Document rp8Qgz9QkZGEZNEVkkO5Jzz8J

1-DAY WALLBOARD JOINT COMPOUND DESCRIPTION Bestwall 1-Day Wallboard Joint Compound is a new product developed through Bestwall re search and field-tested through Bestwall Systems Engineers. It is designed for taping, conceal ing nail heads and corner bead in gypsum wallboard construction. This new compound makes possible the taping and finishing of all wallboard joints within a single day. It is used for all coats preceding the final coat. The compound, a "setting" material, is formulated to harden in 2'/2 to 3 hours. When hardened, Bestwall 1-Day Wallboard Joint Com pound will not shrink. This solves a major prob lem of wallboard installation, by eliminating days of heating unfinished homes and buildings, time lost traveling to and from jobs, and long delays while waiting for conventional materials to dry and harden. And because there is no shrinkage, quantity of compound and number of coats applied may be reduced. *lOAD JOINT COMPOUND 4 j; iiIi! i ^MNnSbU!!J<<11 feBTWAU ADVANTAGES Makes possible taping and finishing of all wallboard joints within a single day Sets and hardens in 2Vz to 3 hours Will not shrink when hardened Eliminates 4 to 5 days of delay. Eliminates multi-day heating of building while waiting for compounds to dry and hard en. Makes possible faster, more profitable jobs. PRODUCT USES For taping and all coats preceding the final coat in the finishing of joints, concealing of nailheads and corner bead in gypsum wallboard construction. It is well suited to high rise construction as well as to homes and other buildings. DATA Mixing: Mix 25 lbs. of Bestwall 1-Day Wallboard Joint Compound with 13 pints of water. Allow mix to BW-42690 soak 5 minutes. Re-mix, adding water if necessary to attain desired working consistency. Working life is ap proximately 2 hours. Application: Apply to joints, leaving a uniform thickness of material under the tapes. Apply first coat over tapes as soon as compound under tapes has hardened to a point where movement of the tapes will not occur. Fill corner bead. Treat nail heads at same time. Apply final tight coat with Bestwall Topping Compound, or other Bestwall finishing compounds as desired. When joint system texfures are to be used as part of the decorating scheme, a vinyl primer sealer or equiva lent must be applied to the entire surface prior to texturing. Complete application instructions included in each bag. Bestwall 1-Day Wallboard Joint Compound is available in 25 lb. bags. SGP 0026465 GYPSUM PRODUCTS JANUARY, 1962 PRODUCT SPECIFICATION DIRECTORY This list provides a simple up-to-date cross reference of Bestwall products with applicable American Society for Testing Materials Standards (ASTM Standards), Federal Specifications and American Standards Association Specifications (ASA). The last two digits in the ASTM reference number indicate the year of the edition. Where any specification covers more than one material the type or paragraph is shown. Items for which no standard is written are indicated. GYPSUM BOARD PRODUCTS BESTWALL WALLBOARD Topered Edge Squore or Tapered Edge ASTM STANDARDS FEDERAL SPEC. APPLIED UNDER SS-W51A0 BESTWALL INSULATING WALLBOARD Square or Topered Edge 3ESTWALL GRAINBOARDS Knotty Pine Square Edge) Figured Aspen Beveled Edge) Fawn Mohogany Beveled Edge) Driftwood Mohogony -Beveled Edgel Autumn Mahogany .Beveled Edge BESTWALL ETERNAWALL Seofoom Blue Snowdrift Spring Green Shodow Groy Sunset Pink Sand 'Beveled Edge) (Beveled Edge) Beveled Edge) Beveled Edge) Beveled Edge) Beveled Edge) BESTWALL FIRESTOP WALLBOARD Sq uo r Topered Edge SS W-51A 8 SS W-5IA 0 SS-W-51A 8 SSW-51 A 8 8FST<V JL1 f RESTOP INSULATING WALLBOARD S:il'0"> or Tapered Edge SS W-51 A 8 BEST VUL - 'REPROOF GTPSUM SHEATHING Long edges -Tongue ond Groove core-treated Tongue and Groove Square Edge Non core treated core treofed ucSTWALL * 0 a E R Square Edge Tongue and Groove Edge Firestop Tongue and Groove Edge BESTWALL LATH Plain, Pinholoth or Perfolath 'nvula'mg Lath long Length Plain Only Round Edge or Tongue and Groove Edge ,6i 16' 16 ' V. TC Lath- plom or pinhole Tapered Edge S*cmdord Length -- Other Lengths 94 fn some instances the Specification does not reflect all the detail* of - SS-l-30a Supercedes SS-P-431A 12/2/59 item as the depth of toper on toper edge board, the different PRODUCT SPECIFICATION DIRECTORY PLASTER PRODUCTS BESTWALL BESTWALL BESTWALL PRODUCT neat base coat piaster Unfibered, f>bered'. and E*tro f'bered* Li * E Ml< BASE COAT PIASTER Unfibered, f<bered Glois Only) and Masonry Mu WOOD FI3ERED PLASTER 8ESTWALL CONCRETE BOND PLASTER BESTWALL PREPARED TROWEL FINISH PLASTER BESTWALL PREPARED SAND FLOAT FINISH PLASTER - ws,.. BESTWALL BESTWALL BESTWALL 3ESTWALL BUILDERS LlME SMOOTH FINISHING LIME iPltOf MASONS LlME MioON S l_ i M E Autocia^d F,iSh i.mei Normal Hydrated Fmish lime! Autoclaved Mesons Lime) Normal Hydrated Masons lime) ASTM STANDARDS C-28 57 C-28 57 C-28-57 C 28-57 - - C 206-49 C 6-49 C 207-49 S C 207.49 N FEDERAL SPEC. SS P-402 (N) SS-P-402 (W) SS P-402 (W) - - SS L 351 (f) SS 1-351 iff SS 1-351 (M) SS-L-351 (M) BESTWALL KEENE S CEMENT C 61-50 SS-C-161 BESTWALL BESTWALL Li TE ACOUSTIC PLASTER-- White or ultra-White GAUGING PLASTER -- wh.te isatin spar) locol BESTWALL MOULDING PLASTER L limil (suneioweri Local 'Gian Fibered unless Specified Sisol C 28 57 C 28-57 C 59-50 C 59-50 SS-P-402 (G) SS-P-402 (G) ~ APPLIED UNDER ASA 42 1 ASA 42 l ASA 42 1 ASA 42 1 ASA 421 ASA 42 1 ASA 421 ASA 421 ASA 42 1 ASA 421 ASA 421 ASA 42 1 ASA 421 ASA 42 1 -- f BRAND BE FT Will - ' `< EE\T"rAi.L MISCELLANEOUS PRODUCTS PRODUCT ASTM STANDARDS FEDERAL SPEC. APPLIED UNDER .i/NT ' m - - ASA 97 1 ---- -- -- - ` - j A; < ", 'j yyo C 317-55 C 318-55 - ASA 59 1 ASA 591 SGP 0026 Any question not answered by the information on this sheet or available in the District Sales Office should be referred to the General Sales Office. Be sure to give aH information as to'issuing office, date of specification, job description, location, enforcing party, product involved, description of use if other than no rmal, amount involved, etc. This is particularly important when special limitations under standard specifications are involved. Each Bestwall Certain-teed Sales Corporation District Sales office has a book of applicable Federal Specifications. Each specification is prepared with a detailed analysis prepared by the Laboratory of which Bestwall products meet the specification and any limitations. The District Sales Manager is authorized to write a letter of certification in accordance with the Laboratory analysis.