Document qZD5ddxv95vxrR0KmqMO2L2j

< PRODUCT CATALOG THIRTY-SEVENTH EDITION Ws. C....................... 0684922 Monsanto ................................. ....................................................... TOWOLDMON0043005 Monsanto manufactures and markets hundreds of chem icals, chemical fibers, plastics and petroleum products for virtually every industry. Animal and poultry feed additives fertilizer materials herbicides insecticides blasting materials chemical monomers petrochemicals crude oil natural gas Lion gasoline oils detergent chemicals heavy chemicals industrial food-grade phosphates. The information in this catalog provides basic data on these products. For more detailed literature, call or write the Monsanto office nearest you, or write: Monsanto Company Advertising & Market Development Dept. 800 North Lindbergh Boulevard St. Louis, Missouri 63166 068*1923 TOWOLDMON0043006 Monaanto product* are told through the following diviaiona : Agnculiural Divinon Hydrocarbon* and Polymer* Divition Inorganic Chemical* Oivision International Otvition Naw Entarprua Division Organic Chemical* Divition Packaging Divition Plailic Product* and Retin* Division Textile* Divition TRADEMARKS ... The word Monsanto and the Monsanto Block M are Monsanto's mot! important trademarks and are registered in the U. S. Patent Office. The following index contains other trade marks owned by Monsanto and ns subsidiaries. Trademarks which ere registered in the U. S. Patent office are followed by the and unregistered trademarks and trademarks for which registration it pending e'e followed by an asterisk. ALPHABETICAL PRODUCT INDEX A A-1 Thiocarbanilide Rubber Chemical. A-32* and A-lOti* Rubber Accelerator Accelerator B* Additive. . ... Acetate*, polyvinyl.................. . Acetone................ . Acidulants.......................... Acids and Anhydrides {Carboxylic) Acetylaalicylic Acid (Aapirin)................................................ ACL Sanitirer and Bleaching Compound........................ Acrilan Acrylic Fiber........................... ................ Acrylonitrile ................. .................. ........ Adhesives ........................................ Adhesives Components ..... Adipic Acid. Food (F.C.C.l and Technical tirade . Agricultural and Farm Products Air Pollution Control Devices......... Aircraft Hydraulic Fluids ... Alcohol Resin*, polyvinyl....................................................... Alkalate 216. 226 and 230 (Alkyl Benxene-- Biodegradable).................................... Alkophoa Aluminum Acid Phoephate*....... ..................... Alkyd Ana Phoephate*............... .......... .......... Alkyl Aryl Phoephate (Santidler 141).... .............. Alkyl Bentene Biodegradable....... ................ . Alkyl Benxene Sulfonate--Biodegradable) ...................... Alkyl Benxene Sulfonic Acid -- Biodegradable................. Alkyl Benxene Sulfonic Acid Anhydroua -- Biodegradable. Alkyl Phenol (Nonyiphenol) .............................................. Alkvlanile C-12 (Dodecyiaoiline) ................................... Alpha and Beta Radioactive Sourcee (Monaanto Reeearch Corp.).. ................................... Aluminum Acid Phosphates (Alkophoe)....... ............. Aluminum Chloride Solution 32 B4 . .......................... Aluminum Sulfate............................................. ............ Amines . ................ ........ Ammoplart* -- aee Melamine ft Urea Resin*...................... Ammonia. Anhydrou*. ........................................... Ammonium Nitrate 63% Solution . Ammonium Phoephate, di (Feed Grade). . . Ammonium Phoephate, di (Fertiliser Grade) . . . Ammonium Phosphate, ethyl................................... Ammonium Phosphate, mono............................... Ammonium Phosphate, trielhyl............................... Anionic Surface Active Agents Aniaidine, ortho............................................................. Aniaidine, para... ........................... Anti-Caking Flow Conditioners .. Anti-Foaming Agents Antioxidants and Antiozonants Anti-Slip and Anti-Soil Agents Aroclor Polychlorinated Polyphenyl* . . Array*. Light-emitting Diode*....................... Aakarel Fluid* Dielectric -- aee Aroclor... . . . AstroTurf Recreational Surfaces Avadex Herbicide ... . ... Avadex B\V Herbicide........... ... B Bacteriostats ....................... 66 Battery Acid (Electrolyte). . .. Bemhal Alkyd Beam Intermediate........... . 21 ..............67 Benzoic Acid, U.S.P., F.C.C.. . Benzyl Benzoate N.F.. . Benxyl Chloride Benzyl Chlorine (inhibited with 0.25% trielhylamme) Beta ft Alpha Radioactive Source*. Biphenyl Biaphenol A............. Biaphenol A- Hydrogenated (HBPA) Bleaching Compounds Blur "C" Nylon and Cumuloft Nylon Blue -C" Polyeater Bone Aah 'Natural). .. Brematrahlung Sourcee (Monaanto Reeearch Corp ) Brink Caecade Impactor... Brink Coalescer . Brink Filter.... Brink Miat Eliminator Brink Mi*t Sampler . . Brink Spray Catcher. Brush-Blitz* Herbicide Brush Killers Bruah-O-Cide* Herbicide Buffering Agents Building Products Get-Pak Polyethylene Sheeting . Monsanto Fome-Cor Board Monsanto Sewer and Drain Pipe . . Monsanto Vinyl Gutters and Downspout* Monaanto Vinyl Siding. Silent-Cor Sound Deadening Board Tytron* Flooring System Butadiene . ................................... Butene-2 Concentrate . .... . Butvar Retioa ... Butvar Reain Dispersion BR (polyvinyl butyral) Butyl Benxyl Phthalate (Santicixer 160). Butyl Phthalyl Butvl Glycollate (Santicixer B-16) Butylenes -Mixed feomera....... .. . Butyral, polyvinyl rssins (Butvar) ................. 33 c C' Aromatic Concentrate (Mixed leomera). . . . Caffeine Anhydrou* U.S.P.......... .... Calcium Cyclamate U.S.P. (Dietoee). . .. 34 17 69 Calcium Phosphates .30 Calcium Pyrophosphate . . . Calcium Silicate (Slag). Calibration Radioactive Source* (Monaanto Research Corp.).. Carbon Dioxide . 30 22 22 Carboxylic Acids and Anhydrides Catalyst AC Seria*..................... . Caustic Potash . Cellulose Acetate Sheet (Vuepak ).. Chelating Agenta (Dequeat 2000 and 2006) . Chemical Specialty Catalysts Man-made Fibers Chloroaniline. para......... Chlorophenol, ortho. .. Chlorophenol. para......... Chlorasulfonic Acid ... . .... . .. . .. Coal Tar Resins 50 Colloidal Silica* (Syton) .... . 64-( Compressor Lubricant (Pydraul AC). Consumer Packaged Products . Garden Hose (Monaanto, Gering Brands) . Coolanol 15 Dielectric Coolant and Heat Transfer Medium Coolanol ft 26 Dielectric Coolant for Electronic Equipment Coolanol 36 Dielectric Coolant for Electronic Equipment Coolanol 45 Dielectric Coolant for Electronic Equipment Coumarin.... .. Counters Cresyl Diphenyl Phosphate (Gasoline Grade).... C rosyI Diphenyl Phosphate (Plasticizer Grade). Crop-Guard* Herbicide.... Cumuloft Nylon. . . Curing Agents 32-.' ; CWS Fumaric Acid, Food (K.C C.) Grade Cyanuric Acid........... . Cyclohexanol___ Cyclohexylainine . .. . D 2,4-D Amine Herbicide, ... 2,4-D Butyl Eater Herbicide 2,4-D Butyl Eater Concentrate Herbicide. 2,4-D Granular Herbicide... 2,4-D Isopropyl Eater Herbicide. 2.4- D Low Volatile Eater Herbicide. . . . 2.4-D/2,4,5-T Amine Herbicide................. 2.4- D '2,4,5-T Butyl Eater Herbicide . . 2,4-D '2,4.5-T Low Volatile Eater Herbicide... DDBSA99-B DDBSA 99U-B.. . ... Decorative and Functional Overlay Paper* . .. Defoamer (PC-1244) . Id Id Id 11 id Id 11 11 11 11 ' 3-r--M 0664924 TOWOLDMONOQ43007 Dentifrice Abrasives 1 ili 'inn I'vrnphnsphaU' 1 'I- min Phosphate Anliydroi I mm Phosphate Dihydral I ii- jij(11< Mrtaphoaphale l1' . ! , .''imi Dcflocculating ami Sequestering Agent, i , i* -i .hoc Deflocculaltng and Sequestering Agent Detergent Intermediates 1 ' .... . Phosphate > mi Phosphate. Feed Grade mi Phosphate, Fertilizer Grade 8 8 I1" i., i ell mm ('yc)amate ll.S.P....... I in i .-I i Sodium Cyclamate N.F. . I 1 . 1 ilivllit'kyl Adipate (DOA) . I ' . I i lis I lie* y] Phthalate (l)OI') Digital Clock Digital Programer I 11 ii vilrci* y I iiphenyl Sulfone I 11,-iiiji'cyI Adipate (1)1 IM) . 111i-inieryl Phihalale (DJDP) I .............. I'hthalale (DIOP). . . I Min tlivl I'litlialnte. . I'i N tinvl. N-Decyl Adipate (DNODA). I'" ii t v I I urnarate (I)OK). . I Miilente (DOMI. . . Ill NOitvl. NDecvl Phthalate (DNODP) I 111dienvl i Biphenyl or Phenylbenzene) I 111'hrriy I I'lit lialate. I ii|'lirnylj!iinnidine (DPG). I'iplienylKUBmdtne Phthalate (Guanlal) Disinfectants I iiaiidnim phosphate, Anhydrous 1 iisiidium Phosphate, Duohydrale Dispersing Agents I *i i r idei yl Phthalate (DTDP)., I 'iidei ylamline I h.dei ylplu-nol (alkylphenol). . I iispout* and Gutters D 1' Solution Dilnilylamine Pyrophosphate I IPG I iiphenvlguanidine I >>-tml (Jr) Paint Brush Preeerver 'VtEl *Sni ty 01 uIdle Electronic Instrument* . Electronic Products KMA Resin* . Emulsifiers . Equipment and Instruments 52 34 24 14 52 69 69 52 16 16 27 52 .29 53 61 F Far-Go Herbicide. Farm Products Feed Supplements Frrrophoaphoru* (Iron Phosphide). Fertilizers Fibers Field-Clean* Herbiride Fire Retardants Flavorings Fleciofi) H (Rubber Preservative) Fome-t or Boards....... 10 32 8 13 .11 66 17 61 12 Food Ingredients Formal, polyvinyl reams I Ft Formaldehyde. . ) Formaldehyde Resins Formyar Resins (polyvinyl forma Technical Grades Functional Fluids Fungicides Fungistats Grades 65 G Gallium Antimonide (Electronic Grade) Gallium Arsenide lElectromc Grade). Gallium Arsenide Phosphide Alloys (Electronic Grade) Gallium Phosphide (Electronic Grade)....... Gamma Hadioactive Sources (Monsanto Research Corp.).. Garden Hose (Monsanto, Gering Brands) . Gasolines Lion Premium Gasoline with Lionite Additives Lion Regular Gasoline with Liomte Additive* Premium Gasoline Regular Gasoline . . Gear Lubricants Lion All-Purpose Gear Lubricant Lion Gear Lubricant Mineral Gear Oil Additives (Santopoid) . . Gelva Polyvinyl Acetate Copolymer Resins Gelva Copolymer Solutions (polyvinyl acetate) Gelva Polyvinyl Acetate Emulsions Gelva to Multipolymer Solutions... Gelva Powders 700 and 702 (polyvinyl acetate).... Gelva Resins (polyvinyl acetate)....... Gelva Resin Solution* (polyvinyl acetate)............. Gelvatol Polyvinyl Alcohol Resin. .. Germicides ...................... Ger-Pa k Polyethlene Sheeting . . . Ger-Pak Tape ............. . Glacial Acetic Acid . . Glaaay Sodium Phosphate (Oilfos). . Golf Championship Green Surface Golf Practice Putting Green Surface ... Golf Tee Surface.............................................. . . . Greases Lion AC Track Roller Grease. Lion TO All Weather Chassis Grease Lion Barium 4-in-I Grease . Lion Cotton Picker Spindle Grease . Lion Multi-Purpose A.F. Grease . . Lion Wheel Bearing Grease ... Guaiscol............. . . . . . Guantal Diphenylguanidine Phthalate... . . . Gutters and Downspouts......................... .. 36 36 36 36 36 36 35-36 47 46 47 47 29 31 59 59 H Halogen-Containing Compounds 24 HBPA Hydrogenated Bisphenol A. . HB-40 Partially Hydrogenated Terphenyl . Heat Radioactive Sources (Monsanto Research Corp.)....... Heat Transfer Liquids (Therminol) . ... Heavy Chemicals ..... 51 53 22 21 21 Herbicidal Oil No. 1 (Lioo*) . . Herbicidal Oil Noe. 6 and 7 (Lion*). . . .. . H) 10 Herbicides (Pre^and Post-Emergence)910 Herbicides (Hormone).,. . H. T. Monocalcium Phosphate (Monohydrate) . Hexahydroaniline (Cyclohexylamine).... 10 18 23 Hormone Herbicides m Hydraulic Fluids 19 20 Hydrochloric Acid (Muriatic Acid)..., 21 Indium Antimonide (Electronic Grade). . Indium Arsenide (Electronic Grade) .... Indium Phosphide (Electronic Grade) Industrial Asphalts I.ion* 5A60 Primer l.ton* Asbestos Asphalt Roof Coating Lion* Asphalt Plastic Roofing Cement I-ion* Blind Nailing Roofing Cement.. Lion* Bondite Adhesive Asphalt. . . Lion* Cold Process Asphalt I.ion* Cold Process Lap Asphalt. . Lion* Dead Level Roofing Asphalt.. . l.iorv* Dry-Kiln Mastic . Lion* E-120-A Asphalt Lion* K-12D-HL Aaphalt Lion E-120-HL Primer Lion* MetarCoating No. 3 I.ion* Nokorode Brush Aaphalt . . I.ion* Nokorode Butter Aaphalt Lion* Nokorode Car Cement... 40 40 41 41 41 0684925 m I .ion* NokorSde Chaaai* Block I.ion* Nokor6de TO Coach Builder* Sound Deadener l.ion* Nfikorode Coach Builder* Undercoatmg I.ion* Nbkorode Construction Asphalts . I.ion* Nokorode 0-41 Asphalt l.ion* Ndkftride E Hole Lion* N6k6r6de Government Bust Preventive*. Lion* N6k6rAde K Rote. . . Lion* N6k6r6de Low Temp. . . Lion* N6k8r&de Hoof Perm. . Lion* N6k6r6de to Roof Seal Lion* N6k6r6de Seam and Backing Cement .. Lion* Ndk6r6de Seal Rote Hoofing Cement. Lion* N6k6r6de Seal Hot* Sealing Compound . . Lion* N6k6r&de SP Petroleum Asphalt . l.ion* Nfikorode Seal Perm Hoofing Cement . . Lion* Nfikfirfide Under Car Sealer and Silencer l.ion* Nfikfirfide No. 2002 Undercoating and Sound Deadener . Lion* Nfikfirfide Waterproofing Compound . . . Lion* Patwr Laminant Lion* Pole Compound . . Lion* Solid Hooting Asphalt . .. Industrial Oils J Azalea Oils. . Baize Oil* . . . Coda ffi Oil* Cylinder Oil.. Emitter M120BI. Insecticides Insoluble Metaphosphate Insoluble Sulfur 60 . Instrument* ... . . IP-61 Sodium Trimetephosphite. . . Iron Phosphide (Perrophosphorus) . laooclyl Isodery) Phthalate (Santicizer 602) . Isoprene Concentrate.................. L ijictir Acid, Food and Technical Grades... Lamhast Herbicide......... Lampblack....... . Lawd Surface .. . . . Leavening Agents ...... Levn-Lite* Leavening Agent . Light-emitting Diode* and Arrays .. Infrared Emitter MI 20 B1 Visible Light Emitter MV 10B. . . . Visible Light Emitter MV 10A Visible and Near Infrared Laser* ML 30C1 5i7 Visible Array MA 10A2......................... Limit Herbicide . .... . Lion* Asphalt Products Herbicidal Oil No. 1 Herbicidal Oil No*. 6 & 7 . . Industrial Oils............ Motor Oils ... . . Petroleum Product*'Chemical* "i> ABS and SAN Molding and Eitrusion Phoa Dentifrice Abrasive. . l.usiren Styrene Extruding Materials.. I.ustrex Styrene Molding Materials . . l.ytron Benins . Lytron Italic* 43 44 44 M Maleic Anhydride....... Man-Made Fibers .. . Materials MCP Amine Herbicide MHA Methionine Hydroxy Analog Melamine and Urea Resins Meraize Paper Sizing Agent. . Merlone WH-4 Precost for Reproduction Paper* Metal Processing Compounds Methanol . Methapynlene Fumarate (Thenylpyramine Fumarale) Melhapyrilene Hydrochloride (Thenylpyramine Hydrochloride). . Melhaean Vulcanization Accelerator Methyl Diphenyl Phosphate (Phoatane Brand of MDP Methyl Parathion Insecticide. . . . Methyl Parathion (Stabilized) (Insecticide). Methyl POT. Methyl Phlhalyl Ethyl Glycollate (Sanlicizer M-17) Methyl Salicylate U.S.P. Methylacelyfene Allene Concentrate. Mixed Acid (Nitrating Acid). Modafiow Begin Modifier. Mod-E|ox Epoxy Keein Modifier. Monpreg Impregnated Paper .. Monoammonium Phosphate . . Monocalcium Phosphate (Monohydrale) . . Mono Thiurad Rubber Accelerator. . . . Monomers Monomers for Synthetic Rubber Monopotaaeium Phosphate ... Monosodium Phosphate Monaanto Bags and Liners Monsanto Fome-Cor Board Monaanto Pent* (Pentachloronhenol Technical) . . Monaanto Polyethylene Blow Molding Compounds 23 13 66 67 25 26 26 60 11 12 28 55 17 34 21 23 53 66 29 18 61 25 25 49 Monsanto Polyethylene Extrusion Coating Material* Monsanto Polyethylene Film and Sheet Maienal Monsanto Polyethylene Wire & Cable Compound* Monaanto Research Corn. Monsanto Sewer and Drain Pipe Monsanto Vinyl Gutters and Downspout* Monsanto Vinyl Siding Montar Synthetic Resina Motor Oils Lion Naturalube Extra Heavy Duty Motor Oil Lion HDX Motor Oil Lion Multi-Temp Naturalube Motor Oil Lion Naturalube Automatic Transmission Fluid Lion Naturalube Motor Oil LionA Naturalube Outboard Motor Oil Lion (New Improved) Naturalube Outboard Motor Otl Lion Sutler Duty Naturalube Motor Oil Tiger Motor Oil Mould Coat (Synthetic Bone Ash) Multi-Purpoee Surface . Muriatic Acid (Hydrochloric Acid)... . 