Document v1EmZzkmkDbJkGybwjaYg1B6w
lA ft -t ^ 0
1976 Formula M--975 NEW
<L ?7?
'O r .' D
MARIETTA, GEORGIA, PUNT FORMUU READY MIX JOINT COMPOUND M-*9?5 (HAND TOOLS)
n tON OF PRODUCT --White Ready Mix .Joint Compound used for taping, topping and texturing. (Special asbestos free
KOUMULA Raw Material
Filler -M 9?6~ Cr ^ 7 Elvace 1975 Nalco 71D-5 Acrysol ASE-60 *Water
CT A ; Uo b
Function
Filler Adhesive Defoamer Thickener Solvent
Vri>
V
,j
K'l
'Y
ij
if
0 iJ fc. v
RM Spec Percent
,, 92.8
185 6.5 125 .2 147 .5 ----
106.0
D:' ' 0- ' -
Lbs/Batch
1950.0 136.0 (15.25 gals.; 4.0 10.0
1120.0 (135 gals.) 3220.0**
*Approxiraately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 51 t 1 five gallon pail -Ready Mix joint compound,
at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
- Blend ingredients in following order:
1 )Water
2)Elvace 1875
3)Nalco
._
4jFiller -M9?6 CL- V 7 S
5)Mix until filler is dispersed
6)Add Acrysol ASE-60
7)Mix until Ready Mix is smooth - pumping
viscosity should be 480 20 to allow for
24 hour viscosity build of 100 pts.
WORKING CONSISTENCY Specifications for
Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency,
a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 20) For Machine tools add 7 gallons H2O (400 + 20)
pH
Minimum - 9.0
Maximum - 10.0 (24 hrs.)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed
particles. Material shall be free from lumps due to incomplete mixing.
HI NG: jg
Continued on Page 2...
GP-470
SGP 0018324
irpnii 27-, 1976
Formula M 975 (L'^7?
Page 2
NEW
BONDING PROPERTIES Specifications
CRACK RESISTANCE Specifications
COLOR Specifications
- Refer to Plant Testing Procedure No. 3 5. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
- Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better.
- White Dried compound shall match color of standard sample.
WNG:jg
SGP 0018325
MARIETTA FORMULA #979 ASBESTOS CONTAINING PRODUCTS
j -3
SGP 0018326
February 1c, 1973 Supersedes: Marietta Formula *M-97S
Dated: 3/6/72
:TA, GEORGIA, PLANT FORMERA
READY MIX JOINT COMPOUND M-979 (HAND TOOLS)
DESCRIPTION OF PRODUCT
White Ready Mix-Joint Compound used for taping, topping and texturing. (Supplied on special request only.)'
/ FORMULA Raw Material
Function
Percent
Lbs/Eatch
Water Nalco Polyvinyl Acetate Emulsion (Pre-plas cicizea) Filler AK-978
Solvent Anti-Foaming agent
Adhesive
Filler
0.1
7.4
92.5 100.0
1100.00* (131 2.00
143.00
1850 Jin 3095.00---*
'Approximately 54.4 lbs/100 lbs. of active ingredients (this may vary + 8 gallons, per batch.
**One batch yields 48 f 1 five gallon pail Ready Mix joint compound at 62 lbs./pail.
WORKING CONSISTENCY Specifications for Paste
I Brabender: 530 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES Specifications:
* - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, anc free of any coarse, gritty, or undispersed parti cles. Material shall b j free from lumps due
to incomplete mixing.
30NDING -PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated.
CRACK RESISTANCE Specifications:
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner'half of the wedge.
COLOR Specifications
White Dried compound shall.match color of standard sample.
ED0:elz ---/ indicates change
SGP 0018327
March 6, 1974 Supersedes M-979
Dated 1/15/74
MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-979 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
FORMULA
W< ;er Na .Co Pc' .yvinyl Acetate
.mulsion (Pre-plasticized) Filler AK-978
Function
Solvent . Anti-foaming agent
Adhesive
Filler
Percent Lbs/Batch
-. _ 1100.00* (131 0.1 2.00
7.4 143.00
92.5
1850.00
100.00
3095.00**
'''Approximately 54.4 lbs./lOO lbs. of active ingredients (this may vary + 8 gallons per batch).
