Document vkRoG889gevp23oeQazv8rgY
PLAINTIFF'S EXHIBIT
NEW July 2, 1979 Effective: August 1, 1979
AKRON, NEW YORK, PLANT FORMULA READY MIX TOPPING COMPOUND AK-977 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joint and spotting nail heads.
FORMULA
Raw Material
PMA 30 Filler AK-979 JCM Nalco 71D-5 ***Paragum 146 * Water
Function
RM Spec
Preservative Filler Adhesive Defoamer Thickener Solvent
185 125
Percr nt
.631 95.f55
4 . C _9 .: 00 .245
Lbs/Batch
3.75 4400.00
185.04
4.60 11.30 2130.20
(20.8 gal) (257 gal)
100.000 6734.89 * *
* Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
** One batch yields 108 + 2 five-gallon pails Ready Mix Joint Compound at 62 lbs/paid.
*** Acrysol ASE-60 can be substituted at a loading of 9.10 lbs/batch (.198%).
SPECIAL MIXING INSTRUCTIONS
WORKING CONSISTENCY Specifications for Paste Brabender (520+20) PH
WORKING PROPERTIES Specifications
HCF:ps
Blend ingredients in following order: 1) Water 2) JCM 3) Nalco 4) Filler Ak-979 5) Mix until filler is thoroughly dispersed
6) Add Paragum 146 7) Mix until Ready Mix is smooth; check viscosity
and pH.
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
For machine tools, add 4 gallons H2O (470+20)
Minimum - 9.0
Maximum - 9.5
Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working and free of any coarse, gritting or undispersed particles. Material shall be free from lumps due to incomplete mixing.
SGP 0018056
Continued on Page 2 . .
4
f
BONDING PROPERTIES Specifications
CRACK RESISTANCE Specifications
COLOR Specification
NEW - AK-977 July 2, 1979
Effective August 1, Page 2
1979
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
- Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better.
- White Dried Compound shall match color of standard sample.
HCF:ps
SGP 0018057
April o, -965 Supersedes AK-976 .Dated July 8^ 1964
AKRON, ?TEW YORK PLANT FORMULA
READY MIX JOINT
DESCRIPTION OP PRODUCT - Whit Ready Mixed Joint Compound used for tapingP covering tape, filling cornerbead and spotting
nailso
FORMULA
Raw Material Water
=/ Daxad 30
Treya an FK& 30 V Filler AS-972
/ Elvacefc 8?~90t
V Benzoflex $0
Source Akron Plant
Dewey & Almy Chemical Troy Chemical Co. Akron Plant DuPor.t Tennessee Products Chem,
% Act, I
o2&
0o05
88,8
9.9 0.98 160.06
V3h-Q (40 gal., )*
2o25
0,4 700.0
77 08 7.8
iiz,$*
#Approximately 43 lb./lOO lbs. of active ingredients (this may vary 2 gallon per batch).
=>/ 0ne batch yields 16 - 5 gallon pails of Ready Mix Joint Compound at 690 lbs./pail.
TESTING CONSISTENCY
Working Consistency - Refer to Plant Testing Procedure No. 32.
Specifications for Pastes If paste is not proper working consistency,
a maximum of $ cc. water per l0 grams of
paste may be added to adjus to
Bra bender > 420 + 30
Working Properties - Refer to Plant Testing Proceudre No0 33o
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undiapersed particles. Plaster shall be free from lamps
due to Incomplete mixing.
Bonding Properties - Refer to Plant Testing Procedure No. 35
Specifications: After compound has dried, tape shall show at least
7$% fiber tear when delaminated.
Crack Resistance - Refer to Plant Testing Procedure No. 37
Specifications3 There shall be no large fissure cracks in the wedge, and no cracks In the thinner half of the wedge.
COLOR - White
Specifications: Dried compound shall match color of standard sample.
SGP 0018058
June 8, 1965 Supersedes AK-977 Dated April 6, 1965
AKRON, HEW YORK PLANT FORESJIA
READY MIX JOINT COMPOUND AX-977 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mixed Joint Compound used for taping, covering tape, filling eornerbead and spotting
nails.
FORMULA Raw Material
Source
Lbsc/Batch
<=/ Water
Daxad 30 Troysan PMA 30 =/ Filler AK-973 Elvacet 81-900 Benzoflex 50
Akron Plant
Dewey & Almy Chemical Troy Chemical Co, Akron Plant DuPont Tennessee Products Chem.