40 .4-1 .p, 1 1 1.' |. ',.t H im ;ih .PH ;ik ;p) :ki n<* i;v _>1 N NFB 80 and 85 Non-Fuming Aluminum Bright Dip Bath Niran 6-3 Insecticide .. Niran 10-G Insecticide Niran 10-10 Insecticide (Soil) Nitrating Acid (Mixed Acid). Nitric Acid . Nitroaniline. ortho. . Nitroaniline, para............. Nitrochlorobenzene, ortho Nitrochlorobenzene, para Nitrogen Fertilizer Solutions .. Nitrol Elastomer Modifier. Nitropnenol, para............... Nonionic Surface Active Agents Non-Nutritive Sweetners Nonylphenol (Alkyl Phenol) . . Nuclear Sources Nutrition Supplements Nutrium Fertilizer. Nylon Resin Nylon 6/6 and 6/10 Resin . o Odorants Oil Additives (Santolube ). . . Oilfos Glassy Sodium Phosphate . Oils -- Light Aromatic Olli ... . Burner Oil Butane-Propane Mixture Diesel Fuel . Herbicidal Oil No. 1 Herbicidal Oils Nos. 6 & 7 Ink Oil.. . . Kerosene . . .. ResCfual Fuel Oil. Tractor Distillate. . Oils-- Lubricating Neutral Oils....... Opalon Polyvinyl Chloride Dispersion Resins . Opalon Polyvinyl Chloride General Purpose Keein* Opalon Polyvinyl Chloride Wire and Cable Compound* Organic Chemicals Organic Nuclear Reactor Coolant (Santowax OM P) ortho-Anisidine . . . ortho-Chloroaniiine. . ortho-Chlorophenol ortho-Dichlorobenzene . . ortho-Nitroaniline ortho-Nitrochlorobenzene. . ortho-Phenelidine. . . . ortho-Tolyl Biguanide (Sopanox) Oaciliating-DisK Rheometer OS-45 Type IV (High Temp. Hydraulic Fluid for Aircraft) P Packaging Paint/Coating Ingredients Pan-O-Lite Leavening Agent Paper Chemicals Paper-Sizing Agent (Meraize) para-AniRidine... pa ra-Chloroaniline para-Chlorophenol para-Dirhlorobenzene (Santochlor) . para meta Xylenes pa ra-Nitroaniline para-Nitrochlorobenzene para-Nitrophenol para-Phenetidine para-Toluenesulfonamide para-Tolueneaulfonyl Chloride Parathion - Ethyl and Methyl (Insecticide) 0664926 TOWOLDMON0043009 Paving Asphalts An|ilmlt Cements mu! Cutback Asphalt* ].11>n* Colay Pnvinp Asphalt bum* I>-Hi> Joim <mti|M)und l.mri* Membrane Lining PC-1 .'411 IcfoamiT IVnu.i lilnrnphenol. Technical (Monsanto Pentfl) Petrochemicals Petroleum Additives Petroleum Products and Chemicals Pharmaceuticals I'henrict in l ' .S 1'. I'ticiirliilim', ortho I'hviwiuline, para. . 3 Phenols I'lit'iiohr and Htutorcinol Resins Phenolic Resins I'lif nolle Varnished ( Reainox ) ... I'lii'iiollJilliHlcin U S 1'.. . . I'hcnolphtliHlcin, Yellow I'hrnolsulfonic' Acid Phenylhenzi'iie ' Hiiiheiiyl) I'hi.N Chek hire Retardant I'Iior-Chrk I' 30 hire Retardant. I'hongmil C-22K Organophosplioius Compound Phosphate Feed Solution Phosphates (Sodium) l*hoi|)lialic Fertilizer Solution . l'lio|)luileuni Su|er Phosphoric Acid. Phosphoric Acids .1 l'hi>a|ihoric Acid (7&, 80 and 83%). l`hi>n|ihoric Anhydride (Phosphorus Pentoxule) Phosphorus and Phosphorus Derivatives .... Phosphorus, Elemental Pho|ihorus Oxychloride l'lios|ihorus Penlasulfido. . .. l'hoR|)horus I'enloiide (Phosphoric Anhydride) Phosphorus Trichloride I'hnstane Brand of MOP (Methyl Diphenyl Phoephate). f'hthalic Anhydride . i'hthalyl Chloride. . . . !`t|>e, Monsanto Sewer and Drain. . Pi|>erylcne Concentrate. . . . Plastic Bottles and Containers......... Plastic Closures 1`laatir Consumer Packaged Products... . Plastic Pilments . Plastic Pood Tubs Plastic Garden Hose (Monsanto, Gering Brands) Plastic Meat Trays (Clear).................. i'laatic Vending Cups . Plasticizers Plastics-Resins-Plasticizers Playground Safety Surfaces . Polyeater . Polyethylenes Monsanto Bags and 1.inert....... Ger Pak Polyethylene Sheeting. . I'olyllex Film I'olyflex ) Sheet . 11 Polyvinyl Acetates Polyvinyl Acetate Copolymer Kearns (Gelva ) ... Polyvinyl Acetate Co|Hilymer Solution* (Gelva) Polyvinyl Acetate Kmulsiona (Gelva) ... Polyvinyl Acetate Multi|K>lymer Solutions Polyvinyl. Acetate Powder* (Gelva) Polyvinyl Arotate Kearns (Gelva).. . Polyvinyl Acetate Beam Solutions (Gelva). .. . . Polyvinyl Alcohol Resins Polyvinyl Butyral Film Polyvinyl Butyral Resins Polyvinyl Butyral Beain Dispersions Polyvinyl Formal Resins....... Post Emergence Herbicides . Potassium Phosphates Pre-Kmrrgencc Herbicides . Preservative iStop Scald* Fruit Spray)... Preservative............ . ... g I'tolecl ivp Sheeting Protein Interactants Pydrsul AC Compressor Lubricant....... Pydrnul AC Winter Grade 28(Compreaeor Lubricant) Pyriraul Hydraulic Fluids. Py-Kan Anhydrous Monocalcium Phosphate Crystals (Bobber Chemical). . . . 4> and BJ* 11)1 Beams. 'active Source* 'Monsanto Beeearch Corp.) snto|>e Heal Soiircoa (Monsanto Bescarch Corp.) oil (5) Herbicide -) Her i) T Her Hide ie and Beeimene Urea Formaldehyde. Resin Materials a Polyol (BJ 100) Liquid Phenolic Beaina . . Phenolir Lump, Flake and Beam Compov Phenol-F"o"i...la. .l.d..e..h..y..d..e....B..e..a..m Liquid Solute Phenolic Resin Varmahe* and Phenolic Beaini p R'eal Polyol Chloride). . Rogue Herbicide Roundup Herbicide Rubber Chemicals Accelerators for Natural and Synthetic Rubbers Aldehyde Amine Type . . Antioxidants and Antiozonants Guanidine Type Rubber Instrument* Special Materials Thiocarbanihde Tyj>e Thiazole Type . . . Ultra Type Monomers tor Synthetic Rubber. . . RZ-100* (Rubber Chemical) Rubber Instruments Oscillating-Disk Rheometer Models 10. 100, MP-10 MP-100 and MP-V s Saccharin, Calcium, N.F., F.C.C... Saccharin. Sodium. N.F., F.C.C....... Saccharin, U.S.P.. Saflex Vinyl Butyral. . Salicylic Acid. U.S.P................ Salt Cake (Sodium Sulfate Anhydrous Technical).. o-_.------- i.pj Plasticizer v 3 Plasticizer - . v 8 Plasticizer .... . ... . b 9 Plasticizer b E-15 Plasticizer . . . . b B-16 Plasticizer . ... b M-17 Plasticizer. .. P 140 Plasticizer . b 141 Plasticizer . p 148 Plasticizer b 160 Plasticizer . b 213 Plasticizer b 214 Plasticizer b 215 Plasticizer b 218 Plasticizer . . 6 262 Plasticizer b 268 Plasticizer b 405 Permanent Plasticizer . . b 409 Permanent Plasticizer . b 411 Permanent Plasticizer U 462 Permanent Plasticizer . b 465 Plasticizer p 480 Permanent Plasticizer p 481 Permanent Plasticizer p 482 Permanent Plasticizer b 483 Permanent Plasticizer b 602 Plasticizer b 630 Modified Phthalate Plasticizer. . . b 631 Modified Phthalate Plasticizer. . . b 636 Plasticizer b 644 Plasticizer . b 683 Plasticizer . B) (Sodium Pentachlorophenale. Technical) Silica Aerogel for Industrial Applications uouiuvoi vp (Silica Aerogel for Thermal Insulation) Santoeel 62 Flatting Agent . . . Santoeel L Flatting Agent. Santoeel Z Aerogels Samochlor para-Dichlorobenzene Santocure (Vulcanization Accelerator).. 5 26 (Vulcanization Accelerator) b MOR and MOR-90 (Vulcanization Accelerate _b NS (Vulcanization Accelerator) IAW (Rubber Preservative). , . DD (Rubber Preservative). 13 (Rubber Accelerator) . 13-S (Rubber Accelerator) 17 (Rubber Preservative) . IP (Rubber Preaervative) 75 (Rubber Preaervative) . . . 77 (Rubber Preaervative) 217 (Rubber Preservative) C Fuel Oil Additive............. p MHP Resins p MS 80% Industrial Resin 70A (Oil Additive) b 392 Oil Additive . -. - 1B) 3A93lkOyldBAendzdeitniveeSuZlifnocnaDteialkyl 85-BJitAhilokpyh) oBsennhzaetnee .Sulfonate ,, SMaEn-tBoluSbleurry3. 94-C . Oil Additive "' A6n93ti.oxidan.t.. . R69A8.ntioxidant. , .. " 8175GOeriml Aicdiddei.tiv. e . 1 Solution 22- RI Gear Oil Additive 23- RI Gear Oil Additive . . . 0684927 TOWOLDMONOQ43010 Santopour |P C Oil Additive. . . . Sanloquin P Antioxidant Samosita 3 Sodium Sulfite Anhydrous. . Kantosized Sanlotanff 5 Vacuum Diffusion Pump Fluid Samovar A (Rubber Preservative) Santowax (IMS' Organic Coolant for Nuclear Hearten Santowhite 54 (Rubber Chemical) Santowhite 54 S (Rubber Preservative) . Santowhite Crystals (Rubber Preservative) Santowhite I. (Rubber I'reaervative) Santowhite MK (Rubl>er Preservative). Santowhite Powder (Rubber Preacrvative) Scripse! 1<M), 500 Series Pa|>cr Coating Resins Senptite Series Wet-Strength Resins . Sequestrants Sewer and Drain Pipe Signal Sources Silent-Cor Sound Deadening Hoard Silica Aerogel for Industrial Applications (Santocel ). . . Silica Aerogel for Thermal Insulation (Santocel) Silicon (Kleclronic Grade) . . Skydrol 500-A Fire Resistant Hydraulic Fluid for Jet Aircraft Skydrol 600-H Fire Resistant Hydraulic Fluid for Jet Aircraft Skydrol Slag, Calcium Silicate Sodium Acid Pyrophosphate . .... Sodium Alkyl Benzene Sulfonate Biodegradable. Sodium Aluminum Phosphate (Levn-Lite*) . . Sodium Benzoate. U.S.P.. F.C.C. . Sodium Hiaulfale (Nitre Cake) . Sodium Bisulfite Anhydrous....... . Sodium Cyclamate N.F. (Dietoae) . .. . Sodium Chloride (Rock Salt)... . . Sodium Hexametaphosphate ... . Sodium Metabuulhte (Sodium Bisulfite Anhydrous)......... Sodium meta-Nitrobenzene Sulfonate....... Sodium Pentachlorophenate, Technical (Santobrite) . . . SODIUM PHOSPHATES Sodium Sulfite Anhydrous Technical . Sodium Sulfite Anhydrous (Santosile) ... Sodium Trimetaphosphite (IP-61 ) . Sodium Tripolyphosphate. .. . ... . . .. Sopannx ortho-Tolyl Biguanide. Special Projects and Development (Monsanto Research Corporation). Specialty Products . Sy Phosphate* Sequestranl. . .. Slabil-9 leavening Agent.. Stabilized Methyl Paralhioo . Stadium (Athletic Field) Surface....... . Steroi AJ-100 Surfactent Stcrox CI) Surfactant Sterox I>F Surfactant Sterox DJ Surfactant . Sterox NJ Surfactant Sterox NK Surfactant.... . Sterox A WS Surfactant............. Stop-Scald* Fruit Spray. . . Stymer Copolymer Resina . Styrene Extruding and Calendering Material (Lustrex). Styrene Molding Compound (Luatrex!....... . Styrene Monomer....... Styrene Resins/Plastics . Monsanto Sewer and Drain Pipe........... Sulfonic Acids .......... . Sulfaaan R Vulcanizing Agent. . . Sulfonamide Resins .. 5-Sulfosalicylic Acid, Technical. Sulfur-Containing Compounds (misc.) Sulfur Dioxide. Liquid............. . Sulfuric Acid and Oleum. . . . Suphfoa 26 Sodium Tripolyphoaphate . . Surface Active Agents Sweetners Sweetners, Non-Nutritive Syton AS-200, AS-240, AS 260 (Colloidal Silica) Syton C-30 and 200 Colloidal Silica......... Syton C-40 and 240 Colloidal Silica......... Syton C-60 and C-250 Colloidal Silica . Syton DS. DS-40. DS-50 and DS-200. DS-240, US-260 Colloidal Silica Syton P and P-200 Colloidal Silica Syton W-200, W-240. W-250 Colloidal Silica . ,4.,'i-T Amine Herbicide. . . . ,4.5-T Butyl Rater Herbicide. ,4,6-T low Volatile Eater Herbicide. . Tanning Agents ICC (3.4,4, Trichlorocarbamlide) 1 enn`8 Surface Tertiary-Butylamine retrapotassium Pyiophosphale Tetrapro|>enyl!iuccimc Anhydride (TPSA) levraxodium Pyrophoaphate Tetrathal Flame Retardant Textile Chemicals Textiles Division Thenylpyfamine Fumarale (Methapyrilene Fumarate). Thenylpyramine Hydrochloride (Methapyrilene Hydrochloride). Therminol FR Heat Transfer Liquida Tberrnmol 66 Heat Tranafer Liquids Therminol 77 Heat Tranafer Liquids Thickening Agents Thiofide MBTS Rubber Chemical Thiotax* MBT Ruklier Chemical Thiurad Rubber Accelerator Threshold Detectors (Monsanto Research Corp ). TiRamic* Flexible Ceramic Panel* Toluene Toluenesulfonamide para. Toluene*ulfotwc Acid Toluenesulfonyl Chloride -para TPSA Tetrapropenyleuccinic Anhydride Tributoiy Ethyl Phoaphate (TBEP) Tributyl Phoaphate (TBP) Tricalcium Phosphate Tricresyl Phosphate. . Triethylammonium Phoaphate Trfphenyl Phosphate. . Triphenyl Phosphite Tripotassium Phosphate Triaodiura Phosphate. Anhydrous. . Trisodium Phosphate, Crystalline Tri-Una-Sol Fertilizer Solution Tylron* Flooring System u Ullron Polyvinyl Chloride (Flexible Film 4 Sheeln Urea, Feed Grade Coated Micropnlla . Urea, Fertilizer Grade Coated Pellet* . Urea. Fertilizer Grade Uncosted Pellet*. Urea, Industrial Grade Uncoated Pellet*. . . Urea and MeLsnune Resins VACUUM PUMP FLUID Vanadium Sulfuric Acid Catalyst Vanillin Monsanto*. Vegadex Herbicide.. Vinyl Acetate Monomer Vinyl Butyral (Saflex ). . . Vinyl Chloride Extruding 4 Calendering Materia] (Opalon) Vinyl Chloride (Flexible Film 4 Sheeting) Ultror Vinyl Chloride Molding Compound (Opalon) Vinyl Chloride Monomer Vinyl Gutters and Downspouts VINYL RESINS/PLASTICS Vinyl Siding . . Vinyl Styrene (Stymer) Visible Light Emitter MV 10A Visible Light Emitter MV 10B Visible and Near Infrared lasers ML 30C1 5x7 Visible Array MA 10A2 . . Vocol'S (Rubber Accelerator) Vyram Rigid Vinyl Compound* Vuepak Cellulose Acetate Sheet Wallop Herbicide -Insecticide Weed Killers Wood Preservative <Mot 0689928 TOWOLDMONOQ43011 AGRICULTURAL and FARM PRODUCTS FEED SUPPLEMENTS DIAMMONIUM PHOSPHATE, FEED GRADE INORGANIC DIVISION FORMULA: (NH.bHPO. MOLECULAR WEIGHT: 132.068 STANDARD FORM: Crystal* TYPICAL ANALYSIS: 1`hoaphorua Nitrogen P.Oi 23.1% 20.7% (Min.) 53.0% (Min.) USES: DAP i* a concentrated, economical aourre for non-protein nitrogen and phoaphorua in ruminant animal feeda. SHIPPING INFORMATION: DiAmmonium Phosphate (Feed Grade); 80-lh. oat multi-wall paper baga; bulk boaee, hopper cars, and bulk trucka. MHA METHIONINE HYDROXY ANALOG Celcium sett of DL-tlpht-hydroMy-gemmt-mtthyl/nerctptobJlryic tcid AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Powder. SPECIFICATIONS: Assay, 90% aa calcium aalt of Methionine Hydroay Analog; 1% moiature max.; acreen analyaia. 1% max. on 20 mesh; denaity 30 lb./cu. ft. (tapped). PROPERTIES: Nutritionally equivalent to DL-methionine on a gravimetric baaia (1.09 Iba. Methionine Hydroxy Analog; 90% , eq. to 1.0 II*. DI,-methionine, 98%). Free methionine hydroxy ana log ia a metabolite in the animai'a utilixation of methionine. USES: Aa a feed eupplement in poultry feed to aupply requirement of methionine. SHIPPING INFORMATION: Rail: Condition powdera, regulators or tonics, animal or poultry, NOIBN. Truck: Feed Supplements, not Iroren, 50-lb. baga. MONOSODIUM PHOSPHATE INORGANIC DIVISION (Also 5a# Psgt 31) FORMULA: NaHiPO. MOLECULAR WEIGHT: 119.99 STANDARD FORM: Powder and granular. PROPERTIES: Contains not lew than 58% PiOi; pH value of 1% solution 4.8. GRADES: Food; commercial. USES: A source of phosphorus for potentiated poultry feeds. SHIPPING INFORMATION: Sodium Phosphate. 100-lb. baga; 350 and 100-lb. drums. PHOSPHATE FEED SOLUTION INORGANIC DIVISION STANDARD FORM: Liquid. PROPERTIES: A apeeial grade of Phosphoric Acid prepared for a phosphate supplement in animal feeda, moLaseea, and mineral mixes. Phoaphorua content---23.7%. Not recommended for other usee. SHIPPING INFORMATION: Phosphate Feed Solution containing not mors than 58% Phosphoric Anhydride by weight. Tank cara ami lank trucka. SACCHARIN (CALCIUM AND SODIUM) U.S.P. Set Pegt 18 8 SANTOQUIN ANTIOXIDANT See Pege 85 SUPLIFOS 25 SODIUM TRIPOLYPHOSPHATE INORGANIC DIVISION FORMULA: Nai P,Oit STANDARD FORM: Granular TYPICAL ANALYSIS: P Aa. F. Pb . . 2 75 Pl>m 250 ppu 3< SHIPPING INFORMATION: 100 lb baga. hulk and bulk trucka. UREA, FEED GRADE COATED MICROPRILLS AGRICULTURAL DIVISION STANDARD FORM: Urea microprilla with an inorganic material aa a coating agent. ANALYSIS: Nitrogen (Min ) Moiature (Max.) Biuret (Max.) 42.0% 0.6% 1.0% USES: As a protein source for uee in ruminant feeda SHIPPING INFORMATION: Urea Feed Grade (not for human consumption or pharmaceutical uee). 80-lb. multi-wall paper Imga with polyethylene lining. Also in bulk. FERTILIZERS DIAMMONIUM PHOSPHATE, FERTILIZER GRADE AGRICULTURAL DIVISION FORMULA: (NH.)tHPO, MOLECULAR WEIGHT: 132 068 STANDARD FORM: Crystals TYPICAL ANALYSIS: Assay PrO. NH> 98.4% 53.7% 25.5% SHIPPING INFORMATION: Fertilizer Compound (Manufactured Fertilizer) NOIBN, Dry. 80-lb. multi-wall bags. Hulk hopper ..>ra and bulk trucka. NITROGEN FERTILIZER SOLUTIONS AGRICULTURAL DIVISION STANDARD FORM: Clear water solution. ANALYSIS: Varying analyaia containing ammonia. niimmnu nitrate and water or ammonia, ammonium nitrate, urea ....I * , to suit varying weather and manufacturing conditions. USES: Formulation of mixed fertilizers and for direct a((.I< SHIPPING INFORMATION: Nitrogen Fertilizer Solution ammonium content does not exceed 50% by weight). Insulated . uninsulated tank cara of 8.000 and 10,000 gal capacity and : . trucka of approximately 4.000 gal. capacity. TRI-UNA-SOL FERTILIZER SOLUTION AGRICULTURAL DIVISION STANDARD FORM: Clear water solution. ANALYSIS: Varying analysis of 28. 30 and 32% nitrogen . >u> <.n ing urea, ammonium nitrate and water. USES: Direct application to the soil and formulation of u liquid fertilizers. SHIPPING INFORMATION: Nitrogen Fertilizer Solution ; total ammonia content does not exceed 50% i Insulated .mu u insulated Lank cars of 8.000 and 10.000 gal. capacity un i - im. trucka of approximately 4.000 gal. capacity. 0684929 TOWOLDMONOQ43012 AMMONIUM NITRATE FERTILIZER PELLETS AGRICULTURAL DIVISION STANDARD FORM: Ammonium Nitrate in pelleted form coated with a conditioning agent. ANALYSIS: Nitrogen (Min.) Moiature Water ineolubie 33.5% .35% 3.0% SHIPPING INFORMATION: Ammonium Nitrate Fertiliser contaming 90% or more Ammonium Nitrate with no organic coating. Fertilizer Compounds (Mfg. Fert.) NOIBN dry in paper, poly ethylene l>ag and in bulk (Dangerous Placards Applied.) Multi wall paper hags with polyethylene lining, packaged in 100-lb. bags. HO-lb. bags scut ,'iQ-Ui. bag*. E-2 AMMONIUM NITRATE FERTILIZER PELLETS AGRICULTURAL DIVISION STAhIDARD FORM: Ammonium Nitrate in pelleted form un- ANALYSI9: Nitrogen (Min.) Moisture 33.5% .3% SHIPPING INFORMATION: Ammonium Nitrate Fertilizer con taining 90% Or more ammonium nitrate with no organic coating. Fertiliser Compounds (Mfg. Fert.) NOIBN dry in paper, poly ethylene bags and in bulk. (Dangeroua Placarda Applied). Multi wall paper bags with polyethylene lining, packaged in 100-lb. bags, 80-lb. bag*, and 50-lb. bags. Alao shipped in 50-lb. polyethylene bag* and in bulk. AMMONIUM NITRATE 83% SOLUTION AGRICULTURAL DIVISION ANALYSIS: Typical. Ammonium Nitrate Water Chlorides Iron R3.8% 16.2% 2ppm 2ppm USES: Manufacture of military explosives, Pyrotechnic compo sitions, insecticides and absorbent for nitrogen oxide as well as fertilizer uses. SHIPPING INFORMATION: Nitrogen Fertilizer Solution (total ammonium content does not exceed 50% by weight). 