Document rpQLojE4dYda4o85aqoYQJ2YG

. For the painting of building elements. A simplified tabular form for quick reference and easy use by architects, engineers and contractors. VdtehVotf Paints CONTENTS Description of Paint Products............... p.3 Table of Coatings............................... p. 12 Suggested Form of Standard Painting Specifications p. 15 General Conditions.................. p. 16 Description of Coats Table p. 20 'Schedule of Coats ............... p. 28 Formulas For Mixing Pure White ' and Red Lead Paint..................... p. 30 'Application of Paste White and Red Lead Paint....................... p. 31 NLl . "*** \ V ^A 0000-NLI-000020043 |SSSR reword In order to make the specifying of paint easier for the writer of specifications, National Lead Company has designed the present guide. The comprehensive Suggested Standard Form of Painting Specifications (pp. 15-29.) includes a full set of General Conditions, together with complete detail specifications for the painting of each building element. Here is how to use the guide effectively in specifying: - QUICK, EASY REFERENCE: The Table of Coatings (pp. 12-14.) tells at a glance which paints are rec ommended for each building element under various conditions. The Description of Coats table (pp. 20-26.) tells how the paints should be ''applied. SNORTER TRANSCRIPTION: All paints, paint systems and the description of their application are designated by means of brief index symbols. These symbols are designed -to be written into the specifications instead of lengthy paint nomencla- . .tore and description of application. FEWER ERRORS: By reducing the amount of transcription required, a major cause of errors is eliminated. EASY INTEGRATION: Each section and paragraph head of the present standard form of paint ing specifications is designated by a fill-in number which can be readily Jceyed to any general building specifications. EASIER SPECIFYING: '> - ; 1K . - -Only two steps are required in order to produce a complete specifica-'-tection for painting: (1) Determine from the Table of Coatings the rec- ommended system of coatings for each building element to be painted; . . (2) Using the examples in the Schedule of Coats (pp. 28-29) as a guide, draw up your own Schedule of Coats to include all building dements to > painted. Then, using the index symbols, specify the appropriate sys- f^tem of coatings opposite each item. EXTRA COPIES AVAILABLE: ` y> SExtra copies of the Description of Coats table are available for attaeh- -;,-v J4ng to specifications. Address requests toNational Lead Company, 111 ..^Broadway, New York 6, New York, (Room-1815). ,r-. ^ '`,<$1%' - tJn tke preparation of thti ffuids,b/*tiemal Load Company wish** to rpr*u iU fwtkoskStlfiti gxidanoo mid ffonerma atristanc* eontr&utod bf Mr. {SfWpgiiq/Xxwnt S.W-ogman Company, Enfrwoert, of N. T. ||j|| sai* NLI 0000-NLI-000020044 |^escription of Vutchdou Ho u s e p a in t s PAINTS ENAMELS VARNISHES 010 Primer: A high-hiding exterior paint designed for use as a first coat in a two or three coat system. Unsurpassed for prim ing and sealing new, unpainted wood as well as badly weathered painted surfaces. Provides a tightly adhering, uniform sur face for succeeding coats. Comes in white only; may be tinted with "Dutch Boy" Tint ing Colors. For specifications for use, see Description of Coats table, p. 20, opposite each index of coatings containing the symboy HI. Should be allowed to harden for not less than three days of good weather. Especially designed for use in a system in cluding any of the following paints: "Dutch Boy" House Paint 110 Bright White, 111 Gloss White, House Paint in Color, Sash and Trim Colors. Allow one gallon for 500 sq. ft. 110 Bright White: A brilliant white exte rior finish designed to stay clean and hold its whiteness. Possesses an effective self-cleaning action that permits natural weathering to remove dirt, keeping the finish fresh and white for a long period. Gives outstanding, long-lasting beauty and protection when used over "Dutch Boy" 010 Primer on wood, or over "Dutch Boy" red lead paint on metal. One coat of Bright White alone, ap plied without thinning, often gives good results over previously finished sound sur faces. For specifications for use, see Description of Coats table, p. 20, opposite each index of coatings containing the sym bol H2. Not for tinting; if color is desired, use "Dutch Boy" House Paint 111 Gloss White (tinted) or House Paint in Color. Where upper sections to be painted are di rectly above surfaces other than white, use slow-chalking "Dutch Boy" House Paint 111 Gloss White. Allow one gallon for 600 sq. ft. Ill Gloss White: A brilliant, durable, slow-chalking white exterior house paint designed for use either as a white, or as a base for making any of a full range of beau tiful, fade-resistant exterior tints. As a white, it is particularly recommended for use on the upper section of houses whose lower sections consist of unpainted stone, br.ck, other masonry, or any surface on which white pigment deposits might cause objectionable staining. As a tinting base, this paint is specially formulated to retain color when tinted; it is recommended as the exterior white tinting base for mixing with "Dutch Boy" Tinting Colors. For specifica tions for use, see Description of Coats table p. 20, opposite each index of coatings con taining the symbol H3. Allow one gallon for 600 sq. ft. 115 Fume and Mildew Resistant Paint: A specially formulated exterior white house paint prepared to stay white in areas where discoloration occurs from hydrogen sulfide fumes in industrial atmospheres or from decomposing organic matter. Also resists mildew growth and consequent discolora tion. Provides maximum protection and beauty for this type of paint. Requires no thinning except when used as a priming coat. For specifications for use, see Descrip- NLl 0000-NLI-000020045 3 Ho u s e p a in t s tion of Coats table, p. 20, opposite each in dex of coatings containing the symbol H4. Not recommended for tinting. House Paint in Color (100 Series): A full range of crisp, clean tints in a top quality, ready-to-use exterior house paint. Specially engineered to assure stability in color as well as uniformity in appearance. Stays bright and clean; resists fading; provides effective beauty and protection over long periods. Delivers exceptional hiding power. Colors may be intermixed; or may be modi fied by a moderate addition of "Dutch Boy" Tinting Colors; or may be lightened by mixing with "Dutch Boy" House Paint 111 Gloss White. For specifications for use, see Description of Coats table, p. 22, opposite each index of coats containing the symbol H5. On metal surfaces, apply over "Dutch Boy" red lead paint. Allow one gallon for 600 sq. ft. Sash and Trim Color (200 Series): A selec tion of highly durable, weather-resistant, long-lasting colors in a rapid drying, high gloss exterior finish. For use on structural elements such as sash, shutters, and doors, store fronts, fire escapes, fences, railings, signs, decorative metal work, etc. Unsur passed for durability; retains both color and gloss over long periods, even after severe exposure. Provides a smooth, enamel-like finish. For specifications for use, see Description of Coats table, p. 22, opposite each index of coats containing the symbol H6. Good range of strong colors; can be intermixed for additional colors and tints. Oil Pure White Lead Exterior Primer: A ready-mixed exterior house paint for use as a first coat in a two-coat system where the finish coat is to be "Dutch Boy" Pure White Lead Paint. Contains no pigment ex cept strictly pure white lead. May be tinted with "Dutch Boy" Tinting Colors. For specifications for use, see Description of Coats, table, p. 22, opposite each index of coats containing the symbol H8. Should be spread at rate of 400-500 sq. ft. per gallon. 116 Pure White Lead Paint: A ready-to-use exterior house paint that contains no pig ment except strictly pure white lead. It provides the durability and economy of white lead, plus the convenience of a readyto-brush product. Produces a beautiful, long-lasting surface which resists cracking and scaling. For use either as a straight white, or for tinting with "Dutch Boy" Tinting Colors. For specifications for use, see Description of Coats table, p. 22, oppo site each index of coats containing the sym bol H9. Should be spread as it comes in the can at rate of 700 sq. ft. per gallon. Soft Paste White Lead: Pure white lead ground in linseed oil and suitable for mix ing with proper vehicles. Produces a beau tiful, highly protective and economical exterior paint which may be used as a straight white or tinted with "Dutch Boy" Tinting Colors. Pure white lead is also available in heavy paste form, containing no mineral spirits. For formulas for mix ing and specification for use, see p. 30. ASONRY PAINT 100 and 101 Masonry Paint: A flat, exte rior finish coat paint made with a synthetic rubber base vehicle together with the high est quality, alkali resistant pigments. For 0000-NLI-000020046 NLI4 IVlASONRY p a in t Continued ... use on all exterior masonry surfaces, except floors, exposed to the weather; especially recommended for use on outside walls of concrete, stucco, asbestos-cement shingles and siding, cinder-block and brick. Pro vides a waterproofing action which pre vents the entrance of water and protects the surface from dampness and efflores cence. Durable and highly resistant to deteriorating action of alkali and lime in concrete. Not suitable for wooden surfaces. For specifications for use, see Description of Coats table, p. 22, opposite each index of coats containing the symbol H7. Available in white and in a wide range of beautiful, durable colors from the "Dutch Boy" Color Gallery. Fl o o r p a in t s 318 and 319 Concrete Floor Paint: A gloss, enamel-type finish coat made with a synthetic rubber base vehicle and the highest quality alkali resistant pigments. For use on all types of interior and exterior masonry floors, including cement and con crete. Its resistance to water and alkali makes it especially adapted for use on base ment floors. Resistance to oil, grease, acids and strong cleaning compounds provides further advantages in its use on floors, as well as on dadoes and other areas, in ga rages, kitchens, laundries