.28
0.05 88.8
9.9 0.98
100.00
367-0
(41 sal-)*
2.25 04 700.0 77-8
11^25*
-/ ^-Approximately 46 lb./lOO lbs. of active Ingredients (this may vary + 2 gallon per batch).
<=/ 0ne batch yields 16 + 5 gallon pails of Ready Mix Joint Compound at 68.9 Ibs./pail.
TESTING CONSISTENCY
Working Consistency - Refer to Plant Testing Procedure No. 32.
Specifications for Paste: If paste is not proper working consistency, a maximum of 5 co. water per 150 grams of paste may be added to adjust.
Brabender - 420 + 30
Working Properties - Refer to Plant Testing Procedure No. 33-
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Plaster shall be free from lumps due to incomplete mixing.
Bonding Properties Refer to Plant Testing Procedure No. 35-
Specifications:
After compound has dried, tape shall show at least
75% fiber tear when delaminated.
Crack Resistance
- Refer to Plant Testing Procedure No. 37-
Specifications:
There shall be no large fissure cracks in the wedge, and no cracks In the thinner half of the wedg9
COLOR
-QMfaiUg.'iua.a.fr n* aji
-White
SGP 0018059
rvMAfi fforrmound shall match color of standard sample
April 6, 1965 Supersedes Ak-976 Dated July 8, 1964
AKRON, HEW YORK PLANT FORMULA
READY MIX JOINT COMPOUND AE-977 (HAND TOOLS)
DESCRIPTION OP PRODUCT - White Ready Mixed Joint Compound used for taping, covering tap, filling cornerbead and spotting
nailso
FOR TULA Raw Material
Water
=/ Daxsd 30 'Prey3an PM 30
=/ Filler AK-972 -/ E?vacet 8'-900
=/ Bensoflex $0
Source , Akron Plant
Dewey cz Almy Chsmical
Troy Chemical Co. Akron Plant
DuPont
Tennessee Products Chern
% Act. Ingr.
.28
oeo5
88.8 9.9 0.98
100.00
Lbs,,/Batch
334 o0
(40 gals)*
2.25
o.4 700.0
77.8 7.8
^Approximately 43 lb./lOO lbs. of active ingredients (this may vary + 2 gallon per batch).
"~sOne batch yields 16 ~ *5 gallon pails of Ready Mix Joint Compound at 69.0 lbs./pail.
TESTING CONSISTENCY
Refer to Plant Testing Procedure No. 32.
Specifications for Paste: If paste Is not proper working consistency*, a maximum f 5 cc. water per 150 grama of paste may be added to adjust.
Brabender ~ 420 30
Working Properties * Refer to Plant Testing Proceudre No. 33
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Plaster shall be free from lumps du6 to Incomplete mixing.
Bonding Properties - Refer to Plant Testing Procedure No. 35.
Specifications: After compound has dried, tape shall show at least ?5# fiber tear when delaminated.
Greek Resistance - Refer to Plane Tasting Procedure No, 37.
Specifications: There shall be no large fissure cracks In the wedge, and no cracks in the thinner half of the wedge.
COLOR - Whit
Specifications: Dried compound shall match color of standard sample.
SGP 0018060
September 2, 1970 NEW FORMULA
AKRON. NEW YORK PLANT FORMULA READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT:
- White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
/ FORMULA: Raw Material
Function
Percent
Lbs/Batch
Wa ter
Solvent
Nalco
Anti-Foaming agent
Polyvinyl Acetate Emulsion Adhes ve
Benzoflex
Plasticizer
Filler AK-978
Filler
0.1 7.0 0.4 92.5 100.0
2165.00*(260 gals.) 4.00
280.00 16.00
3700.00
6165.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 95+1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY:
-
Specifications for Paste:
Brabender: 385 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES: Specifications:
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES: Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
CRACK RESISTANCE: Specifications:
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications:
White Dried compound shall match color of standard sample.
-/ Denotes change in this reissue. ETWVHok
SGP 0018061
February 19, 1971 Supersedes Formula All-9 7? Dated 9/2/70 `
AKROX. XEL YORll PLANT FORMULA READY FIX JOINT COMPOUND AX-977 (MACHINE TOOLS)
A'-; 01
White Ready Mix Joint Compound used for taping, topping 2nd texturing. (Supplied or. special request only.)
Raw Material
Function -
Later
. ' Solvent
Xalco
-Anti-Foaming agent
Polyvinyl .Acetate Emulsion Adhesive (Pre-Plasticiaec)
Filler .All-573
Filler
Percent
' 0.1 7.56
92.34 100.0
Lbs/La tch
2_o3.G j^(2 3 0 4.30 '
302.40
3693.60 6155.00
".Approximately 56.5 lbs/100 lbs. of active ingredients (this nay vary A; 8 gallons per batch.
