solid wedge Flanged;.ASA 150 lb, raised face 150 psi at 500ftF; 275 psi at 100F Construction OSandY; rising stem; nonrising wheel; bolted bonnet, flanged plain face; inserted seats (ALUMINUM PAINT IS PROHIBITED) V*59, V-59 A MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket (1) Vogt-Stellite Carbon steel 11-1/2-13% Chrome steel (I) 11-1/2-13% Chrome steel 1 1 -1/2-13% Chrome steel V-59: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals V-59A; Teflon, Chevron type or approved equal V-59: U.S. Rubber 4899 or approved equal V-59A: "Flexitallic" Style R special or Style CG special. Type 304 stainless steel with Teflon filler; alternate for 1/2" to 4"; Akron metallic Type C or PM Armco iron BILLING(2) Powell 1503 FE, 150 lb CS(P-200) fig gate valve; P-140 trim; FandD, ASA 150 lb Chapman List 150, 150 lb CS(ASTM A216, CB) fig gate valve; F-6 trim; FandD, ASA 150 lb Crane 47X, 150 lb CS(ASTM A216, WCB) fig gate valve; FandD, ASA 150 lb Vogt 6068-74, 150 lb FS(ASTM A105, Gl) fig gate valve; Stellite seat, F-6 stem and disk; FandD, ASA 150 lb Lunk 1751-B2, 150 lb CS flg gate valve; FandD, ASA 150 lb Walworth 5202F, I50Tb CS(W421) fig gate valve; W551 trim; FandD, ASA 150 lb R. P, andC. 1501, 150 lb CS(ASTM A216, WCB) flg gate valve; F-6 trim; FandD, ASA 150 lb O.I.C. 15020,150 lb CS(ASTM A216, WCB) flg gate valve; F-6 trim; FandD, ASA 150 lb (2) For V-59A, billing phrase will include "Teflon packing. Chevron type or approved equal; bonnet gasket to be (complete phrase as listed under gasket V-59A above) Avail Size Range Powell: 3/4"-30r?j Chapman: l"-24"; Crane: 2"-24u; Vogt: 2"-48"; Lunkenheimer: 2"-24"! Walworth: 2"-24"; RPandG: 2"-24"j OIC: 1-1/21'-16' DIMENSIONS Valve Size3/4 A B(max) Cimax) 1 4-5/8 5 9 12 46 1-1/4 5-1/2 11 5 1-1/2 6-1/2 13 6 2 7 18 8 2-1/2 3 4 68 10 7-1/2 8 9 10-1/2 11-1/2 13 19 21 26 8 10 AD 36 14 44 53 16 18 12 14 14 15 61 71 20 24 UCASB00242913 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIA L Body-Bonnet Seat Disk Stem Packing Gasket Globe Flanged; ASA 125 lb, plain face 125 psi at 450F; 200 psi at 100F OSandY; rising stem; rising wheel; bolted bonnet, flanged plain face; inserted seats Y-102 -A- Cast iron Bronze Bronze Bronze Asbestos: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals Compressed Asbestos: U. S. Rubber 4899 or approved equal BILLING Lunk 1123, 125 lb Cl fig globe valve; bronze trim; FandD, ASA 125 lb Jenkins 613, 125 lb Cl fig globe valve; bronze trim; FandD, ASA 125 lb Powell 241, 125 lb Cl fig globe valve* bronze trim; FandD, ASA 125 lb O. I. C. 116, 125 lb Cl fig globe valve; bronze trim; FandD, ASA 125 lb Avail Size Range Lunkenheimer: 2l,-14,,; Jenkins: 2,I-6,,; Powell: 2,,-8,, O. I. C: 2-12" DIMENSIONS Valve Size A B(max) Cfmaxl 2 8 13 8 2-1/2 8-1/2 14 8 3 9-1/2 16 9 4 11-1/2 19 10 6 8 10 12 14 19-1/2 24-1/4 27-1/2 22 25 28 32 12 18 20 22 14 32 37 26 U CAS B00242914 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Globe Screwed 150 psi at 450'F; 225 psi at lOO^F Screwed union bonnet; rising stem; rising wheel; inside screw; inserted seats V -104 Cast iron Nickel allov Nickel alloy Bronze Asbestos: Garlock 117 or approved equal Compressed Asbestos: U. S. Rubber 4899 or approved equal BILLING Limk 1021, 150 lb Cl screwed globe valve; (NT4) nickel alloy seat and disk; bronze stem Jenkins 890, 150 lb Cl screwed globe valve; nickel alloy seat and disk; bronze stem Powell 190, 150 lb Cl screwed globe valve; nickel alloy seat and disk; bronze stem Avail Size Range Lunkenheimer: l/4,,-3"; Jenkins: 3/8,,-2,,; Powell: l/4,,-311 DIMENSIONS Valve Size 1/4 A(Lunk) 2-9/16 A{ Jenkins} A(Powell) B(max) C(max) 2-1/4 5 3 3/8 2-11/16 2-5/8 2-1/2 5 3 1/2 3 3 2-15/16 6 3 3/4 3-9/16 3-5/8 3-1/2 7 4 1 4-1/8 4-1/8 4-1/8 8 5 1-1/4 4-3/4 4-5/8 4-5/8 9 5 1-1/2 5-1/4 5-1/4 5-3/8 9 6 2 6-1/4 6-5/16 6-1/4 11 6 UCASB00242915 GENERAL Type Valve 'Type Valve Ends Press-Temp Ratings Construction Globe Screwed 200 psi at 500'F; 400 psi at 100'F Screwed union bonnets rising stem; rising wheel; inside screw; integral seats Body-Bonnet Seat Disk Stem Packing Gasket Bronze Bronze Bronze Bronze Asbestos: Garlock 117 or approved equal Compressed Asbestos: U. S. Rubber 4899 or approved equal BILLING Crane 70, Dwg A-11556, 200 lb brass screwed globe valve Jenkins 750, 200 lb bronze screwed globe valve Lunk 407, 200 lb bronze screwed globe valve Powell 110, 200 lb bronze screwed globe valve Walworth 160, 200 lb bronze screwed globe valve R. P. andC. 409, 2 00 lb bronze screwed globe valve O.I. C. 270, 200 lb bronze screwed globe valve Avail Size Range Crane: l/8,,-3,,; Jenkins: l/8,,-3'1; Lunkehheimer: l/8,,-3"; Powell: 1/8"-3"; Walworth: l/4,,-3"; R. P.andC: l/8"-3"; O. I. C: l/8"-3" DIMENSIONS Valve Size 1/4 A(Crane) 1-11/16 A(Jenkins) 1-3/4 A(Lunk) 1-1/32 A{ Powell) 2 A(Walw) 1-15/16 A(R.P. C. ) 1-7/8 A(O.I.C.) 1-5/8 B(max) C(ifiax) 5 3 3/8 ......m.... 3/4 1 1-15/16 2-1/4 2-3/4 3-5/16 2 2-1/4 2-7/8 3-9/32 2-1/8 2-7/16 2-15/16 3-11/32 2-1/8 2-1/2 2-7/8 3-3/8 2-1/16 2-7/16 2-3/4 3-7/16 2-1/8 2-7/16 2-15/16 3-11/32 1-15/16 2-1/4 2-3/4 3-5/16 56 77 33 4B 1-1/4 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 3-7/8 8 5 1-1/2 2 4-1/2 5-1/4 4-7/16 5-3/8 4-5/16 5-1/4 4-3/8 5-1/4 4-3/16 5 4-5/16 5-1/4 4-1/2 5-1/4 9 10 66 2-1/2 1-5/ie 6-5/16 6-7/16 6-1/2 6 6-7/16 6-3/8 11 7 UCASB00242916 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Globe Screwed 1000 psi at 450F; 4000 psi at 100F Screwed bonnet; rising stem; rising wheel; inside screw; integral seats MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Carbon steel Carbon steel Type 304 stainless steel Type 304 stainless steel V-115, Garlock 166 or approved equal V-115A, Teflon or approved equal V-115, Soft iron or approved equal V-115A, J,Flexitallicn Style R, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt No. 9871-78, 4000 lb FS(ASTM A105,G2) screwed globe valve; F-8 disk and stem; gasket and packing (as specified above under Material); tee handle Avail Size Range Vogt: l/4"-2-'' DIMENSIONS Valve Size 1/43/8 1/2 3/4 1 1-1/4 1-1/2 A (Vogt) 2-1/8 2-3/8 2-3/4 3-3/8 4 4-3/4 5-1/2 B (max) 4 5 6 7 8 9 10 . C (max) 3 3 4 4 56 7 2 6-1/4 12 8 UCASB00242917 general Type Valve Type Valve Ends Press-Temp Ratings Construction Globe Flanged; ASA 600 lb, raised face 600 psi at 850F; 1440 psi at 100F OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged(l); inserted seats (1) Han, Pow, Chap - TandG (ALUMINUM PAINT IS PROHIBITED} V -124 MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket (2) Edward - Stellite Carbon steel 11-1/2-13% Chrome steel(2) 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel Asbestos: To 3", Garlock 117; 4" and up, Garlock 1700 or approved equals "Flexitallic" Style R, Type 304 stainless steel winding with asbestos filler BILLING Edward Fig 428, l/Z"-2"; Fig 618, 2-l/2"-6"; 600 1b, CS(ASTM A216, WCB) fig globe valve; Stellite seat; Evalloy disk and stem; gasket and packing (as specified above under Material); FandD, ASA 600 lb Hancock Type 5630F, 600 lb CS(ASTM A216, WCB) fig globe valve; F-6 trim; gasket and packing (as specified above under Material); FandD, ASA 600 lb R. P, andC 6011, 600 lb CS(ASTM A216, WCB) fig globe valve; F-6 trim; gasket and packing (as specified above under Material)-; FandD, ASA 600 lb Powell 6031 FE, 600 lb CS(P-200) fig globe valve; P-140 trim; gasket and packing (as specified above under Material); FandD, ASA 600 lb Chapman List 603, 600 lb CS(ASTM A216, WCB) fig globe valve; F-6 trim; gasket and packing (as specified above under Material); FandD, ASA 600 lb Avail Size Range Edward: l/2"-6"; Hancock: 2-l/2,'-6"; R.P.andC: 1-1/2M-8M; Powell: l/2,,-12,r; Chapman: l-l/2l,-8" DIMENSIONS Valve Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12 A 6-1/2 7-1/2 8-1/2 9 9-1/2 11-1/2 13 14 17 22 26 31 33 B(max) 9 10 10 14 17 21 22 25 29 44 53 52 60 C(max) 5 6 7 9 9 12 15 15 18 26 36 30 36 UCASB00242918 GENERAL. Type Valve Globe Type Valve Ends Flanged; ASA 300 lb, raised face Press-Temp Ratings 300 psi at 850F; 720 psi at 100F Construction OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged; inserted seats (ALUMINUM