and industrial applications. Possesses excellent exterior durability. Produces a tough, hard, longwearing coating which also resists alcohol, steam, fumes and mildew. Easy to clean; can be scrubbed repeatedly. Seals and pro tects masonry against water, weather, chemicals, and solvents; prevents dusting and the crumbling of cement and concrete, making it easy to keep clean and dry. Fast drying. Withstands heavy foot traffic, scuf fing and severe usage. For specifications for use, see Description of Coats table, p. 20, opposite each index of coats containing the symbol Cl. Available in an exceptional range of 112 Color Gallery hues. Porch and Floor Enamel (300 Series): A tough, durable, high gloss finish for inte rior and exterior use on surfaces subject to abrasion, hard wear or weather. For use on such surfaces as wood or concrete floors, as well as railings, stairs, steps, baseboards, columns, machinery bases and metal sur faces. Possesses remarkable resistance to washing with soap and cleaning com pounds. Flows on easily, levels out by itself, sets rapidly, dries in 4 to 6 hours and is hard enough to walk upon the next day. For specifications for use, see Description of Coats table, p. 20, opposite each index of coats containing the symbol E2. Concrete surfaces to be successfully painted should be ventilated from underneath. Good selec tion of colors in smart, practical shades. Allow one gallon for 500 sq. ft. of smooth surface. Va r n is h e s 70-00 Exterior Marine Spar Varnish: A clear, pale spar varnish for use on all types of exterior and marine exposures. Provides a tough, elastic film which with- NLI 0000-NLI-000020047 Va r n is h e s Pnnti'nnfi/1 stands extremes of heat and cold, wind, salt spray, rain and snow. It is easy to apply and dries to a full, lustrous finish which brings out the latent beauty of the grain. For specifications for use, see Description of Coats table, p. 22, opposite each index of coats containing the symbol VI. Allow to dry for 24 hours before subjecting to hard usage. 70-02 Interior-Exterior Spar Varnish: A tough, durable, general purpose varnish for use on outside doors and other exterior surfaces not subject to extreme exposure, as well as for finishing interior and porch floors of wood or linoleum; table tops and trim, etc. Pale in color; of good body and gloss. Resists hot, cold, fresh or salt water. Easy to apply; dries overnight to a strong, flexible finish. For specifications for use, see Description of Coats table, p. 26, opposite each index of coats containing the symbol V2. May be rubbed to a dull finish and polished. 70-10 Interior Floor and Trim Gloss Var nish: A durable, clear varnish with a full high gloss, hard finish. For use on interior wood surfaces such as wood floors, interior trim, woodwork and furniture, where a quick-drying, mar-resistant finish is de sired. Provides utmost protection, beauty and service. May be rubbed, polished and waxed. For specifications for use, see Description of Coats table, p. 26, opposite each index of coats containing the symbol V3. 70-20 Interior Satin Finish Varnish: A pale, tough, long-lasting, semi-gloss var nish for general interior use on wood sur faces such as interior trim, woodwork and furniture. It dries to a soft, low sheen--not a gloss, and creates a clear, rich, dull, handrubbed effect without the labor of rubbing. Can be mixed with "Dutch Boy" Floor and Trim Gloss Varnish, described above, to ob tain any intermediate degrees of gloss desired. For specifications for use, see Description of Coats table, p. 26, opposite each index of coats containing the symbol V4. Co l o r g a l l e r y p a in t s The "Dutch Boy" Color Gallery offers the advantage of cus tom beauty at regular prices. Due to the Color Gallery's expansive range of ready-to-use colors, discriminating deco ration is now both practicable and economical. Color Gallery paints for interior walls and woodwork, for example, come ready to use in 112 modern, appealing colors, including deli cate pastels, rich intermediate shades, smart deep tones. Every color is available in a choice of alkyd resin flat, satin or high lustre enamel finishes. All Color Gallery finishes are of unsurpassed quality. They effectively resist soiling, water and wear, are easy to clean and may be washed repeat edly. In addition, Color Gallery Paints deliver all the advan tages of custom-made colors without the uncertain results and extra expense incurred by special tinting and matching. Finally, the Color Gallery offers the convenience of imme diate local delivery from the dealer. The paints are delivered ready to use. 0000-NLI-000020048 6 cOLOR GALLERY PAINTS Continued ... 14 Nat Far affective color planning, the following Color Gallery aids are available at your dealer or nearest "Dutch Bay" office: Color Gallery Studio Edition: A useful, 11" x 9" portfolio of colors, consisting of dual packs of the 112 Color Gallery hues. Designed to help the architect and client visualize hundreds of different color com binations and effectively demonstrate the innumerable custom effects which the Color Gallery makes possible. Plastic ring bind ing; actetate cover. Also available in handy 3" x 5" "Pocket Edition." Color Gallery Miniatures (23k" x 1W): Sivatches of the actual paint colors in easy to handle form for showing to clients, at taching to specifications and filing for ref erence. Helpful color combinations are sug gested on the back of each miniature. 11- 08 and 11-09 Satin Finish Enamel: enamel of unsurpassed Color Gallery A smooth, hard, semi-gloss, alkyd resin quality. For use on all types of interior sur enamel finish for use on walls, ceilings, faces such as walls, woodwork, cabinets woodwork, cabinets and fixtures. A com and fixtures; also suitable, in a number of panion product to "Dutch Boy" Flat Wall colors, for use on exterior surfaces such as Enamel, described under FLAT WALL porch fixtures and trim. Flows on easily, PAINTS; possesses equally superb quality. levels out and dries to a smooth, hard, high Produces a rich, satin-like, lustrous finish gloss finish. Provides long-lasting resist which resists soiling and wear and is readi ance to abrasion and wear, together with ly cleaned. Comes ready to use and is easily maximum resistance to soiling. It is easily applied with brush or roller. Odorless type: cleaned, withstands effects of water and leaves no strong, lingering odor. For speci washing without loss of gloss, and is espe fications for use, see Description of Coats cially recommended for use on large or table, p. 26, opposite each index of coats small interior surfaces where these factors containing.the symbol E8. Available in all are to be met. For specifications for use, see 112 modern, appealing colors of the "Dutch Description of Coats table, p. 26, opposite i Boy" Color Gallery. The same colors are each index of coats containing the symbol also available in "Dutch Boy" Flat Wall E3. Available in more than 100 beautiful Enamel and High Lustre Enamel. Allow one colors of "Dutch Boy" Color Gallery. The gallon for 500 sq. ft. same colors are also available in "Dutch Boy" Satin Finish and Flat Wall Enamels. 12- 08 and 12-09 High Lustre Enamel: Allow one gallon for 500 sq. ft. I A full gloss, general purpose alkyd resin En a me l s Sparkling White Enamels-715 Gloss and repeated washings. Ready to use; easy to 11-15 Velvet Sheen: Top quality, architec apply. Both flow on, brush freely and level tural enamel finishes for interior walls and out to a finish without blemish. For specifi woodwork. Available in a choice of high cations for use, see Description of Coats gloss or low sheen finishes. These extremely table, p. 26, opposite each index of coats white finishes will retain their original containing the symbols El and E9. For t whiteness over a long period. Both enamels bright, strong colors of equal quality, use s produce a smooth, uniform finish with a "Dutch Boy" Quick-Drying Enamel. tough film that resists moisture and NLI 0000-NLI-000020049 7 En a me l s Continued ... Satin Eggshell Enamel (500 Series): An odorless type, semi-gloss Nalkyd finish for interior use on walls, woodwork and cabi nets. Especially recommended for use on surfaces where water-resistance and fre quent washing are factors, as in kitchens, bathrooms and playrooms; also for use on cabinets, windows, woodwork and trim, for maximum resistance to soiling and wear. Made from Nalcolyn alkyd resins, an ex clusive product of "Dutch Boy" research. Easy to apply with brush or roller. Sets slowly and is therefore ideal for painting large surfaces. Dries smooth and hard to a subdued, uniform lustre. Its odorless sol vents result in no unpleasant, lingering odor. For specifications for use, see Description of Coats table, p. 26, opposite each index of coats containing the symbol E5. Available in same colors as "Dutch Boy" Wonsover, described under FLAT WALL PAINTS. Colors are keyed to har monize perfectly with each other as well as with Wonsover colors. In addition, beauti ful tints are available simply by mixing equal portions of standard "Dutch Boy" Satin Eggshell colors with Satin Eggshell 512-Off White. Interior Gloss Enamel (600 Series): A hard, high-gloss enamel finish for use on interior walls, ceilings, woodwork and trim. Provides a smooth, lustrous surface that holds its gloss and color despite water and washing. Comes ready to use; sets slowly and is easily applied on large surfaces. For specifications for use, see Description of Coats table, p. 26, opposite each index of coats containing the symbol E6. Comes in colors and white. Quick-Drying Enamel (700 Series): A fast drying, high gloss enamel designed for both practical and decorative use, indoors as well as out. For use on cabinets, woodwork, ornamental metal, fixtures and trim whereever bright color together with exceptional washability and resistance to wear and weather are desired. This top quality alkyd resin enamel is easy to apply with brush or spray; it levels itself and dries quickly to a smooth, hard, factory finish. Its film stands up for years despite repeated washing, hard usage and severe exposure, without appre ciable loss of gloss or color. For specifica tions for use, see Description of Coats table, p. 26, opposite each index of coats contain ing the symbol E4. Comes ready to use in a generous selection of colors; colors may be intermixed in any proportion, making available a variety to satisfy discriminating tastes. Also available in a flat, glare-free black. Fl a t w a l l p a in t s Wonsover (400 Series): A modern, odor less type, flat Nalkyd finish for interior walls and ceilings. Comes ready-mixed for use on plaster, wallboard, brick and con crete surfaces. Nalkyd Wonsover is made from Nalcolyn alkyd resins, an exclusive product of "Dutch Boy" research. Wons over is easy to apply with brush or roller, and results in a finish that is exceptionally smooth, tough, hard and washable. Its dense hiding power provides a solid cover ing which makes it possible to cover many dark or discolored surfaces with a single coat. Completely odorless solvents preclude any unpleasant, lingering odor. Dries rap idly ; the room can be put into service with out delay. Its hard film resist soiling, is easy to clean and can be washed repeatedly. Available in a full selection of beautiful colors; colors are keyed to harmonize per fectly with each other, as well as with the same colors in "Dutch Boy" Satin Eggshell Enamel, described above. Combinations harmonize beautifully with each other, too. 0000-NLI-000020050 8 Fl a t w a l l p a in t s Continued .. . 