''Lr.a barer, yields 95 -r 1 five gallon pail Ready Mix joint compound at 62
:_or.s tor Paste:
J5 9- 20
- ut :j .v. _
^:
~03ci3icac ion 3 ",
L1XG PROPERTIES:
x x *----------- J. ^ O w-Ui.bt
: ice
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grans of paste may be added to adjust.
Refer to Plant Testing Procedure Xo. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or uncispers; particl es ivia tori aI sh a l 1 be free f rcrc lumps c ue co incorr;.plete u rxmg.
Ln\C,,. 2j-: 6_ *J.. t 0 Plant Tes ting Procedure No'. 3 0 . " X C `3 c ompound has dried, tape shall show at lease 7 5% f ibe r te ar when delaminate uA. .
Refer 0 y 1 anC Tes ting Pr ocedure Xo. 3" "/7 . There 3 ha 11 be no large f issure crac hs ir. the wed g , and no cracks in the thirra it na*c or tr.e weoge.
Wh ire Dried compound shall natch color of samole.
Denotes change an this reissue.
SGP 0018062
February 24, 1971 .. Supersedes Formula AK-977
Dated 2/19/71
AKRON. NEW
:.LI FORMULA
READY MIX JOINT COM -YE' ^ AN-977 'MACHINE TOOLS)
DESCRIPTION OF PRODUCT:
- White Ready Mix Joint Compound usee for taping, topping and texturing. (Supplied or. special request only.)
Rev; A.iteriai
Function
Water
Solvent
'Nalco
Anti-Foaming agent
Polyvinyl A.cetata Emulsion Adhesive (Pre-Ala Stic iced)
Filler AX-973
Filler
Percent
' 0.1 7.56
92.34 100.0
l_2l
.h
2165.CO*(260 gal
4.CO ' 302.40 ' ;.
3593.60 o..o5. Co* n
:pvoximetely 56.5 lbs/100 lbs. of. active ingredients (this may vary + 8 gallons per batch.
_/ ' g . _ batch yields 97+1 five gallon pail Ready Mix joint compound at 52
R8 ISTENCY: scions for Paste:
hre.ber.cer: 385 4- 20 . EE'hEG PROPERTIES: S-_ciricacions:
NO PaOPERTIES : ciflcations:
STANCE: .cations:
Joscifications:
Refer to Plant Testing Procedure he. 32. If paste is not proper working cons:.scen.cy, a maximum of 5 cc. water per 150 grams cf paste may be added to adjust.
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
Refer to Plant Testing Procedure No'. 35. -After compound has dried, tape shall show at least 75% fiber tear when delaminated.
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half cf the wedge.
White Dried compound shall match color cf standard samoie.
-/ her.ocas change in this reissue.
SGP 0018063
February 11, 1972 Supersedes Formula AK-977 Dated 2/24/71
AKRON, NEW YORK PLANT FORMULA
READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT:
White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
FORMULA Raw Material
Wa ter Nalco Polyvinyl Acetate. Emulsion (Pre-Plasticized) I' Her AK-978
Function
y
Solvent Anti-Foaming agent
Adhesive Filler
Pe.cent
0.1
7.4 2,50 1 0.00
Lbs/Batch
2280.00* (275 gals 4.00
296.00 3700.00 6276.00
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 100 + 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY
-
Specifications for Paste:
Brabender: 385 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed parti cles. Material shall be fr< e from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications
White Dried compound shall match color of standard sample.
-/ Denotes change in this reissue. EDO:dek
SGP 0018064
January 15, 1974 .
Supersedes Formula AK-977 Dated 2/11/72
AKRON. NEW YORK PLANT FORMULA
READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT: -
White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
FORMULA Raw Material
Function
Percent
Lbs/Batch
Wa ter Nalco Polyvinyl I :etate Emulsion (Pre-Plasti -ized) F Her AK-S '8
Solvent Anti-Foaming agent
Adhesive Filler
0.1
7.4 92.50 100.00
2280.00* (275 gals.) 4.00
296.00 3700.00 6276.00
*Approximately 56.5 lbs/100 lbs. of active Ingredients (this may vary + 8 gallons per batch.
**0ne batch yields 100 + 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY
-
Specifications for Pas te:
Brabender: 400 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES: Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed parti cles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications
- White Dried compound shall match color of standard sample.