PAINT IS PROHIBITED) Y-134, Y-134 A MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Carbon steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-134, Asbestos: To 3n, Garlock 117; 4U and up, Garlock t50 or approved equals V-134A, Teflon, Chevron type or approved equal V-134, Compressed Asbestos: U. S. Rubber 4899 or approved equal V-134A, ''Flexitallic" Style R or Style CG, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Powell 3031 FE, 300 lb CS(P-200) fig globe valve; P-140 trim; FandD, ASA 300 lb (8" and up, with anti-friction bearing yoke) Chapman List 300-A, 300 lb CS(ASTM A216, WCB) fig globe valve; F-6 trim; FandD, ASA 300 lb Edward 6518, 300 lb CS(ASTM A216-, WCB) fig globe valve; Evalloy trim; FandD, ASA 300 lb (10u and up, Lmpactor handwheel) Jenkins 1042-G, 300 lb CS(AS.TM A217, WCB) fig globe valve; F-6 trim; FandD, ASA 300 lb Lunk 1600-B2, 300 lb CS fig globe valve; No. 2 trim; FandD, ASA 300 lb Walworth 528IF, 300 lb CS(W421) fig globe valve; W551 trim; FandD, ASA 300 lb R.P.andC. 3011, 300 lb CS(ASTM A216, WCB) fig globe valve; F-6 trim; FandD, ASA 300 lb AvaU Size Range Powell: 1"-12"; Chapman: 2"-l0"; Edward: 2-l/2"-l6r'; Jenkins: 2"-10"; Walworth: 2"-8"; R. P. andC: 2"-12" ; Lunkenheimer: 2"-8" DIMENSIONS Valve Size A B(max) C(max) 1 8-1/2 10 6 1-1/4 9 13 7 1-1/2 9-1/2 13 7 i 2 10-1/2 20 10 2-1/2 11-1/2 21 12 3 12-1/2 24 12 4 14 27 15 6 17-1/2 ' 34 22 8 10 22 24-1/2 47 49 30 30 UCASB00242919 GENERAL Type Valve Type Valve Ends Globe Flanged; ASA 150 lb, raised face Press-Temp Ratings 150 psi at 500F; 275 psi at 100F Construction OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged; inserted seats (ALUMINUM PAINT IS PROHIBITED) V-143/ V- v* G z Tl 3 oOu D i Ir --q 1J L - MATERIAL Body-Bonnet Carbon steel Seat 11-1/2-1 3% Chrome steel Disk 11-1/2-13% Chrome steel Stem 11-1/2-13% Chrome steel Packing V-143, Asbestos: To 3", Garlock 117; 4*' and up, G Gar lock 150 or approved equals V-143A, Teflon, Chevron type or approved equal Gasket V-143, Compressed Asbestos: U. S. Rubber 4899 or approved equal V-143A, "Flexitallic" Style R, Type 304 stainless 3teel with Teflon filler BILLING Powell 1531 FE, 150 lb CS(P-200) fig globe valve; P--140 trim; gasket and packing (as specified above under Material); FandD, ASA 150 lb Crane 143X, 150 lb CS(ASTM A216, WCB)flg globe valve; Exelloy trim; gasket and packing (as specified above under Material); FandD, ASA 150 lb Jenkins 1040C, 150 lb CS(ASTM A216, WCB) fig globe valve; gasket and packing (as specified above under Material); FandD, ASA 150 lb Lunk 1755-B2, 150 lb CS fig globe valve; No. 2 trim;; gasket and packing (as specified above under Material); FandD, ASA 150 lb Walworth 5275F, 150 lb CS(W421) fig globe valve; W551 trim; gasket and packing (as specified above under Material); FandD, ASA 150 lb R.P.andC. 1511, 150 lb CS(ASTM A2l6, WCB) fig globe valve; F-6 trim; gasket and packing (as specified above under Material); FandD, AlSA 150 lb O. I- C. 1542, 150 lb CS(ASTM A216, WCB) fig globe valve; F-6 trim; gasket and packing (as specified above under Material); FandD, ASA 150 lb Pacific 160-1, 150 lb CS(ASTM A2l6,WCB) fig globe valve; F-6 trim;.FandD, ASA 150 lb Avail Size Range Powell: 3/4n-12"; Crane: 2>'-8n; Jenkins; 2'>-8n; Lunkenheimer: 2n-6n; Walworth: 2"-8"; R.P.andC. : 2"-8"; 0.1. C.: 2"-8"; Pacific: l-l/2"-i2" DIMENSIONS Valve Size A 3/4 1 1-1/4 1-1/2 2 2-1/2 3_________4- 6 4-5/8 5 5-1/ 2 6-1/2 rTT7r~9ll7T~lL. 1 /2 16 B(max) 8 99 C(max) 445 13 15. 16 7 89 19 10 21 26 12 16 8 10 19-1/2 24-1/2 31 45 18 20 12 27-1/2 49 22 UCASB00242920 general Type Valve Type Valve Ends Press-Temp Ratings C on stru ction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Globe Flanged: ASA 150 lb, plain face 150 psi at 5'00F; 225 psi at 150F OSandY; rising 3tem; rising wheel; bolted bonnet, MandF flanged; inserted seats V -163 iTTXr Bronze Ni-Bronze Ni-Bronze Bronze Asbestos: To 3'*, Garlock 117; 4" and up, Garlock 150 or approved equals Compressed Asbestos: U*S. Rubber 4899 or approved equal BILLING Powell 1218, 150 lb bronze fig globe valve; nickel bronze seat and disk; bronze stem; FandD, ASA B16. 24, 150 lb Avail Size Range Powell: l-l/4,,-6" DIMENSIONS Valve Size A B C 1-1/4 6 9 5 1-1/2 6-1/2 9 5 2 7-1/2 10 6 2-1/2 8-1/4 12 7 3 9-1/2 13 8 46 10 12-3/4 16 20 10 12 UCASB00242921 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Globe Screwed 300 psi at 750F; 600 psi at 100F Screwed union bonnet; rising stem; rising wheel; inside screw; inserted seats V -171 Forged steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel Asbestos: Garlock 117 or approved equal Compressed Asbestos: U. S. Rubber 4899 or approved equal BILLING Vogt 851-58, 300 lb FS(ASTM A105, G2) screwed globe valve; Stellite seat; F-6 disk and stem Avail Size Range Vogt: l/4ll-2,, DIMENSIONS Valve Size________________1/4 A 2-3/8 B6 C4 3/8 2-3/8 6 4 1/2 2-3/4 6 4 3/4 3-3/8 8 5 1 4 9 6 1-1/4 5-1/2 12 7 1-1/2 5-1/2 12 7 2 6-1/4 13 8 UCASB00242922 general Type Valve Type Valve Ends Press-Temp Ratings Construction Swing Check, horizontal and vertical upward Screwed 125 psi at 353F; 200 psi at 100F Screwed cap; integral seat V -201 X . ~b X, )-- -< >-- --------A--------- MATERIAL Body Seat Disk Hinge Pin Gasket Bronze Bronze Bronze Bronze Bronze Rubber: US Rubber 4009 Rainbow BILLING Crane 34, 125 lb brass screwed swing check valve Chapman List 20 Fig. 64, 150 lb bronze screwed swing check valve Jenkins 92, 125 lb bronze screwed swing check valve Powell 578, 125 lb bronze screwed swing check valve Walworth 406, 125 lb bronze screwed swing check valve R. P. andC. 198, 125 lb bronze screwed swing check valve O. I, C. 134, 125 lb bronze screwed swing check valve Stockham B319, 125 lb bronze screwed swing check valve Avail Size Range Crane: 3/8,,-3n; Chapman: l/4"-3o; Jenkins: l/4''-3"; Walworth: l/4,,-3"; R. P.andC: 1 /4"-3M; O. I. C: 1/8"-3"; Stockham: l/4"-3" DIMENSIONS Valve Size______ A(Crane) A(Chap) A{Jehk) A(Pow) A(Wal) A(RPC) A{OlC) A(Stock) B(Max) 1/2 2-1/4 2-1/2 2-3/8 2-3/4 2-3/4 2-1/2 2-7/16 2-7/16 3 3/4 2-11/16 3 2-13/16 2-7/8 3-1/8 2-7/8 2-3/4 2-13/16 3 1 3-3/16 3-3/8 3-5/16 3-1/4 3-9/16 3-3/8 3-1/8 3-3/16 4 1-1/4 3-11/16 3-7/8 3-13/16 3-3/4 4-5/16 3-13/16 3-5/8 3-3/4 4 1-1/2 4-1/4 4-1/4 4-1/4 4-1/4 4-3/4 4-3/16 4-1/8 4-3/16 5 2 5-1/8 5-1/8 5-1/4 5-1/4 5-1/2 5-1/2 4-11/16 5-1/8 5 UCASB00242923 GENERAL* Type Valve Swing check, horizontal and vertical upward Type Valve Ends Flanged; ASA 150 lb, raised face Press-Temp Ratings 150 psi at 500F; 230 psi at 100F C on s tr notion Bolted cap; MandF flanged, inserted seat {ALUMINUM PAINT IS PROHIBITED) V-203, V-203 A MATERIAL Body Seat Disk Hinge Pin Gasket Carbon steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-203, US Rubber 4899 or approved equal V-203A, "Flexitallic" Style R or CG, Type 304 stainless steel with Teflon filler or approved equal BILLING Powell 1561A-FE 150 lb CS(P-200) fig swing check valve; P-140 trim; FandD, ASA 1 50 lb Crane 147X, 150 lb CSfASTM A216, WCB) fig swing check valve; Exelloy trim; FandD, ASA 150 lb Jenkins 1025, 150 lb CS(ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 150 lb Lunk 1759-B2, 150 lb CS fig swing check valve; F-6 trim; FandD, ASA 150 lb Walworth 5341F, 150 lb CS(W421) fig swing check valve; W551 trim; FandD, ASA 150 lb R. P. andC. 1531, 150 1b CS(ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 1 50 lb O. L C. 1572-C, 150 lb CS(ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 150 lb Chapman List 151-A 150 lb CS {ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 150 lb Avail Size Range Powell: 1/2M-16"; Crane: 2"-12"; Jenkins: 2"-12"; Lumkenheimer: 2"-10"; Walworth: 2"-8"; R. P.andC: 1 -1/2"-8"; O. I. C: 2-10"; Chapman: 2"-4,t DIMENSIONS Valve Size1/2 A B(Max) 4-1/4 3 3/4 1 I-I/4 1-1/2 2 2-1/2 34 4-5/8 5 5-1/2 6-1/2 8 8-1/2 9-1/2 11-1/2 444 677 8 -9 68 10 14 19-1/2 24-1/2 12 15 16 UCASB00242924 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Swing check, horizontal and vertical upwar d Flanged; ASA 125 lb, plain face 125 psi at 450'F; 200 psi at 1006F(1) V-204 rflh. $ 13 Construction Bolted cap, flanged plain face; inserted seat K-------;--A P ------ (1) Reduced pressure and temperature ratings in large sizes; see manufacturer's catalog MATERIAL Body Seat Disk Hinge Pin Gasket Cast iron Bronze Bronze Bronze Bronze Compressed Asbestos: equal US Rubber 4899 or approved BILLING Crane 373, 125 lb Cl fig swing check valve; brass trim; FandD, ASA 125 lb Jenkins 624, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb Lunk 1790, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb Powell 559, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb 0,1. C. 124, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb Walworth 928F, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb R. P. andC. 216, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb Stockham G-931, 125 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb Avail Size Range Crane: 2n-24"; Jenkins: 2,!