14 Na'i Colors also harmonize with most popular is easy to apply with brush or roller. Made colors used in rugs, drapery and uphol with odorless solvents; dries with no ling- stery. For specifications for use, see gering, unpleasant odor. Produces a Description of Coats table, p. 26, opposite smooth, pleasing, uniform finish with a each index of coats containing the symbol hard, impermeable film which resists soil Wl. ing and withstands the effects of hard us age, water and frequent washing. For speci fications for use, see Description of Coats 808 and 809 Flat Wall Enamel: A superb, table, p. 26, opposite each index of coats i alkyd resin flat finish coat for use on inte containing the symbol E7. Available in the rior walls of plaster, wallboard or wood. full range of 112 modern, appealing colors Provides a soft, glare-free finish together of the "Dutch Boy" Color Gallery. The with the practical utility of a tough, long- same colors are available in companion fin lasting, hardwearing, soil-resistant and ishes Satin Finish Enamel and High Lustre washable surface. Comes ready to use and Enamel, described on pp. 7-8, Pr ime r s 040 Wall Primer and Sealer: A highly ef face that can be easily sanded. May be ficient priming and sealing coat for interior tinted where necessary with "Dutch Boy" surfaces of plaster, wallboard, hardboard, Tinting Colors. Allow at least 24 hours be wood, brick, and concrete. Stops suction, fore sanding lightly and dusting clean. For seals firecracks and creates a uniform sur specifications for use, see Description of face which is suitable for the application of Coats table, p. 24, opposite each index of flat, semi-gloss or gloss wall finishes. White; coats containing the symbol P2. may be tinted with "Dutch Boy" Tinting Colors. For specifications for use, see 72-01 Primefast Sealer: An unusually fast Description of Coats table, p. 24, opposite drying, odorless type vinyl latex primer each index of coats containing the symbol and sealer for interior walls and ceilings. i PI. Allow one gallon for each 600 sq. ft. of For use on plaster, woodwork and all porous smooth plaster. surfaces, whether unpainted or previously finished. It bridges and seals fine cracks, 701 Enamel Undercoat: A finely ground effectively hides the under-surface, and pro white paint for interior use as an undercoat duces a uniform, low gloss foundation for for enamels, semi-gloss and gloss interior flat, semi-gloss and gloss finishes. Designed paints. For use on such surfaces as wood for quick recoating; makes it possible to work, cabinets and metal; also for use on complete a high quality two coat job in one porous surfaces such as plaster, to be ap day and may be used for this purpose in plied over a coat of "Dutch Boy" 040 Wall stead of "Dutch Boy" 040 Wall Primer and Primer and Sealer. One coat provides a Sealer. For specifications for use, see foundation but two or more assure the Description of Coats table, p. 26, opposite proper hiding and smoothness necessary each index of coats containing the symbol for a top quality finish. Due to its odorless P3. Color is white; if tinting towards finish solvents, it dries with no unpleasant odor. color is desired, use only water dispersed It levels out, fills in and dries to a hard sur poster colors. NLI 0000-NLI-000020051 9 ED LEAD PROTECTIVE PAINTS for STRUCTURAL METALS "Dutch Boy" red lead primer paints consti tute a complete and unique range of pro tective primer coatings for structural steel, most of which conform to the requirements of recognized specifications. In addition to the general purpose metal primer and paste red lead described below, the following red lead primers are available: 050 Metal Primer; 051 Semi Quick-Drying Pure Red Lead; 052 Quick-Drying Red Lead; 053 Full Linseed Oil--Pure Red Lead; 05U Red Lead Phenolic Primer; 055 Liquid Red Lead. These paints are formula-based on the acknowledged corrosion inhibitive pigment --red lead and provide maximum dried film thickness per application. Vehicles include alkyd, phenolic and other modern resins, as well as linseed and tung oils, each selected to meet certain conditions. The range makes available a variety of drying rates together with a choice of high gloss or low gloss fin ishes to meet every requirement. The "Dutch Boy" finish coat paints previously described are excellent topcoats and, when used with these red lead paints, provide systems with outstanding protective quali ties. Where unusual exposure conditions are involved, the writer of specifications may contact the nearest "Dutch Boy" office for technical assistance in selecting the cor rect primer or paint system. 030 Metal Primer: An effective rust inhibi tive primer for use as a first coat on any interior or exterior metal surface, includ ing structural steel, ornamental iron, metal roofs, gutters, leaders, fire escapes, metal sash, metal fences and railings, metal fix tures, etc. Contains "Dutch Boy" red lead, the acknowledged corrosion inhibitive pig ment, together with iron oxide in a raw lin seed oil-alkyd resin vehicle. Provides long, dependable protection against rust and de terioration. Comes ready to use and is easy to apply with brush, roller or sprayer. For specifications for use, see Description of Coats table, p. 24, opposite each index of coatings containing the symbol Ml. Dries to touch in 6 to 8 hours; offers an ideal sur face for subsequent painting; can be re coated in 16 hours. Color: reddish brown. Allow one gallon for 400 to 600 sq. ft., de pending upon condition of surface. Paste Red Lead: Pure red lead ground in linseed oil and suitable for mixing with proper vehicles. Produces a highly protec tive, economical primer paint for use on structural iron or steel. For formulas for mixing and specifications for use, see p. 30. |V| ISCELLANEOUS PRODUCTS 29-02 Ready-Mixed Aluminum Paint: A brilliant, high hiding, silvery metallic finish for interior and exterior surfaces. Provides long lasting protection. Comes ready for use as a finish coat on masonry such as brick, concrete, cement, etc.; also on metal surfaces such as structural or ornamental steel, galvanized metal, roofs, tanks, etc. All surfaces should be first suit ably primed: see specifications for use in Description of Coats table, p. 20, opposite each index of coats containing the symbol Al. Due to its high quality, this paint de livers leafing qualities equal to those of paste and vehicle packaged separately, without requiring the time and effort of mixing. Allow one gallon for 600 sq. ft. NLI 0000-NLI-000020052 Mis c e l l a n eo u s pr o d u c t s Continued ... No 24-56 Barn Paint: A specially formulated, long-lasting red barn paint, for general exterior use on wood and metal structures. May be used as its own primer on wood; metals, however, should be primed first with "Dutch Boy" red lead paint. For speci fications for use, see manufacturer's direc tions on label. Allow one gallon for 600 sq. ft. 23-22 Ground Color: A natural opaque undercoat to be used before graining when the subsequent finish coat is to be lighter than the present finish. Oil Wood Stain (23-00 Series): A group of rich, non-fading, simulated natural wood colors in oil, for use on new unfinished wood surfaces such as exterior and interior woodword, cabinets, plywood and floors. Colors penetrate deeply without raising the grain or forming streaks or laps. Uniform, full tones assure permanent beauty. Depth of tone can be controlled in application. May be finished with wax or "Dutch Boy" Var nish. For specifications for use, see Descrip tion of Coats table, p. 26, opposite each in dex of coats containing the symbol SI. 23-11 Paste Wood Filler: A heavy paste, requiring reduction, for use in filling and sealing the pores of open grained woods such as oak, walnut or mahogany. Provides a firm, smooth foundation which is ready for subsequent coats. May be tinted with "Dutch Boy" Tinting Colors or "Dutch Boy" Oil Wood Stains. Varnish Stain (23-00 Series): A selection of high quality stains with remarkable depth of tone combined with a tough, bril liant varnish. For use on all kinds of interior woodwork, trim, floors, etc. Rec ommended for renewing the finish and con cealing scratches and blemishes on old, worn woodwork. Dries in a few hours with a beautiful lustre that is highly durable. Tinting Colors: A full range of the finest colors, finely ground and highly concen trated in a pure, quick-dispersing alkyd resin solution. For use in tinting paints, enamels, and lacquers. Colors mix in quickly and completely without streaking or lumping. 