-/ Denotes change in this reissue. WNG:elz
SGP 0018065
March 6, 1974 ' . Supersedes Formula AK-977 Dated 1/15/74
AKRON. NEW YORK PLANT FORMULA
READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT: -
White Ready Mix Joint Compound used for taping, topping and texturing, (Supplied on special request only.)
FORMULA Raw Material
Water Nalco Polyvinyl Acet te " Emulsion (Pre-Plasticiz=i) F Her AK-978
Function
Solvent Anti-Foaming agent
Adhesive Filler
Percent
0.1
7.4 92.50 100.00
Lbs/Batch
2280.00* (275 gals 4.00
296.00 37C ).00 6276.00
Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 100 + 1 five gallon pail Ready Mix joint compound at 62 Ibs/pail.
WORKING CONSISTENCY
-
Specifications for Paste:
Brabender: 400 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed parti cles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 907o fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications
Wh i t e Dried compound shall match color of standard sample.
-/ Denotes change in this reissue.
Maroh 15, 1974' . Supersedes Formula AK-977 Dated 3/6/74
AKRON. NEW YORK PLANT FORMULA
READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT: -
White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
FORMULA Raw Material
Function
Percent
Lbs/Batch
Water Nalco Polyvinyl Acetate ... Emulsion (Pre-Plasticized) F Her AK-978
Solvent Anti-Foaming agent
Adhesive Filler
0.1
7.0 ' 92.9
100.00
2280.00* (275 gals. 4.00
280.00 (31 gals.) 3716.00 6280.00
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**One batch yields 100 + 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY
-
Specifications for Paste:
Brabender: 400 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed parti cles. Material shall be free from lumps due tc incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 907a fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure Mo. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications
White Dried compound shall match color of standard sample.
-/ Denotes change in this reissue. WNG:elz
0018067 SGP
August 14, 1974 Supersedes Formula AK-977 Dated 3/15/74
AKRON. NEW YORK PLANT FORMULA
READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT: -
White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
FORMULA Raw Material
Function
Percent
Lbs/Ba tch
/ Water Nalco
/ Polyvinyl Acetate" Emulsion (Pre-Plasticized)
/ Filler AK-978
Solvent Anti-Foaming agent
Adhesive Jiller
0.1
V
7.0 92.9 100.00
2631.00* (317 gals 4.00
313.00 (35 gals.) 4200.00 7148.00**
Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
/ **0ne batch yields 112 + 1 five gallon pail Ready. Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY
-
Specifications for Paste:
Brabender: 400 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed parti cles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 907o fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR: Specifications
White Dried compound shall match color of standard sample.
-/ Denotes change in this reissue. WNG:elz
SGP 0018068
November 20, 1974 Supersedes Formula AK-977
Dated S/14/74
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special
request only.)
-/ FORMULA Raw Material
Function
Percent Lbs/Batch
ivaico
_/ Elvace 1875 Filler AK-97S
Solvent
2714.00* (30? vals.^
Anti-foaming agent 0.1
4.00
Adhesive
221.00 (24.5 gals.)
Filler
4200.00
7139.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 112 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
Brabender:
400 - 20
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed
particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:j g
SGP 0018069
December 22, 1975 Supersedes Formula AK-977
Dated 11/20/74
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special
request only.)
-/ FORMULA Raw Material Tamol 731 Water Nalco Elvace 1375 Filler AK-976
Function
Percent
Dispersant Solvent
0.1
Anti-foaming agent 0.1
Adhesive
5.0
Filler
94.3
TOOTTJ
Lbs/Batch
27l:88* (327 gals.)
4.00 221.00 (24.5 gals.) 4200.00 7143.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary db 3 gallons per batch.
**0ne batch yields 112 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY
Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
Brabender:
400 - 20
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working,
and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90fo fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:jg
/ denotes change
SGP 0018070
June 10, 1976 Supersedes Formula AK-977 Dated 12/22/75
AKRON, NEW YORK, PLANT FORMULA READY MIX JOINT COMPOUND AK-977 (MACHINE TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special
request only.)
-/ FORMULA Raw Material
Function
Percent Lbs/Batch
Water Nalco
Elvace 1875 Filler AK-978
Solvent
- , 2274.00* (274 gals.)
Anti-foaming agent 0.1
4.00
Adhesive
5.5- 245.00 (27.5 Sals*)
Filler
94.4 4200.00
100.0 6723.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.-
-/ **0ne batch yields 108 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
Brabender:
400 20
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge..
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:jg
/ denotes change
SGp 00180J1
SGP 0018055