-12"; Lunkenheimer: 2"-12"; Powell: 2"-18"; O. I. C: 2"-14"; Walworth: 2"-14"; R. P.andC: 2"-6"; Stockham: 2"-6" DIMENSIONS Valve Size_______ 2 A8 B(Max) 6 2-1/2_________3_ 8-1/2 9-1/2 77 4________6__________8 .___________10 11-1/2 14 19-1/2 24-1/2 9 10 14 15 12 27-1/2 17 UCASB00242925 GENERAL, Type Valve Type Valve Ends Press-Temp Ratings Construction Swing check, horizontal and vertical upward Screwed 200 psi at 500F; 400 psi at 100F Screwed cap; integral seat Y-210 MATERIAL Body Seat Disk Hinge Pin Gasket Bronze Bronze Bronze Bronze Bronze Compressed Asbestos: equal US Rubber 4899 or approved BILLING Lunk 554, 200 lb bronze screwed swing check valve Jenkins 762A,2Q0 lb bronze screwed swing check valve Powell 560, 200 lb bronze screwed swing check valve Walworth 420, 200 lb bronze screwed swing check valve O. I. C. 236, 200 lb bronze screwed swing check valve Williams 254, 200 lb bronze screwed swing check valve Avail Size Range Lunkenheimer: 1 /4*'-3,J; Jenkins: l/4"-3"; Powell: l/8,'-3"; O. I. C: l/8"-3; Williams: l/4"-3 DIMENSIONS Valve Size 1/2 A{Lunk) 2-9/16 A(Jenk) 2-1/2 A(Pow) 2-3/4 A(Walw) 2-3/4 A(O.I.C. ) 2-11/16 B(Max) 2 3/4 3 2-15/16 3 3-3/16 3-3/16 3 1 3-17/32 3-7/16 3-3/8 3-5/8 3-11/16 3 1-1/4 3-15/16 3-15/16 4 4-5/16 4-1/8 3 1-1/2 4-3/8 4-3/8 4-1/2 4-3/4 4-11/16 4 2 5-3/8 5-3/8 5-1/2 5-5/8 5-1/2 4 UCASB00242926 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Y-211, Y-211 A Swing check, horizontal and vertical upward Flanged; ASA 300 lb, reused face 300 psi at 750F; 500 psi at 100F Bolted cap, MandF flanged; inserted seat (ALUMINUM PAINT IS PROHIBITED) MATERIAL Body Seat Disk Hinge Pin Gasket BILLING Carbon steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1 /2-13% Chrome steel V-211, Compressed Asbestos: US Rubber 4899 or approved equal V-211A, "Flexitallic" Style R or CJ, Type 304 stainless steel winding with Teflon filler or approved equal Powell 3061 F.E, , 300 lb CS(P-200) fig swing check valve; P-140 trim; FandD, ASA 300 lb Chapman List 301, 300 lb CS{ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 300 lb Jenkins 1Q26C, 300 lb CS(ASTM A95) fig swing check valve; F-6 trim; FandD, ASA 300 lb Lunk 1491B, 300 lb cast carbon stl fig swing check valve; 2 trim; FandD, ASA loo lb R. P. andC- 3031, 300 lb CS(ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 300 lb Walworth 5344F, 300 lb GS{W421) fLg swing check valve; W551 trim; FandD, ASA 300 lb O. I. C. 3072-C, 300 lb CS(ASTM A216, WCB) fig swing check valve; F-6 trim; FandD, ASA 300 lb Avail Size Range Powell: 1"-14"; Chapman: 2"-4"; Jenkins: 2,,-101'; Lunk: 2"-10"; R.P.andC: 2"-14"; Walworth: 2"-12";O.LC: 2-10" DIMENSIONS Valve Sizei A 8-1/2 B(Max) 5 1-1/4 9' 6 1-1/2 9-1/2 8 2 10-1/2 8 2-1/2 11-1/2 8 3 12-1/2 9 46 8 10 14 17-1/2 21 24-1/2 10 13 ' 16 --19 UCASB00242927 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction- Piston check, horizontal Screwed 600 psi at 900F; 2000 psi at 100*F Screwed cap; inserted, seat Y-217, V-217A MATERIAL Body Seat Piston Gasket BILLING Forged steel 11 -1 / 2 -13 % Chrome steel 11-1/2-13% Chrome steel V-217, US Rubber 4899 or approved equal V-217A, "Flexitallic" Style R or CG, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt No. 9091-98, 600 lb FS(ASTM A105.G1) screwed piston check valve; F-6 trim Crane 3670X, 600 lb FS(ASTM A105, Gl) screwed piston check valve; Exelloy trim Q. I. C. 2221-C, 700 lb FS(ASTM A105, G2) screwed piston check valve; F-6 trim Edward 2678, 600 lb FS(ASTM Al05, G2) screwed piston check valve; Exelloy trim Avail Size Range Vogt: l/4"-2"; Crane: l/4"-3/4"; O. I. C: l/4"-3/4"; Edward! 1/4"- 1M DIMENSIONS Valve Size 1/4 A(Vogt) 3-1/8 A( Crane) 3 A(0.1. C. )2-l/2 A(Edward) 3 B(Max) 3 3/8 3-1/8 3 3 3 3 1/2 3-5/8 3-1/2 3-1/2 3-3/4 3 3/4 4-3/8 4-1/2 4-1/2 4-1/2 4 1 5 4 1-1/4 6 1-1/2 6-3/4 45 2 8-1/4 5 UCASB00242928 GENERAL -Type Valve Swing check, horizontal and vertical upward Type Valve Ends Flanged; ASA 600 lb, raised face Press Temp Ratings 600 psi at 8bO"F; 1440 psi at 100F Construction Bolted cap, MandF flanged(l); inserted seat {1} Crane, O. I. C. - Ring-joint; Powell, Walworth - TandG (ALUMINUM PAINT IS PROHIBITED) MATERIAL BodySeat Disk Hinge Pin Gasket Carbon steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel "Flexitallic" Style R, Type 304 stainless steel with asbestos filler V -262 BILLING Chapman List 601, 600 lb CS(ASTM A216, WCB) fig awing check valve; F-6 trim; gasket (as specified above under Material); FandD, ASA 600 lb Crane 175X, 600 lb CS{ASTM A216, WCB) fig swing check valve; Exelloy trim; gasket (as specified above under Material); FandD, ASA 600 lb Jenkins 1028C, 600 lb CS(ASTM A216, WCB) fig swing check valve; Exelloy trim; gasket (as specified above under Material); FandD, ASA 600 lb Powell 6061FE, 600 lb CS(P-200) fig swing check valve; P-140 trim; gasket (as specified above under Material); FandD, ASA 600 lb Walworth 5350F, 600 lb CS(W421) fig swing check valve; W551 trim; gasket (as specified above under Material); FandD, ASA 600 lb LnnV 1495-B2, 600 lb CS(ASTM A216, WCB); fig swing check valve; F-6 trim; g'asket (as specified above under Material); FandD, ASA 600 lb R. P. andC. 6031, 600 lb CS(ASTM A216, WCB) fig swing check valve; F-6 trim; gasket (as specified above under Material}; FandD, ASA 600 lb O.I.C. 6072-C, 600 lb CS(ASTM A216, WCB)flg swing check valve; F-6 trim; gasket (as spcified above under Material); FandD, ASA 600 lb Avail Size Range Chapman; l-l/2"-12"; Crane: l-l/4"-12"; Jenkins: 2"-8"; R, P.andC: l-l/2"-8"; O-1 C: 2-12" DIMENSIONS Valve Size A B(Max) 2 .11-1/2 8 2-1/2 34 6_________8 10 12 13 14 17 22 26 31 33 10 10 12 16 18 20 22 UCASB00242929 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction' Plug; corporation 3top cock, horizontal Screwed 100 psi at 100ffF Integral seat MATERIAL Body Seat Plug Packing Gasket Brass Brass Brass Y-415 BILLING Mueller H-15025, 100 lb brass screwed corporation stop cock; iron pipe thread (Male) on the inlet side. Copper service pipe connection on outlet side, for inserting with Mueller tapping machine Avail Size Range Mueller: l/2"-2" DIMENSIONS Valve Size A IPT 1/2 4-17/64 1/2 3/4 1 4-13/16 6-3/64 3/4 1 1-1/4 6-59/64 1-1/4 1-1/2 8-13/64 1-1/2 2 9-63/64 2 U CAS B00242930 GENERAL Type Valve Plug; lubricated Type Valve Ends Flanged; ASA 150 lb, raised face Press-Temp Ratings 300 psi at 850F; 720 psi at 100*F Construction Bolted cover, MandF flanged; integral seat; wrench operated; 6" and up worm gear (ALUMINUM PAINT IS PROHIBITED) V-431 MATERIAL Body Seat Plug Stem Packing Gasket Carbon steel Carbon steel" Carbon steel Carbon steel Asbestos: To 3'*, Garlock 117; 4" and up, Garlock 150 or approved equals Compressed Asbestos: US Rubber 4899 or approved equal BILLING Walworth 1764F, l,*-*4''; 1764F, 6,,-l2,,J 300 lb CS(W421) fig lubricated plug valve; to 4" with wrench, 6'*and up, worm gear operated; assembled with__________ . lubricant; FandD, ASA 300 lb Nordstrpm 2025, l"-4"; 4289, 6"-24, 300 lb CS(ASTM A216, WCB) fig lubricated plug valve; to 4n, with wrench; 6" and up, worm gear operated; assembled with lubricant; FandD, ASA 300 lb Powell 3059, 1 ,r-4n; 3059G, 6"-12", 300 lb CS(ASTM A216, WCB) fig lubricated plug valve; To 4n, with wrench, 6" and