29-90 Screen Enamel: A high quality exte rior enamel for use as a one-coat system on screen wire mesh of all kinds, as well as for use as a finish coat on the wood and steel frames of screens. Protects screens against rusting and oxidizing; prevents metal staining of adjacent surfaces; adds dura bility to the screen. Its smooth, hard sur face resists wear and weather, sheds dirt, and will not damage curtains or drapes which touch the screen. Easily applied with a conventional screen applicator or stiff brush; will not clog fine wire mesh. For specifications for use, see Description of Coats table, p. 20, opposite each index of coats containing the symbol E5. Non-bleed ing ; contains no water-soluble extractives. Comes in high-gloss black. NLI 0000-NLI-000020053 11 INTERIOR STRUCTURAL MATERIAL PLASTER. WALLBOARD AND OTHER PROCESSED PANELS FABRIC ma s o n r y : BRICK CONCRETE CEMENT WOOD: (ALL SPECIESSOLIDS OR PLYWOODS) ITEM Walls, Ceilings Concrete or Cement Floors and Dadoes as in Basements, Laundries, Garages. Kitchens, Corridors, Etc. Doors, Windows, Base, Chair Rail, Trim, Mouldings, Paneling, Plywood, Room Dividers, Closets, Cabinets CONDITIONS TO BE MET RECOMMENDED FINISH All normal living or working conditions, including moisture from within rooms and frequent washing of walls, as in kitchens, bathrooms, etc. Gloss Enamel (White or Color) Semi-Gloss Enamel (White or Color) Flat Enamel (White or Color) Living conditions as in living rooms, bedrooms, corridors, working areas, etc. Flat Paint (White or Color) Where an architectural white enamel finish is desired Gloss Enamel (White) Semi-Gloss Enamel (White) Where resistance to alkali, acids, water, steam,grease, fumes and mildew is desired Gloss Rubber Base Paint (Color) All normal living or working conditions, including moisture from within the room and frequent washing of woodwork Where an architectural white enamel finish is desired Gloss Enamel (White or Color) Semi-Gloss Enamel (White or Color) Flat Enamel (White or Color) Gloss Enamel (White) Semi-Gloss Enamel (White) Where a natural or stained varnish* finish is desired Gloss Varnish (Natural or Stained) Semi-Gloss Varnish (Natural or Stained) Where an architectural finish is desired, such as picketed natural, bleached, etc. See note opposite NO. OF COATS INDEX OF COATINGS New Surfaces or Surfaces Previously Previously Finished in Finished In Poor Condition Good Condition DESCRIPTION | OF COATS PAGE PI P2 E3 Alt: PI P2 E6 PI P2 E8 Alt: PI P2 E5 PI Pi E7 PI W1 P2 E3 P2 E8 Alt: P2 E5 E7 24 26 26 26 PI P2 E9 PI P2 El P2 E9 P2 El Cl P2 P2/E3 E3 Alt: P2 P2/E6 E6 P2 E3 Alt: P2 E6 P2 E8 E8 Alt: P2 E5 E5 Alt: P2 E5 P2 E8 PI P2 E7 P2 E7 P2 P2/E9 P2 E3 Alt: P2 E6 P2 E8 Alt. P2 E5 P2 E7 P2 El El P2 El V3 V3 V3 (If to be filled and stained: FI SI V3 V3) V3 V3 V4 (If to be filled and stained: Fi Si V3 V4) V3 V3 Due to number of special effects available and various methods of attaining them, the desired finish should be first visualized in samples provided by the contractor, then specified 24 26 26 26 24 26 26 26 26 0000-NLI-000020054 7- :.'-iaV*-h r ' 'U-'irzg ppg "l- ;v INTERIOR continued.'.) .. ^y. - - =5* -****** J- 4- -fcSS.ff,:- r-. .... Ji^i'jK^ MfiBftf?c3i*r v.:4*aJ* FV :~<-3 INTERIOR STRUCTURAL MATERIAL ITEM CONDITIONS TO BE MET Built-In Furniture wood: (ALL SPECIES SOLIDS OR PLYWOODS) Continued... Where easy cleaning, excellent washability, and resistance to water, heat, soiling and wear are desired in an enamel or varnish finish Where a natural or stained varnish finish is desired Floors, Stairs, Treads, Risers, Where a floor enamel finish in Platforms, Railings and Handrails color is desired Where a natural or stained varnish finish is desired for a partially exposed floor METAL f KISUZ Where a protective primer together with a suitable finish coat is desired Ductwork, Metal Ceilings, Ladders, Gratings, Pit Covers, Exposed Piping, Exposed Struc tural Steel, Exposed Conduits and Boxes, Radiators, Radiator Enclosures, Grills, Towers, Doors, Bucks, Windows, Trim, Partitions, Lockers, Cabinets, Shelves, Base, Chair Rails, Mouldings, Machinery, Motors, Metal Stacks, Breeching, Hot Metal Surfaces Where no protective primer is needed Where an aluminum finish is desired Where a bright decorative gloss enamel finish is desired Iron Stairs, Treads, Risers, Platforms, Railings, Handrails Where a protective primer together with a floor enamel finish coat is desired; or, two enamel coats without primer RECOMMENDEO FINISH Gloss Enamel (White or Color) Semi-Gloss Enamel (White or Color) Gloss Varnish (Natural or Stained) Semi-Gloss Varnish (Natural or Stained) Gloss Varnish (Natural or Stained) Gloss Enamel (Color) HO. OF COATS INDEX OF COATINSS New Surfaces or Surfaces Previously Previously Finished in Finished In Peer Condition Good Condition DESCRIPTION OF COATS PACE 3 P2 P2/E4 E4 2 P2 E4 3 P2 E8 E8 2 P2 E8 3-4 V3 V3 V3 (If to be filled and stained: FI SI V3 V3) 2 V3 V3 3-4 V3 V3 V4 (If to be filled and stained: FI Si V3 V4) 2 V3 V4 3-4 V3 V3 V3 (If to be filled and stained: FI Si V3 V3} 2 V3 V3 2 E2 E2 E2 E2 26 26 26 26 26 26 26 26 26 26 24 Gloss Varnish (Natural or Stained) Gloss Enamel (White or Color) Semi-Gloss Enamel (White or Color) Flat Enamel (White or Color) Gloss Enamel (White or Color) Semi-Gloss Enamel (White or Color) Flat Enamel (White or Color) Metallic Paint (Aluminum) Gloss Enamel (White or Color) Gloss Enamel (Color) 3-4 V2 V2 V2 (if to be filled and stained: FI SI V2 V2) 2 V2 V2 3 Ml P2 E3 Alt: Ml P2 E6 3 Ml P2 E8 Alt: Ml P2 E5 3 Ml P2 E7 3 P2 P2/E3 E3 Alt: P2 P2/E6 E6 2 P2 E3 Alt: P2 E6 3 P2 E8 E8 Alt: P2 E5 E5 2 2 P2 E7 1 2 Ml A1 1 3 P2 P2/E4 E4 2 P2 E3 Alt: P2 E6 P2 E8 Alt: P2 E5 E7 A1 P2 E4 3 Ml E2 E2 2 E2 E2 E2 E2 26 26 24 24 24 26 26 26 26 26 24 24 24 26 26 24 24 NLI Sfe i?JMMMi Wa* 1 I.j*5 52TmmTm4 fe`; .-H * * 0000-N LI-000020055 j^p 7, . 'ry^.;v r-- x e of coatings EXTERIOR ^ .,, ,, Aa Index of Paint Systems for Homes, Offices, Stares, Schools, Factories, Etc. ~ ^ -5 .- ' w ~ **<!*, > ~ .Os* Sskv Z&mL ' r t-mt - INDEX OF COATINGS New Surfaces er Surfaces Previously DESCRIPTI EXTERIOR STRUCTURAL CONDITIONS RECOMMENDED NO. OF Previously Finished in Finished In OF COAT MATERIAL ITEM TO BE MET FINISH COATS Poor Condition Good Condition PAGE Large Fences, Siding, Wall Shingles, Exposed Timbers, Overhangs Normal atmospheric conditions Gloss Paint (White) Gloss Paint (Color) Gloss Pure Lead Paint (White) Gloss Pure Lead Paint (Color) HI H2 H2 HI H2 HI H5 HS Alt: HI H3 H3 (tinted) HI H5 Ait: HI H3 (tinted) H9 H9 H9 H8 H9 H9 H9 H9 (tinted) H8 H9 (tinted) H2 H2 H5 H5', Alt: H3 H3 (tinted) H8 H9 (tinted) 20 20 20 20 22 20 22 22 22 22 wood: (ALL SPECIES SOLIDS OR PLYWOOOS) Where white is desired in an industrial atmosphere or where mildew is prevalent Gloss Paint (White) H4 H4 H4 22 20 Windows, Doors, Storm Sash, Trim, Shutters, Railings, Screen Frames, Trellis, Fences, Posts, Soffits, Cornices, Store Fronts Stairs, Railings, Platforms, Porch Floors, Sundecks MASONRY*. CONCRETE, 8RICK. STONE, STUCCO Siding, Concrete Wails, Soffits, Spandrels, Cinder Blocks, Concrete Blocs, Asbestos Cement Shingles Floors, Steps, Decks, Porches, Concrete Walks, Patio Floors, Dadoes Where white is desired above brick, stone, stucco or non-white surfaces Any atmospheric condition Any atmospheric condition Any atmospheric condition; alkaline surface; where water proofing action is desired Any atmospheric condition; alkaline surface; foot traffic; severe service Gloss Paint (White) Gloss Pure Lead Paint (White) Gloss Paint (White or Color) Gloss Varnish (Natural or Stained) 3*4 2 Gloss Enamel Gloss Varnish (Natural or Stained) 3-4 2 Fiat Rubber Base Paint (White or Color) Gloss Rubber Base Paint (Color) H9 H9 H9 H8 H9 HI H3 H3 HI H3 HI H6 HI H3 VI VI VI (if to be stained: SI VI VI VI) HI E2 E2 HI E2 VI VI VI (if to be filled and stained: FI Si Vi VI) E2 E2 Cl Cl Cl 22 22 20 20 20 22 22 22 20 20 22 22 22 22 METAL! STEEL, GALVANIZED IRON, WROUGHT IRON, ETC. Gutters, Leaders, Stairs, Fire Escapes, Railings, Fences, Ornamental Work, Gratings Grills, iron Covers, Doors, Windows, Trim, Skylights, Pipes, Fittings, Ladders, Hardware, Tanks, Smokestacks, Hot Metal Surfaces, Boilers, Breeching,Corrugated or Similar Walks and Roofs, Vent Stacks,Metal Housings Normal atmospheric conditions.(For special conditions, see description of "Dutch Boy" Metal Protective Paints, page 10) Aluminum Paint Gloss Paint (White or Color) Gloss Enamel (Color) 2*1 Ml Ml A1 Ml A1 Ml HI H2 (H3.H4. H5,H6 or H9 may be substituted for H2) Ml Ml E2 A1 H2 H2 (H3, H4.H5.H6 or H9 may be substituted for H2) E2 E2 22 20 Wire Screens Any atmospheric condition Gloss Enamel (Black) E5 0000-NLI-000020056 "DUTCH BOT" PRODUCTS *1 - 29-02 (*& Shaateaw Ml St = taacrita FtearFatet.......... t! = ParcS ft Flaar taaawl __________ El = IMS (cram Eu mI .. FI =22-11 tail Was* Filter ......... 1 = tent Fatat (IS Frtewr ......... M2 - item Faiat 118 Sr*kt Mil* .... NT =Nmh Faint m Steal WWta ..... M - Sana Faiat 11( Faan aaa nilisw 14 "DUTCH BOY" PRODUCTS . 18 M = Null Fatet la Cater .. . S M = Sart 2 Trial ............... . I 7 = ternary Fatal ........... ,11 as = 11 nita LaaS Frtewr , 11 as = lis toils LaaS Fatet . . S *1 =SSS I . 3 SI = Oil ' . .2 VI = TOSS IxL Martas 4* TarataS .3 FraFact BascrttaF pw., , , 5 - * -., ^' -S>^ - _ .a ?