8,000 and/or 10,000 gal. aluminum abeam coiled tank cars. AMMONIA, AQUA AGRICULTURAL DIVISION MOLECULAR WEIGHT: 35.05 STANDARD FORM: Liquid. PROPERTIES: Pungent, water-white liquid; wt. per gal. 7 48 lbs. (26Be.). USES: A source of nitrogen for plants, either applied directly to the soil or U> irrigation water for the formulation of mixed fertilizera, for oxidation in lead chamber sulphuric acid plants and to aupply nitrogen requirements and pH control in yeast culture. SHIPPING INFORMATION: Ammoniacal Liquor (containing not more than 35% Ammonia (NHi) by weight). Tank cars or tank trucks. AMMONIA, ANHYDROUS AGRICULTURAL 0IVISI0N MOLECULAR WEIGHT: 17.03 PROPERTIES: Colorless gas, at normal temperatures and pres sure, .0597 times as heavy as air; below critical temperature. 271.2F.. readily condenses by application of pressure to a colorless liquid, wt. per gal. 5.33 lbs.: B.P.-28F. USES: A source of nitrogen for plant food, either applied direct or for formulation of mixed fertilizers, liquid or dry. Used as nitrogen source by textile, rubber, paper, petroleum industries, among others. SHIPPING INFORMATION: Anhydrous Ammonia (Dangeroua Placards Applied). Tank car* and tank trucks. NUTRIUM FERTILIZER AGRICULTURAL DIVISION SPECIFICATIONS: Nitrogen-- 29% n guarantee Ammonia N 16.2% Nitrste N 12.8% . A. P. A. 14% t. guarantee. PHYSICAL PROPERTIES: 62 Ibe./cu. ft. bulk density. SHIPMENTS: 30. 40 and 50 ton box cars, bag or bulk, 60-70 ton hopper care--bulk. Truck pickups 5 ton min., Luling, La., plant. (No contract or common carrier truck deliveries). SPECIAL NOTE: We will abip mixed cars i>{ N u l/ i r,-n n Ammonium Nitrate Fertilizer from Filling. I.a .,n,y n,, I,, price on each product will be determined by the total tom the car for the deelinetion concerned For etaniple. if Id Nutrium and 10 tons of Ammonium Nitrate Fertilizer ire i for a total of 50 tona, each product would be priced on the car baaia. PHOSPHATIC FERTILIZER SOLUTION AGRICULTURAL DIVISION STANDARD FORM: Liquid. PROPERTIES: Hecommended only for use in manufacture >f fertilizer!. Because this is a crude product no guarantee of is made except for PjOi content which will vary from '>4 ', t,, 58% P,Oi (75-80% acid). SHIPPING INFORMATION: Tank cars and tank irucka I'hoa pbatic fertilizer solution. PHOSPHOLEUM Suptf Phosphoric Acid AGRICULTURAL DIVISION GENERAL INFORMATION: A clear liquid containing approii mately 76% PiO and equivalent to 105% Hil'O, 11 i* n mpu migture of orthophoeprionc and polyphoaphoric >oil> wlm h on dilution with water hydrolyze to orthophoephoric acid Sp lir. 1.90 approx, at 75"F.; viaeoeity. 800 cenlipmeea at 7'.' F , temper ature riae, 60*F. on dilution to 75% Hil'O., freezing point, leas than minus 50C, GRADE: Food. USES: High analysis liquid fertilizer formulation, metal phoephntizing and aluminum Bright Dip Bath Component SHIPPING INFORMATION: Phosphoric Acid lank .are and tank trucks. UREA FERTILIZER GRADE COATED PELLETS AGRICULTURAL DIVISION STANDARD FORM: Urea Id pelleted form coated with an in organic material as a conditioning agent. ANALYSIS: Nitrogen (Min.) Moiature (Max.) Biuret (Max.) 45.0% .5% 1.0% SHIPPING INFORMATION: Urea having value only fur fertilizer purposes (Fertilizer Compound NOIBN). 8U-!!> multi-wall bag* with polyethylene lining. Also in bulk. UREA FERTILIZER GRADE UNCOATED PELLETS AGRICULTURAL DIVISION STANDARD FORM: Urea in pelleted form without coating agent. ANALYSIS: Nitrogen (Min.) Moisture (Max.) Biuret (Max.) 46.0% .5% 1.0% SHIPPING INFORMATION: Urea having value only for fertilizer purposes (Fertilizer Compound NOIBN) Multi-wail paper hags with polyethylene lining in 80-lb. bags. Also in bulk. PRE-EMERGENCE HERBICIDES AVADEX HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid and granular. GENERAL INFORMATION: Liquid contains 4' '1: - I chloroallyl diiaopropylthiocarbamaie. or 4 pounds m tivr mgrt-iiiant per gallon. Granules contain 10% active ingredient USES: Control* wild oats and certain other weed, n nig ,r flax and certain other crops. Liquid mixed with water. .ippm-d ** ground or aerial spray. AVADEX BW HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid GENERAL INFORMATION: Contains 46 3% I Iti.i- t.,UvI diiaopropylthiocarbamaie, or 4 pounds active ingredient i-rr , u),,n USES: Controls wild oata in barley, spring when I' .i ir. * ne.it and peas. Mixed with water, applied aa a ground or un.il ., , 0664930 9 TOWOLDMON0043013 FAR GO HERBICIDE AGRICULTURAL DIVISION - LITERATURE AVAILABLE STANDARD FORM: I-iquid GENERAL INFORMATION: Contain* 46 3% 2.3.3-trichloroally] diumpropylihinrarhamaie, or 4 pounds active ingredient per gallon. USES: Control* wild oats in barley, spring wheat and Durum wliciil. Mucd with water, applied a* a ground or aerial spray. LIMIT HERBICIDE AGRICULTURAL DIVISION STANDARD FORM: Liquid. GEN KRAI/ INFORMATION: Contain* 48 13% a-chloro-N-N-Hiallyl.ici'tnmide 14 pounds active ingredient per gallon) And II 54% 2.4 diiTiloropheno*yceti<: acid (1 pound active ingredient per USE irol* annual grasses snd broadleaf weeds in sugar cane RAMROD HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Wettable powder and granular. GENERAL INFORMATION: Granule* contain 20% 2-chloro-Nisoptopylacetsnilidc. Wettable powder contains 85% 2-chloro-Nuuipropylaretsnilide. USES: Controls both grassy snd msny broadleaf weeds in hybrid seed corn, field corn and seed soybeans. RANDOX HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid and granular. GENERAL INFORMATION: Liquid contains 47 1% a-chloro-NN-diallylaretamide, or 4 pounds of active ingredient per gallon. Granules contain 20% CDAA as active ingredient. USES: Controls annual grasses in corn, soybeans, onions, sorghum and certain other crops. RANDOX T HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid and granular. GENERAL INFORMATION: Liquid contains 28.1% a-chloro-NN-riiaJlylaretamide and 57.6% trichlorobenzyl chloride, or 3.1 pounds of CDAA and 6.3 pounds of TCBC a active ingredient per gallon. Granules contain 11.7% CDAA and 23.3% TCBC as active ingredient. USES: Controls annual grasses and certain broadleaf weeds in ROUNDUP HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Wettable powder and granular. GENERAL INFORMATION: Contains 2-chloro-N-ieopropylacetanilide plus 2.4-dicblorophenoxyacetic acid. USES: Controls annual grasses and broadleaf weeds in field corn. VEGADEX HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid sod granular. GENERAL INFORMATION: Liquid contains 46 4% 2 chloroallyt diethyldithioearbamaie. or 4 pounds active ingredient per gallon. Granuloa contain 20% CDEC per gallon, USES: Controls csrtain annual grasses and broadleaf weeds in a variety of vegetable crops. SHIPPING INFORMATION: Weed Killing Compound. NOIBN. WALLOP HERBICIDE-INSECTICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Granular. PROPERTIES: Contains 10% Parathion (o-o-diethyl o-p-nitrophenyl nhoephorothioate) plus 8.3% Ramrod (2-chloro-N-iaopropylacelanilidel. G ENERAI, INFORMATION: A combination herbicide and insecti cide for use in areas of known resistant corn rootworma. USES: Used to control resistant com rootworma and certain weed* in hybrid seed corn and field corn. . HANDLING PRECAUTIONS: DANGER statement. POISON emblem and antidote required by law. 10 POST-EMERGENCE HERBICIDES LAMBAST HERBICIDE AGRICULTURAL 01VISION -- LITERATURE AVAILABLE STANDARD FORM: Liquid GENERAL INFORMATION: A "contact'' herbicide containing 25.5% 2,4-bia (3-metho*ypropylamini>)-6-metbylthio--triazme. nr 2 pounds active ingredient pet gallon. USES: Controls lambsquarter and certain other weed* m safflower Mixed with water, applied as a ground ur aerial spray. LION* HERBICIDAL OIL NO. 1 HYDROCARBONS ANO POLYMERS DIVISIONLITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: A noat-emergenre contact herlmnle produced by carefully controlled petroleum refining. It is ram |>letely volatile and leaves no residue It ia non-corrosive, in<l u* USES: A safe and economical herbicide for weed control m cot ion and soybean*. Applied as a spray. SHIPPING INFORMATION: Petroleum Naphtha. Tank cars LION* HERBICIDAL OIL NOS. 6 AND 7 HYDROCARBONS AND POLYMERS DIVISIONLITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: Non-aelective. general contact herbi cides produced by carefully controlled refining from a crude nil naturally high in aromatic compounds. They are slowly volatile and leave no permanently toxic or oily residues when used at recommended rates. Kill only those plants on which they are actually sprayed. USES: For control of weeds and grasses on railroad rights-of-way. and wherever a general contact herbicide ia required. Applied as a spray. SHIPPING INFORMATION: Petroleum distillate fuel oils nut suitable for illuminating purposes. Tank cars. ROGUE HERBICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: Contains 46% 3.4-dichioroprnpionanilide. or 4 pounds active ingredient per gallon. USES: Controls barnyard grass (watergrasa) and certain other weeds in rice. Mixed with water, applied as a ground or aerial spray. SHIPPING INFORMATION: Weed Killing Compound. NOIBN. HORMONE HERBICIDES AGRICULTURAL DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: Hormone-type herbicide* selectively destroy certain species of unwanted weed and brush peats, depend ing upon the formulation used. These organic herbicides enter the circulatory system of susceptible plants to completely upset the growth pattern, resulting in dsath from alteration of enzyme activity, WEED KILLERS: 2.4-P AMINE: Contains 49.5% dimethylamine salt of 2.4diihlorophenoxyacetic acid, equivalent to 41.1% ot 4 pounds 2.4-D acid per gallon. 2.4-D ISOPROPYL ESTER: Contains 45.2% isopropyl eater of 2.4-dichloropbenoiyacetic acid, equivalent to 38% or 3 34 pound* 2.4-D acid per gallon. 2.4-D BUTYL ESTER: A low concentrate formulation containing 41.4% butyl eater of 2,4-dichloropheno*yacelic acid, equivalent to 33% or 2.67 poutida 2,4-D acid per gallon. 2.4-D BUTYL ESTER CONCENTRATE: A high concentrate forum lation containing 57.6% butyl ester of 2,4-aichlorophenoxya, eiuacid, equivalent to 46% or 4 pounds 2.4-D acid per gallon. 2.4-D LOW VOLATILE ESTER: Contains 69.7% iaooctyl ealer of 2.4-dichiorophenoxyacetic acid, equivalent to 46 2% or 4 pound* `2,4-D acid per gallon. 0684931 TOWOLDMONOQ43014 2.4-1) GRANULAR: A formulation of 2.4-dirhlorophenyoxyaeetic and low volatile ester on 20-40 mesh sttapulgite clay granule*. Contains .30.2) iaooctyl ester of 2,4-dichloroplienoxytcetic acid , equivalent to 20% or 10 pound* 2.4-1) acid per 50 pound bag. MCP AMINE: Similar in action to 2,4-1), hut certain crops, rich us flax, nre, oat* and some clovers, are more tolerant of MCP than 2,4-D. Formulation contain* 52 0% dimethylamine salt of 2-melhyl-4-cliloronhenoxyacelie acid, equivalent to 42.51* or 4.0 pounds of the acid per gallon. CROP-GUARD*: A highly concentrated formulation of 51.4% isnbutyl eater and 26.5!- butyl ester of 2.4-dichiorophenoxyaretic m id, equivalent to 62.2I or 6.0 pound* of 2,4-D acid per gallon. FIELD-CLEAN *: A highly concentrated formulation of 94 5% iHooctyl ester of 2,4-duhforophenoxyaretic acid, equivalent to t!2.7<v,. or 6 pounds of 2,4-D acid per gallon. BRUSH KILLERS: 2.4-D 2.4,5-T AMINE: Contain* 29.7% triethylamine salt of '.'.t-iiichlorophenoxyacenc acid and 28 5% triethylamine salt of I'.l.'i-tricbloroplienoiyacetic acid, equivalent to 20.3% or 2 pound* of 2,4,5-T acid per gallon. 2.4-1) `2.4.5-T ftllTYI. ESTER: Contain* 27 5% butyl ester of 2.4-dichlorophcnoxyacetic acid and 26.7% butyl eater of 2,4,5trichlorophenoxyacetic acid, equivalent to 21.9% or 2 pounds of 2.4-1) acid and 21.9% or 2 pound* of 2.4,5-T acid per gallon. 2.4-1)'2,4,5-T LOW VOLATILE ESTER: Contain* 34.5% iaooctyl ester of 2,4-iiichlnrophenoxyacetic acid and 33.0% iaooctyl eater of 2,4.5-lricblorophenoiyaretir acid. Equivalent to 22.9% or 2 pound* of 2,4-1) acid and 22.9% or 2 pounds of 2,4,5-T acid per gallon. 2.4.5-T AMINE: Conlaina 56 5% triethylamine salt of 2,4.5iriclilorophenoxyaietic acid, equivalent to 40.5% or 4 pounda of 2.4.5-T acid per gallon. 2.4.5-T BUTYL ESTER: Contain* 37.5% iaobutyl eater of 2,4.5trichlorophenoxyacetic acid and 15.3% of n-butyl ester of 2.4.5irichlocophenoxyacetic acid, equivalent Vo 43.3% or 4 pound* of 2.4.5-T acid per gallon. 2.4,5-T LOW VOLATILE ESTER: Contain* 65.3% iaooctyl eater of 2,4.5-tricbloronhenoxyacetic acid, equivalent to 45.4% or 4 pounda of 2,4,5-T acid per gallon. IIKUSH-O-CIDE*: A highly concentrated formulation of 46.6% iaooctyl eater of 2.4-dichlorophenoxyacetic acid and 44.5% iaooctyl eater of 2.4,5-tnchlorophenoxyacetic acid. Equivalent to 30.9% or 3 pounda of 2,4-D acid and 30 9% or 3 pounda of 2,4.5-T acid per gallon. BRUSH-BLITZ*: A highly concentrated formulation of 88.0% iaooctyl eater of 2,4.5-lrichlorophenoxyacetie acid, equivalent to 61.1% or 6 pounda of 2.4.5-T aetd per gallon. SHIPPING INFORMATION: Weed Killing Compound (NOIBN); Brush Killing Compound (NOIBN). INSECTICIDES ETHYL PARATHION AGRICULTURAL DIVISION --LITERATURE AVAILABLE MOLECULAR WEIGHT: 291.3. STANDARD FORM: Liquid. PROPERTIES: Dark brown liquid: crystallizing minimum; 10.5-10.7 lb*./gal. at 77*F, (25*C.). point 0'C. GENERAL INFORMATION: Parathion i* the designated common name of the German developed insecticide, O-O-diethyl O-pnitrophenyl phoephorotbioate. having the aynonyma of E-605; O.O-diethyl O-p-nitrophenyl thiophoaphate; diethyl p-nitrophenyl thionophoaphate. It control* a broad range in inaecta. aa well a* mitea. and has residual effect. It therefore poaeo--ee certain advan tage* over standard insecticides and miticide* and has established iia^ place among the ranks of modem and effective organic ioaecti- HANDLING PRECAUTIONS: DANGER statement. POISON emblem and antidote required by law. Parathion is an extremely poisonous material and the customer should clearly understand that it must be handled and formulated with great care. Parathion is highly toxic by any route, whether it be by Bwallowing. inhaling or absorption through the akin. In addition, the customer muat be told that formulations containing this material are also extremely toxic and the same care should l>e exercised with all formulations to insure safe use. Complete precautionary information is available upon request. SHIPPING INFORMATION: Parathion. Liquid (Chemical*, NOIBN): Class B poiaon and product label required; not mailable. 55-gal. ICC 17C. 16 gauge, black iron drum* lined with one coat A & W 4A lacquer, 2-ii\ch and 54 -inch Trisure fittings in head, 550-Iba. net. Monsanto sella Ethyl Parathion only to agricultural insecticide fnrmulatora who are skilled in the handling, formulation and distribution of poisonous insecticidea. METHYL PARATHION AGRICULTURAL DIVISION - LITERATURE AVA.'lAflLF MOLECULAR WEIGHT: 263.1 STANDARD FORM; Liquid PROPERTIES: Technical methyl parathinn. i wrm ..... I aa an 80% solution in xylene Tin* very concern r n.-q a liquid above 65JF fl8 3Ci. t-egin* to rryii.ih/e n i perature dropa. For this reason, methyl i>.ir.tthion d-,l. at temperature* above 65*F fI83V i Must nut be bi-inl.'Il'F (55'C.). 10 2-10 .1 Iba gal at77*F r.;vr. GENERAL INFORMATION: Methyl Parathion. DO dim. p-nitrophenyl nhnaphorothioate. is approved (or jie on fruit*, vegetables, forage and other crop* Ai i|i>a.ig<>.4 .. one pound of technical material per .nre, n vill etleiuveiv wide spectrum < mtrol of boll wee ie pink bollworm. Monsanto sells Methyl Parathion only to igrn u). or d ,oformulatora who are skilled in the handling, lornmi.ui distribution of poisonous insecticides HANDLING PRECAUTIONS: DANGER n .,t,p emblem and antidote required on label Methyl Parathion i* an extremely poisonous m.iieri.d customer should clearly understand that it must b>- n.m.1 formulated with great care Methyl Parathion 'a highly i any route, whether it be by swallowing, inhaling or d,, through the skin. In addition, the customer most he i. formulations containing tin* material are also eitrem.lv the tame care should 1> exercised with all formulations t. SHIPPING INFORMATION: Methyl Parathion I. cals. NOIBN); Claaa B poison and produ. t l ibel r.