up, worm gear operated; assembled with lubricant; FandD, ASA 300 lb Avail Size Range Walworth: 1"-12"; Nordstrom: 1 "-24"; Powell; 1"~12M DIMENSIONS Valve Size1 A B(Max) ' 1-1/2 6-1/4 7-1/2 89 2 8-1/2 11 2-1/2 3 9-1/2 11-1/8 12 13 4 68 10- 12 12 15-7/8 16-1/2 18 19-3/4 15 20 24 26 27 14 30 31 UCASB00242931 GENERAL Type Valve Type Valve Ends Gate; solid wedge(l) Flanged; MSS 150 lb, plain face V-588., V-588A Press-Temp Ratings 150 psi at 500F; 230 psi at I00F Construction OSandY; rising stem; nonriBing wheel; bolted bonnet, MandF flanged; integral seats (1) Aloyco, Crane split wedge MATERIAL Body-Bonnet Seat Disk Stem Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Packing V-588, Teflon, Cheyron ty-pe or approved equal V-588A, Pure asbestos rope or approved equal Gasket Pompressed asbestos: Garlock 7705 or approved equal Pressure-Restraining Bolts and Nuts A combination of non-galling Type 18-8 stainless steel BILLING Powell Fig 2491, 1/2'U2M incl; Fig 2453SG, 2-l/2-12", 150 1b 18-8 SMO(Type 316) fig gate valve; solid wedge disk; packing, gasket and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Aloyco 111, 150 lb 18-8 SMO(Type 316) fig gate valve; packing, gasket, and pres sure-re straining bolts and huts (aB specified above under Material); FandD, MSS SP-42 Cooper 100SW, 150 lb 18-8 SMO(Type 316) fig gate valve; packing, gasket, and pres sure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Crane 18845, 150 1b 18-8 SMO(Type 316) fig .gate'valve; packing, gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Pacific S-500, 150 lb 18-8 SMO(Type 316) fig gate valve; packing, gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Jenkins 1327, 150 lb 18-8 SMO(Type 316) fig gate valve; packing, gasket, and pres sure-re straining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: l/2"-14n; Alovco: 1/2I1-I4"; Cooper: 1/2I,-141'; Crane: l/2"-12"; Pacific: l/2"-8"; Jenkins: 1 /2'<-8u DIMENSIONS Valve Size1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6r 8 10 12 14 A 4-1/4 4-5/8 5 5-1/2 4-1/2 7 V-l/2 8~ 9 10-1/2 ll-l/2 13 14 15 B(max) 9 10 11 23 13 15 18 20 24 32 40 49 58 66 G(max) 5 5 5 6 6 77 9 11 14 16 18 20 22 UCASB00242932 GENERAL Type Yalve Type'Valve Ends Press-Temp Ratings Construction MATERIAL Body Seat Disk Stem. Packing Gasket Gage cock Screwed 200 psi at 387F Screwed union bonnet; rising stem; rising wheel; inside screw; integralseat Y-403 Bronze Bronze Bronze Bronze Asbestos: Garlock 117 or approved equal Compressed Asbestos: US Rubber 4899 or approved equal BILLING Lunk 460, 200 lb bronze screwed liquid level gage; rough body Avail Size Range Lunkenheimer: 3/8"-3/4'' DIMENSIONS Valve Size I B C D 3/8 1-13/16 5 2 1/2 1/2 2-3/32 5 2 3/4 3/4 2-11/32 5 2 1 UCASB00242933 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Gage cock Flanged; MSS 150 lb, plain face 150 psi at 400F OSandY; rising wheel; rising stem; screwed union bonnet; integral seat V-619 MATERIAL Body Seat Disk Stem Packing Gasket: Pressure-Restraining Bolts and Nuts Type 3l6 stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, Chevron type or approved equal Compressed Asbestos: Garlock 7705 or approved equal A combination of non-galling Type 18-8 stainless steel BILLING Powell Dwg D-31506, 150 lb 18-8 SMO(Type 316) SS fig liquid level gage; packing and pressure-restraining bolts (as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: l/2M-3/4" DIMENSIONS Valve Size A B C D 1 D 1/2 2-1/16 6 3 3/4 2-3/32 6 3 UCASB00242934 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body- Bonnet Seat Disk Stem Packing Gasket Gate; split wedge Flanged; ASA 150 lb, plain face 150 psi; 300 psi at 100F OSandY; rising stem; nonrising wheel; bolted bonnet, flanged pkiin face; inserted seats V-S46 Cast iron Bronze Cast iron, bronze faced Bronze Asbestos: To 3", Garlock 117; 4" and up, Garlock 150 or approved equals Rubber: XJ. S. Rubber 4009 Rainbow BILLING Mueller-Columbian A-Z073-6, 150 lb cast iron fig gate valve; bronze trim; FandD, ASA 150 lb DIMENSIONS Valve Size 2-1/2 3 4 6 8 10 12 14 A 7-1/2 8 9 10-1/2 11-1/2 13 14 15 B 16 19 25 32 41 49 56 65 C 6 8 11 13 14 16 16 18 UCASB00242935 GENERAL. Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body Seat Disk Hinge Pin Gasket Swing check, horizontal and vertical upwar d Flanged, ASA 12 5 lb, plain face CD 150 psi at 450F; 300 psi at 100F Bolted cap, flanged plain face; inserted seat V-847 h------------------ A Cast iron Bronze Cast iron, bronze faced Cast iron Bronze Rubber: US Rubber 4009 Rainbow BILLING Mueller -Columbian A-2120-6, 150 lb Cl fig swing check valve; bronze trim; FandD, ASA 125 lb Avail Size Range Mueller: 2-l/2M~14n DIMENSIONS Valve Size A B 2-1/2 9-1/8 6 3 10-3/8 6 12-7/8 7 6_______ 8_________ 10_________ 12 16-1/2 19-1/2 21-1/2 24-1/8 9 11 13 15 14 29-1/2 17 UCASB00242936 B-0PEN general Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Press-Re straining Bolts and Nuts Y Globe V-094., V-894A Flanged; MSS 150 lb, plain face 150 psi at 500oF; 230 psi at 100F OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged; integral seats Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 Btainless steel V-894, Teflon, chevron type or approved equal V-894A, Asbestos: U. S, Rubber 293 or approved equal Compressed Asbestos: Garlock 7705 or approved equal A combination of non-galling Type 18-8 stainless steel BILLING Powell l/2"-3 Fig. 2107, 4"-8" Fig. 1944; 150 lb 18-8 SMO{Type 316) SS fig Y-globe valve; packing, gasket, and pressure-restraining bolts and nuts {as specified above under Material); FandD, MSS SP-42 Aloyco 365-B, B/M 365-B 150 lb 18-8 SMO(Type 316) SS fig Y-globe valve; packing, gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Cooper 225, 150 lb 18-8 SMO(Type 316) SS fig Y-globe valve; packing, gasket, and pr essur e-res training bolts and nuts (as specified above under Material); FandD, MSS SP-42 Hasco l/2-4" Fig. H508, 6"-10" Fig. H229; 150 lb 18-8 SMO{Type 316) SS fig Y-globe valve; packing, gasket, and pressure-restraining bolts and nuts {as specified above under Material); FandD, MSS SP-42 Duriron Type J, 150 lb 18-8 SMO(Type 316) SS fig Y-globe valve; packing, gasket, and pressure-restraining bolts and nuts {as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: l/2,,-811; Aloyco: l/2M-10n; Cooper: l/2"-8"; Hasco: Durircn: l"-6" DIMENSIONS Valve Size 1/2 A 5-1/2 B(max) 8 C(max) 3 E(max) 4 3/4 J 6 6- tl 8 4* 44 1-1/4 1-1/2 7-1/4 8 11 12 55 55 2 2-1/2 9U 14 15 77 65 12-1/2 14-1/2 16 20 8 10 57 8 18-1/2 23-1/2 29 32 14 16 99 10 26-1/2 33 16 10 UCASB00242937 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction V-895 MATERIAL Body Seat Piston Gasket Pressure Restraining Bolts and Nuts Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Compressed Asbestos: Garlock 7705 or approved equal A combination of non-galling Typ^ 1 8-8stainless steel BILLING Powell 2003, 150 lb 18-8 SMO(Type 316) SS fig piston check valve; gasket and pressure-restraining bolts and nut3 (as specified above under Material); FandD, SP-42 Aloyco 551, B/M 551(V-895), 150 lb 18-8 SMO(Type 316) SS fig globe check valve; gasket and pressure-re straining bolts and nuts fas specified above under Material); FandD, MSS SP-42 Cooper 70, 150 lb 18-8 SMO(Type 316) SS fig globe check valve; gasket and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Pacific 18, 150 lb 18-8 SMO(Type 316) SS fig piston check valve; gasket and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: l/4"-3"; Aloyco: l/4,,-61'; Cooper: l/2"-6r*; Pacific: l"-2" DIMENSIONS Valve Size ^ B(max) 1/23/4 1 4-1/4 4-5/8 1 1-1/4 1-1/2 2 5-1/2 6-1/2 8 2-1/2 8-1/2 3 444566 34 6 9-1/2 11-1/2 16 6 79 UCASB00242938 GENERAL v-noo Type Valve Swing check, horizontal and vertical upward Type Valve Ends Flanged; ASA 150 lb, plain face Press-Temp Ratings 150 psi at 500F; 275 psi at 100F Construction Bolted cap/MandF flanged(l); integral seat (1) Hasco and Jenkins - Plain face MATERIAL Body Type 316 stainless steel Seat Type 316 stainless steel Disk Type 316 stainless steel Hinge Type 316 stainless steel Pin Type 316 stainless steel G.asket U.S. Rubber: Garlock 7705 or approved