-':" 'SgK}-JSt ^s-sr^ >*- * sW*: * ggested form &T' of standard painting specifications for use by ARCHITECTS ENGINEERS CONTRACTORS z4. wtrftm IMPORTANT NOTE TO WRITER: In every instance where this specifications form is used in con junction with the specifying of "Dutch Boy" Paints, Enamels and Varnishes, the Description of Coats table, pp. 20-26, should accompany the specifications. For your convenience, and to assure that the contractor follows your instructions, extra copies of the Description of Coats table are available for attaching to specifications. Address your request to: Na tional Lead Company, 111 Broadway, New York 6, New York (Room 1815). To key this form of painting specifications to any general building specifications, place before each hyphenated num ber the number assigned to the painting section of the build ing specifications. If the number "29" were assigned to the painting section, for example, that number would be placed before each hyphenated number, viz. 29-0 J, 29-02, etc. Standard Painting Specifications -01 INSTRUCTIONS TO BIDDERS The general conditions and instruction to bidders as applied on the general contract shall apply to the painting contract with equal force. - 02 INSURANCE The painting contractor shall carry liabili ty insurance and workmen's compensation for all workmen on his payroll. The paint- ing contractor agrees to protect the general contractor from all liens or damages aris ing from or caused by his work. -03 SCOPE OF WORK The work to be done by the painting con tractor shall include the furnishing of all material, labor, tools and equipment re- quired to complete the painting and finish ing of building (s) as specified. - 04 GENERAL The painting contractor shall be completely responsible for the finish of his work and shall take all necessary steps, whether speci- fled herein or not, to obtain and protect the required finish until final acceptance by the architect. - 05 MATERIALS All materials used under painting contract shall be as manufactured by National Lead Company, except where this specification calls for a non-"Dutch Boy" coating of Fed eral specification or its equivalent, or other approved coating. All materials shall be delivered on the job in the original sealed containers. All materials to be used as specified by the manufacturer's label on the package. All unspecified brands of materials, such as shellac, linseed oil, turpentine or thinners are to be pure and of the highest quality obtainable, and shall bear the manufacturer's-label on each container or package. If the contractor desires to use materials of manufacturers other than specified, he must accompany his bid with a written re quest to substitute specific products of other manufacturers. This request to list each item specified, by manufacturer's name and brand; and the brand and manufacturer's name of each item to be substituted. This list to also state the price per gallon of each item and where a saving in cost is indicated the amount of saving to be deducted from the base bid. After award of the contract no substitution of materials will be permitted. All mixing required shall be done on premises, and materials shall be thoroughly stirred. No materials shall be reduced or changed in any way except as specified. - 06 COLOR All colors shall be subject to the approval of the Owner, Architect or Engineer. Tint ing or matching of colors shall be done un der the supervision of the Architect. In all cases a sample shall be applied on the job and the Architect must give his approval of it before work is begun. If required, three panels of each color and finish shall be pre pared in advance, with the materials speci fied, for the approval of the Architect or Engineer. "Of color selected" shall be understood of all coats specified herein. Where the final coat is to be a color, the preceding coat or coats should be tinted towards the finish color, using "Dutch Boy" Tinting Colors except where indicated to the contrary. Each coat shall have a slight variation of color to distinguish it from the preceding coat. NLI 0000-NLI-000020058 07 GENERAL If the painting contractor considers any surface not his responsibility unsuitable for proper finish of his work, he shall notify the Architect of this fact in writing and he shall not apply any material until the un suitable surfaces have been made satisfac tory, or the Architect has instructed him to proceed. All knots or sappy spots shall be given one coat of shellac before painting. All nec essary puttying of nail holes, cracks and blemishes shall be done after priming coat has become hard and dry and before second coat is applied. On old paint the surface shall be first brushed with a wire brush or sandpapered and where it is scaling badly, shall be scraped or burned off. All greasy or oily metal surfaces shall be cleaned with solvent before applying any materials. All scale or rust shall be removed by scraping or wire brushing. All work shall be done in a workmanlike manner by skilled mechanics. All materials shall be properly applied, leaving the fin ished surfaces free from drops, ridges, waves, laps and excessive brush marks. No paint, enamel or varnish shall be applied until preceding coat is thoroughly dry and hard. No exterior painting shall be done in rainy or damp whether, and until surface is thoroughly dry. No paint shall be applied when the temperature is below 50 F or when the temperature is over 90 F. No interior painting or finishing shall be permitted until building has been thor oughly dried out. Hardware, hardware ac cessories, plates, lighting fixtures and simi lar items shall be removed during painting operations and repositioned upon comple tion of each space, or shall be otherwise protected. In general and unless otherwise specified, exterior oil paints shall be allowed to dry at least 48 hours between coats and interior paints shall be allowed to dry at least 24 hours between coats. Enamels and varnishes shall be allowed to dry at least 48 hours between coats un less noted in the detail specifications and shall be sanded lightly between coats with No. 00 sandpaper and dusted before suc ceeding coat is applied. Paints shall be thoroughly stirred and kept at a uniform consistency during application and shall not be thinned in excess of the printed di rections of the manufacturer. After apply ing paste wood fillers, excess shall be care fully and neatly cleaned from surface by rubbing across grain. All nail holes shall be filled with putty or other approved filler, tinted to match finish. Floors, roofs and other adjacent work shall be properly protected by drop cloths or other coverings. 08 CONCRETE, STUCCO AND MASONRY Concrete, stucco, and masonry surfaces to be painted shall be prepared by removing all dirt, dust, oil and grease stains, and efflorescence, and by roughening, when necessary, to provide good adhesion for the paint. The method of surface preparation shall be left to the discretion of the con tractor, provided the results are satisfac tory to the Architect or Engineer. Concrete or cement floors and other masonry sur faces to be painted with rubber base or oil base paints shall be free from excessive alkali and shall be thoroughly dry before paint is applied. Rubber base paint shall be applied with a short bristle brush. Surfaces to be painted with cement-water paint shall be thoroughly dampened with a fine spray of water before application of the paint. The paint shall not be applied on a frozen or frost-covered surface. The interval be tween coats shall be not less than 24 hours, and the first coat shall be slightly damp ened before application of the second coat. The paint shall be applied with a stiff brush, and thoroughly worked into the surface to seal all pores, cracks, and voids. The paint shall be cured by wetting the surface be tween coats, and at intervals for a period of not less than 2 days after the application of the finish coat. Nails and similar exposed metal occurring in concrete, or masonry surfaces shall be coated with shellac or oil paint before the cement-water paint is applied. NLI 0000-NLI-000020059 17 Reparation continued ... Standard Painting Specifications METALWORK Shop-primed metalwork shall be kept clean and free from corrosion following installa tion. Abraded surfaces shall be retouched prior to finish painting, using the same type of paint as the priming coat. PLASTERWORK Plasterwork shall be at least 2 months old and shall be thoroughly dry, clean, and free from grit, loose plaster, and surface irregu larities before paint is applied. Cracks and holes shall be repaired with patching plas ter, properly keyed to the existing plaster, and sand-papered smooth. All plaster sur- faces shall be tested for the presence of al kali, which, if present, shall be neutralized with a solution of zinc sulphate mixed in the proportion of 21/2 to 3 pounds to a gal lon water. After drying, the precipitate shall be removed by dry brushing. 11 WOODWORK All millwork and all other woodwork, where required, shall be sandpapered before ap plication of the primer. Small, dry, sea soned knots shall be thoroughly cleaned and scraped, and shall be given a thin coat of orange shellac varnish before the prim ing coat is applied. Previous to shellacking, large, open, unseasoned knots and all beads or streaks of pitch shall be heated by a 1. Priming: All millwork specified to be painted shall be primed on all sides before installation, with particular attention be- 2. Puttying and Glazing: After the prim ing coat has been applied, nail holes, cracks, and other depressions shall be filled flush with putty, colored to match the finish coat, and sandpapered smooth. Putty shall be dry blowtorch and then scraped off, or if the pitch is still soft, it shall be removed with mineral spirits or denatured alcohol. Re sulting voids, if any, shall be filled with putty. Nails shall be set. Painting shall pro ceed only when, in the opinion of the Archi tect or Engineer, the wood is satisfactorily dry. ing given to the sealing of cross-grained surfaces. Woodwork other than millwork shall be primed on exposed surfaces only. before subsequent painting. Glazing rab bets and beads in exterior glazed sash and doors shall be given 1 coat of exteriorprimer paint before glazing. 12 CLEANING All cloths and cotton waste which might constitute a fire hazard shall be placed in metal containers or destroyed at the end of each work day. Upon completion of the work, all staging, scaffolding, and contain ers shall be removed from the site or destroyed in a manner approved by the Engineer. Paint spots, oil, or stains upon adjacent surfaces shall be removed and the entire job left clean and acceptable to the Architect or Engineer. 