-.pim-d. not mailable, 55-gal. ICC I'C. 16-gauge, black non dr.irn-i lin.-d *;t)j one coat A 4 W 4A lacquer. 2-incb an<i 'i-mch Insure utimgs in head, 550-lb. net. NIRAN 6-3 INSECTICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: Contain* 58 26% O.O-diethyl O p-rntrophenyl phosphorothioat* and 29.01% O.O-dimethyl O p ini n.pheuyl pboephorothioate a* active ingredients. Equivalent to n poomls of ethyl parathion and 3 pounds of methyl parathion per gallon USES: Controls bollworm* and boll weevil* in cotton and ertain other crop*. HANDLING PRECAUTIONS: DANGER statement PolSD.N emblem and antidote required by law. NIRAN 10-G INSECTICIDE AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Granular. PROPERTIES: Contain* 10% O-O-diethyl Op ............... phoipborothioate aa the active ingredient. USES: Used to control resistant com rootworm* HANDLING PRECAUTIONS: DANGER statement HHSON emblem and antidote required by law. NIRAN 10-10 INSECTICIDE (SOIL) AGRICULTURAL DIVISION-LITERATURE AVAILABLE STANDARD FORM: Granular. PROPERTIES: Contain* 10% Parathion (O-O.diethvi " .. ,.,iro- Ehenyl pboephorothioate) plus 10% Aldnn t9 % w II. a i. - i,,r>exahydro-endo, exodimethanonaphthalene and u 5 . * r . t .iM compounds). USES: Used to control reaistant corn roolwi>rma u i borne insects. - mil HANDLING PRECAUTIONS: DANGER stae rm -u emblem and antidote required by law. i -nN SANTOCHLOR para-DlCHLOROBENZENE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 147.01. STANDARD FORM: Crystal*. PROPERTIES: White crystals, crystalliling po>m i GRADES: Standard ciyt*I sixes: No 0 (approx . ,. . . . For peachtree borer* and for insecticide and m:,. ... - .. s No. 1 (approx. H inch nugget*)--For shaker tup , it (approx, rice-aixe granule*)-- A combination nf t*< n . .-.t cryatala. For shaker too cans and fur ..... No. 814--80% min. between 8 and 16 menh U. . . . Mixture of sizes under 7 meeh. Fine#-- Mixture . ( - , ,n 16 meeh. USES: A* a mothicide, for masking odors, for ihi- -n tree borer* When vapor* are confined, Sanhu htu' n . ' for mildew control. SHIPPING INFORMATION: Paradichior..U-n:,.l 100-lb. fiber drums. 1 0684932 TOWOLDMON0043015 STABILIZED METHYL PARATHION AGRICULTURAL DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 263.3. STANDARD FORM: Liquid. PROPERTIES: Stabilized Methyl Parathion is a light brown mobile liquid sold aa a 80% solution in xylene plua stabilizer. , Crystallizing point 61*F (16*C.). Must cot be heated above m*K. IWC.) 9 0 iba./ga). at IVY. (25`C). GENERAL INFORMATION: Stabilized Methyl Parathion O.Odimelhyl O-p-nitrophenyl phoephorolhioate. is recommended for ue in the manufacture of dust formulations only. Approved for use on cotton At dosages of 0.2b to 0.6 Ibe. of technical material l>er acre. Methyl Parathion will effectively control a wide apectium of inaecta including aphids, tome mite apeciea. cotton leafworm. and boll weevil. It ia not effective against the bollworm, the pink Lobworm or two-spotted spider mite. Monsanto sells Stabilized Methyl Parathion only to agricultural insectic ide forinulatora who are skilled in the handling, formulation and distribution of poisonous insecticide*. HANDLING PRECAUTIONS: DANGER statement. POISON em blem and antidote required by law. Methyl Parathion is an extremely poisonous material and the customer should clearly understand that it must be handled and formulated with great care. Methyl Parathion ia highly toxic by any route, whether it be by swallowing, inhaling or absorption through (he akin. In addition, the customer must be told that formulations containing this material are also extremely toxic and the same care ahould be exerciaed with all formulationa to insure safe use. SHIPPING INFORMATION: Methyl Parathion. Liquid (Chem icals. NOIBN): Claaa B poison and produce label required; not mailable. 66-gal. ICC 17C. 16 gauge black iron drums, lined with one coat of A & W 4A lacquer. 2-inch and Si -inch Trisure fittings in head. 640-lba. net. WALLOP HERBICIDE-INSECTICIDE See listing under "PRE-EMERGENCE HERBICIDES." PRESERVATIVE STOP SCALD* FRUIT SPRAY AGRICULTURAL DIVISION-LITERATURE AVAILABLE ANALYSIS: Active Ingredient'. l,2-dihydro-6-etboiy-2,2,4-lrunethylquinoline............ Inert Ingredients:.......... ............................................. 70% 30% "Equal to 6 pounds of athoxyquin par gallon STANDARD FORM: Liquid. USE: Mixed with water and used as either a spray or a dip. Slop Scoid prevents common scald of apple* and peer* in atoraga. SHIPPING INFORMATION: Chemicals NOIBN, 1 gallon and 5 gallon containers. BUILDING PRODUCTS FOME-COR BOARDS PLASTIC PRODUCTS AND RESINS DIVISIONLITERATURE AVAILABLE Fomt-Cor board ia a sandwich laminate of polystyrene foam be tween paperboard Uner facings. The polystyrene foam core combined with one of several facings contribute many unusual properti**: licht-weigbt, moisture barrier, insulation, rigidity, eroboaaability, durability for outdoor and indoor applications, dimensional stability, and structural strength. Fomt-Cor boards are available in size* ranging from 24' to 72* wide and 40* to 140* long. Type 246A 246M 250A 3271* 327W 327WL 320BSL 420A '420AE 420AL 420M 425SE 820A 42/ Natural Kraft 42/ Mottled Kraft 42* Natural Kraft 42/ Kraft (one aide) 50/ Clay-coated Kraft (other aide) 50/ Clay-coated Bleached Kraft 50/ Clay-coated Bleached Kraft 42/ Self-extinguishing, High Wet and Natural Jute 42/ Natural Kraft 42/ Natural Kraft 42/ Natural Kraft 38/ Self-extinguishing, Natural Jute 42/ Natural Kraft 38/ Self-extinguishing, Natural Jute 42/ Natural Kraft 12 I/mgboard form: Scored and folded 'accordioni every 24* .!,,,,* width. Bundle* 480 feet long available. Edge crush: l* compreaeed edge along hoard length for lap.joint construction. PACKAGE AND SIZES: Skid Packaging Fully Protected Stock standard sizes and custom mill size* Standard sizes. Width* ix* 60*. 72' -- all 96' long. ' Box Package -- Stock standard sizes only: 24* x 36 \ 36* i 4H' 48' t 96', 40' x 60*. 30' x 40'. 28' x 44*. 28' x 22'. ' USES: Mobile Home Insulation and Barrier - Light-weight, eaavto-mstall Fomt-Cor longboard and lap-joint board gives matimum moisture protection and superior insulation over competitive sheathing materials in Mobile Home subroof and sidewall applies. Display* and Graphic Arts -- Strong, light-weight, emboaaable anil dimensionally otaole. Fomt-Cor panels are particularly appealing to designers and user* of Point-of-Purchaee materials. Fomt-Cor ia easily die-cut, embossed, scored and folded Fomt-Cnr panel*, available with a range of facing*, natural kraft. clay-coated bleached kraft. and mottled kraft are ideal for printing, silk-srreening, illustration, and mounting. Automotive -- The versatility of Forne-Cor find* wide application in automobilee and trucks. Being an excellent inaulant ana moisture barrier, it can be used aa door panels, quarter panels, head liner*, and package trays. Container* -- Fome-Cor can be processed on conventional equip ment to make boxes and cartons. This, together with it* highly moisture aDd chemical resistant core, light-weight, dimensional stability and insulation valve, haa led to widespread intermt and commencal application# in packaging. GER-PAK POLYETHYLENE SHEETING PLASTIC PRODUCTS AND RESINS DIVISIONLITERATURE AVAILABLE Moisture vapor barrier in rolls. USES: Under concrete slab*, over studding, concealed flashing, crawl space lining, closing in, concrete curing, protective tarps. STOCK SIZES: .001* to 010* gauge. 1 ft to 40 ft. width, 50 ft to 100 ft. leDgtb, natural, black, white colors. GER-PAK TAPE: 2' x 100' rolls. MONSANTO SEWER AND DRAIN PIPE PLASTIC PRODUCTS AND RESINS DIVISIONLITERATURE AVAILABLE Light-weight, higb-impact styrene pipe for gravity flow, buried USES: Downspout runoff, house to aewer or septic tank, foundation footing drain, septic leaching field, storm drain, lawn, farm highway drainage. STOCK SIZES: 3', 4'. 6' diameter*. 10 ft. length*, in standard and perforated types. Fittings sod cement also available. MONSANTO VINYL GUTTERS AND DOWNSPOUTS PLASTIC PRODUCTS & RESINS DIVISIONLITERATURE AVAILABLE New maintenance for white vinyl rain carrying equipment offereo as complete system. Manufactured of tough, solid vinyl, components will not chip, rust, wear away, blister, peal, support fire or conduct electricity. Doesn't need painting. Standard ''K" ("OG") shape aa designated by U. S. Department of Commerce. SHIPPING: Gutter -- twenty 10-ft. lengths. . Downspout -- twenty 10-ft. lengths . Collector -- 24..................... ... Connector -- 20.................................... End Cap (RH) -- 20.......................... End Cap (LH) -- 20........................ Inside Comer -- 24 . . . .. Outside Comer -- 24............................ Elbow (A it B) -- 24........................... Gutter HaDger -- 300...................... Monsanto Adjustable Hanger -- 10 Downspout Hanger -- 100.................. Cement-Tube -- 12.......................... MONSANTO VINYL SIDING For maintenance-free exteriors, this solid vinyl siding system doean i need painting and maintains it* sparkling surface beauty year after year. No surface finish to chip or peel -- the color goes all the way through. It ia self-extinguishing and extremely resistant to corrosion such as seaside or ui heavy industrial atmosphere* It shrugs utf i bv impact of driving hail, rocks and accidental bump*. It does rmi require bonding or grounding for lightning protection. Available m 8* and 6* horizontal aiding with or without backerhoard .Un available in vertical. PACKAGING: Vinyl Siding: 2 aqua res (200 aquare feet) per carton 0684933 TOWOLDMON0043016 PROTECTIVE SHEETING GER-PAK POLYETHYLENE SHEETING PLASTIC PRODUCTS AND RESINS DIVISIONLITERATURE AVAILABLE USES'. Mulch. greenhouse cover*, fumigation cover*, row covers, (Kind liners, silage covers, protective tarps STOCK SIZES: .001* lo .010* gauge. 1 ft. to 40 ft. width. 40 ft to '< x 100 ft. roll*. GKIt-PAK TAPE: 2 in. * 100 ft. roll*. SILENT-COR SOUND DEADENING BOARD PLASTIC PRODUCTS AND RESINS DIVISIONLITERATURE AVAILABLE Silenl-Cor sound deadening board ia a flat sheet laminate of closed cell polystyrene and paper facings designed to reduce level of sound transmitted through walls, ceilings and floors. Width Length 8' 10' 12' PACKING: Taped 20 sheeta per bundle. Net Weight: approi. 105 lba./bdl. 4' * 8' approi. 131 lbs. bdl. 4' i 10' approx. 157 lbs./bdl. 4' x 12' H'Thickness H' TIRamic* FLEXIBLE CERAMIC PANELS NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE Higbtet quality ceramic tile* 1' x 1* or 2* x 2' chemically coupled into urethane grouting to form a panel 24' x 24'. The appearance and maintenance advantage* of ceramic tile are supplemented and enhanced by the atain resistant grout which also exhibits bacterio static and fungistatic activity. The resilient grout matrix permits conformity to minor irregularities in substrate, movement due to temperature variation, thermal shock and minor substrate cracking. Invisible sesms may be aealed to form waterproof surface. Recom mended in any area where good appearance, durability, clean sanitary conditions are desired such as kitchen*, restrooms, locker rooms, showers, hospitals, food handling areas, etc, TYTRON* FLOORING SYSTEM NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE Unique material made end installed by Monsanto a* a system to provide unsurpassed advantage* in high performance flooring applications. High level appearance, low time and cost of mainte nance and extreme durability recommend its use in heavily trafficked areas such as lobbies, corridors, public areas, educational facilities and transport. Special values such as stain resistance suggest use in food service areas, hospitals and laboratories. Suitability for renovation work is enhanced by one-day installation. TEXTILES DIVISION MAN-MADE FIBERS BLUE "C" POLYESTER STANDARD FORM: Staple and ;,,w. GENERAL INFORMATION: Demers aDd staple lengthfor blending with cotton, ray.m and other textile fiber* USES: Apparel fabrics, industrial and military fabrics w.i.i-n ui i knitted, and carpets and rugs. CONSUMER PACKAGED PRODUCTS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE Product line includes Cushion Mat. Saft-T-F.dgt. Tidy Mol plastic floor runners from fi tl prepack: ft. bulk rolls; plastic DUBL-TUF tarps. gromr 15' x 20' size; Sure-Hold self-adhering grommet* t plaitic sheeting, pltic drop cloth*, plastic utiliiy GARDEN HOSE (MONSANTO, GERINGc BRANDS) PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABI E Complete dealer line* of vinyl and rubber-vinyl garden h<w pro- ELECTRONIC PRODUCTS INSTRUMENTS COUNTERS Sst Pigi 16 DIGITAL CLOCK MODEL SOSA See Pig* 16 DIGITAL PROGRAMMER MODEL 501A See Ptgt 16 SIGNAL SOURCES Sit Pigt 16 ACRILAN ACRYLIC FIBER STANDARD FORM: Staple aod tow. GENERAL INFORMATION: Full range of denier* in a variety of staple lengths or tow. Solution dyed Acrdan also availabls. USES: Awning fabric*, blankets, carpets (including indoor-outdoor), comforters, deep pile fabrics, flannel-type fabrics, furniture wraps, half hoae. jersey knits, knitting yams, pile fabrics, pile liners, sweaters, wool system blends, worsted blends, woven goods and upholstery fabrics and sand bags. BLUE "C" NYLON AND CUMULOFT NYLON STANDARD FORM: Filament yarn*. GENERAL INFORMATION: Available in monofilament, textile multi-filament and modified croaa-eeclion yarns; also textured yarns, tire yarn and industrial yarns. USES: Carpets, coaled fabrics, cordage, hosiery, industrial webbing, rasc-hcl knitting, surgical hosiery, texturizing, thread, tire cord, tricot fabrics, cordage, upholstery fabric*, woven fabric*, weaving md braiding, and military fabrics. LIGHT-EMITTING DIODES AND ARRAYS INFRARED EMITTER Ml 20B1 Gi/liurt) Arstnidt Diodt NEW ENTERPRISE 0IVISI0N-UTERATURE AVAILABLE The Ml 20B1 is an infrared radiation source consist mg of i g hi i.,m arsenide mesa diode mounted on a TO-18 header with ,i pmu-, t mg cover of epoxy. When the device ia forward biased above 1 0 volt* it .nut- <! irplv peaked radiation al 0.9 microns by recombination r.i li it i. ,n ..f electrons injected into the p-layer. The MI 20B1 matches efficiently with silicon detector- pr -v enough radiated power to work in common mode i.-ol.u :.m , mi reading, and chopping applications It ia used to t.i-c .i.lv.m total electrical isolation by photon coupling ith ,i,,: ,, liability, low input power, ana excellent external r.i. 11,i {,, ,-r 13 0604934 Ik TOWOLDMONOQ43017 TOWOLDMONOQ43018 INDIUM ARSENIDE Electronic Grade NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: Single crystal Czochralaki nominal diameter 1.5 centimeter end polycrystal indole with rectangular cross section 1.5 X 2.0 centimeters and weighing up to several hundred grama. PURITY: Available in various ranges of carrier concentrations, resistivities, mobilities and Hall coefficients. USES: Ultra-high purity Indium Arsenide for use in the manu facture of electronic semiconductor devices. SHIPPING INFORMATION: Special containers according to form and quantity. Individual ingots packaged in polyethylene sleeves with data shoet. INDIUM ANTIMONIDE Electronic Grade NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: Single crystal Czochralaki nominal diameter 2.5 centimeters weighing up to several hundred grama. PURITY: Undoped and doped In various ranges of carrier con centrations, resistivities, mobilities and Hall coefficients. USES: Ultra-high purity Indium Antimonide for use in manu facture of electronic semiconductor devices. SHIPPING INFORMATION: Special container* according to form and quantity. Individual ingots packaged In polyethylene sleeves with data sheet. INDIUM PHOSPHIDE Electronic Grade NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: Polycrystal ingots with semi-circular cross section approximately 2.0 centimeters wide end weighing approxi mately 50 grama. PURITY: Available in various ranges of carrier concentrations, resistivities, mobilities and Hall coefficients. U8E8: Ultra-bigb purity Indium Phosphide for uae in the manu facture of electronic semiconductor devices. SHIPPING INFORMATION: Special container* according to form and quantity. Individual ingot* packaged in polyethylene sleeve* with data sheet. 08-46 TYPE IV HIGH TEMPERATURE HYDRAULIC FLUID FOR AIRCRAFT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A clear amber liquid with outstanding hydraulic properties over -85"F. to 560"F, temperature range. USES: High temperature hydraulic for both airborne and ground environmental applications. SHIPPING INFORMATION: Chemicals NOIBN. 