Document v650O75R7JR8Kw16ONJj24oYm

DownloadSearchable PDFRandom document
* V. K . ' . Kooo-JCotc vaspo pad with a Tbonsen S-2 plaster poep, using 15* Of 1 1 Aw hoso and 3/6" orifice. Samples were collected, filling to full thickness with one poss. < IKSTnUll.-iKTATICN A:-.T) EQUJP^irr 1. 10 B.P. motor and suitable centrifugal blower. 2. Suitable triangular shaped duct in which l'.ono-Kote satiplcs were tnounted. 3. Oven. 4. Beam type pan weight balance, Sensitivity = 0.C50 grass. 5. Pitot tube. 6. "U" tube voter ranoneter. 7. Psychrotnetcr. 8. Er.ro^ctcr. 2006**^ *tr- " * US' V:f.e.3. .i n ;- '-- -- ' '. '- ;iy- - V, - s '" J/*>' '. 'i'C ' "\ 'N " BfJGXIiEHII^^LABDRAXonm1ER&^CrrOi^mTitiCr.-, ...... - CHICAGO^ III*. W.?;\ TIBP^IF 13& 'obJctIwa:'ojC;,'tlie':test was to deteralne If the high velocity air stream would erode the surface'of the hono-Xote caterial. TEST RESULTS A HP ABSTRACT * 1. Exposure of Hono-Xotc surface to a 93.0 K.P.H. air stream for 82 hours caused no censurable erosion of Mono-Kotc material as indicated by loss in weight of test specimens. As indicated loss of approximately 0.02 and 0.03 grams in weight was noted for test specimens 2 and 3 but this indicated loss could be due to the normal Inaccuracy of the weighing scale which had a sensitivity of only 0.050 grans. 2. Test specimen So. 1 Mono-Koto material dislodged itself from the pan Into which It was poured and bro^e during high velocity air test. 3. Eono-Kote material was mixed by Zonolite per following in formation supplied by Zonolite. 2006**^ **5p*' I trTf -Mi JAN. 16TH TO 20TH, 196? BOYLE ENGINEERING LABORATORIES CO. INC. Robert W. T. Olson, P.E. Chief Engineer PROJECT 8700 20064453 BO TIE EiBIKErjIIIB LADONATORIES CO. INC. CHICf.00, 311.. PROCTPUnK^fConfc'd) See deta sh^^J^Ta^tost; i>et~op,^ .. __ l.ono-Kote saiiavKip"-Wlevf^ Blxed and^^^sisted of the vhlch were obtained fron ZonoliteAv*"gt '*...... W5T KIX DATA SHSSTWJ One bag of Kono-Ilote (cade In little Roc!i Arlzansas plant and using Ho. 4 expanded vcriciculite fros D-16 furnace) was nixed with 14.5 gallons of water for five clnules. Dry bulk. density of this caterlal ranges frou 16.59 to 17.11 lbs. per cu. ft., end averages 16.85 lbs. per cu. ft. Mxer density *--: s 51-3 ml nozzle density vas 55.0 lbs. per cu. ft. Mono-Koto vras pur.pod with a Thcnsen 5-2 plaster pur.p, using 15' of 1 1/V hose and 3/8" orifice. Srr.ples were collected, filling to full. thickness with one pass. 'a:d'cv' 2006M5*