13 EXTRAS No extras should be performed without written instructions from the Architect or the Engineer. NLI 0000-NLI-000020060 18 14 INSPECTION Every facility shall be provided for inspection of work by the Architect or Engineer, at any time. Any work not conforming to these specifications shall be cleaned off and repainted at the expense of the contractor, 15 PAYMENT No separate payment will be made for the work covered under this section and all costs in connection therewith shall be in cluded in the lump-sum contract price for the entire work to be performed under this contract. r^)ecification of coats awfaffirTPi* iiri.iitf 16 GENERAL A. All surfaces to be painted are listed un der "Item" in the Schedule of Coats. Each item to be painted shall be painted with the coatings represented by the in dex symbols which appear opposite the item in the Schedule. Each index symbol refers to the particular system of coats described in the Description of Coats table. Thus, every item to be painted shall be painted with the products and in the manner specified opposite the ref erence index symbols in the Description of Coats table. B. The Description of Coats table shall be considered an integral part of these specifications. C. Items for which painting is not indicated shall not be painted unless otherwise directed by the Architect or Engineer. -17 DESCRIPTION OF COATS The following table is the key to the Sched ule of Coats, pp. 28-29; as such it should accompany any painting specifications based on the present Suggested Form of Standard Painting Specifications. Extra copies of this table are available for attach ing to specifications. Address requests to: National Lead Company, 111 Broadway, New York 6, N. Y. NLI 0000-NLI-000020061 19 INDEX OF COATINGS A1 Cl Cl Cl E2 E2 E5 FI SI VI VI HI E2 HI E2 E2 HI E2 HI H2 H2 HI H3 HI H3 (tinted) HI H3 H3 Hi H3 H3 (tinted) HI H5 HI HS H5 HI H6 H2 H2 1 H3 H3 1 H3 H3 (tinted) H4 H4 FIRST COAT 29*02 Ready-Mixed Aluminum Paint Concrete Floor Paint Concrete Floor Paint Porch and Floor Enamel (300 Series) 29-90 Screen Enamel 23-11 Paste Wood Filler H.P. 010 Primer H P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 010 Primer H.P. 110 Bright White H.P. Ill Gloss White H.P. Ill Gloss White H.P. 115 Fume & Mildew Resistant White 20 EXTERIOR TITLE AND APPLICATION REDUCTION SECOND COAT If necessary, up to Put not more than % pint of turp. or min. spirits per gal. None 1 pint turp. per. gat. Concrete Floor Paint 1 pint turp. or min. spirits per gal. Porch and Floor Enamel (300 Series) Small amount turp. or min. spirits, if necessary None Oil Wood Stain (23-00 Series) None Porch and Floor Enamel (300 Series) None None None None None None None Porch and Floor Enamel (300 Series) H.P. 110 Bright White H.P. 110 Bright White H.P. Ill Gloss White H.P 111 Gloss White (tinted) H.P. Ill Gloss White H.P. Ill Gloss White None None None 1 pint turp. or min. spirits per gai. 1 pint turp. or min. spirits per gal. 1 pint turp. or min. spirits per gal. 1 pint turp. or min. spirits per gal. House Paint in Color (100 Series) House Paint in Color (100 Series) Sash and Trim (200 Series) H.P. 110 Bright White H.P. Ill Gloss White H.P. Ill Gloss White (tinted) House Paint in Color (100 Series) I\LI 0000-NLI-000020062 Standard Painting Specifications OF/#DUTCH BOY^pk o d u c t s REDUCTION THIRD COAT 1 t * None None REDUCTION NOTES 14 Nai Do not add oil or tinting colors to this product or mix with other types of paint; allow first coat to dry overnight None None 1 pint turp. or min. spirits per gal. None -- 1 pint turp. or min. spirits per gal. None None 1 pint turp. or min. spirits per gal. 1 pint turp. or min. spirits per gal. 1 None ) 1 pint turp. or min. spirits per gal. None None None -- None None 70-00 Ext. Marine Spar Varnish Porch and Floor Enamel (300 Series) H.P. 110 Bright White None None None 4th Coat: Same as Third Coat, without reduction H.P. Ill Gloss White H.P, 111 Gloss White (tinted) House Paint in Color (100 Series) None None None Three to five days of good drying weother should be allowed when using H.P. 010 Primer For very porous areas, raw linseed oil may also be added to first coat, in amounts up to one pint per gal. NLI 0000-NLI-000020063 21 INDEX OF COATINGS H4 H4 H4 H5 H5 ion of coats table j Standard Painting Specifications EXTERIOR Continued... TITLE AND APPLICATION FIRST COAT REDUCTION SECOND COAT H P. ii5 Fume & Mildew Resistant White 1 pint turp. or min. spirits per gal. and 1 pint linseed oil per gal. H.P. 115 Fume & Mildew Resistant White House Paint in Color (100 Series) 1 pint turp, or min. spirits per gal. House Paint in Color (100 Series) H6 H7 H7 H7 H8 H9 H8 H9 {tinted} H9 H9 H9 H9 H9 H9 (tinted) Ml A1 Ml HI H2 , (H3,H4,H5,H6 or H9 may be substituted for H2) Sash and Trim (200 Series) Masonry Paint Masonry Paint Oil Pure White Lead Ext. Primer Oil Pure White Lead Ext. Primer 116 Pure White Lead Paint 116 Pure White Lead Paint 030 Metal Primer (Red Lead Base) 030 Metal Primer (Red Lead Base) None If thinner is necessary, use turp. in small amounts 1 pint "Dutch Boy" Masonry Paint Reducer per gal. Masonry Paint None 116 Pure White Lead Paint None 2 pints turp. or min. spirits and 1 pint linseed oil per gal. 116 Pure White Lead Paint (tinted) 116 Pure White Lead Paint 2 pints turp. or min. spirits and 1 pint linseed oil per gal. 116 Pure White Lead Paint If necessary, up to but not more than 4 pint of turp. or min. spirits per gal. If necessary, up to but not more than 34 pint of turp. or min. spirits per gal. 29-02 Ready-Mixed Aluminum Paint H P. 010 Primer i Ml Ml A1 Ml Ml E2 SI VI VI VI VI VI VI VI VI 22 030 Metal Primer (Red Lead Base) 030 Metal Primer (Red Lead Base) Oil Wood Stain (23-00 Series) 70*00 Ext. Marine Spar Varnish 70*00 Ext. Marine Spar Varnish If necessary, up to but not more than 34 pint of turp. or min. spirits per gal. If necessary, up to but no more than 4 pint of turp. or min. spirits per gal. None 030 Metal Primer (Rec Leal Base) 030 Metal Primer (Red Lead Base) 70-00 Ext. Marine Spar Varnish Reduce slightly with turp. if necessary 1 pint turp. per gal. 70-00 Ext. Marine Spar Varnish 70-00 Ext. Marine Spar Varnish NLI 0000-NLI-000020064 o f "DUTCH BO Y//PRODUCT5 REDUCTION THIRD COAT 1 pint turp. or min. spirits per gal. T| None H.P. 115 Fume and Mildew Resistant White REDUCTION None NOTES 14 Nat For very porous areas, raw linseed oil may also be added to first coat, in amounts up to one pint per gal. None None None 1 pint turp. or min. spirits per gal. 1 pint turp. or min. spirits per gal. -- If necessary, up to but not more than V* pint of turp. or min. spirits per gal. None If necessary, up to but not more than Vx pint of turp. or min. spirits per gal. If necessary, up to but not more than Vx pint of turp. or min. spirits per gal. None None None For use on surfaces previously finished in oil type paint in good condition, color should be similar to that of previous finish; do not add oil or tinting colors or mix other types of paint with this product 116 Pure White Lead Paint 116 Pure White Lead Paint (tinted) None None H.P. 110 Bright White (or H.P. 111 Gloss White; H.P. 115 Fume and Mildew Resistant White; House Paint in Color; Sash and Trim; 116 Pure White Lead Paint) 29-02 Ready-Mixed Aluminum Paint Porch and Floor Enamel (300 Series) 70-00 Ext. Marine Spar Varnish None None None None All wood to be back primed shall receive one coat of Oil Pure White Lead Ext. Primer On repaint work, first spot prime any bare areas, allow to dry and then apply a primer coat to the entire surface Exposed exterior metals should be painted and back primed to prevent possible discoloration of painted surfaces Three to five days of good drying weather should be allowed when using H.P. 010 Primer 4th Coat: Same as Third Coat, without reduction 70-00 Ext. Marine Spar Varnish None NLI 0000-NLI-000020065 23 jcri] INDEX OF COATINGS At Cl Cl Cl 12 E2 E7 FI SI V2 V2 Ft St V3 V3 Ft SI V3 V4 Ml A1 Ml E2 E2 Ml P2 E3 Ml P2 E5 Ml n E6 Ml P2 E7 Ml P2 EB PI PI E7 PI P2 Et PI P2 E3 PI P2 E5 PI P2 E6 PI P2 E7 1 PI P2 EB I PI P2 E9 I 24 INTERIOR FIRST COAT 29-02 Ready-Mixed Aluminum Paint Concrete Floor Paint Concrete Floor Paint Porch and Floor Enamel (300 Series) Flat Wall Enamel 23-11 Paste Wood Filler 23-11 Paste Wood Filler 23-11 Paste Wood Filler 030 Metal Primer (Red Lead Base) 030 Metal Primer (Red Lead Base) 030 Metal Primer-(Red Lead Base) 030 Metal Primer (Red Lead Base) 030 Metal Primer (Red Lead Base) 030 Metal Primer (Red Lead Base) 030 Metal Primer (Red Lead Base) 040 Wall Primer and Sealer 040 Wall Primer and Sealer 040 Wall Primer and Sealer 040 Wall Primer and Sealer 040 Wall Primer and Sealer 040 Wall Primer and Sealer 040 Wall Primer and Sealer 040 Wall Primer and Sealer REDUCTION Nona TITLE AND APPLICATION SECOND COAT None 1 pint turp. per gallon 1 pint turp. or min. spirits per gal. None None None None If necessary, up to Put not more than % pint of turp. or min. spirits per gal. If necessary, up to Put not more than % pint of turp. or min. spirits per gal. None If necessary, up to but not more than % pint of turp. or min. spirits per gal. If necessary, up to but not more than V pint of turp. or min. spirits per gal. If necessary, up to but not more than % pint of turp. or min. spirits per gal. If necessary, up to but not more than V4 pint of turp. or min. spirits per gal. None None Concrete Floor Paint Porch and Floor Enamel (300 Series) Oil Wood Stain (23-00 Series) Oil Wood Stain (23-00 Series) Oil Wood Stain (23-00 Series) 29-02 Ready-Mixed Aluminum Paint Porch and Floor Enamel (300 Series) 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 040 Wall Primer and Sealer 701 Enamel Undercoat None None 701 Enamel Undercoat 701 Enamel Undercoat None 701 Enamel Undercoat None None None 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat n TTT 0000-NLI-000020066 m Standard Painting Specifications "DUTCHo f BOY#/p r o d u c t s REDUCTION THIRD COAT REDUCTION None None None None None None 1 pint turp. or min. spirits per gal. None None None None None None None None None None None None None """ 70-02 Interior-Exterior Spar Varnish 70-10 Interior Floor and Trim Gloss Varnish 70-10 Interior Floor and Trim Gloss Varnish None None None Porch and Floor Enamel (300 Series) High Lustre Enamel Satin Eggshell Enamel (600 Series) Interior Gloss Enamel (600 Series) Flat Wall Enamel Satin Finish Enamel Flat Wall Enamel Sparkling White Enamel (11-15 Velvet Sheen) High Lustre Enamel Satin Eggshell Enamel (500 Series) Interior Gloss Enamel (600 Series) Fiat Wall Enamel Satin Finish Enamel Sparkling White Enamel (715 Gloss) 1 None None None None None None None None None None None NLI 14 Na NOTES Do not add oil or tinting colors to this product or mix with other typer of paint. Allow first coat to dry overnight 4th Coat: Same as Third Coat 4th Coat: Same as Third Coat 4th Coat: 70-20 Interior Satin Finish Varnish, without reduction uuuu-rN H-000020067 H ' .r. inscription of coats table 1 Standard Painting Specifications INTERIOR Continued. INDEX OF COATINGS PI W1 P2 El P2 El El P2 E3 P2 E4 P2 E5 P2 E5 E5 P2 E6 P2 E7 P2 E8 P2 E8 EB P2 E9 P2 P2 E3 E3 P2 P2 E4 E4 FIRST COAT 040 Wall Primer and Sealer 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat 701 Enamel Undercoat REDUCTION None None None None None None None None None None None None None None TITLE AND APPLICATION SECOND COAT Wonsover (400 Series) Sparkling White Enamel (11-15 