equal Pressure-Restraining Bolts and Nuts A combination of non-galling 18-8 stainless steel BILLING Powell, 1 /4"-2" Fig. 2342, 2-l/2"-up Fig. 2433SS, 150 lb 18-8 SMO(Type 316) fig swing check valve; gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Aloyco 371, B/M 371 150 lb 18-8 SMO(Type 316) fig swing check valve; gasket, and pres sure-restraining bolts and nuts (as specified above undei Material); FandD, MSS SP-42 'Pacific S-1100, 150 lb 18-8 SMO(Type 316) fig awing check valve; gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Cooper Fig. 2002, 150 lb 18-8 SMO[ Type 316) fig swing check valve; gasket, and pres sure-re straining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Crane 18829, 150 lb 18-8 SMO(Type 316) fig swing check valve; gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Hasco H-106, 150 lb 18-8 SMO(Type 316) fig swing check valve; gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Jenkins 1331, 150 lb 18-8 SMO(Type 316) fig swing check valve; gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: Cooper: l/2"-6"; Crane: DIMENSIONS l/4"-12"; Aloyco: 2-l/2"-6"; Hasco: 1/2"-10"; Pacific: l/2"-6"; 1"-10"; Jenkins: l/2"-8" Valve Size A B (max) 1/2 4-1/4 3 3/4 4-5/8 4 1 5 4 1-1/4 1-1/2 2 2-<1/2 3 5-1/2 6-1/2 8 8-1/2 9-1/2 5 566 7 .4 11-1/2 7 6 14 10 UCASB00242939 Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body - Bonnet Seat Disk Stem Packing Gasket Gate; split wedge Mechanical joint 175 psi at 100F Bolted bonnet, flanged plain face; nonrising stem; wheel-yard key- inside screw; inserted seats Y -1102 Gast iron Bronze Cast iron, bronze faced Bronze "C'-Ring or approved equal Rubber: U.S. Rubber 4009 Rainbow or approved equal BILLING Mueller - Columbian A-2380-20, 175 lb Cl mechanical joint gate valve; bronze trim; M0"-Ring packing MandH Fig. 67M, 200 lb Cl mechanical joint gate valve; bronze trim; "On-Ring packing Iowa F-5155, 175 lb Cl mechanical joint gate valve; bronze trim; J,0"-Ring packing Avail Size Range Mueller: 2H-12"; MandH: 2,'-12"; Iowa: 2,,-12" DIMENSIONS Valve Size A(Muel) A{MH) A(Iowa) B(max) K(max) 2 8-1/4 8 8-1/4 13 3-1/4 3 8-3/4 9-1/2 9-3/4 15 3-3/4 4 9-1/4 10 11 17 5 6 10-1/2 12-1/2 13-1/2 20 5-1/2 8 11-1/2 13 14-1/2 25 6-1/2 10 13 14 15-1/2 29 8 12 13-1/4 14-1/2 13 32 8-1/4 UCASB00242940 GENERAL. Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gate: split wedge Mechanical joint 175 psi at 100F Bolted bonnet, flanged plain face; nonrising stem; indicator post; inside screw; inserted seats V -1103 Cast iron Bronze Cast iron, bronze faced Bronze Asbestos: Garlock 150 or approved equal Rubber: U. S. Rubber 4009 Rainbow or approved equal BILLING Mueller-Columbian A-2072-20, 175 lb Cl mechanical joint gate valve; bronze trim; Garlock 150 packing; Mueller-Columbian indicator post Rig. A-20800; center line of valvebelow grade MandH Fig. 82M, 175 lb Cl mechanical joint gate valve; Garlock 150 packing; MandH indicator post Fig. 83; center line of valvebelow IOWA F-5570, 175 lb Cl mechanical joint gate valve; bronze trim; Garlock 150 packing; Iowa F-5565 indicator post; center line of valvebelow grade Avail Size Range Mueller: 4-12"; MandH: 4"-14"; Iowa: 4"'-l6" DIMENSIONS Valve Size A(Mul) A{MH) A{Iowa) B(max) K(max) 4 9-1/4 10 11 20 5 6 10-1/2 12-1/2 13-1/2 22 5-1/2 8 11-1/2 13 14-1/2 26 6-1/2 10 13 14 15-1/2 31 6-3/4 12 13-1/4 14-1/2 13 35 7 14 20 19-1/2 40 13 16 22 24 43 15 UCASB00242941 general. Type Yalve Type Valve Ends Press-Temp Ratings Construction. Globe Screwed 600 psi at 400`F; 3000 psi at 150F Screwed bonnet; rising stem; rising wheel; inside screw; integral seats V-1107 MATERIAL 3 ody-Bonnet Seat Disk Stem Packing Gasket Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, chevron type or equal Compressed Asbestos: U.S. Rubber 4899 or approved equal BILLING Powell Dwg E-18751-I-MO, 600 lb 18-8 SMO(Type 316) screwed globe valve; packing (as specified above under Material) Aloyco 40-N, Dwg D-18899-1, B/M 40-N 600 lb 18-8 SMO(Type 316) screwed globe valve; packing (as specified above under Material) Cooper 400, 4000 lb (cold) 18-8 SMO(Type 316) screwed globe valve; packing (as specified above under Material) Avail Size Range Powell: 1 /8"--1 *1; Aloyco: \ j&n-l IZU'> Cooper: l/8"-lu * DIMENSIONS Yalve Size A(Powell) A(Aloyco) A(Cooper) B(max) C(rnax) 1/8 1-7/8 2 1-5/8 4 3 1/4 1-7/8 Z 1-13/16 4 3 3/8 2-1/4 Z 2-1/16 5 3 1/2 2-5/8 2-1/2 2-3/8 5 3 3/4 3 3 6 4 1 3-1/2 3-3/4 7 5 UCASB00242942 general Type Valve Type Valve Ends Press-Temp Ratings Construction Swing check, horizontal and vertical upward Flanged; MSS 150 lb, -plain face 150 psi at 450 F Bolted cap, MandF flanged; integral seat V-1I09 MATERIAL Body Seat Disk Hinge Pin Gasket Bronze Bronze Bronze Bronze Bronze Compressed Asbestos: approved equal U.S. Rubber 4899 or BILLING Walworth 421F, 150 lb bronze fig swing check valve; FandD, ASA B16. 24, 150 lb Powell 2433, 150 lb bronze fig swing check valve; FandD, ASA 16. 24, 150 lb Crane, Special 373-1/2, 150 lb brass fig swing check valye; FandD, ASA B16. 24, 150 lb Avail Size Range Walworth: 4l,-6"; Powell: 2n-8n; Crane: 2M-12" DIMENSIONS Valve Size A B(max) " 2 2-1/2 34 68 10 12 8 8-1/2 9-1/2 11-1/2 14 19-1/2 24-1/2 27-1/2 5 5 6 7 8 11 13 14 UCASB00242943 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket BILLING Gate; solid wedge V-1117, Y-1117A, V-1117B Screwed 600 psi at 850F; 1440 psi at 100F Bolted-bonnet, Maud F flanged; rising stem; rising wheel; inside screw; inserted seats Carbon steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-1117, Garlock 117 or approved equal V-1117A, Bottom ring, Durametallic D-10; second ring, Garlock 1700; remainder of gland, Allpa* 2 or approved equal V-1117B, Teflon, chevron type or approved equal V-1117, "Flexitallic" Style R, Type 3U4 winding with asbestos filler or approved equal Y-1117A, Soft iron or approved equal V-1117B, "Flexitallic" Style R, Type 304 winding with Teflon filler or approved equal New England Valve Corp (Smith) Fig 850 modified, 600 lb FS(ASTM A105,G2) screwed gate valve; Stellite seat; F-6 disk and.stem; bonnet gasket and packing (as specified above under Material) R. P. andC F-59, 600 lb FS(ASTM A105, G2) screwed gate valve; Stellite seat; F-6 di'sk and stem; bonnet gasket and packing (as specified above under Material) Pacific Fig 695, 600 lb CS(ASTM A216, WCB) screwed gate valve; No. 2 trim; bonnet gasket and packing (as specified above under Material) Hancock 930, 600 lb FS(ASTM A105, G2) screwed gate valve; Stellite seat; F-6 disk and stem; bonnet gasket and packing (as specified above under Material) Vogt Similar to No. 12163-67, 600 lb FS(ASTM A105, G2) screwed gate valve; Stellite- seat; F-6 disk an,d stem; bonnet gasket and packing (as specified above under Material) Avail Size Rfoige N.E.V. Corp: l/2n-2,,1; R. P.andC: l/4"-2"; Pacific: l/4"-2"; ..Hancock: l/4"-2"; Vogt: l/4"-2" DIMENSIONS Valve Size A(NEV) A(RPC) A(Pacif) A(Hanc) A(Vogt) B(max) C(max) 1/4 3 3 2-3/4 3-5/16 2-3/8 7 4 3/8 3 3 2-3/4 3-5/16 2-3/8 7 4 1/2 3 3 3 3 2-3/'4 7 4 3/4 3-1/2 3-1/2 3-1/2 3-9/16 3-3/8 8 5 1 4-1/8 4-1/8 4-1/8 4-1/2 4 9 5 1-1/4 4-1/4 4-1/4 4-1/2 4-3/4 5-1/2 12 7 1-1/2 4-3/4 4-3/4 4.