Document qdGb5QQzYKvOBRvLBnxqwr8Kj

Sector of Use (please scroll down) Compilation of missed PFAS uses (non-exhaustive Describe Sector of Use (if you have choosen "other") Other Adult Hygiene Products Other Infant/Baby Diaper Other Other Feminine Hygiene Products Adult Hygiene Products Other Other Consumer mixture Chemical industry Chemical industry Chemical industry Chemical industry Infant/Baby Diaper Feminine Hygiene Products General manufacturing General manufacturing General manufacturing General manufacturing and maintance General manufacturing AS uses (non-exhaustive list!) PFAS missed uses (description of uses/application) Comments Fluropolymer (e.g .PTFE) coatings and rolls are used to enable control of non-woven webs at efficient line speed to maintain product quality and minimze scrap/waste in the production of products. fluropolymer coatings desired for their low coefficient of friction, replacement materials would not all equipment to run at current efficient speeds and loss of web control would leak to scrap and decreased product quality. Fluropolymer (e.g .PTFE) coatings and rolls are used to enable control of non-woven webs at efficient line speed to maintain product quality and minimze scrap/waste in the production of products. fluropolymer coatings desired for their low coefficient of friction, replacement materials would not all equipment to run at current efficient speeds and loss of web control would leak to scrap and decreased product quality. Fluropolymer (e.g .PTFE) coatings and rolls are used to enable control of non-woven webs at efficient line speed to maintain product quality and minimze scrap/waste in the production of products. fluropolymer coatings desired for their low coefficient of friction, replacement materials would not all equipment to run at current efficient speeds and loss of web control would leak to scrap and decreased product quality. PTFE or other fluropolymer coatings on machine parts to ensure low friction movement reducing wear and heating on high speed web-handling machinery. Low coefficient of fritcion surfaces are needed to enable speed and reduce wear and early failure of high speed components due to heating and movement. PTFE or other fluropolymer coatings on machine parts to ensure low friction movement reducing wear and heating on high speed web-handling machinery. Low coefficient of fritcion surfaces are needed to enable speed and reduce wear and early failure of high speed components due to heating and movement. PTFE or other fluropolymer coatings on machine parts to ensure low friction movement reducing wear and heating on high speed web-handling machinery. Low coefficient of fritcion surfaces are needed to enable speed and reduce wear and early failure of high speed components due to heating and movement. Gaskets composed of fluropolymers are used to protect electrical panels in areas which are electrically classified (e.g. ATEX) to prevent dust, chemical vapors, or water intrusion into sensitive equipment. This is true of many electrical panels used in FMCG production environments PTFE or other fluropolymer coatings on machine parts, sealings and piping inliners for corrosion prevention PTFE, PVDF are soft and extremely resistent to acid corrosion, e.g. in viscose fiber spin bath Filters and valves and hoses coated with PTFE or other fluoropolymers Non-stick sprays for surface treatment of machine parts (possible contact with product) PTFE, PVDF et al are soft and extremely resistent to acid corrosion, e.g. in viscose fiber spin bath and acidic washing liquids Low coefficient of friction surfaces are needed to enable easy material transport, e.g. of fibers Sliding plates of machine parts (possbile contact with product) low coefficient of friction combined with high resistence to corrosion