1-qt. cans; 1-gal. can*: 6-gal. cans; 54-gal. drums. SILICON Electronic Grade NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: Single-crystal float zone ingot*; singlecryital Czochralaki ingot*; alicea, lapped wafer* end polished wefere of both float zone end Czochralaki material; epitaxial silicon wafers; polycrystal silicon as rods, chunks or unit crucibts chargee. PURITY: Leas lhan 0.2 part* per billion bate boron content. Dopant* added to achieve reactivity level* desired by customer*. GENERAL INFORMATION: Material available in varioue electrical resistivity ranges, conductivity types, diameters, lengths, wafer thickpmens. etc., according to individual customer require- USER: Single-crystal silicon used directly in tbe manufacture of semiconductor devices such as diodes, rectifiers, transistor* and solar cells. Epitaxial wafers are also used for transistor* and diode manufacture as well as integrated circuit*. Polycry*tal silicon is used in the production of single-crystal ingot* vi* tbe CzochraUki or float tone technique*. SHIPPING INFORMATION: Special container* eccording to form end quentity. Data sheet* on material enclosed with shipment. EQUIPMENT AND INSTRUMENTS BRINK CASCADE IMPACTOR INORGANIC DIVISION-ENGINEERING SALES DEPARTMENT LITERATURE AVAILABLE STANDARD FORM: Model B i* a 1 ri ' diameter hy 15* mg hollow cylinder container, five in-line stages each of which has a jet that uses a collection cup as an impaction plate. Material of construction is 316 stainless steel. Used in conjunction with Model RMS-9 PERFORMANCE CHARACTERISTICS: Collects mist particles from a gaa stream in several fractions ranging from greater than 1 microns to less than 0.5 microns at pressures up to 100 psig INDUSTRIAL APPLICATIONS: Sampling various air and gas streams for assessment, monitoring and control of air pollution, process stream contamination, etc. SHIPPING INFORMATION: Express, parcel post, air freight, etc BRINK COALESCER INORGANIC DIVISION-ENGINEERING SALES DEPARTMENTLITERATURE AVAILABLE STANDARD FORM: Filler bed packed between metal or poly ester screens In cylindrical or circular form. PERFORMANCE CHARACTERISTICS: Coalescence and iiepara tioD of finely dispersed or emulsified liquid phases under a variety of environmental conditions. INDUSTRIAL APPLICATIONS: Separation of various aqueous end organic liquid phases. Test unit* are available. SHIPPING INFORMATION: In crate* by truck, rail or ahip. BRINK FILTER INORGANIC DIVISION-ENGINEERING SALES DEPARTMENT-- LITERATURE AVAILABLE STANDARD FORM: Fiber bed packed between metal or poly ester screen* in cylindrical, circular or rectangular form PERFORMANCE CHARACTERISTICS: Removes very fine solid particulate matter from gas and liquid streams at efficient m up to 99.9+%, depending on deeign at low initial preeaure drops. Operates in a wide range of environment* similar to the Hnnk Mist Eliminator INDUSTRIAL APPLICATIONS: Used for removal and or rollertion of small quantities of solids which may he valuable nr lone or contaminating, etc., such as platinum catalyst in nitric and plants, air-borne duet*, radio-active materials, virus, bacteria, organic or carbonsieus materials, etc. Test unit* are available SHIPPING INFORMATION: In crate* by truck, rail or ship BRINK MIST ELIMINATOR INORGANIC DIVISION-ENGINEERING SALES DEPARTMENT LITERATURE AVAILABLE STANDARD FORM: Fiber bed packed between metal or poly ester screen* in cylindrical, circular or rectangular form H:gh efficiency and high velocity types available. PERFORMANCE CHARACTERISTICS: Remove* sub micron liquid milt* and entrainment from all type* of gaa atrcama at efficiencies up to 99.9+% , depending on deeign at preeaure drupe aa low sa a few inches of water. Will operate over a wide range of temperatures and pressures in acidic to basic environments INDUSTRIAL APPLICATIONS: Solution to air pollution ,.nd in process contamination miat problems in plants nirinuf.n iurutg chlorine, sulfuric acid, nitric acid, phosphoric acid, ammonia, aulfinated detergent*, chlorinated products, respectively Also used in many other chemical processes and in general applu unmt such as compressed air and other gases. Teat units are available SHIPPING INFORMATION: In crate* by truck, rad or ship. BRINK MIST SAMPLER INORGANIC DIVISION-ENGINEERING SALES DEPARTMENTLITERATURE AVAILABLE STANDARD FORM: Model BMS-9 consists of a glass cy. lme and a glass fiber filter. Removes mist particle* from gas stream* it essentially atmoapheric pressure. Sampler is contained m a tempera ture-controlled cabinet. A calibrated orifice meter is included PERFORMANCE CHARACTERISTICS: Collect* mist panicle* in two fractions; greater than 3 microns, and equal to and -** than 3 micron* for measurement and analysis to ................ mint loadings in gas streams. INDUSTRIAL APPLICATIONS: Sampling various air mi gas stream* for assessment, monitoring end control of jh p..ikiiam SHIPPING INFORMATION: EipreM. parcel poet, .ur freight. etc 0684936 It 15 TOWOLDMONOQ43019 BRINK SPRAY CATCHER INORGANIC DIVISION-ENGINEERING SALES DEPARTMENT STANDARD FORM: Fiber bed packed between metal screen* io rectangular or circular IYamo PERFORMANCE CHARACTERISTICS: Removes entrainment Hn.l spray part idea from all type* of gas at reams down to low micron size# will) essentially 100% efficiency at pressure drops of 1-2" of water Will operate over n wide range of temperatures and pressures in acidic lo basic environment*. INDUSTRIAL APPLICATIONS: Removal of entrainment and spray from u>.process and exit gas streams to reduce air pollution, yield Inases, product i oiitamination, etc. Useful following absorbing towers, distillation columns, evaporators, reactors, etc in a variety of prcxeanes. SHIPPING INFORMATION; In crates by truck, rail or ship. OSCILLATING DISK RHEOMETERS ORGANIC DIVISION -- LITERATURE AVAILABLE Afonjsnfo Oscil/eting Disk Rheometer TABLE MODE!. 10 - for determination of processing and vul canization characteristics of rubber and ruober-like polymers: viscosity, induction time, scorch safety, rate of cure, lime to opti mum cure (or any percentage thereof), state of cure, and reversion and measurement of rheological properties of raw polymers. Presents dsta as a cyclic trace of modulus of rubber compound TABLE MODEL 100 for determination of same parameters as Table Model 10 but present* date in a convenient, continuous line trace of modulus versus cure time. Specifically designed foe applica tion tti prooeaa quality control. MODEL MP-10 -- for determination of the complex dynamic modulus at high shear rate as well aa all of the function* performed by the Table Model 10. MODEL MP-100 -- for determination of the complex dynamic modulus at high shear rate aa well as all of the functions performed by the Table Model 100. MODEL MP-V -- for determination of the complex dynamic modulus at high shear rate aa well as all of the functions performed hy both the Table Model 10 and Table Model 100. RHEOMETER DIMENSIONS Table Models: length 42'. width 24". height 41". Model MP's: Length 62", width 24", height 65". FLAT 8KI) RECORDER Table Models: 8H 'ill*. Model MP'i: 11' x 17', FINISH 'Fable Models: Laboratory green, baked enamel. Model MP's: 'Two-lone gray, baked enamel. APPROXIMATE SHIPPING WEIGHTS 'Table Models: 600 lbs. Model MP's. 1100 Ibe. POWER REQUIREMENTS Table Models: lib Volt, 00 amp, Single Phase. Model MP's: 11b Volt, 20 amp. Single Phase and 220/440 Volt, 5 Amp. Three Phase. COMPRESSED-AIR REQUIREMENTS 60 psi line, cylinder or portable compressor, operating pressure h0 psi. (Regulator valve and gauge built into Rheometer.) COUNTERS MONSANTO ELECTRONICS TECHNICAL CENTER. 620 PASSAIC AVENUE, WEST CALDWELL, N.J. 07006 Phone >201) 228-3800 TWX (710) 734 4334 MODEL 100A--Compact half-rack unit: Operating Modes: Frequency. 5 Hz to 12.S MHz; frequency ratio, 1 to 10*: time . interval, 10 uaec to 10* sec; single period, 10 usee to 10* sec; totalize, * 0 to 101 S digit readout; crystal clock with aging rate of 5 part* in 10' day; eenailivity, SO mV. Price $575.00 MODEL 101A Same aa Model 100A plua BCD (1-2-4-8 code) output and provision for external time base. Price $675.00 MODEL I0SA- Compact, low-coet half-rack unit. Operating mcrIos Frequency, 5 Hz to 12.5 MHz; frequency ratio 1 to 10, time interval I sec to 10' sec; totalize, 0 to 10". 4 digit readout; 5 or 6 digit readout available aa options. Line frequency clock with crystal clock available sa options. Basic price $345.00 MODEL I500A PLUG-IN COUNTER--Operating Modes: Fre quency (dc to 125 MHz) to 3 GHz with plug-in; Single period (l user to 10* sec); Period average (0.1 usee to 10 sec); Totalize direct, 0 to 10`, preecBled, 10 to 10"; Input scaling 10 to 10*-, frequency ratio 10 " to 10". Remotely programmable; sensitivity, 100 mv, H digit readout; crystal aging rale, 3 parts in lO'/day. Price (stan dard mainframe) $2,850.00. MODEL I SOS A - Mainframe operating modes Frequency, dr i,, 70 MHz; Single period. 1 usee to 10' see Period Average. 0 I use, to 10 sec; Totalize, direct. 0 to 10*. presc.ilcd. lo to 10" Input scaling, 10 to 10*. Frequency ratio. ID " to 10"; Sensitivity | ry> mV; Crystal aging rate. 1 part in 10' day: 6-digit readout. 7- .,r (. digit option* available; BCD output option available Price $1,995.00. MODEL 1510A----Mainframe operating modes Frequency d<- to 135 MHz to 3 GHz with plug-in; Totalize. 0 to 10', Frequency ratio 10-" to 10"; Sensitivity 100 mV; Crystal aging rate. ,i parts in 10* day; I part in 10* day or 5 part* in 10" day options available. BCD output f 1 -2-4-8 code, negative true), Remotely programmable option available; Basic Price: $2,495 MODEL I SI5A-- Main frame operating 70 MHz, Totalize 0 to 10*, Frequency rate lOOmV, Crystal aging rate, 1 part in 10' 3 parte in 10* day options available; L scaled from 0.1 Hz to 10 MHz in decat panel; Provision for externally supplied l 10 MHz; 6-rtigit readout, 7- or 8-digil output option available; Basic Price, $1,61 requenoy. dc lo 10"; Sennit ivit y irt m HI' day or DIGITAL CLOCK MODEL 505A MONSANTO ELECTRONICS TECHNICAL CENTER, 620 PASSAIC AVENUE, WEST CALDWELL. N J, 07006 Phone (201) 228-3800 TWX (710/ 734-4334 MODEL 505A DIGITAL CLOCK -- Highly compact half-rack continuous 24-hour digital clock, BCD printer output, provision for externally or internally supplied print command, programmed contact closure outputs, plus other remote control features 1'ri.e $675.00. DIGITAL PROGRAMMER MODEL 501A MONSANTO ELECTRONICS TECHNICAL CENTER, 620 PASSAIC AVENUE, WEST CALDWELL, N J. 07006 Phone (201) 228-3800 TWX (710/ 734-4334 MODEL 501A DIGITAL PROGRAMMER - Quick, convenient, push-button selection of predetermined test conditions, program mable by contact closure or logic level; store* up to 10 programs, 64 information biU/program on easily interchangeable cards Price $375,00. SIGNAL SOURCES MONSANTO ELECTRONICS TECHNICAL CENTER, 620 PASSAIC AVENUE, WEST CALDWELL. N.J. 07006 Phone (201) 228-3800 TWX (710) 734-4334 MODEL J00A PULSE GENERATOR--Single or dual pulse ..per ation; "Pulse A", "Pulse B" or "Pulse A, delayed Pulse H" ..or puts (through common channel) selectable at front panel. Fuller voltage or current pulse* available; Output voltage level corn mu oualy adjustable from 0.2 V to 10 V into 50ft (either polarily> >r 0 to 400 mA into Oft 4 calibrated step# plus overlapping vernier. Ouy>ut characteristics, jitter <0.05% ; overshoot <3% ; jireshoot <2% ; fiat top pertubration* <3% , Bias and/or fall time coniinu ousiy adjustable from 10 nsec to 1 msec in 6 calibrated de< .idranges plus overlapping vernier: Pulse period adjustable from 50 nsec to 200 msec in 7 calibrated steps plus overlapping vernier; Pulse B can be delayed with respect to pulse A from in nsec to 100 msec in 5 calibrated decade steps plus overlapping vernier; Widths of pulses A and B independently adjuBtahh' ir-.m 25 nsec to 100 msec in 6 calibrated decade stepa plus overlapping vernier; Base line offset, 0 to 2 V, dc, in 5 calibrated steps pm-, overlapping vernier; offset polarity independent of pulse <,,ui,,u polarity: Pulse output can be triggered (or synchronized. i-v externally supplied signal from 5 Hz to 20 MHz; Pulse trains m be gated by externally supplied gate signal; Vernier control "f pnuperiod; pulae width, and pulse B delay can be externally programm. d by analog voltage*. Pries, $1,100.00. MODEL J100A FREQUENCY 9YNTHE9IZER-- Frequency range dc to 1.3 MHz; Resolution, 0.01 Hz over entire frequency range stability better than 1 part in 10* day; Internally supplied 1 IF or 100 Hz ramps provide sweeping of up to 100% of anv sele. i-d decade; Provision for external sweeping of up to 150'1 <>f .mv selected decade; discrete frequency programming within anv - lected decade through uae of externally supplied step funt-tuui-. Full-range digital frequency programming option available, \t.v individual harmonic is lower than 45 dB below fundament u Spurious content at least 50 dB below synthesized output, i m brated output adjustable from -<-20 dBm (2.23 V, rmsi to > dBm (70.0 uV, mu) in decade steps; overlapping unrnlibr.u. u vernier adds 0 to 20 dB attenuation when desired; Fixed dBm (22.3 mV, rms) output also avadable: can be used sun laneoualy with variable output; Provision for amplitude uu.d,,,, lion up to 50% from dc to 40 KHz; Provision for fre.pim. v modulation from dc to 100 KHz; deviation range, -t-7.V'r of .mv selected decade. Price $3,950.00. 0684937 TOWOLDMONOQ43020 FOOD INGREDIENTS ACIDULANTS ADIPIC ACID, FOOD (F.C.C.) AND TECHNICAL GRADES ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 146.14 STANDARD FORM: White crystalline owder. SPECIFICATIONS: food Credo Whiti rrystalline powder; Assay 1*9 7`a min.; Melting point first menisc , 152.0C. min.; complete melt 152.9C. min.; Ash 12 ppm max. Iron 2 ppm max.; Water 0 2% ms*. Technical grade: Aauv 99.7% min.; M. P. lf,2.0C. min.; Aah 12 ppm max.; Color (20 grants in 100 ml methanol) APHA 10 max.; Water 0.2% max.; Iron 2 ppm max. GRADER: Food and Technical. USES: Food Grade: Used as an acidulant in any food where not precluded hy the standard of identity. Technical Grade: Used in the manufacture of nylon, plasticizers, surfactants, detergents, waxes, paper finishes, costings, saturated and unsaturaled polyesters, etc. Its chief function is to control viscosity and impart softness and flexibility to cured reelns. SHIPPING INFORMATION: Acid NOIBN dry. 50 lb. bag. CWS FUMARIC ACID, FOOD (F.C.C.) GRADE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: White, finely ground powder. SPECIFICATIONS: While, finely ground powder; Assay 98.3% min. fumaric acid. 0.39% DSS (dioctyl sodium sulfosuccinate); max. particle size 5-25 microns. USES: Used now in dry beverage basis because of its rapid solu bility in cold water. Should be considered wherever a rapidly soluble, fruit flavored acid is needed. SHIPPING INFORMATION: Acid NOIBN dry. FUMARIC ACID, FOOD (F.C.C.) AND TECHNICAL GRADES ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT; 116 07 STANDARD FORM: Fine crystals or granular. SPECIFICATIONS: Food Grade: Fine crystals or granular; Assay 99 6% min.; Moisture 0.25% max.. Iron 3 ppm max. Technical Grade: Assay 99.6% min.; Ash 0.01% max.; Color (5% in alcohol) APHA 10 max.; Iron 3 ppm max.. Moisture 0.26% max. GRADES: Food and Technical. USES: Food Grade: Uaed in fruit-flavored beverages, pie fillings, gelatin desserts, wine, refrigerated biscuit doughs, jelling aids and sour rye bread. Should be considered wherever citric acid, tartaric acid, malic acid or potassium bilsrtrate are now used. Technical Grade: A resin intermediate in surface costings, printing ink and polyester resins. SHIPPING INFORMATION: Acid NOIBN dry. 250-lb. fiber drums and 50-lb. bags. H. T. MONOCALCIUM PHOSPHATE See Pege 18 LACTIC ACID, FOOD AND TECHNICAL GRADES ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 90.08 STANDARD FORM: Liquid. SPECIFICATIONS: Food Grade: Clear liquid; Color 50 APHA max.; Aasay for 50% concentration, 50% min. total acidity as lactic arid; for 88% concentration, 88% rain, total acidity as lactic and. Technical Grade Clrnr liquid. Cnlur 'no GRAPES: Food and rochnica' USES: Food Grade Used as a food acuiulant n green i... i . ,r bonated beverage*. jams, jellies. sherbet*. food crmiluriivn kc I egg whites, pickle products, beer. cheese and other d.i.rv it . r. Technical Grade Used as a pH ad luster m hinnuit tt ii.