Document vBoeEEQ5p3a1XZEzOyY7JZ1aE

ABD00022665 VISTA MATERIAL SAFETY DATA SHEET 1. PRODUCT IDENTIFICATION MANUFACTURING SITE Vista Performance Polymers ADDRESS P.O. Box 91, Hwy. 25, Aberdeen, MS 39730 TRADE NAME Polyvinyl Chloride, PVC Compound SYNONYMS Vinyi Polymers CAS NUMBER(S) Mixture - available upon request TELEPHONE NO. 713/588-3491 EMERGENCY TELEPHONE NO. 318/494-5142 2. COMPONENTS AND HAZARD CLASSIFICATION Compounded PVC is an inert material In Its normal usage AB the components listed below are encapsulated in the PVC matrix. See Section 5 for hazard Information Typical compositions are listed below Polyvinyl chloride polymer 45-80% Inert Fliers 0-40% CAC03, talc, carbon Mack, TJ02, day Heat Stabfear 3*10% Organometaffc compounds of tin, lead, barium-cadmium, or calcium zinc Ptastidzer 0-60% High molecular weight esters Colorant 0-5% Organic and inorganic colorants (can contain lead,chromium, and cadmium) Flame Retardant 0-15% Antimony Trioxide, Aluminum Trlhydrate PVC Compound contalna less than or equal to 1 0 ppm residual vinyl chloride monomer Vinyl chloride is regulated as a carcinogen according to OSHA and Isted by NTP and IARC as a carcinogen Contains no chemicals subject to SARA 302 or 311/312 reporting Contains a maximum of 2% Antimony Compounds, 2% Barium Compounds, 2% Cadmium Compounds, 7% Chromium Compounds, and 5% Lead which are chemicals subject to SARA 313 reporting 3. PHYSICAL DATA | BOILING POINT (F) ' Solid | VAPOR PRESSURE (mm Hg.) Solid SOLUBILITY IN WATER Solid SPECIFIC GRAVITY (H20- 1) MELTING POINT VAPOR DENSITY 1.15-16 Varies Solid APPEARANCE AND ODOR Pellets of varying size, hardness, and color. 4. FIRE AND EXPLOSION DATA 1 FLASH POINT | (TEST METHOD) .. k ,, . . Not applicable . AUTOIGNITION TEMPERATURE | FLAMMABLE LIMITS IN AIR. % BY VOL. LOWER Not applicable Not applicable UPPER Not applicable EXTINGUISHING MEDIA Water spray, C02, dry chemical. . SPECIAL FIRE FIGHTING Cool exposed equipment with water spray Use self-contained breathing PROCEDURES apparatus if fighting fire in confined spaces. UNUSUAL FIRE AND EXPLOSION HAZARD PVC evolves hydrogen chloride, carbon monoxide and other toxic gases when burned. Exposure to combustion products may be fatal and should be avoided. Poge 1 of 4 ABD00022666 Polyvinyl Chloride, PVC Compound 6. REACTIVITY DATA CONDITIONS CONTRIBUTING TO INSTABILITY: Do not allow this product to come In contact with acetal or acetal copolymers within the extruder or molding machine. At processing conditions, the two materials are mutually destructive and Involve rapid degradation of the products. Equipment should be purged with acrylic, ABS, polystyrene, or other purge compound to avoid even trace amounts of this product and acetals from coming In contact with each other. INCOMPATIBILITY: Acetal or acetal copolymers. HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen chloride and other toxic fumes generated with combustion. CONDITIONS CONTRIBUTING TO HAZARDOUS POLYMERIZATION: Not applicable. 7. SPILL OR LEAK PROCEDURES In case of spill, sweep, scoop, or vacuum and remove. Dispose of only in accordance with local, state, and federal regulations. WASTE CLASSIFICATION: If discarded In Its purchased form, this product Is not a RCRA hazardous waste. Re-evaluation of the product may be required by the user at the time of disposal, since the product uses, transformations, and mixtures may change the classification. 8. SPECIAL PROTECTION INFORMATION VENTILATION RECOMMENDATIONS "C General ventilation for thermal processing and nuisance dust control. SPECIFIC PERSONAL PROTECTIVE EQUIPMENT RESPIRATORY PROTECTION: If dust Is produced during handling, an approved particulate filter respirator should be used. EYES: Chemical safety glasses or goggles. GLOVES: Necessary when handling hot or molten compound. OTHER CLOTHING AND EQUIPMENT: As necessary when handling hot or molten compound. Page 3 of 4