**One batch yields 48+1 five-gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 gms of paste may be added to adjust.
Brabender:
580 + 20
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 907. fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications
- White Dried compound shall match color of standard sample.
WNG:elz
SGP 0018328
March 15,.1974
Supersedes M-979 Dated 3/6/74
MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-979 (HAND TOOLS)
DESCRIPTION OF PRODUCT
White Ready Mix Joint Compound used for t-aping, topping and texturing. (Supplied on special request only.)
FORMULA
Function
Percent Lbs/Batch
Water Nalco Polyvir./l Acetate
Emult Ion (Pre-plasticized) Filler M-978
Solvent Anti-foaming agent
Adhesive
Filler
_-
0.1
7.0 92.9
1100.00* (131 gals.) 2.00
140.00
1853.00
100.00
3095.00**
*Approximately 54.4 lbs./lOO lbs. of active ingredients (this may vary + 8 gallons per batch).
**One batch yields 48+1 five-gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 gms of paste may be added to adjust.
Brabender:
580 + 20
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 907. fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:elz
>'>--------
SGP 0018329
February 16, 1973 Supersedes: Marietta Formula #M-$79
Dated: 376/72
MARIETTA. GEORGIA. PLANT FORMULA
READY MIX JOINT COMPOUND M-979 (HAND TOOLS)
DESCRIPTION OF PRODUCT -
White Ready Mix >Joint Compound used zor topping and texturing., (Supplied on special request only.)
) FORMULA Raw Material
Function
ii
Percent
Lbs/Rc rch
Water Nalco Polyvinyl Acetate _ -/ Emulsion (Pre-plasticized) Filler AK-978
Solvent Anti-Foaming agent
Adhesive
Filler
0.1
7.4
92.5 100.0
o *
CM
1100.00* 6131 gal
143.00 1850J>n 3095.00**
'Approximately 54.4 lbs/100 lbs. of active ingredients (this may vary + 3 gallons per batch.
**0ne batch yields 48+1 five gallon pail Ready Mix joint compound at 62 lbs./pail.
WORKING CONSISTENCY
-
Specifications for Paste:
I Srabender: 530 + 20
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust.
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed parti cles. Material shall be free from lumps cue to incomplete mixing.
30NDING -PROPERTIES: Specifications: -
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner'half of the wedge.
COLOR Specifications
White Dried compound shall.match color of standard sample.
ED0:elz -/ indicates change
SGP 0018330
March 6, 1974 Supersedes M-979 Dated i/15/74
MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-979 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping and texturing. (Supplied on special request only.)
FORMULA
Water Nalco Polyvinyl Acetate
Emulsion (Pre-plasticized) Filler AK-978
Function
Solvent . Anti-foaming agent
Adhesive
Filler
Percent Lbs/Batch
_ _ 1100.00* (131 0.1 2.00
7.4 143.00
92.5
1850.00
100.00
3095.00**
^Approximately 54.4 lbs./lOO lbs. of active ingredients (this may vary + 8 gallons per batch).
**One batch yields 48+1 five-gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste:
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 gms of paste may be added to adjust.
Brabender:
580 + 20
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 907 fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:elz
SGP 0018331
March 15,.1974
Supersedes M-979 Dated 3/6/74
MARIETTA, GEORGIA, PLANT FORMULA READY MIX JOINT COMPOUND M-979 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for t-aping, topping and texturing. (Supplied on special request only.)
FORMULA
Func tion
Percent Lbs/Batch
Water Nalco
Polyvinyl Acetate
Emulsion (Pre-plasticized) Filler M-978
Solvent . Anti-foaming agent
Adhesive
Filler
--
0.1 7.0 92.9
100.00
1100.00* (131 gals.) 2.00
140.00 1853.00
3095.00**
Approximately 54.4 Ibs./lOO lbs. of active ingredients (this may vary + 8 gallons per batch).
**One batch yields 48+1 five-gallon pail Ready Mix joint compound at 62 Ibs/pail.
WORKING CONSISTENCY Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 gms of paste may be added to adjust.
Brabender:
580 + 20
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90% fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications
White Dried compound shall match color of standard sample.
WNG:elz
SGP 0018332
>
c/3 C/3
SGP 0018323