-3/4 4-3/4 5-1/2 12 7 2 5-1/4 5-1/4 5-1/4 5-1/8 6-1/4 14 8 UCASB00242944 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Pressure-Restraining Bolts and Nuts Glob e Flanged; ASA 150 lb, plain face 150 psi at SOO^F; 275 psi at 100F OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged; integral seats A-------- Type 316 stainless steel Type 31'6 .stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, .chevron type or approved equal Compressed Asbestos: Garlock7705 or approved equal A combination of non-galling 18-8 stainless steel BILLING Powell 2475, 150 lb 18-8 SMO(Type 316) fig globe valve; packing, gasket, and pressure-restraining bolts a,nd nuts (as specified above under Material); FandD, MSS SP-42 Aloyco 311-B, B/M 311-B 150 lb 18-8 SMO(Type 316) fig globe valve; packing, gasket, and pressure-re straining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Cooper 10, 150 lb 18-8 SMO(Type 316) fig globe valve; packing, gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Pacific S-700, 150 lb 18-8 SMO(Type 316) fig globe valve; packing, gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Hasco H-13, 150 lb 18-8 SMO(Type 316) fig globe valve; packing, gasket, and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Crane 18811, 150 lb 18-8 SMO(Type 316) fig globe valve; packing, gasket, and pres sure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: l/4"-3''; Aloyco: l/4,,-6"; Cooper: 1 /2tf--61'; Pacific: l/2"-6M; Hasco: l/2,t-4"; Crane: l/2u-6n DIMENSIONS Valve Size A B(max) C(max) 1/4 4 7 3 3/8 4 7 3 1/2 4-1/4 10 4 3/4 4-5/8 10 5 1 5 11 5 1-1/4 5-1/2 11 5 1-1/2 6-1/2 11 6 2 8 13 7 2-1/2 8-1/2 14 8 3________4 9-1/2 11-1/2 16 21 9 10 UCASB00242945 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Gate; solid wedge Flanged; 150 lb plain face 150 psi at 500F; 200 psi at 150'F OSandY; rising stem; nonrising wheel; bolted bonnet, plain face flange; integral seats V-1119 Bronze Bronze Bronze Bronze Asbestos: To 3", Garlock 117; 4n and up, Garlock 150 or approved equals Compressed Asbestos: ILS. Rubber 4899 or approved equal -BILLING Powell 1414G, 150 lb bronze fig gate valve; FandD, ASA B16.24, 150 lb Walworth 42F, 150 lb bronze fig gate valve; FandD, ASA B16. 24, 150 lb Fairbanks 0245, 150 lb bronze fig gate valve; FandD, ASA B16.24, 150 lb Avail Size Range Powell: 2I,-12'1; Walworth: 2,f-12n; Fairbanks: 3"-12" DIMENSIONS Valve Size A B(max) C(max) 2 7 14 8 2-1/2 3 4 6 8 10 7-, 1/2 8 9 10-1/2 11-1/2 13 16 19 23 32 40 48 8 9 10 14 14 16 12 14 56 18 UCASB00242946 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Gate; split wedge (1) Screwed 150 psi at 500F; 230 pai at 100F Construction OSandY; rising stem; nonrising wheel; bolted, bonnet, flanged plain face(2); integral seats (1) Jenkins - solid wedge (2) Crane, Jenkins - Mand F flanged V-1139 MATERIAL Body Bonnet Seat Disk Stem Packing Gasket Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, Chevron type or approved equal Compressed Asbestos: Garlock 7705 or approved equal BILLING Aloyco 110, 150 lb 18-8SMO{Type 3l6) screwed gate valve; split wedge disk; (packing and gasket as specified above under Material) Powell 2494, 150 lb 18-8SMO(Type 316) screwed gate valve; split wedge disk; (packing and gasket as specified above under Material) Crane 1,8844, 150 lb 18-8SMO(Type 316) screwed gate valve; split wedge disk; (packing and gasket as specified above under Material) Jenkins 1306.-A, 150 lb 18~8SMO(Type 316) screwed gate valve; solid wedge disk; (packing and gasket as specified above under Material) Avail Size Range Aloyco: l/2"-4"; Powell: l/2"-2n; Crane: l/2"-2M; Jenkins: l/2,,-2" DIMENSIONS Valve Size A(Aloy) A(Pow) A(Crane) A( J ehk) B(max) C(max) 1/2 2-3/4 3 2-5/8 2-1/4 9 4 3/4 3 3-1/2 2-7/8 2-5/8 9 4 1 3-1/2 4 3-1/4 3 10 5 1-1/4 4-1/4 4-1/2 4 3-7/16 11 5 1-1/2 4-1/2 5 4-1/4 3-3/4 13 6 2 4-3/4 5-3/4 4-1/2 4 15 7 2-1/2 5-5/8 16 7 3 6 18 8 4 6-5/8 22 LQ UCASB00242947 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Gate; split wedge Flanged and screwed; ASA 150 lb; raised face 150 psi at 400F; 275 psi at 100F OSandY; rising stem; nonrising wheel; bolted bonnet; MandF flanged integral seat V-1142 material Body Seat Disk Stem Packing Gasket Pressure-Restraining Bolts and Nut3 Type 31 6 stainless steel Type 31 6 stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, chevron type or approved equal Compressed Asbestos: Garlock 7705 or approved equal A combination of non-galling 18-8 stainless steel BILLING Powell, similar to Dwg D-38468, 150 lb 18-8 SMO(Type 316) fig gate valve; split wedge disk; packing, gasket, and pressure-restraining bolts and nuts {as specified above tinder Material); FandD, MSS SP-42 Avail Size Range Powell: 1-1/2" DIMENSIONS Valve Size A B C 1-1/2 4-1/2 8 4 UCASB00242948 general Type Valve Type Valve Ends Press-Temp Ratings Cons tr action Angle Flanged and screwed; ASA 150 lb, raised face 150 psi at 40QF; 275 psi at 100F OSandY; rising stem; rising wheel; screwed union bonnet; integral seats V-1144 MATERIAL, Body-Bonnet Seat Bisk Stem Packing Gasket Pres sur e - Restraining Bolts and Nuts Type 316 .stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, chevron type or approved equal Compressed Asbestos: Garlock 7705 or approved equal A combination of non-galling 18-8 stainless steel BILLING Powell 1" similar to E-34904-A, 1-1/2" similar to E-36371-A, 150 lb 18-8 SMO (Type 316) SS fig angle needle valve; packing and pres sure-res training bolts and nuts {as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: l"~l-l/2" DIMENSIONS Valve Size I B C D 1 2-1/2 9 4 29/32 1-1/2 2-1/2 9 4 29/32 UCASB00242949 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Cros s Flanged and screwed; ASA 150 lb, raised face 150 psi at 400F> 275 psi at 100aF OSandY; rising stem; rising wheel; screwed union bonnet; integral seats V-1145 MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Pressure-Restraining Bolts and Nuts Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Type 316 stainless steel Teflon, chevron type or approved equal Compressed Asbestos: Garlock 7705 or approved equal A combination of non-galling 18-8 stainless steel BILLING Powell, Dwg 1" similar to E-34904-A, 1-1/2" similar to E-36371-A, 150 lb 18-8 SMO(Type 316) fig, cross needle valve; packing and pressure-restraining bolts and nuts (as specified above under Material); FandD, MSS SP-42 Avail Size Range Powell: lM-l-l/2" DIMENSIONS Valve Size______________________ I B C D 1______________________________________1-1/2 2-1/2 2-1/2 99 44 1-11/13 1-11/13 UCASB00242950 GENERAL. V-1148, Y-1148A Type Valve Type Valve 'Hinds Press-Temp Ratings Gate; solid wedge Flanged; ASA 150 lb, raised face 150 psi at 500F; 275 psi at 100F Construction. OSandY; rising stem;-rising wheel; bolted bonnet, MandF flanged; integral seats(l) (1) Vogt - inserted seats (ALUMINUM PAINT IS PROHIBITED) Tj I MATERIAL. Body - Bonnet Seat Disk Stem Packing Gasket BILLING Carbon steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-1148, Garlock 117 or approved equal V-1148-A, Teflon, Cheviron type or approved equal V-1148, "Flexitallic" Style R, Type 304 stainless steel winding with asbestos filler or approved equal V-1148-A, ''Flexitallic'' Style R, Type 304 stainless steel winding with Teflon filler or approved equal Vogt Fig 353-8, Dwg F36386, 150 lb FS(ASTM A105, G2) fig gate valve; Stellite seat; F-6 disk and stem; packing and gasket (as specified above under Material); FandD, ASA 150 lb Pacific 1595-FX2, 150 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat; F-6 disk and stem; packing and gasket (as specified above under Material); FandD, ASA 150 lb New England Valve Corp (Smith) Fig 815, 150 lb CS(ASTM(A216, WCB) fig gate valve; Stellite seat; F-6 disk and stem; packing and gasket (as specified above tinder Material); FandD, ASA 150 lb R.P.andC. Fig -F-158, 150 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat; F-6 disk and stem; packing and gasket (as specified above under Material); FandD, ASA 1 50 lb Hancock No. 950F-15, 150 lb FS(ASTM A105, G2) fig gate valve; Stellite seat; F-6 disk and stem; packing and gasket (as specified above under Material); FandD, ASA 150 1b Avail Size Range Vogt: 1/2"-2"; Pacific: l/2''-2"; N. E-V. Corp: l/2"-2"; R.P.andC: 1/2"-2"; Hancock: l/2"-2" DIMENSIONS Valve Size ______________1/2____________ 3/4 A 4-1/4 4-5/8 B (max) C(max) 8 4 9 5 _1_______ 1-1/4_________1-1/2 5 5-1/2 6-1/2 10 11 13 66 6 2 7 15 8 UCASB00242951 GENERAL, Y-1749. V-1149.A Type Valve Gate; solid wedge Type Valve Ends Flanged; ASA 300 lb, raised face Rress-Temp Ratings 300 psi at 850F; 720 pgi at 100F Construction OSandY; rising stem; nonrising wheel; bolted bonnet, Mand'F flanged; integral seats( 1) (1) Vogt - inserted seats {-ALUMINUM PAINT IS PROHIBITED) MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Carbon steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-1149, Garlock 117 or approved equal V-1149-A, Teflon, Chevron type or approved equal V-1149, nFlexitallicn Style R, Type 304 stainless steel winding with asbestos filler or approved