- n>>~-f n and cellophane waterproofing, as a raw materi.il for pi in ,nd alkyd resir.s; as an intermediate for lactic anil esters md sain SHIPPING INFORMATION : Lactic And \(l`. . rn i r u urn n 500-lb. (net) drums 88% concenlrstiim m '.j'.-lb m-t irun.i MONOAMMONIUM PHOSPHATE See Ptge 29 MONOSODIUM PHOSPHATE See Pages 8 end 31 PHOSPHORIC ACID 75. 80end85\ See Pege 30 FLAVORINGS CAFFEINE ANHYDROUS U.S.P. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 870.98 STANDARD FORM: Crystalline Powder. SPECIFICATIONS: White powder; no foreign odor. M P 23b o min.; moisture 0.25% max. GRADES: Anhydrous powder or hydrated powiler USES: Used in soft drinks for its distinctive taste anil as a nulil stimulant Used in pharmsceutical preparations for in>rense<t wakefulness, to stimulate mental activity and for dmret ir ;n uvit y Prevalent along or in combination with aspnn and .i< t-<,.| I,n.-t 1.1,n SHIPPING INFORMATION: Chemicals NOIBN loo-lh fiber ETHAVAN ETHYLVANILLIN ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 166.17 STANDARD FORM: Fine crystalline needles SPECIFICATIONS: NF. Fine white crystalline needle*, completely soluble in ethyl alcohol 95% (1:2); ash 0 03% max . M P Vli VC GENERAL INFORMATION: Flhavan i a flavoring and nmmniic It baa a flavor similar to. but not identical to vanillin I ht- relative flavoring strength ia approximately three times that of vanillin USES: Chocolate syrups, chocolate coatings, cookie fillings, mgs. bakery products, etc. SHIPPING INFORMATION: Chemicals NOIBN. loo.It, drums. 25-lb. fiber drums. METHYL SALICYLATE U.S.P. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: U.S.P., Colorless liquid; assay ox '1 mm. Color APHA 10 max.; Odor-characteristic. Kefr.i, live Iri,i,- at 20C.--1.5350-1.5380; Specific Gravity at J5C 1 I*') 1 185. Solubility in 70% alcohol (1:7) complete; Turbidity, non. S.,|,ihd,i y in normal Potassium Hydroxide (1T0); Heavy met.ilx 3n ppm max.; Weight per gallon, 9.9 Ibe.; meets all requirements ,[ l ' ' I' USES: As a synthetic oil of wintergreen. Monsanto .Methvl Sali cylate U.SP can be used whenever the "wmiergreeri .r mm flavor or aroma is wanted. As s flavor in soft drinks. > n-am *'H< lozenges, hard candy and in the fondants of sandwich nmn md chewing gum. In pharmaceuticals as a masking agent for disagree able tasting drugs and aa a pleasant flavor in iiiouihw.uMi-* .ugh syrups and dentifrices. It has sdditional use* m m*r< i .< idea ns SHIPPING INFORMATION: 500-lb drum* ret urn.il.1.' '*i md 50-lb drums-nonreturnsble. Methyl Salicylate Lwim.il 'hi NOIBN). 0664936 TOWOLDMONOQ43021 VANILLIN MONSANTO' Vtni'lin U.S.P.; oho known ts mtthylprotocitochuic t/dhyde tnd 3-m(bory-4hydto*ybtnitldl\ydt. ORGANIC DIVISION --LITERATURE AVAILABLE MOLECULAR WEICHT: 152 14 STANDARD FORM: Fine crystal*. SPECIFICATIONS: U.S.P., fine, white crystalline needle*; M P HI .6eC.-83.0C.; no foreign flavor (in sugar solution); moisture 0.08% mu.; solubility in alcohol (1 2) complete. USES; As a vanilla "base" in Aavor extracts, baked goods, confec tions, soft drink flavor* and ic* cream. As an odorant in paper acid SHIPPING INFORMATION: Chemicals NOIBN. 100-lb. drums; 25-lb. fiber drum*. LEAVENING AGENTS DICALCIUM PHOSPHATE, ANHYDROUS AND DIHYDRATE Stt Ptgt 30 H. T. MONOCALCIUM PHOSPHATE Monohydrtto. INORGANIC OIV1SION FORMULA: Ca(H.PO.)-HiO MOLECULAR WEIGHT: 252.07 STANDARD FORM: Powder to granular. PROPERTIES; A free-flowing bead form of MCP; soluble in water, giving an acid reaction. GRADES: Differ in narticle size only. Regular for phoephated and elf-ruing flour and baking powder. Granular for baking powder. Fine for bread improvers and yeast food. Ail grade* meet Food Chemicals Codex requirements. Special grades will be supplied od USES; Leavening agent in biecuits and cracker* and acid leavening agent in pancakes; sole acid agent or mixed with sodium aluminum sulfate or sodium acid pyrophosphate in baking powder*; in making elf-rising, phoqphated plain flour and prepared flour*; to control pH of solution in malt. Used as ingredient in manufacture of glass. SHIPPING INFORMATION: Phosphate of Calcium. 100-lb, bags; 350-lb. drums. LEVN-LITE* Sodium Aluminum Photpht INORGANIC DIVISION-LITERATURE AVAILABLE USES: As a leavening in cake mixes; characterised by its delayed leavening properties; meets Food Chemical* Codei requirement*. SHIPPING INFORMATION: Sodium Aluminum Phosphate. Packaged in 100-lb. fiber drums. PAN-O-LITE Sodium Aluminum Photphttt INORGANIC DIVISION-LITERATURE AVAILABLE USES: As a leavening agent in paDcaka mixes and cake mixes: characterized by ite delayed leavening properties. Meets Food Chemicals Codex requirements. SHIPPING INFORMATION: Sodium Aluminum Pbosphste. Packaged in 10O-lb. fiber drums. PY-RAN ANHYDROUS MONOCALCIUM PHOSPHATE INORGANIC DIVISION FORMULA-. CaHvPiO.or CeH,(PO.)i MOLECULAR WEIGHT: 234.06 PROPERTIES: An anhydrous monocaicium phosphate used a* an acid component for leavening agents in self-rising flours and corn meal, alao baking powder* and prepared mixes. Has delayed leaven ing propertlea. Meets Food Chemicals Codex requirements. SHIPPING INFORMATION: Phoephate of Calcium. 100-lb. bag*. SODIUM ACID PYROPHOSPHATE INORGANIC DIVISION FORMULA: NatH>PiO> MOLECULAR WEIGHT: 221.94 STANDARD FORM: Powder. PROPERTIES: White powder, soluble in water; min. neutralixing value 74; pH of 1% solution 4 2. GRAPES: Food and Industrial. Food Grade meets Food Cb. Code* requirements. USES; As baking a.-id for prepated flours, refrigerated ,1 doughnut flours; in manufacture of baking powders and creams; in oil well drilling muds. king SHIPPING INFORMATION: Sodium Phoapbate 100-11. 325 and 100-lb. drums. STABIL-9 LEAVENING AGENT INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: Sodium Aluminum Phosphate blended with calcii phosphates. USES: A leavening in aelf-riaing flout Chemicals Code* requirements. SHIPPING INFORMATION: Sodiur Packaged in 100-lb. bags. ind miiea. Meets Food Aluminum Phosphate. IMON'NUTRITIVE SWEETENERS SACCHARIN, CALCIUM, N.F., F.C.C. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 444.50 STANDARD FORM: Powder. SPECIFICATIONS: N.F., white crystalline powder, 15.0 max. loaa od drying (4 hr./120-l25C.), 95.0-100.5% amay (on dry baaia). USES: Used a* a non-nutritive sweetner for all low-calorie foods and beverages and for pharmaceuticals, toothpaste, mouthwashm and tobacco products. SHIPPING INFORMATION: Chemical* NOIBN. 100-lb. drum*. SACCHARIN, SODIUM, N.F., F.C.C. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 205.19 STANDARD FORMS: Powder and granular. SPECIFICATIONS: N.F.. 1.8 solubility in water. Powder Wb.te powder. 5.8% max. moisture, 2.5% max. retained on 80 mesh. Granular: 14.8% max loaa on drying at 125. USES: Used as a non-nutritive sweetener for all low-calorie food* and beverages and for pharmaceuticals, toothpaste, mouthwashes and tobacco products. SHIPPING INFORMATION: Chemicals NOIBN, 100-lb. drums. SACCHARIN, U.S.P. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 183.18 STANDARD FORM: White powder. SPECIFICATIONS: U.S.P.. White powder. 05% max moisture. 227.0#C- or higher melting point, 98.0% min. purity, 0.4% max. retained on 80 meeb. USES: Used as a non-nutritive sweetener for all low-calorie foods and beverage*, and for toothpastes, mouthwashes and pharma ceutical preparations and tobaooc product*. SHIPPING INFORMATION: Chemical* NOIBN, 100-lb. drum*. PRESERVATIVES BENZOIC ACID, U.S.P., F.C.C. ORGANIC DIVISION--LITERATURE AVAILABLE MOLECULAR WEIGHT: 122.12 STANDARD FORM: Fine powder, or crystalline flakes. SPECIFICATIONS: U.S.P.. White crystalline needles or fine powder; sassy 99.5% min.; solution in alcohol (1:2.5) and in 10% sodium carbonate (1:6) clear and colorless; meet* U.S.P. teat for cerboiutable impurities; 2% max. powder retained on 60 mh USES: Used in medicinal preparations and a* a preservative in foodstuffs. SHIPPING INFORMATION: Food Preserving Compound NOIBN 100-lb. fiber drums. 0664939 TOWOLDMONOQ43022 SODIUM BENZOATE, U.S.P., F.C.C. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 144.11 STANDARD FORM: Powder or flake*. . .SPECIFICATIONS: US.P., Thin white flakes or white powder; solubility in water (10:100 at 25C) complete; solubility in 90% ethyl alcohol (1:50 at 25C.) complete, moisture 0.50% mu.; assay 99.0% min. USES: For preserving foods, tobacco and medicinal preparation*. SHIPPING INFORMATION: Sodium Benzoate. 100-lb. fiber SODIUM BISULFITE ANHYDROUS See Ptgt 22 BUFFERING AGENTS/COAGULANTS/DISPERSING AGENTS/EMULSIFIERS/PROTEIN INTERACTANTS/ SEQUESTRANTS/NUTRITION SUPPLEMENTS ADIPIC ACID, FOOD AND TECHNICAL GRADES See P*gt 17 BENZOIC ACID, U.S.P. AND TECHNICAL See Ptgt 18 DICALCIUM PHOSPHATE, ANHYDROUS AND DIHYDRATE See Ptgt 30 DISODIUM PHOSPHATE, DUOHYDRATE See Ptgt 31 FUMARIC ACID, FOOD AND TECHNICAL GRADES See Ptgt 17 H. T. MONOCALCIUM PHOSPHATE Monohydrttt See Ptgt 18 MONOSODIUM PHOSPHATE See Ptgts 8 end 31 PHOSPHORIC ACID 75.80.ndas% See Ptgt 30 SODIUM ACID PYROPHOSPHATE See Ptgt 18 SODIUM HEXAMETAPHOSPHATE See Ptgt 31 SODIUM TRIPOLYPHOSPHATE See Ptgt 31 TETRASODIUM PYROPHOSPHATE See Ptgt 32 TRICALCIUM PHOSPHATE See Ptgt 30 TRISODIUM PHOSPHATE, CRYSTALLINE See Ptgt 32 FUNCTIONAL FLUIDS: AIRBORNE, INDUSTRIAL, SPECIALTY AIRBORNE AND SPECIALTY COOLANOL 45 DIELECTRIC COOLANT FOR ELECTRONIC EQUIPMENT See Ptgt 14 OS-45 TYPE IV HIGH TEMPERATURE HYDRAULIC FLUID FOR AIRCRAFT See Ptgt 15 SKYDROL 500-A FIRE RESISTANT HYDRAULIC FLUID FOR JET AIRCRAFT ORGANIC DIVISION --LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Moisture 20% mai neutralization mini ber 0.10 max.; p. gr. 25/25C. 1.060-1.066. viacoaity at HHlF 11.7 0.4 cs. PROPERTIES: A clear, purple, Are-reeisLant hydraulic fluid with excelleDt lubricity. Operational at -65F. USES: Hydraulic fluid for hydraulic ayalema in turbo jet and turbo prop aircraft, which must be operational at -65"K SHIPPING INFORMATION: Hydraulic system fluids other than petroleum. 1-qt. cans; 1-gal. cans; 5-gal. cans, 54-gal drums SKYDROL 500-B FIRE RESISTANT HYDRAULIC FLUID FOR JET AIRCRAFT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A clear, purple-colored fluid with ezcellent lubricity Operational over a temperature range of -- t>5F. to a 225:K USES: Hydraulic fluid for ayatema in turbo |et and turbo prop aircraft, or other ayatema requiring or deeirmg a tire resistant hydraulic fluid operational over the range of -t>5K to - '.'K SHIPPING INFORMATION: Hydraulic fluid* other than petroleuro. l-qt, can*; 1-gal. cane; 5-gal. cane; 54-gal. drum*. SKYDROL 7000 FIRE RESISTANT HYDRAULIC FLUID FOR AIRCRAFT ORGANIC DIVISION-LITERATURE AVAILABLE TYPICAL ANALYSIS: Cloud point below 0K ; moisture n max.; neutralization number 0.2 max.; *p. gr. 1 UHO to 1 out; at 25/25C.; pour point -70F. or lower. PROPERTIES: A clear, green fire-resistant hydraulic thud *uh outstanding lubricity, stability, non-corrosiveneaa. .. 11nt viacoaity-temperature characteristic*, and resistance to mul.iinm USES: Hydraulic fluid in aircraft cabin superchargers. eipnnaiou turbine* for air-conditioning ayatema and the aircrait byUr.iui,, SHIPPING INFORMATION: Hydraulic ayatem fluids other than petroleum. 1-qt. cans, 1-gal. cans; 5-gal. cans, >4 gai .iruhim 0664940 19 TOWOLDMONOQ43023 INDUSTRIAL PYDRAUL 135 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viscosity at 100F--141 SSU. 210F.-- 41 SSU. moisture 0 10% max., neutralization numlxr (acid) -- 0 40 max., sp gr. at 2.r 25eC.- 1.186-1 11)7. PROPERTIES: A blue-green liquid, synthetic baae. fire-reactant hydraulic fluid with excellent lubricity and pumping cbaracteriatica for uae at operating temperatures down to about 20*F.; nonrorroaive. extremely stable to both beat and air; 135 ia shear stable, and undergoes no appreciable change in viscosity after years of USES: lyow-viacoaity fluid for uae in outdoor hydraulic*, injection molding, die casting, Askama-type regulators, fork lift truck* and other mobile equipment, steam and gaa turbine controls, steel mill hydraulic*, including handling equipment, roll mill coders, etc. SHIPPING INFORMATION: Hydraulic system fluids other than petroleum. Tank cars, tank trucks. 55-gal. ateel drums and 5-gal, PYDRAUL 230 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPtCAL ANALYSIS: Viscosity at 1006F.- 230 SSU. 210F--44 SSU; moiature 0.10% max.; neutralization number (acid)--0.30 max.; ap. gr. at 25V25C.-1.150 to 1.180. PROPERTIES: A blue-green liquid, synthetic-base, fire-resistant hydraulic fluid with excellent lubricity and pumping characteristics; non-corrosive, extremely stable to both heat and air; recoverable and reclaimable by filtration; ia ahear stable and undergoes no appreciable change in physical characteristics and properties after year* of service. USES: A high performance, low cost, medium viscosity, fire-resistant fluid for die-CMting machines, hydraulic presses, automatic welding machines and similar applications requiring a medium viscosity aafety fluid. SHIPPING INFORMATION: Hydraulic system fluids other than lietroleum. Tank cars, tank trucks, 55-gal. ateel drums and 5-gal. PYDRAUL 312 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viscosity at 100F--312 SSU, 210F-- 50 SSU; moisture--0.10% max.; neutralization number (acid) 0.30 max.; sp. gr. at 25V25C.--1.080-1.140. PROPERTIES; A blue-green liquid, synthetic base, fire-resistant hydraulic fluid with excellent lubricity and pumping characteristics; non-corrosive, extremely stable to both heat and air; recoverable by filtration. 912 is shear stable and undergoes no appreciable change in viscosity after years of service. USES: A high performance, low cost fire-resistant fluid for die casting machines, hydraulic presses, automatic welding machines, injection molding equipment and similar applications requiring a medium viscosity fluid. SHIPPING INFORMATION: Hydraulic system fluids other than petroleum. Tank cars, tank trucks, 55-gsl. steel drums and 5-gal. PYDRAUL 540 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALY9IS: Viacosity at 100*F.--535 SSU. 210aF.-- 54 SSU; moiature -0.08% (max,) neutralization number 0.40 (max.); sp gr. at 25a/25aC.--1.160 to 1.200. PROPERTIES: A blue-green liquid, aynthetir-baae: fire-resistant hydraulic fluid of high viscosity and excellent lubricity and pump ing characteristics. USES: A fire-resistant hydraulic fluid designed for equipment re quiring a high viscosity fluid, auch as large forging presses and extrusion presses. SHIPPING INFORMATION: Hydraulic system fluids other than petroleum. Tank cara, lank trucks, 55-gal. ateel druma and 5-gai. PYDRAUL A-200 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viacosity at IOOaF.~230 SSU. 210aF --41.9 SSU. moiature--0.05% max.; neutralization number (acid)-- 0.80-1.10 max.; sp. gr. at 25V25C.--1.415-1.430. 20 PROPERTIES: A cloudy blue liquid, straight syriihem-. lire resistant hydraulic fluid with excellent lubricity, mm i.irrmivi' extremely stable to both heat and air, is designed to I* (M-rmanvm . fluid spilled and leaked can be easily reclaimed hy tilir.itmn does not thicken with use: resists "breakdown" even under extreme conditions; passes ASTM-D-665-A rust test with perfect i, ,,rA-200 is shear stable and undergoes no loss of viscosity after year* of severe use. USES: Fire resistant hydraulic fluid in die-caating in.u lime* hydraulic presses, automatic welding machines and smuhtr ,ppucations requiring a medium viscosity fluid. SHIPPING INFORMATION: Hydraulic system fluids tuber th in petroleum. 55-gal steel drums. 5-gal. cana. tank car*, tank truck* PYDRAUL 60 HYDRAULIC FLUID ORGANIC DIVISION- LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viscosity at U)0F fin SSU JI o 1 )' 34 SSU; moisture 0.10% max., neutralization number a. 0.25 max.: sp. gr at 25 25(.\ --l.OMfl-l 091. PROPERTIES: A cloudy blue liquid, straight *yniht-nc tire resistant hydraulic fluid with excellent lubricating and [>urm| ig characteristics; non-corrosive. USES: A fire resistant hydraulic fluid in system* requiring oil reme] v low viscosity. SHIPPING INFORMATION: Hydraulic system fluid* other than petroleum. 55-gal. steel drums and 5-gal cans, tank car*, i.mk PYDRAUL 150 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viscosity at 100F --150 SSU. JUI-F 50 SSU; moiature--0.15% max.; neutralization numlwr (and' 0.17 max.; sp. gr. at 26/25*C.~1.119-1.135. PROPERTIES: A cloudy blue liquid, straight synthetic tire resistant hydraulic fluid of low viscosity with excellent lubricity and low temperature pumping characteristics; noD-corrosive. USES: Fire resistant hydraulic fluid in equipment which operates out of doors st low temperatures part ot ell of the time, such as Aakama Regulator Equipment, fork-lift trucks and similar equip ment with cold weather fluid requirements. SHIPPING INFORMATION: Hydraulic system fluids other than petroleum. 