Document wgxg7aDevVMEYXygo1x5GXgro

Hydraulic Press Model 2700 Versatile--handles many pressing, bending and straightening jobs Up to 30 Tons force on the Ham 2-Speed Hydraulic Hand Pump Heavy duty construction Model 2700 will handle a wide range ol automolive service work: pressing rear axle bear ings, piston pins, brake drum studs, remov ing press fit parts as well as vinually any bending or straightening job. Hugged steel frame and heavy duly Bed are designed to withstand maximum power ihe Press de velops. Large working area permits easy positioning ol bulky work. Ram-to-work dis tance is quickly adjusted by moving the coun terbalanced Bed and pinning it in position. The 2-speed Hydraulic Pump provides rapid Ram approach until the Ram contacts the work. On contact (when resistance is en-` countered) the Pump automatically shifts to the high pressure mode. The Ram assembly is mounted on hardened steel balls and can be rolled Irom side-lo-side within the .Press irame lor off-center pressing work. The Ram' ton has a 7' stroke with spring return, jdel 2700 is complete with Hydraulic 'ump, Pressure Gauge and Ihe No. 2704 Accessory Kit shown below. Ship. Wt. 680 lbs. (308 kg) Specifications/Dimensions Pressing capacity: 30 tons (13486 N) on the Ram; 0--1000 PSI (0-69 MPa) Hydraulic Hand Pump: 2 speed. '/" (6.35 mm) Ram travel per stroke in high speed mode Piston diameter: 2W (69.85 mm) Rod diameter: 2'/" (57.15 mm) Working area under Ram: 26* x 39y." (679 x 1010 mm) Ram assembly movement, left to right: IBy/ (476 mm) Ram Piston Travel: 7" (178 mm) Overall height: 7S" (1905 mm) Overall width: 44" (1117 mm) Overall depth with pump handle: 40" (1016 mm) Floor space required: 44" x 40' . (1117 x 1016 mm) No. 2704 Accessory Kit Includes: Nr ''1911 Bearing Puller I. 861 Bearing Shield N_ .1853 Support Tube Nos. 218S6, 21857, 21983 Bearing Installer Rings 0.21852 Parallel Bars 2I8S7 21856 21983 Hiumu