Velvet-Sheen) Sparkling White Enamel (11-15 Velvet-Sheen) High Lustre Enamel Quick-Drying Enamel (700 Series) Satin Eggshell Enamel (500 Series) Satin Eggshell Enamel (500 Series) interior Gloss Enamel (600 Series) Flat Wall Enamel Satin Finish Enamel Satin Finish Enamel Sparkling White Enamel (715 Gloss) P2 P2 E6 E6 701 Enamel Undercoat None equal parts with the finish coat enamel P2 P2 E9 E9 701 Enamel Undercoat None P3 (See note) 72-01 Primefast Sealer None SI V2 V2 V2 SI V3 V3 V3 SI V3 V3 V4 Oil Wood Stain (23-00 Series) Oil Wood Stain (23-00 Series) Oil Wood Stain (23-00 Series) None None None 70-02 Interior-Exterior Spar Varnish 70-10 Interior Floor and Trim Gloss Varnish 70-10 Interior Floor and Trim Gloss Varnish V2 V2 V3 V3 I V3 V4 1 W1 70-02 Interior-Exterior Spar Varnish 70-10 Interior Floor and Trim Gloss Varnish 70-10 Interior Floor and Trim Gloss Varnish Wonsover (400 Series) Small amount of turp. if necessary None None 70-02 Interior-Exterior Spar Varnish 70-10 Interior Floor and Trim Gloss Varnish 70-20 Interior Satin Finish Varnish None 0000-NLI-000020068 o f "DUTCH BOY^PRODUCTS REDUCTION THIRO COAT None None None None None None Vi pint turp. or min. spirits,per gal. None None None V2 pint turp. or min. spirits per gai. None None Sparkling White Enamel (11*15 Velvet Sheen) Satirr Eggshell Enamel (500 Series) Satin Finish Enamel High Lustre Enamel Quick-Drying Enamel (700 Series) Interior Gloss Enamel (600 Series) Sparkling White Enamel (715 Gloss) 1 pint turp. per ga!. None None None None None 70-02 Interior-Exterior Spar Varnish 70-10 Interior Floor and Trim Gloss Varnish 70*10 Interior Floor and Trim Gloss Varnish REDUCTION 14 Nat NOTES None None None None None None None None None nl t 72-01 Primefast Sealer may be substituted for 040 Wall Primer and Sealer whenever second coat application on same day is desired 4th Coat: Same as Third Coat 4th Coat: Same as*Third Coat 4th Coat: 70*20 Interior Satin Finish Varnish without reduction. This may be intermixed with the Floor & Trim Gloss Varnish to obtain any intermediate degree of gloss desired * 2nd Coat: Interior Floor and Trim Gloss Varnish may be intermixed with the Satin Finish Varnish to obtain any intermediate degree of gloss desired 0000-NLI-000020069 27 ____ -18 TYPE OF COATS The type of coats to be applied to the indi cated items shall conform with the follow ing schedule. Index symbols refer to the Description of Coats table, section --17, Directions to Writer of Specifications: To determine the recommended coatings for each item to be painted, refer to the Table of Coatings, p. 12 ff. To specify, draw up a Schedule of Coats form based on the examples shotvn below, listing all items to be painted. Then, opposite each item, fill in the index symbols of the recommended paint system. The Schedule, when used in conjunction with the Description of Coats table, will constitute the detail specifica- of these specifications. Any item to be painted, but not listed below, shall have the type of coats selected by the Architect or Engineer. tions of the contract, and will also serve as a convenient set of instructions for the painting contractor. Colors should be specified in the schedule by recording the numbers and names of the colors selected and by attaching a sample of each color to the Schedule. Color samples and nomenclature are available at your lo cal "Dutch Boy" dealer, or at the nearest "Dutch Boy" office listed on the back cover. EXAMPLE NO. 1: ROOMS (House, Hotel or Hospital, Etc.) LOCATION ITEM INDEX OF COATINGS COLOR OF FINISH SAMPLE ATTACHED Bedroom No. 1: Walls PI PI (tinted) E7 Ceiling PI PI E7 Doors P2 E8 E8 Windows F2 E8 E8 Base P2 E8 E8 Mouldings P2 E8 E8 Trim P2 E8 E8 Floor FI SI V3 V3 Bathroom No. 1: | Walls | Ceiling PI P2 (tinted) E8 PI P2 E8 I Door P2 E8 E8 Windows P2 E8 E8 1 Base, Trim P2 E8 E8 1 Mouldings P2 E8 E8 | Built-in Cabinet P2 P2/E3 E3 [ Radiator Enclosure P2 P2/E3 E3 [ Radiator Ml P2 E9 Kitchen: Walls____________ PI P2 E8 Ceiling PI P2 E8 Doors P2 E8 E8 Windows P2 E8 E8 Base, Trim P2 E8 E8 Mouldings P2 E8 E8 Built-in Bench P2 P2/E3 E3 Cabinets P2 P2/E4 E4 Range Base Cl Cl Louvre P2 E8 E8 Room Divider 28 P2 P2/E3 E3 Number Name Yes No 53 - Aquamarine 78 - Desert Gray 53 - Aquamarine 53 - Aquamarine 53 - Aquamarine 53 - Aquamarine 53 - Aquamarine 23-33 - Dark Oak X X X X X 34 - Pompeian Red 83 - Parchment 34 - Pompeian Red 34 - Pompeian Red 34 - Pompeian Red 34 - Pompeian Red 83 - Parchment 34 - Pompeian Red 715- Sparkling White X X X X X X X X X 24 - Aztec Gold X 92 - Mission White X 24 - Aztec Gold X 24 - Aztec Gold 24 - Aztec Gold X 24 - Aztec Gold X 57 - Soft Jade X 92 - Mission White 57 - Soft Jade X 24 - Aztec Gold X 57 - Soft Jade X SPECIAL INSTRUCTIONS TO CONTRACTOR 0000-NLI-000020070 1 IN EXAMPLE NO. 2: HOUSE EXTERIOR INDEX OF ITEM COATINGS Siding HI H2 H2 Exposed Timbers HI H2 H2 Overhangs HI H2 H2 Windows, Doors, Trim HI H6 Storm Sash, Screen Frames HI H6 Shutters HI H6 Gutters, Leaders Ml HI H6 Wrought Iron Railing Ml H6 Patio Floor, Steps Cl Cl Dado, Concrete Walk Cl Cl Wire Screens E5 Vent Stacks Ml H6 14 Nat COLOR OF FINISH Number Name 110 - Bright White 110 - Bright White 110 - Bright White 286 - Dark Green 286 - Dark Green 286 - Dark Green 210 - White 290 - Black 48 - Florentine Blue 48 - Florentine Blue 29-90 - Black 290 - Black SAMPLE ATTACHED Yes No X X X X X X X X X X X X SPECIAL INSTRUCTIONS TO CONTRACTOR EXAMPLE NO. 3: SCHOOL ROOM LOCATION ITEM INDEX OF COATINGS School Room No. 1 Walls Ceiling Doors Windows Base Moulding Trim PI W1 PI W1 P2 E5 P2 E5 P2 E5 P2 E5 P2 E5 COLOR OF FINISH Number Name SAMPLE ATTACHED Yes No SPECIAL INSTRUCTIONS TO CONTRACTOR 454 - Bermuda Pink 412 - Off-White 564 - Platinum Gray 564 - Platinum Gray 564 - Platinum Gray 564 - Platinum Gray 564 - Platinum Gray X X X X X X X HH EXAMPLE NO. 4: WORKING AREA (Plant, Store, Etc.) LOCATION ITEM Working Area No. 1 Walls Ceiling Doors Windows Moulding Trim Base Dado, Floor Machinery Base Machinery Housing INDEX OF COATINGS COLOR OF FINISH Number Name PI P2 E5 PI P2 E5 P2 E5 E5 P2 E5 E5 P2 E5 E5 F2 E5 E5 Cl Cl Cl Cl Cl Cl Ml P2/E4 E4 546 - Sunflower 546 - Sunflower 576 - Blue Haze 576 - Blue Haze 576 - Blue Haze 576 - Blue Haze 41 - Pewter Gray 41 - Pewter Gray 41 - Pewter Gray 750 - Vermillion z SAMPLE ATTACHED Yes No SPECIAL INSTRUCTIONS TO CONTRACTOR X X X X X X X 0000-NLI-000020071 X X X 29 rmulas Ir 11 I It'- Ik.; b If. -* For general requirements and surface preparation, see page 17. For description of products, see pages 4 aid V'',,` Id to 12d ms''rfiiT nr' *? **- MATERIALS Id 2d 3d 4d 5d 6d 7d 8d 9d lOd lid lid "DUTCH BOY" SOFTPASTE WHITE LEAD* LBS. 100 100 100 100 100 100 100 100 100 100 100 100 "DUTCH BOY" LINSEED OIL GALS. 4 114 314 2 2 214 114 5 3 4 PURE TURPENTINE GALS. 2 114 1 2 114 14 44 1 14 "DUTCH BOY" LIQUID DRIER** PTS. 1 1 11 1 1 1 1 VARNISH GALS. 14 "DUTCH BOY" LEAD MIXING OIL GALS. 3 4 "DUTCH BOY" RAW UMBER PTS. 14 GALLONS OF PAINT PRODUCED 9% 6% 6* 614 714 714 714 614 914 714 714 8% 13d to 28d, A-l and A-5 MATERIALS 13d 14d 15d 16d 18d 19d 20d 21d 22d A-l 28d A-5 "DUTCH BOY" SOFTPASTE WHITE LEAD* LBS. 100 100 100 100 100 100 100 100 100 "DUTCH BOY" PASTE RED LEAD LBS. 100 100 25 "DUTCH BOY" LINSEED OIL GALS. 214 3 14 14 2 214 214 314 PURE TURPENTINE OR MINERAL SPIRITS GALS 2 2% 14 1 Pt. 1 Pt. 3 Pti. "DUTCH BOY" LIQUID DRIER** PTS. 1 14 14 14 1 1 3 VARNISH GALS. 114 "DUTCH BOY" LEAD MIXING OIL GALS. 214 4 2 2 "DUTCH BOY" FLATTING OIL GALS. 114 114 "DUTCH BOY" WALL PRIMER GALS. "DUTCH BOY" LAMPBLACK GALS. "DUTCH BOY" C. P. PRUSSIAN BLUE PTS. 14 Pt. 114 5 DRY WHITING GALLONS OF PAINT PRODUCED LBS. 22 8% 714 to 514 4% 8H 6 6 vu 514 414 414 7 8'/, *HEAVY PASTE -- If heavy paste t* used, add 1 quart of tur- **When boiled linseed oil is used, omit drier except in Formula pontine to all formulas except 5d, lid, 13d, 14d, 15d, 16d, 21d. A-5 where it should be reduced to 2 pints. v* %* *52 .4 `I --tl PASTE WHITE LEAD PAINT EXTERIOR i WOOD i 1 s EXTERIOR WOOD SHINGLES EXTERIOR MASONRY Three coat work--unpainted wood (a) All unpainted wood shall receive a primer using Formula Id; a second coat using Formula 2d; and a finish coat using Formula Sd. Two coat work--unpainted wood (b) All unpainted wood shall receive a primer using Formula 8d; and a second coat using Formula Sd. Previously painted wood (c) All previously painted wood shall receive a first coat using Formula 6d; and a finish coat using Formula 3d. Back priming--unpainted wood (d) All wood to be back primed shall receive one coat using Formula 3d. Three coat work--unpainted wood shingles (a) Unpainted wood shingles shall receive a primer using Formula Id; a second coat using Formula Id; and a finish coat using Formula 5d (flat) or Formula 3d (gloss). Two coat work--unpainted wood shingles (b) Unpainted wood shingles shall receive a primer using Formula 21d; and a finish coat using Formula 5d (flat) or Formula 3d (gloss). Previously painted wood shingles (c) Previously painted wood shingles shall receive a first coat using Formula 7d; and a finish coat using Formula 5d (flat) or For mula 3d (gloss). hJ (a) Unpainted common brick shall receive a primer using Formula 9d; a second coat using Formula lOd; and a finish coat using Formula lid (flat) or Formula 3d (gloss) or "Dutch Boy" Pure White Lead Paint-Out side White (gloss). (b) Unpainted face or de-aired brick shall receive a primer using Formula 12d; a second coat using Formula 7d; and a finish coat as specified in paragraph (a) above. (c) Unpainted stuccot, concrete and stone shall receive a primer using Formula 13d; a second coat using Formula 5d; and a finish coat as specified in paragraph (a) above. (d) Brick, stucco, stone and concrete previprimed in bare spots using Formula 13d, and ously painted with an oil painttt shall be shall receive a first coat using Formula 13d; and a finish coat as specified in paragraph (a) above. plication of PASTE RED LEAD PAINT XTERIOR METAL (a) All unpainted metal shall receive a primer using Formula A-l; a second coat using Formula 28d; and a finish coat using Formula A-5 (Black) or Formula 3d (White Lead Paint) tinted to the desired color.