equal V-1149-A, "PlexitaE-ic'1 Style R, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt Fig 363-8, Dwg F36386, 300 lb FS(ASTM A105.G2) fig gate valve; Stellite seat, F-6 disk and stem; gasket\(as specified above under Material); FandD, ASA 300 lb Pacific 3595-FX2, 300 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat, F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb New England Valve Corp (Smith) Fig 830, 300 lb CS(ASTM A216, WCB) fig gate valve; Stellite seat, F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb R. P. andC. Fig F-308, 300 lb FS{ASTM A105, G2) fig gate valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb Hancock No. 950F-30, 300 lb (ASTM A105, G2) fig gate valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb Avail Size Range Vogt: l/2"--21s; Pacific: l/2'>-2; NEVCorp: l/2"-2"; R.P.andC: l/2"-2"; Hancock: l/2"-2" DIMENSIONS Valve Size_______________1/2 A 5-1/2 B(max) 9 C(max) 4 3/4___________1__________ 1-1/4 6 6-1/2 7 9 11 11 56 6 1 1/2 2- _________________________ ____ 7-1/2 8-1/2 12 15 78 UCASB00242952 GENERAL V-1150,7 -1150 A Type Valve Type Valye Ends Press-Temp Ratings Construction Gate; solid wedge Flanged; ASA 600 lb, raised face 600 psi at 850"F; 1440 psi at 100"F OSandY: rising stem; nonrising wheel; bolted bonnet, MandF flanged; inserted seats(l) (1) NEV, Hancock - integral seats {ALUMINUM PAINT IS PROHIBITED) MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Carbon steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-1150, Garlock 117 or approved equal V-1150-A, Teflon, Chevron type or approved equal V-1150, "Flexitallic" Style R, Type 304 stainless steel winding ynth asbestos filler or approved equal V-1150^-A, nFlexitallicn Style R, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt Fig 373-8, Dwg F36383, 600 lb FS(ASTM A105, G2) fig gate valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 600 lb Pacific 6595-FX2, 600 lb FS(ASTM A216, WCB) fig gate valve; Stellite seat, F-6 disk and stem; gasket {as specified above under Material); FandD, ASA 600 lb New England Valve Corp (Smith) Fig 860, 600 lb CS{ASTM A216, WCB) fig gate valve; Stellite seat, F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 600 lb Hancock 950F, 600 lb FS(ASTM A105, G2) fig gate valve; Stellite seat, F-6 disk and stem; gasket (as specified above under Material) FandD, ASA 600 lb R.P.andC. Fig F-608, 600 lb FS(ASTM A105, G2) fig gate valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 600 lb. Avail Size Range Vogt: l/2"-2"; Pacific; l/2"-2; N. E. V. Corp: 1/2"-2"; Hancock: R. P, andC: l/2M-2t' DIMENSIONS Valve Size 1/2 A 6-1/2 B(max) 9 C(m^ ' 1 3/4 7-1/2 9 5 1____________1-1/4 8-1/2 9 10 11 66 1 1/2 2- ___________________________ ____ 9-1/2 12 11-1/2 16 78 U CAS B00242953 GENERAL Type Valve Globe Type Valve Ends Flanged; ASA 300 lb, raised face Press-Temp Ratings 300 psi at 850F; 720 psi at lOO^F Construction OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged(l); integral seats(2) (1) Pacific - TandG flanged (2) N. E. V., Pacific - Inserted seats MATERIAL Bo dy - Bonnet Seat Disk Stem Packing Gasket Forged carbon steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-1152, Garlock 117 or approved equal V-1152-A, Teflon, Chevron type or approved equal V-1152, "Flexitallic" Style R, Type 304 stainless steel winding with asbestos filler or approved equal V-1152-A, uFlexitallicjr Style R, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt Fig. 483-88, Dwg F36373. 300 lb FS(ASTM A105, G2) fig globe valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb Pacific 3360-FX2, 300 lb (CS(ASTM A216, CB) fig globe valve; Stellite seat, F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb N.E.V., Type G83R, 300 lb FS(ASTM A105, G2) fig globe valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 300 lb Avail Size Range Vogt: l/2"-2)'; Pacific: l/2"-2"; N. E. V.: l/2-2" DIMENSIONS Valve Size A B(max) C(max) 1/2 6 7 4 3/4 7 9 5 1 8 9 6 1-1/2 9 12 7 2 10-1/2 15 8 UCASB00242954 general Type Valve Globe Type Valve Ends Flanged; ASA 600 lb, raised face Press-Temp Ratings 600 psi at SSO^F; 1440 psi at 100F .Construction OSandY; rising stem; rising wheel; bolted bonnet; MandF flanged(l); integral seats(2) {1) Pacific - TandG flanged {2) Pacific, N. E. V. ^ Inserted seats 1 V.1153, V-1153A 6"-=3 MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Forged carbon steel Stellite 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel V-1153, Garlock 117 or approved equal V-1153-A, Teflon, Chevron type or approved equal V-1153, ''Flexitallic1' Style R, Type 304 stainless steel winding with asbestos filler or approved equal V-1153-A, ''Flexitallic" Style R, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt Fig. 493-498, Dwg F36319, 600 lb FS(ASTM A105, G2) fig globe valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 600 lb Pacific 3660-FX2, 600 lb CS(ASTM A216, WCB) fig globe valve; Stellite seat; F-6 disk and stem; gasket (as specified above under Material); FandD, ASA 600 lb Hancock 5520F, 600 lb FS(ASTM A105, G2) fig globe valve; Stellite seat; F-6 disk and stein; gasket (as specified above under Material); FandD, ASA 600 lb N.E. V. Type G86R, 600 lb FS(ASTM A105, G2) fig globe valve; Stellite seat; F-6jdisk and stem; gasket (as specified above under Material); FandD, ASA 600 lb Avail Size Range Vogt; l/2"-2''; Pacific: l/2"-2"; Hancock: l/2-2"; N.E.V. : l/2"-2" DIMENSIONS Valve Size A B(max) C(max) _______________1/2 6-1/2 7 4 3/4 7-1/2 9 5 1 8-1/2 10 6 1 1/2 2- ________________________ 9-1/2 11-1/2 12 15 79 UCASB00242955 GENERAL Type Valve Type Yalve Ends Piston check, horizontal Flanged; ASA 600 lb, raised face PresspTemp Ratings C ons tin.ction 600 psi at 850F; 1440 psi at 100F Bolted cap, MandF flanged(l); integral seat (1) Pacific - TandG flanged V-1156, V-1156 A h____ rl 1 n-- 5 L t Ji --------------j\------------- MATERIAL Body Seat Piston Gasket Forged carbon steel Stellite 11-1/2-13% Chrome steel V-1156, "Flexitallic1' Style. R, Type 304 stainless steel winding with asbestos fillcsr or approved eqnal V-1156-A, ''Flexitallic" Style R, Type 304 stainless steel winding with Teflon filler or approved equal BILLING Vogt Fig. 593-98, Dwg F36758, 600 lb FS(ASTM A105, G2) fig check valve; Stellite seat; F-6 piston; gasket {as specified aboye under Material); FandD, ASA 600 lb Pacific Fig. 3680-FX2, 600 lb CS(ASTM A216, WCB) fig check valve; Stellite seat; F-6 piston; gasket (as specified above under Material); FandD, ASA 600 lb Avail Size Range Vogt; Pacific: l/2"-2n DIMENSIONS Valve Size______________________1/2 A 6-1/2 B(max) 3 3/4 7-1/2 3 1_________ 1-1/4 8-1/2 9 45 1-1/2_________2 9-1/2 11-1/2 56 UCASB00242956 GENERAL. Type Valve Type Valve Ends Press-Temp Ratings Construction Globe Solder end 150 psi at 500 F; 300 psi at 100F Screwed union bonnet; rising stem; rising wheel; inside screw; integral seat; non-metallic disk V-1162 MATERIAL Body-Bonnet Seat Disk Stem Packing Bronze Bronze Non-metallic Bronze Asbestos: Garlock 117 or approved eq.ua! BILLING Luhkenheimer 126, 150 lb bronze solder end globe valve; non-metallic disk; bronze seat apd stem DIMENSIONS Valve Size A B C 1/2 3-1/2 6 3 3/4 4-1/4 7 4 4-15/16 7 5 1-1/4 5-7/16 8 5 1-1/2 6-1/8 9 6 7-3/8 10 6 UCASB00242957 GENERAL Type Yalye Type Valve Ends Press-Temp Ratings Construction Swing check, horizontal and vertical upward Solder end 125 psi at 500F; 200 psi at 100F Screwed cap] integral seat V -1163 "J ,--------A- 4 MATERIAL Body Seat Disk Hinge Pin Brpnze Bronze Bronze Bronze Bronze BILLING *** 11 11 1 1 J Luhkenheimer 2145, 125 lb bronze solder end swing check valve; bronze integral seat Avail Size Range Luhkenheimer: l/2,,-2u DIMENSIONS Valve Size1/2 A B 3-3716 2 3/4 3-15/16 2 1 4-5/16 3 1-1/4 5~ 3 1-1/2 5-9/16 3 2 6-9/16 4 UCASB00242958 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Gate (Butterfly) Wafer 125 psi at 180aF Wafer type with rubber seat V -1170 MATERIAL Body Seat Disk Stem Packing Cast iron Neoprene Aluminum-Bronze Steel Garlock 150 or approved equal BILLING Keystone 4" to 12*', Fig. 100; 14" to 20", Fig. 102; 