55-gsl. ateel drums: 5-gal. cans, tank cars, tank trucks. PYDRAUL 280 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viacosity at 100F--270 SSU. 2I0'F hi SSU; moiature--0.15% max.; neutralization number (and) u 2 o 5 sp. gr. at 25/25#C. --1.385 to 1.405. PROPERTIES: A cloudy blue liquid, straight synthetic tire reaiatant fluid with excellent lubricity and pumping charactrri.mc*, non-corrosive, extremely stable to both heat and air. shear stable, recoverable and reclaimable by filtration; designed for long service life in the medium viscosity range. USES: Fire-resistant hydraulic fluid in die-rasting machine*, hy draulic presaes, automatic welding machines and similar apple a tiona requiring a medium viscosity fluid. SHIPPING INFORMATION: Hydraulic system fluid* oilier than petroleum. Tank cars, tank trucks, 55-gal. steel drums and 5.gal. PYDRAUL 625 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viacoaity at 100F - 625 SSU 21<v'F 45 SSU; moiature--0.15% max.; neutralization numlier 'amii 0.30 max.; sp. gr. at 25,25aC. --1.340-1.370. PROPERTIES: A cloudy blue liquid, straight synthetic (ire reaiatant hydraulic fluid of high viacoaity with excellent lubricity and pumping characteristics; non-corrosive. USES: A fire resistant hydraulic fluid in equipment requiring a high viacoaity medium, such as large forging presses, exirunion presses and some die-casting machines. SHIPPING INFORMATION: Hydraulic system fluid* other than petroleum. 55-gal. steel druma; 5-gal. cana, tank cars, tank ini-, k* PYDRAUL F-9 HYDRAULIC FLUID ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viscosity at 100aF.-245 SSU. 2inK 45 SSU; moiature--0.20% max; neutralization number '.nul 0.30 max.; ap. gr. at 25a/25aC.--1 270-1.300. PROPERTIES: A cloudy blue liquid; straight synthriu 'inresistant fluid with excellent lubricity and pumping i-hur n termne * non-corrosive, extremely stable to both heat and ait. tk> ovi-t Aide by filtration; designed for long service life. 0684941 TOWOLDMONOQ43024 CSFR: Fire resistant hydraulic fluid in die-caating machine*, hydraulic presses. automatic welding machine* and similar applica tion* requiring a medium viscosity fluid. SHIPPING INFORMATION: Hydraulic system fluids other than petroleum. 55-gal. steel drums and 5-gal. cans, lank cai'B, tank PYDRAUL AC COMPRESSOR LUBRICANT ORGANIC DIVISION-LITERATURE AVAILABLE .STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viacoaity at 100F.~405 SSU, 210F--42 SSU; moiature 0 15% mat.; neutralization number (acid)-- 0.15 max; *p. gr at 25 25C 1.340-1.360. PROPERTIES: A clear blue, mobile straight synthetic fire reeiatant air compressor lubricant with excellent lubricity: non-corrosive. USES: A fire and eiploeion resistant lubricant for air compressor*, such ss those used in air separation plants, plant air ayalema. ammonia synthesis plants, gaa transmission booster stations and other type processing planta. SHIPPING INFORMATION: Chemicals NOIBN. 55-gal. steel drums, 5-gal. cans, tank cars, tank trucks. PYDRAUL AC WINTER GRADE 28 -- COMPRESSOR LUBRICANT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Viacoeity at 100F.~ 28 ca.; 210F.- 3 8 c*.; moiature -0.15% max.; neutraliiation number (acid)---0.15 max.; ap. gr. at 25/25C.--1.275- 1.295. PROPERTIES: A clear blue, mobile straight synthetic fire-resistant air compressor lubricant with excellent lubricity; non-corrosive. USES: Similar to Pydraul AC with lower viacoeity. Can be used st ambient temperature down to about 20F. SHIPPING INFORMATION: Chemical* NOIBN 55-gal. ateel drums; 5-gal. can*, lank cars, tank trucks. THERMINOL FR --HEAT TRANSFER LIQUIDS ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: Clear, colorless liquids with boiling points above their maximum recommended use temperatures. They are thermally and oxidatively stable to these maximum recommended use tem peratures and extremely fire resistant. Underwriters' Laboratories. Incorporated, listed. USES: Therminoi Fit Liquid* are fire-resistant beat transfer media produced to rigid specification* important to heet transfer. There are five Therminoi FR product*: Thermtnol FR-Lo Temp, Therminoi Kit-0, Therminoi FR-1, Therminoi FR-2, and Therminoi FR-3. They differ in their low temperature pumpability and in their maximum recommended bulk fluid temperature. These tempera tures range between -40F. and 600F. SHIPPING INFORMATION: Chemical* NOIBN, tank can, tank trucks, 55-gal. steel drum* and 5-gal. cane. THERMINOU 66 and THERMINOL 77 -- HEAT TRANSFER LIQUIDS ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: Clear, yellowish liquid* with high boiling point* above their maximum recommended bulk fluid temperatures, thermally liable to their maximum recommended bulk fluid temperatures. Not fire resistant. USES: Therminoi 66 and Therminoi 77 are beat transfer media produced to rigid specification* important to heat transfer where hulk fluid operating temperature* in excess of 600F. are required. Thrrminoi 66 has a wide range capability between 15F. and 650F. and exhibit* the greatest overall efficiency in heat transfer. Therminoi 77 exhibits the highest temperature capability to 700P. and above with minimum pumpability at 65F. SHIPPING INFORMATION: Chemical* NOIBN. tank cars, tank trucks, 55-gal. steel drums and 5-gal. can*. SANTOWAX OMP ORGANIC COOLANT FOR NUCLEAR REACTORS ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Solid. PROPERTIES: A high boiling thermal and radiation resistant heat transfer medium. USES: Organic nuclear reactor coolant and high temperature industrial heal transfer medium. SHIPPING INFORMATION: Chemicals NOIBN. tank cam. tank truck*, 55-gal. ateel drums and 5-gal. cans. HEAVY CHEMICALS ALUMINUM CHLORIDE SOLUTION 32 Be. INORGANIC DIVISION MOLECULAR WEIGHT: 266.7 STANDARD FORM: Liquid. TYPICAL ANALYSIS: Neutral salt, low in iron content. . .lotions have an acid reaction but contain no free acid AlCb-tiHiO, Ml J% AliOt, 10.6% ; Ke, 0.005% . USES: Carbonizing fine wool such as piece good*, raw stock or shoddy, resulting in an exceptionally white, lofty wool, rurhoniring colored goods where it has very little stripping action, soap iimiufacture lor treatment of glycerine lyea where chloride of alumina us more desirable than aulfate. SHIPPING INFORMATION: Aluminum Chloride Liquid Tank cars; tank truck*. ALUMINUM SULFATE 5s* Pege 68 BATTERY ACID INORGANIC DIVISION STANDARD FORM: Liquid TYPICAL ANALYSIS: Practically colorlea* liquid, H.SO. m 2% min.; iron 0.005% max.; nitrogen compound* (as HNUu iH>01 max.; ap. gr.--1.835. USES: Electrolyta is sulfuric acid, especially adapted to the needs of the storage battery trade. SHIPPING INFORMATION: Sulfuric Acid "Corrosive1' label re quired. Tank trucks and tank car*. CARBON DIOXIDE INORGANIC DIVISION FORMULA: CO. MOLECULAR WEIGHT: 44.0 PROPERTIES: Marketed in liquid form which is colorless mid odorless. USES: As inert gas atmosphere, for fire eitinguiaherm. in carbonated beverages, and for carbon dioxide blasting. SHIPPING INFORMATION: Carbon Dioxide. Steel cylinders and CAUSTIC POTASH INORGANIC DIVISION FORMULA: KOH MOLECULAR WEIGHT: 56.1 STANDARD FORM: 46% Solution. GRADES: Available as both technical grade and low chloride gride USES: Due to the greater solubility of the salts of Caustic Pol ish permitting bigbsr solid* contsnt in liquid formulation* Causnr Potash ha* use in formulsting liquid soaps and detergent* In me manufacture of many Organic and Inorganic Potassium salts, petroleum refining, and in detergent*. SHIPPING INFORMATION: Cauitic Potash. Liquid Mo<"> 8.000 *Dd 4,000 gal. lined rnd coiled tank cars. Tank inmn also available. MIXED ACID Nitrtting Acid INORGANIC DIVISION STANDARD FORM: Liquid. TYPICAL ANALYSIS: Nitric Acid (HNO.) Sulfuric Acid (H0<) Oxidee of Nitrogen (NiOi) 80-15 80.0 % 15.0 % 0.25% USES: Nitrating in the chemical industry, parti' manufacture of explosive* and dyeetuff*. Special m furnished to meet individual requirements. SHIPPING INFORMATION: Nitrating Acid C< (white label required). 110-gal. drum*; 75 and 50 ton MURIATIC ACID Hyd'och/onc Acid* INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: HC1 MOLECULAR WEIGHT: 36.47 0684942 1'1 TOWOLDMONOQ43025 STANDARD FORM: Liquid. TYPICAL ANALYSIS: 16 He.. 27 9% HOI; 20 He.. 31 5% HCl; 22 He.. 35 2% HCl. USES: Used extensively in the March, glucoee. gelatin, steel galvanizing, paper, leather and glass industries. [HYDROCHLORIC ACID PLANTS. Complete plants offered by Engi neering Sales Department to electrolyte by product HCl and produce pure cn/orme end hydrogen. NITRIC ACID INORGANIC DIVISION- LITERATURE AVAILABLE FORMULA: HNO> MOLECULAR WEIGHT: 63 01 STANDARD FORM: 36 Be.. 38 Be.. 40 Be., and 42 Be. TYPICAL ANALYSIS: % HNO.; 36 Be.. 52.3% ; 38 Be., 56.5% 40* Be.. 61.4% : 42* He., 67 2% ; strong arid 95-98% . p. gr. will not vary more than .0.6' leruia of Be.; HjSO., 0 05% max. USES: Manufacture of insecticide*, dyestuff*, drugs, pharma ceuticals. explosives, photoengraving, nitrates and nitro products. SHIPPING INFORMATION: Nitric Acid. Corrosive liquid (white label required). Tank trucks; 50-ton tank cars. SLAG, CALCIUM SILICATE INORGANIC DIVISION STANDARD FORM: Granular solid' PROPERTIES: CaO, 47.18% . SiOi, 40 44% ; AliOi. 7.62% ; Fe-Oi, 0.20% . F. 2.62% ; P. 0.55% ; KiO. 0.97% , NatO, 0.44% MgO, 0.02% ; Mn, 0.12% . SO., 0.59% ; C, 0.10% . USES: Constituent of glass mix. SHIPPING INFORMATION: Slag. Bulk. SODIUM BISULFITE ANHYDROUS Alio known as Sodium Metabisulfite. ORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: NatSiOt MOLECULAR WEIGHT: 190 11 STANDARD FORM: Faint yellow, free-flowing crystals, TYPICAL ANALYSIS: SOi-66.6% ; NASO.-0.7% ; NaOi-1.25%. GRADES: Meets Food Chemicals Codex and U.S.P. requirements for Sodium Bisulfite USP. USES: In dye manufacture; as source fo SO. for reducing sodium bichromate to baaic chrome sulfate in tanning; bleaching of vege table tan extracts; production of hydrosulfite for vat dyeing; antichlor in bleaching ground wood, etc. SHIPPING INFORMATION: Sodium Biaulfite--dry. SODIUM BISULFATE NITRE CAKE INORGANIC DIVISION FORMULA: NsHSO. MOLECULAR WEIGHT: 120.07 STANDARD FORM: Globular. TYPICAL ANALYSIS: 38% available H.SO,. USES: Used in viscose rayon spinning bsths, dyeing woolen goods; refining nickel ores; manufacture of sulfate pulp: in tanneries for pickling, deliming and making one-bsth tan solutions: as an acid scour for household use; as a bowl cleaner in sanitary trade. SHIPPING INFORMATION: Nitre Cake. 100-lb. bags and 400-lb. SODIUM CHLORIDE (Rock Salt) INORGANIC DIVISION-CONTACT PRODUCT PLANNING DEPT. FORMULA: NACI STANDARD FORM: Mine Run or Screen Grades. CHEMICAL PURITY: 98.5 to 99.1% NACI depending upon grade. SHIPPING INFORMATION: Normal shipment--Barge loads: 1400 tons each. Rail shipment at various transfer points. PRODUCING POINT: Cote Blanch Island. La. 131 mile* west of New Orleana on lntercoastai Waterway. SANTOSITE SODIUM SULFITE ANHYDROUS TECHNICAL ORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: NsiSOi MOLECULAR WEIGHT: 126.06 STANDARD FORM: Powder. TYPICAL ANALYSIS: Tan to slightly pink crystalline powder: aaaey (NaSO>) 97.7% min.; color of filtrate from 10% solution in water not darker than APHA 70. 22 PROPERTIES: Will xidize to sodium sulfate if n Normally contains lee than 1% sodium chloride. !e- oluhle; lees than 0 2% organic balance of impurity is xtium sulfate The unfiltered has a brown color due to suspended Fc (OIL) Norm, product will pass through a No. 20 LL S. Standard si USES: Aa a reducing agent in oxygen removal fror water; depressant in ore flotation; manufacture of rubl age. SHIPPING INFORMATION: Sodium Sulfite. !00-lb. paper h,,g, and hopper cars. SULFUR DIOXIDE, LIQUID INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: SOi MOLECULAR WEIGHT: 64.07 STANDARD FORM: Liquid. SPECIFICATIONS: Colorlesa; non-volatile residue 0 0025' ) max moisture 0.005% max. USES: In leather tanning, oil refining, refrigeration, nr condi tioning, sugar refineries; antichlor in textiles, hydrosullitc m textiles; diluent in manufacture of sulfuric acids; manufaci ure if sulfuryl chloride; fruit preservation; wine making, manufacture of gelatin and corn products. SHIPPING INFORMATION: Sulfur Dioxide. Tank cars and l ien SULFURIC ACID AND OLEUM INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: H0. MOLECULAR WEIGHT: 98.08 STANDARD FORM: 60* Be.; 66* Be.; 98% H0.; All strengths oleum. SULFURIC ACID PLANTS. Complete menulecturing plants using me contact process end Monsanto^ vanadium catalyst o/lered by Engi neering Seles Department. USES: Used extensively in steel mills, enameling works, ml refin eries. pigment worke. by-product gas plants, fertilizer plsnts. tsnneriee and many other industries. SHIPPING INFORMATION: Sulfuric Acid. Tank trucks: tank NUCLEAR SOURCES Radioactive Sources Alpha from Am. Po, Pu Beta from available isotopes Gamma from available isotopes Calibration from available isotopee Bremstrahlung from available isotopes All type* {a, n) neutron sources Threshold Detectors from Pu, Np, U Radiosotope Heat Sources Special Projects and Development For information, please write or call: MONSANTO RESEARCH CORPORATION Station B. Box 8 Dayton, Ohio 45407 Phone: (513) 268-5481, 268-6769 ORGANIC CHEMICALS ACIDS AND ANHYDRIDES (CARBOXYLIC) ADIPIC ACID, FOOD AND TECHNICAL GRADES See Page 17 0684943 TOWOLDMONOQ43026 BENZOIC ACID, U.S.P. AND TECHNICAL See Page 18 FUMARIC ACID, FOOD AND TECHNICAL GRADES Set Ptge 17 MALEIC ANHYDRIDE ORGANIC DIVISION MOI.KCUt.AK WEIGHT: 98 06 HTANt>AKl> COHM: Briquettes, fused mass. SPECIFICATIONS: While briquettes or fused mass, crystallizing clear and colorless, assay 99.5" min.; color of melt 20 Al'HA max. Meal test color (2 hrs. (u. 140C.) 40 Al'HA max. USES: Used alone or in combination with other acids in the manu facture of alkyd and polyester resins; a versatile intermediate for chemical synthesis. SHIPPING INFORMATION: Maleic Anhydrides 50-lb. bags; 250-lb. fiber drums; tank cars, tank trucks. MODAFLOW RESIN MODIFIER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Very viscous clear liquid free of aolids. GKNF.RAI. INFORMATION: Soluble in toluene, kerosene, petro leum ether, carbon tetrachloride, ethyl acetate, higher alcohols. Insoluble in water, ethanol and methanol. USF.S: An additive for improving flow, leveling and adhesion properties of surface coaling formulations -- especially enBmela, vinyls, epoxies and polyesters. Uses at 0.1 -- 2.0% baaed on resin SHIPPING INFORMATION: Chemical* NOIBN, 55-gal. nonreturnable drums, 20-gal. drums and 5-gal. cans. PHTHALIC ANHYDRIDE See Ptge 56 SALICYLIC ACID U.S.P. ORGANIC DIVISION MOLF.CUI.AR WF.IGHT: 138.12 STANDARD FORM: Needle* or powder. SPECIFICATIONS: U.S.P. Grade: White needles or powder; assay 99.5%, min.; M.P. 158.0C. min.; conforms to U.S.P. test for carbonizable substances; ash 0.05% max.; powder 0.4% max. retained on 100 mesh. Industrial Grade: Light tan powder; M.P. 158.0C. at start. GRADES: U.S.P. and industrial. USES: Manufacture of medicinal* and dyestuffs; industrial pre servative; intermediate in many organic synthases. SHIPPING INFORMATION: Salicylic Acid. 200-lb. and 100-lb. fiber druma. Industrial Grade. 250-lb. fiber drum*. 5-SULFOSALICYLIC ACID TECHNICAL ORGANIC DIVISION --LITERATURE AVAILABLE MOLECULAR WEIGHT: 218 STANDARD FORM: Tan crystalline solid. ASSAY: 93% 5-sulfoaalicylic acid (min.), USES: Meta) ion chelator, dye intermediate, preparation of sur factants, catalysts and greaae additives. CONTAINERS: 200-lb. net polyethylene Lined fiber drums. SHIPPING CLASSIFICATION: Acid NOIBN Dry. TPSA TETRAPROPENYLSUCCINIC ANHYDRIDE (Dodtctnylsuccimc Anhydride) ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 266 STANDARD FORM: Liquid. GENERAL INFORMATION: The dodecenyl subetituent is present in a number of isomeric forms. SPECIFICATIONS: Appearance: clear light yellow, viscous liquid; Liquid color: 400 Al'HA (max.); Neutral Number; 395-432 mg. KOH/g. refractive index (a, 25C. 1.4740-1.4780. USES: Corrosion inhibitor, epoxy curing agent, intermediate. CONTAINERS: 450-lb. net 55-gal. drums: bulk. SHIPPING CLASSIFICATION: Chemicals. NOIBN. AMINES ortho-ANISIDINE ORGANIC DIVISION MOLECULAR WEIGHT: 123 15 STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, reddish brown to inih.-r ho :;,!. Crystallizing Point 5 3C min. (with low wed* Distilling King- first drop 223 (>C minimum. 