*** (b) Previously painted metal shall be spot primed using Formula A-l, and shall receive a first coat using Formula 28d; and a finish coat as specified in paragraph (a) above. (a) Unpainted interior metal shall receive a priming coat using Formula A-l; a second coat using Formula 20d; and a flat finish coat using Formula 5d or "Dutch Boy" Wonsover (see Note A). (b) Previously painted interior metal shall be spot primed using any one of the priming coat paints listed in paragraph (a) above and shall receive a first coat using Formula 20d; and a flat-finish coat using Formula 5d (see Note A). * * * If a white or very light 6nish coat if dofirod, a white lead paint rather than a red lead paint should be used for the first coat in repainting and the second coat over unpainted metal. For this purpose, specify Formula 2d, tinting the paint slightly with raw umber or lampblack. NOTE A: Alternate Finish Cents: If other than a flat finish is wanted, any one of the following finish coats may be specified in lieu of Formula Sd; Flat Paint for Regular Stipple, Formula I Sd; Flat Paint for Sharp Stipple, Formula I6d; Plastic Paint, Formula 22d; Gloss, a pro* parod enamel. 0000-NLI-000020073 ;31 K. or further information help in color planning color samples ! i ,* i help in solving paint problems' ... Contact your nearest "Dutch Boy" office, listed below. .1 : ! I I K 3 BRANCH OFFICES____.J # r. 1 ' , r ..i ^ ;1 I : ' j.i k 1-1 i- III .'] : .4 > ! l! U I .I r' I I i-1 a / ; .Hi ,4! 1! - ( - i. !. : j-fr . ii' ! .. ! .I V ATLANTA 400 Bishop St., N.W. BOSTON 800 Albany Street BUFFALO 116 Oak Street CHICAGO 900 West 18th Street CINCINNATI 659 Freeman Ave. CLEVELAND 1776 Columbus Road DALLAS 959 Terminal Street DENVER 1932 Broadway DETROIT 3501 Griffin Street INDIANAPOLIS 1600 E. 21 St. KANSAS CITY, MO. 1406 W. 13 St. LOS ANGELES 3113 E. 26 Street MILWAUKEE 808 North Third Street NEW ORLEANS 516 Tchoupitoulas St. NEW YORK '111 Broadway OMAHA 2810 "A" Street PHILADELPHIA 2607 E. Cumberland St. PITTSBURGH 1376 River Ave. ST. LOUIS 722 Chestnut Street ST. PAUL, MINN. 102 W. Fairfield Ave. SALT LAKE CITY 902 S. Main St. SAN FRANCISCO 2240 Twenty-fourth St. SEATTLE 1128 W. Spokane St. WASHINGTON, D.C. 1025 Connecticut Ave., N.W. |. V, t NATIONAL LEAD COMPANY . GENERAL OFFICES \ V-i l\l Broadway, New York 6, N.Y. description, selection and specification 1956 SUPPLEMENTAL INFORMATION TO 1955 STANDARD GUIDE SPECIFICATIONS BOOKLET T his supplemental folder contains all the neces sary information relative to new paint finishes developed since the printing of the "Dutch Boy" 1955 STANDARD GUIDE SPECIFICATIONS book let. Kindly add this folder to your 1955 file copy for ready reference. NATIONAL LEAD COMPANY 0000-NLI-000020075 N 2641.01 ^description of paints and enamels . . . Ho u s e p a in t 118 and 119: Two tinting base house paints for use with "Dutch Boy" Color Gallery Colors increases the selection range of house paint colors by more than eighty. The descriptive qualities are the same as detailed under "Dutch Boy" House Paint in Color (100 series) on page 4. Shake Paint (24-00 Series): A fiat exte rior house paint, specifically formulated for use on wood surfaces of shakes, shingles and other rough textured wood siding materials. Made of specially proc essed linseed oil combined with highest quality lead, titanium and colored pig ments. A solid hiding paint that retains flexibility of film and will not crack or scale. For specification for use, see De scription of Coats Table below, opposite each index of coatings containing the sym bol H 10. Available in Intense White and 12 popular colors. Ma s o n r y p a in t Nalcrefe (55-00 Series): An emulsion type exterior paint with the resin binder a coir pound of polyvinyl acetate. Excellent pro tective properties relative to moisture problems inherent with porous masonry construction. Allows trapped moisture va por to escape but stops outside moisture from penetrating, thus eliminating blister ing and peeling. For all exterior masonry surfaces of concrete, stucco, brick, asbes tos shingles, etc. No primer is needed, dry in 1 to 2 hours to a flat finish of uniform color and sheen regardless of surface porosity or composition. Can be applied over fresh masonry. Will not saponify, oxidize, or chalk. For specification for use, see Description of Coats Table below, op- Table of Coatings I INTERIOR | for products described above, see page 12 for others INTERIOR STRUCTURAL MATERIAL ITEM PLASTER WAUIOARO AND OTHER PROCESSED PANELS Walls, Ceilings WOOD: Doors. Windows. Base, Chair (a l l s pec ies -* Rail, Trim, Mouldings, ! SOLIDS OR Paneling, Plywood, Room : PLYWOODS) Dividers, Closets, Cabinets CONDITIONS TO IE MET All normal living or work ing conditions, including moisture from within rooms and frequent washing of walls, as in kitchens, bath rooms, etc.; and an intense white enamel finish is de sired. Living conditions as in liv ing rooms, bedrooms, corri dors, working areas, etc.; and a self priming, wash able, flat finish is desired. All normal living or work ing conditions, including moisture from within rooms and frequent washing of walls, as in kitchens, bath rooms, etc.; and an intense white enamel finish is de sired. RECOMMENDED FINISH Diamond White Enamel Nalplex Flat Diamond White Enamel NO. Of COATS INDEX OF COAT NGS Surfaces or Surfaces Previously Previously Finished In Finished in Poor Condition Good Condition DESCRIPTION OF COATS PAGE 3 P1.P2.E10 below 2 P2.E10 below 2 X10, X10 1 below X10 below 3 PI, P2,E10 2 below P2, E10 below Description of Coats Table INDEX OF COATINGS pl.ps, no PI, 10 X10, X10 X10 H10, H10 H10, Mil, HI 1 FIRST COAT 040 Wall Primer and Sealer 701 Enamel Undercoat Nalplex Flat (72-00 Series) Nalplex Flat (72-00 Series) Shake Paint (24-00 Series) Shake Paint (24-00 Series) Nalcrete Paint (55-00 Series) STANDARD PAINTING SPECIFICATIONS REDUCTION TITLE AND APPLICATION SECOND COAT None None None None 1 pt. Linseed Oil per gal. (See Note) None 1 qt. Water per gal. 701 Enamel Undercoat 717 Diamond White Enamel Nalplex Flat (72-00 Series) Shake Paint (24-00 Series) Nalcrete Paint (55-00 Series) NLI 0000-NLI-000020076 NOTE: These two 1956 Supplemental Pages cover description, selection and specification of five new paints recently added to our line. Numbered page references below apply to such pages in the 1955 edition of our STANDARD GUIDE SPECIFICATIONS. See the 1955 edition for complete information on all other products. posite each index containing the symbol Hll. Available in 14 styled colors plus 6 additional tinting colors for deep mass colors. En a mel 717 Diamond White: A high gloss inte rior enamel of an exceptionally brilliant blue-white. Made with pure alkyd resin and particularly formulated to retain it's gloss and not to turn yellow under normal conditions. For use on all interior walls and woodwork as a finish coat where the degree of whiteness is of prime consider ation. A gleaming non-porous finish that resists moisture and repeated washings. For specification for use, see Description of Coats Table below, opposite each index containing the symbol E10. For addi tional white, as well as colored enamels, see pages 7 and 8. Fl a t w a l l p a in t Nolplex (72-00 Series): An odorless, flat, interior wall paint made with new Nacrylin, an acrylic latex, exclusive product of "Dutch Boy" research, combined with the highest quality titanium and colored pig ments. It is a one-coat finish, no special primer needed. It can be directly applied to painted, unpainted or wallpapered sur faces of plaster, wallboard, etc.; without any effect from the lime in plaster. Ex tremely high hiding, dries in 1 to 2 hours and has good washability. For specifica tion for use see Description of Coats Table below, opposite each index containing the symbol X 10. Available in White, Off White and 15 colors selected from the "Dutch Boy" Color Gallery of colors. Matching colors also available in "Dutch Boy" Satin Finish and High Lustre Enamels. Table of Coatings ] EXTERIOR I far products described abova, sao paga 14 for othors e x t e r io r STRUCTURAL MATERIAL WOOD: (ROUGH TEXTURED MATERIALS) MASONRV: CONCRETE, HICK, STONE, STUCCO ITEM Wooden Walls of Shakes, Shingles, Rustic Wood Sidings. Siding: Concrete Walls, Soffits, Spandrels. Cinder Blocks, Concrete Blocks, Asbestos Cement Shingles. CONDITIONS TO BE MET RECOMMENDED FINISH Normal atmospheric conditions. Any atmospheric condition; alkaline surface; where pro tection and decoration is desired. Shake Paint Naicrete Paint NO. OF COATS 2 1 IHDEX OF COATINGS Ne w Surfocos or Swrfacos Previously Previously Finished In Finishod in Poor Condition Good Condition DESCRIPTION OF COATS PAGE HIO.HIO H10.H10 H10 below below 2 Hll, Hll Hll,Hll below "DUTCH BOY" PRODUCTS AND THE PAGE ON WHICH IT IS DESCRIBED l)R = 717 ItaW WW m ............. above KEY: Ml ft----i- kM I ..... .above, left iss-M mm) .... above, left MS Wall Prkmr MMiar .................... f n = rti h--i gams .. ni=MOiiiHu (7i-os mm) above OF "DUTCH BOY" PRODUCTS REDUCTION THIRD COAT REDUCTION NOTES None None None 717 Diamond White Enamel None Do not add oil or tinting colors to this product or mix with other types of paint; allow first coat to dry 4 or more hours. None None New or unpainted surfaces or old painted surfaces badly weathered, reduce first coat as stated and allow to dry at least 43 hours. Old painted surfaces in good condition, reduce first coat with one pint mineral spirits or turpentine per gal. and allow to dry at least 24 hours. Pre-painted surfaces in excellent condition, one coat, no reduction. If surface is "chalky," wire brushing or in extreme cases sand blasting will be advisable before painting. 0000-NLI-000020077 NLI NATIONAL LEAD COMPANY BRANCH OFFICES ATLANTA 400 Bishop St., N.W. BOSTON 800 Albany Street BUFFALO 779 Walden Ave., Depew, N. Y. CHICAGO 900 West 18th Street CINCINNATI 659 Freeman Ave. CLEVELAND 1776 Columbus Road DALLAS 959 Terminal Street DENVER 2 Kalamath DETROIT 3501 Griffin Street INDIANAPOLIS 1600 E. 21 St. KANSAS CITY MO. 1406 W. 13 St. LOS ANGELES 3113 E. 26 Street MILWAUKEE 808 North Third Street NEW ORLEANS 516 Tchoupitoulas St. NEW YORK 111 Broadway OMAHA 2810 "A" Street PHILADELPHIA 2607 E. Cumberland St. PITTSBURGH 1376 River Ave. ST. LOUIS 722 Chestnut Street SALT LAKE CITY 902 S. Main St. SAN FRANCISCO 2240 Twenty-fourth St. SEATTLE 1128 W. Spokane St. WASHINGTON D. C. 1025 Connecticut Ave., N.W. NATIONAL LEAD COMPANY 111 GENERAL OFFICES BROADWAY, NEW YORK 6, N. Y. NLI 0000-NLI-000020078