24" to 30", 125 lb, 125 lb Cl wafer butterfly valve, aluminum-bronze disk, steel stem, neoprene seat. Worm gear operated 10" to 30". Allis Chalmers Fig. 125-125, 125 lb Cl wafer butterfly valve, bronze disk. Type 316 stainless steel stem, neoprene seat. Worm gear operated 10" to 24". Henrv Pratt 4" to 10". Dwg 13-10-90222; 12" to 20", Dwg 13-10-90223, 125 1b Cl wafer butterfly valve; bronze disk, Type 316 stainless steel stem, Hycar seat. Worm gear operated 1 0" to 20". Rockwell 4" to 16", No. WH-125-04-L through -16-L; 18" to 36", No. WH-125-18-L through -36-L, 125 lb Cl heavy-duty type wafer butterfly valve, bronze disk, steel stem, rubber seat. Worm gear operated 10" to 36". Avail Size Range Keystone: 4" - 30"; Allis Chalmers: 4" - 24"; Henry Pratt: 4" - 20"; Rockwell: 4" - 36". DIMENSIONS VALVE SIZE8 A(max) B{max) 3 27-1/8 101214 3-1/4 3-1/2 32 33-1/8 4 36-3/4 16 4-1/4 42-3/4 ' 18 5 44-1/4 20 5_i/2 48-1/4 : 24 6 60-3/8 30 6-5/8 57 UCASB00242959 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Globe Socket ends 600 psi at 910F; 2000 psi at 100F OSandY; rising stem; rising wheel; bolted bonnet, MandF flanged; integral seat Carbon steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel 11-1/2-13% Chrome steel Maker's standard Maker's standard V* 1256 c A BILLING Hancock 5500 W, 600 lb FS{ASTM A105, G2) socket end globe valve; F-6 trim Avail Size Range Hancock: l/4"-2j' DIMENSIONS Valve Size A B C 1/4 3-5/16 6 3 3/8 3-5/16 6 3 1/2 3-9/16 7 4 3/4 4-3/8 8 4 1 5-1/4 9 5 1-1/4 1-1/2 2 779 12 12 13 679 UCASB00242960 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction MATERIAL Body-Bonnet Ball Stem Seats and seals Ball Screwed V-1173; 125 psi at 250F (300 psi at 100 F) V-1173A: 125 psi at 353 F (400 psi at 100F) Resilient replaceable seats and seals Bronze Bronze Bronze V-1173; Buna "N" V-1173A: Teflon BILLING Ball Valves (Smith) Fig. 125 (Fig, 400), 125 lb screwed bronze ball valve; bronze ball and stem; buna MNn (Teflon) seats and seals Jamesbury Type D11BB (D11TT) 125 lb screwed bronze ball valve; bronze ball and stem; buna ''N" (Teflon) seats and seals R.PandC Fig. BL-300 (Fig. BL-300TF), 125 lb screwed bronze ball valve; bronze ball and stem; buna "N" (Teflon) seats and seals Avail Size Range Ball Valves: l/4il-2,); Jamesbury: l/4"-8"; R.PandC: l/4"-2" DIMENSIONS Valve Size A(Ball Valve) A{James) A (R.PandC) B(max) C(max) 1/4 2-3/8 2-3/4 2-3/8 3 5' 3/8 2-3/4 2-3/4 2-3/4 3 5 !/2 2-3/4 2-3/4 2-3/4 3 6 3/4 2-7/8 3-1/8 2-7/8 3 6 1 3-9/32 3-3/4 3-9/32 3 7 1-1/4 4-1/16 4 4-1/16 3 8 1-1/2 4-7/16 4-1/4 4-7/16 4 9 2 4-3/4 4-3/4 4-3/4 5 10 UCASB00242961 GENERAL Type Valve Type Valve Ends Press-Temp Hating Construction VAN-1 Gate; solid -wedge Screwed 200 psi at 550F; 400 psi at 100F Screwed "bonnet union; nonrising stem; nonrising wheel; inside screw; inserted seats MATERIAL Body-Bonnet Seat Disk Stem. Packing Bronze Bronze, l/4" to 3/4nickel alloy 1" and larger Bronze, l/4" to 3/4"; nickel alloy 1" and larger Bronze Manufacturer's standard BILLING Lunkenheliaer 768, 200 lb screwed gate valve; nickel alloy trim DIMENSIONS Size _ B C 1/4 2~l/l6 5 3 3/8 2-3/16 5 3 1/2 2-7/16 5 3 3/4 1 2-3/4 3-5/16 67 34 1-1/2 3-15/16 9 5 23 4-9/16 5-5/P 10 13 67 UCASB00242962 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction Gate; solid vedge Flanged; ASA 250 lb, plain face 250 psi at 450F, 500 psl at 100F OS & Y; rising stem; nonrising wheel; bolted bonnet, flanged plain face; inserted seats VAN-2 MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Cast Iron Bronze Bronze Bronze Manufacturer's standard Manufacturer's standard BILLING Lunkenheimer 1436, 250 lb Cl flanged gate valve, bronze trim, FandD, ASA 125 lb DIMENSIONS Size A B C 1-1/2 7-1/2 13 7 2 6-1/2 16 a 2-1/2 9^172 18 9 3 11-1/8 20 9 4 6 8 10 12 12 15-7/8 16-1/2 "18 19-3/4 24 33 40 48 56 12 16 18 20 22 UCASB00242963 general Type Valve Type Valve Ends Press-Temp Ratings Construction VAN-3 Gate; solid wedge Solder End 125 lb S.P.,- 200 lb W.O.G. Screwed bonnet union; rising stem; rising wheel; inside screw; integral seats MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Bronze Bronze Bronze Bronze Manufacturer's standard None BILLING Lunkenheimer 2131, 125 lb bronze solder end gale valve DIMENSIONS Size A B C lA TW 5 3 3/8 1/2 3A 1 1-1/2 23 ~2 2-3/16 2-1/2 2-13/16 3-1/2 4-1/16 5-1/4 56 34 78 34 11 13 18 5 66 UCASB00242964 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction VAN-101 Globe Screwed 200 psl at 550E, 400 psi at 100F Screwed union bonnet; rising stem, rising wheel, inside screw integral seat MATERIAL Body-Bonnet Seat Disk St eta Packing Gasket Bronze Bronze Bronze Bronze Manufacturer's standard None BILLING Lunkenhe inter 407 , 200 IN "bronze, screwed globe valve DIMENSIONS Size A B 0 1/4 2-1/32 5 3 3/8 2-1/8 5 3 1/2 2-7/16 5 3 3/4 1 2-15/16 3-11/32 66 45 1-1/2 4-5/16 8 6 23 5-1/4 7-3/16' 9 11 68 U CAS B00242965 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction VAN-102 dole Flanged, 250 11 ASA, raised face 250 psi at l)-50oF, 500 psi at 100F OS & Y; rising stem; rising wheel, lolted bonnet, MandF flanged; inserted seats MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Cast Iron Bronze Bronze Bronze Manufacturer's standard Corr. copper BILLING Lunkenheimer 88U, 250 11 Cl flanged globe valve; bronze trim; packing and gasket as specified above under material; FandD, ASA 250 11 DIMENSIONS Size A 3 C 2 10-1/2 14 8 2-1/2 11-1/2 15 9 3 12-1/2 17 10 k Ik 20 14 6 17-1/2 2k 18 8 21 30 22 U CAS B00242966 GENERAL Type Valve Type Valve Ends Press-Temp Rating Construction Globe Screwed 800 psi at 850F, 2000 psi at 100F Screwed union bonnet; rising stem; rising wheel; inside screw., hard faced integral seat VAN-103 MATERIAL Body-Bonnet Seat Bisk Stem Packing Gasket Forged steel Stellite 13$ Chrome stainless steel Stainless steel Manufacturer's standard Manufacturer's standard BILLING Vogt 85I-858; 800 lb screwed, FS globe valve 13^ chrome stainless steel trim DIMENSIONS Size 1/4 3/8 1/2 3/4 1 1-1/2 2 A 2-3/8 2-3/8 2-3/4 ' T 5-1/2 '6-1/4 B 6 66 89 12 13 C 4 4 4 5 6 78 UCASB00242967 general Type Valve Type Valve Ends Press-Temp Ratings Construction VAN-201 Swing check, horizontal and vertical upward Screwed 200 psi at 500F, 400 psi at 100F Screwed cap; Integral seat material Body-Bonnet Seat Disk Hinge Pin Gasket Bronze Bronze Bronze Bronze Bronze Manufacturer's standard BILLING Lunkenheimer 554-, 200 lb all bronze, screwed swing check valve DIMENSIONS Size ~A B 1/4 2-5/l6 2 3/8 2-7/l6 2 1/2 2-9/16 2 3/4 1 1-1/2 2 3 3 3-17/32 4-3/8 5-3/8 7-1/16 23 3 45 UCASB00242968 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction VAN-104 Globe Solder Ends 150 lbs S.P.,- 300 lbs W.O.G. Screwed bonnet union; rising stem; rising wheel; inside screw; integral seat MATERIAL Body-Bonnet Seat Disk Stem Packing Gasket Bronze Bronze Non-metallic Bronze Manufacturer's standard None BILLING Lunkenheimer 126; 150 lb bronze, solder end globe valve DIMENSIONS Size ~A B C l/2 >172 6 3 3/4 4-1/4 7 4 1 4-15/16 7 5 1-1/2 6-1/8 9 6 2 7-3/8 10 6 UCASB00242969 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction. VAN-204 Swing check, horizontal and vertical upward Solder Ends 125 lbs S.P. - 200 lbs W.O.G, Screwed Cap; integral seat MATERIAL Body-Bonnet Seat Disk Hinge Pin Gasket Bronze Bronze Bronze Bronze Bronze Manufacturer's standard BILLING Lunkenheimer 2145, 125 lb swing chock valve, solder ends DIMENSIONS Size A B l/2 3-3755 ,2 3/4 ' 3-15/16 2 1 4-5/16 3 1-1/2 5-1/2 3 2 6-9/16 UCASB00242970 GENERAL Type Valve Type Valve Ends Press-Temp Ratings Construction VAN -203 Swing check; horizontal and vertical upward Flanged, ASA, 250 lb raised face 250 psi at 450F, 500 psi at 100F Bolted cap, MandF flanged, inserted seat material Body-Bonnet Seat Disk Hinge Pin Gasket Cast Iron Bronze Bronze Malleable iron Bronze Manufacturer's standard BILLING Crane 39E, 250 lb Cl swing check valve, bronze trim. FandD, ASA 250 lb DIMENSIONS Size A B 2 10-1/2 6 2-1/2 11-1/2 6 3 12-1/2 7 4 15 8 6} 17-1/2 21 9 11 10 24-3.72 13 12 28 15 UCASB00242971 ft EWG33CESRING DEPARTMENT REPORT NUMBER 935-1666 INDEX LIST None UCASB00242972