95% 'l 9h> within I mu to include 224.SC. (Decompose# at 22h 0C > USES: A component of azo dyes CONTAINERS: 55-gallon, 18-gauge drums. SHIPPING CLASSIFICATION: Poisonous Liquid NOS .Dye Intermediate NOIBN). para-ANISIDINE Also known as pare-methoxy-anihne and pare ammoanisoies ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 123 15 STANDARD FORM: Cast solid or Hakes SPECIFICATIONS: Brownish crystalline mass or Mnk-s when produced, darkens on aging, crystallizing point mm . Im- tillation range: first drop 241.0C. min.. yr>% 1 CPC nun , to .mi 242.0 0.2C. Solution in MCI complete. USES: A component of various azo dyestuffs; intermediate in chemical synthesis CAUTION This product is toxic \vonl breathing its vapors. Avoid contact with the akin SHIPPING INFORMATION: Dye Intermediate NOIBN "I'mmui" label required. 475-lb. galv. steel drums, 150-lh fiber drum tertiary-BUTYLAMINE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 73.14 STANDARD FORM: Volatile liquid. ASSAY: 98% minimum. USES: Intermediate. CONTAINER: 300-lbs. net 55-gal. drums, hulk SHIPPING CLASSIFICATION: Flammable liquid NOS d hutvl.imine-Chemicala NOIBN). ortho-CHLOROANILINE Also known ts ortho-emino-chlorobeniene end 2 chlorotmmo bemme ORGANIC DIVISION MOLECULAR WEIGHT: 127 57 STANDARD FORM: Liquid. SPECIFICATIONS: Amber liquid that discolor* readily m air. assay 99.0% min.; crystallizing point -2 3'C min Distillation range: first drop 208.0C. min.. 95% (1-96 ml) 1 0"C max , to incl. 209.0C. USES: An intermediate in the production of dyestuffs and n cides- CAUTION: This product is toxic. Avoid skm cont.ut .,nd breathing its vapor. SHIPPING INFORMATION: Dye intermediate NOIBN I'ma.m ' label required. S50-lb. steel drums. para-CHLOROANILINE Also known as ptrt-tnvno-chlorobenient end 4-chlorotnnnobfiene ORGANIC DIVISION MOLECULAR WEIGHT: 127 57 STANDARD FORM: Csst solid, flakes. SPECIFICATIONS: Yellow-white solid; crystallizing p.uni r min. Assay 99% min.; Distillation range first drop 23D u i mm . 95% U-96 ml) 1 5C, max. Incl. 231.7 0.2C. USES: Dyestuff* intermediate. CAUTION This pmduit :< i.-xu Avoid skin contact and breathing its vapor SHIPPING INFORMATION: Dye Intermediate NOIBN t -m label required. 500-lb. steel druma. CYCLOHEXYLAMINE Also known as he`ah,0'nj....... ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 99.17 STANDARD FORM: Liquid. 0684944 TOWOLDMONOQ43027 SPECIFICATIONS: Clear, practically colorles* liquid; sp gr. o Hfi9-0 873 at 1S5TS5C. Distillation range first drop 132.0C. nun.; 95% (1-96 ml) 4.0C. mai ; dry point 137.0C. max. USES: Dyestuff intermediate; petroleum additive; corrosion in hibitor in boiler aystema, petroleum oils, grease*, glycol and metha nol antifreeies; organic synthesis; synthetic sweeteners. SHIPPING INFORMATION: Chemical NOIBN. 385-lb. galv. drums, hulk. 3,4>D(CHLOROANIL1NE (3,4-DCA) ORGANIC DIVISION- - LITERATURE AVAILABLE MOLECULAR WEIGHT: 162 STANDARD FORM; Cast solid. SPECIFICATIONS: Appearance, white to tan solid, darken* with age, < 'rystallinng Point, 70 5 nun-, assay 99.0% min. OSES: Intermediate in synthesis of biologically active compounds; CONTAINERS; 600-llrs.net 55 gnl. drums. SHIPPING INFORMATION: Pcnaonous solid (NOS Dye Inter mediate, NOIBN). DICYCLOHEXYLAMINE ORGANIC DIVISION- LITERATURE AVAILABLE MOLECULAR WEIGHT: 181.31 STANDARD FORM: Liquid. SPECIFICATIONS: Clear, practically cotorleae liquid; ap gr. 0.913-0.919 at 15.5/15.5C. Diatillation range; first drop 252.0C. min.; 95% (1-96 ml) 4.0C. max.; dry point 258.0C. max. USES: As a corrosion inhibitor (see Cyclohexylamine) and in pro duction of dicyclohexyl ammonium nitrate (used as a vapor-phase rust inhibitor, Shell Oil Company patent), rust-preventative oil additives, dyes and dry-cleaning soapa. SHIPPING INFORMATION: Chemical NOIBN. 410-lb. steel drums. DODECYLANILINE (Formerly A/kylaniiine C-12) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: Dark reddiah brown liquid, darkens on age; infrared analysis shows 90-95% of the alkyl substitution is in the para poaition; the dodecyl substituent ia preaent in a number of isomeric forma. USES: Corrosion inhibitor, intermediate for synthesis of hydro carbon soluble chemicals. CONTAINERS: 375-lb*, net- 55-gal. drums--bulk. SHIPPING INFORMATION; Chemicals NOIBN. ortho-NITROANILINE Also known as ottho-eminomUo-beniene ORGANIC DIVISION MOLECULAR WEIGHT: 138.12 STANDARD FORM: Flakea. SPECIFICATIONS: Orange Hakes; crystallizing point 69.7C. min. PROPERTIES: Tends to form lump* on standing. Milling to desired fineness just before use is recommended. Addition of 0.5% tticalcium phoephate reduces the caking tendency. USES: Manufacture of lakes and toner* (dyes) such as ONA Black, ONA Oranjje and Hanna Yellow 5G: synthesis of coccidiostats. photographic anti-fogging agents and benzotriazolee (a rust in hibitor patented by Proctor and Gamble). CAUTION: Tni# product ia toxic. Avoid skin contact and breathing its dust. SHIPPING INFORMATION; Dye Intermediate NOIBN "Poison" lal>el required. 175-lb. fiber drum*. para-NITROANILINE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 138.12 SPECIFICATIONS: Appearance, yellow to amber crystals: Ash 0 2% max,. Color of HC1 solution, NPA, No. 4 max.; Inorganic Chloride*, as Cl, 0.020% max.; Melting Point 147.9C. min. USES: Manufacture of anti-oxidants, anti-ozonanta. gasoline gum inhibitors; medical compounds for poultry, dyestuffs, color and pigments. CONTAINERS: 350-lb. fiber drumsSHIPPING INFORMATION: para-Nitroaniline (Dye Intermediate NOIBN). ortho-PHENETIDINE Also known as ortho-eminopheny/ethyl ether, ortho-aminopheneiole end 2 amino-ethoxybemene. ORGANIC DIVISION MOLEC ULAR WEIGHT: 137.18 -StJL STANDARD FORM: Liquid SPECIFICATIONS: Dark red liquid; rrystallmng point to r min. Distillation range first drop J.'il U*C min., 95 7 1 pi; nil 2.0C. max.; and to inch 232 3 0 2C USES; An intermediate in the production of dyestufTs CAI :TK>N This product is toxic. Avoid contact with skin and breathing its SHIPPING INFORMATION: Dye Intermediate NOIBN I'm son" label required. 475-lb. steel drums. para-PHENETIDINE Also known as para-ammophenylelhyl ether, pare ammopheneiola and 4- amino-ethonybeniene. ORGANIC 0IVISI0N MOLECULAR WEIGHT: 137.18 STANDARD FORM; Liquid. SPECIFICATIONS: Light yellow liquid: rrystallmng point 4 2r min.; distillation range: first drop 248 ,'IC. mm.; 95% (1-yfi mli 2.0C. max.; and to inch 250.0 l).2C. USES: An intermediate in the production of dyestuffs and pharma ceuticala. CAUTION: This product is toxic. Avoid breathing ns vapors and avoid contact with the akin. SHIPPING INFORMATION: Dye Intermediate NOIBN I'mson" label required. 480-lb. steel drums. FLAVORINGS CAFFEINE ANHYDROUS U.S.P. See Page 17 ETHAVAN Ethylvemllin See Page 17 METHYL SALICYLATE U.S.P. See Page 17 SACCHARIN (CALCIUM AND SODIUM) U.S.P. See Page 18 VANILLIN MONSANTO* Vanillin U S.P. See Page 18 HALOGEN-CONTAINING COMPOUNDS (MISC.) ACL SANITIZER AND BLEACHING COMPOUND See Page 71 AROCLOR POLYCHLORINATED POLYPHENYLS ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquids, resins or solid*. PROPERTIES: Chlorinated aromatic hydrocarbon* varying from water-white mobile liquids and pale yellow viscous oils to light amber reams and opaque crystalline solids. GENERAL INFORMATION: Aroclor liquids have excellent electries) characteristics, high dielectric strength and resistivity, tow power factor; certain of the liquids have a high dielectric constant aa compared with mineral oils. USES: Aroclor liquids are used aa dielectric* for condensers or capacitors and transformer*. They are used to impregnate carbon resistors, and when combined with other plastic materials, they are excellent sealers or impregnating agents for a variety of electrical apparatus. Aroclor compounds also find use aa liquid thermostat fluids; vacuum diffusion pump fluids; swelling agents for auto motive transmission seals: and. as additives and base stocks fur specialty lubricants, oil and greases. SHIPPING INFORMATION: Resin Synthetic NOIBN without filler. 600-lb. steel drums; 500-lb. net fiber drum*. 100-lb net bags. BENZYL CHLORIDE Also known as alpha-chto'otohiene ORGANIC 0IVISION --LITERATURE AVAILABLE MOLECULAR WEIGHT: 126.58 STANDARD FORM: Liquid. 06849A5 TOWOLDMONOQ43028 SPECIFICATIONS: Clear, colorless liquid: sp gr. 1 104-1 110 at If. r.\ l.V.VO. Boiling range at TOO mm 2'C. max. including 179.4C. USES' A highly reactive aralkyl halide used in the production of the following: dyestuffs; perfume bases such as benzyl alcohol, acetate and other eaters, plasticizer*; resins; wetting agents: ferimcidea, rubber accelerators; gasoline gum inhibitors; benzyl enroate; and pharmaceuticals. .SHIPPING INFORMATION: Chemicals NOIRN Corrosive liquid (white laliel required) 475-lb. nickel drums; 2000-gal. 2-compart ment nickel tank trucks. BENZYL CHLORIDE, Inhibited with 0 25% tntthylamine ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Same as for preceding product. CONTAINERS: 47f.-lh. lacquer-lined drums. ortho-Dl CHLOROBENZENE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 14701 STANDARD FORM: Liquid, SPECIFICATIONS: Appearat e, practically clear; Color, 30 APHA max.; Crystallizing Point, mi is 7.0C, max.; nistilling Range-- first drop 177.7C- min.-- 007 (1-01 ml.) 4.1C. max.--dry point USES: Degreasing formulations; tar, grease, paint and carbon remover*; spotting agent* in dry cleaning; metal polishes; wool and felt scouring; insecticide formulations; and treating of sewage and garbage for odor control. SHIPPING INFORMATION; ortho-Pichlorobenzol. 55-gal.. 18gsuge black iron drums, bulk. GUAIACOL ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 124.13. STANDARD FORM: Light yellow liquid. SPECIFICATIONS: Crystallizing Point 27 5C. min. USES; Chemical intermediate in the manufacture of flavors, perfumes end pharmaceuticals Also used as an "anti-skinning" agent for paints and as an inhibitor in certain petroleum specialties. SHIPPING INFORMATION: Chemicals NOIBN, 500-lb. drums. ortho-NITROCHLOROBENZENE Also known as orthochloionitrobemene. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 157.56 STANDARD FORM: Cast solid. SPECIFICATIONS: Green-yellow crystalline mass; crystallizing point 31.8C. min. (dry basis). USES: An intermediate in tbe synthesis of o-aminophenol (dye stuffs intermediate and photographic developer), dichlorobenztdine (chrome-dyestuffs intermediate), and many other organic intermedi ate chemical*: and a solvent in synthetic-petroleum processes. CAUTION: This material is toxic. Avoid breathing it* vapor*. Avoid contact with the skin. Toxicity reference: U. S. Public Health Bulletin No. 271 (1941), SHIPPING INFORMATION: Dye Intermediate NOIBN "Poison" label required. 600-lb. ateel drums; tank cars. para-NITROCH LOR OBENZENE Also known as part-chloronit/obamana. ORGANIC DIVISION --LITERATURE AVAILABLE MOLECULAR WEIGHT: 157.56 STANDARD FORM: Flake*. SPECIFICATIONS: Appearance light yellow flakes or crystalline mta; cryslaUlung point 82.5C. min. USES: In the manufectur* of diaodium-benzene-meta-diauJfonate' para-aminophenol; 2-chloro-5-nitrobentene sulfonic acid; 2.6-dichloro-4-nitro* niline; and 5-amino-2-anilina benzene aulfonic acid; pharmaceutical acetophenetidine "Diaaone" an agent for treatment of Hansen'* disease (Abbott patent;) and a variety of anti oxidant* and gum inhibitors CAUTION: This product is toxic. Avoid breathing its vapors and avoid contact with the akin. Toxicity reliance: l). S. Public Health Bulletin No. 271 (1941). SHIPPING INFORMATION: Dye Intermediate NOIBN "Poison" label required. 325-lb. fiber drums. MONSANTO PENTA Pantachlo'ophanol. Tachnicat. Sea Page 65 PHTHALYL CHLORIDE Phthaloyl Chtoudt- ORGANIC DIVISION MOLECULAR WEIGHT: 203.03 STANDARD FORM; Liquid. SPECIFICATIONS: Yellowish liquid ,i*iwy >-. U-; lizmg point 10'C. min. rvuil USES: Manufacture of plasticizers and resin*, goner.il >rgimr synthesis. SHIPPING INFORMATION: Chemicals NOIBN Corm-nve liquid (white label required). 605-lb. nickel drum*. SANTOCHLOR para-DICHLOROBENZENE Sea Page 11 SANTOPHEN 1 GERMICIDE ortho-bemyl-paiachiorophanol. See Page 65 SANTOPHEN 1 SOLUTION See Page 66 TCC 3 4, 4' Teichlotocaibanilida. See Page 66 MONOMERS ACRYLONITRILE HYDR0CAR80NS AND POLYMERS DIVISION ~ LITERATURE AVAILABLE MOLECULAR WEIGHT: 53.03 STANDARD FORM: Liquid PROPERTIES: A bi-functional hydrocarbon, it is stable under ordinary conditions, yet can be made to react with a wnl>- v.iru-iy of other materials. Wilt copolymerize with most rommernal vnivl monomers, will join chemically with a variety of natural ,,r syn thetic resin-formers. USES: Production of synthetic textile fibers, nitrile avnihruc rubber, copolymers, and chemical intermediates. INDUSTRIAL USERS: Chemical. Rubber. Textile SHIPPING INFORMATION: Tank cars, drum* (3.M) II.* truck*. Barges, Tankers. Bail & Truck. Acrylonitrile On-m,, d* NOIBN). BUTADIENE HYDROCARBONS AND POLYMERS DIVISION MOLECULAR WEIGHT: 54 0 STANDARD FORM: Liquified Gas. SPECIFICATIONS: 99% minimum; inhibited with tem.iry t uiv| PROPERTIES: Highly reactive hydrocarbon containing bonds; polymerizes and co-polymerizea readily, parti. ui u i v f oxygen la present. USES: Production of styrene-butadiene rubber*. .< rvl.-n, -,i.butadiene rubbers, and poly butadiene rubber*. [>r<lu. ,. ,| various types of latex for use in paints and a* binder ti u >n a fabric*; raw material for adiponitnle production, mar-mi.i.i ,r.tetrahydrophthaJic anhydride; production of arryluiairiic- ....... diene-styrene plastics. INDUSTRY USERS: Rubber; plastic*; surface coating* i,.--,,, ,, manufacture. SHIPPING INFORMATION: Butadiene. Pressure i.n* ICC Red gag label; MCA warning label. ETHYLBENZENE HYDROCARBONS AND POLYMERS DIVISION STANDARD FORM: Clear Liquid USES: Production of atyrene monomer, paint solvent* SHIPPING INFORMATION: Tank car*, tank In,, k. tankers. Ethylbenzene: Flammable liquid (red label, METHANOL HYDROCARBONS AND POLYMERS DIVISIONLITERATURE AVAILABLE MOLECULAR WEIGHT: 32 04 STANDARD FORM: Liquid. USES: Methanol is used for the manufacture of forma, an antifreeze; as a solvent, a denaturant; and aa a < lni,, mediate. INDUSTRIAL USERS: Chemical. Petroleum SHIPPING INFORMATION: Tank ears, tank tru. ki drum* (350-lbs.) Rail fit Truck; Methanol. Liquid 0684946 TOWOLDMONOQ43029 STYRENE MONOMER HYDROCARBONS AND POLYMERS OlVISIONLITERATURE AVAILABLE STANDARD FORM: Liquid inhibited with TBC. PROPERTIES: An Aromatic hydrocarbon with an aliphatic aide dibit. containing a double bond which permits polymerization, amolymerizal ton and other reaction* A colorless material that polymerizes mid copiilynierir.es with other light-colored materials to yield clear or light-colored products. USES: Product ion of styrene molding compounds, synthetic rubber, i oiiiilyrners, ion exchange resins, polyesters, sytrene modified oils and nlkyiis for surface coatings. IN DUSTKI At. USFlItH: Plastics, surface coatings. Chemicals, Rubber. SHIPPING INFORMATION: lank trucks, tank cars, barges, l ankers; drums. Styrene Liquid. VINYL ACETATE MONOMER HYDROCARBONS AND POLYMERS DIVISIONLIURATURE AVAILABLE MOLECULAR WEIGHT: fit! 1 STANDARD FORM: Liquid At ordinAry temperature And pres- SPKCIFTCATIONS: H<J Grade - Vinyl Acotate Monomer -1)PA is also available containing Diphenylamino Inhibitor. PROPERTIES: A reactive monomer having a double bond which permit* polymerization, eopolymerization and other reactions. USF19: Production of laticc* for the paint and surface coatings industry and copolymera for extrusion and molding compounds. INDUSTRY USERS: Paint manufacturers; chemical manufac- NHM'PING INFORMATION: Vinyl Acetate. Tank cars, tank Irucka. hargea, tankers. Apply "Dangerous" placards. VINYL CHLORIDE MONOMER HYDROCARBONS AND POLYMERS OIVISIONIITERATURE AVAILABLE MOLECULAR WEIGHT: 62.50 STANDARD FORM: Liquefied gas shipped either inhibitor free or inhibited with phenol. PROPERTIES: A reactive monomer having a double bond which permit# polymerization, copolymerization and other reactions. USES: Production of polyvinyl chloride reains, compounds, co polymers and chemical intermediates. INDUSTRIAL USERS: Chemical manufacturers. SHIPPING INFORMATION: Tank care, cylinders (200 lha.). Hail & Truck: Vinyl Chloride Monomer "Dangerous" Placards Apply. PHARMACEUTICALS PHENACETIN U.S.P. ORGANIC DIVISION MOLECULAR WEIGHT: 179.21 STANDARD FORM: Crystalline powder. SPECIFICATIONS: While crystalline powder; solubility in ethyl alcohol 95% (1:15) complete; M.P. 135.0C. min.; ash 0.05% max.: 5% max. powder retained on 100 meah. USES: Commonly used pharmaceutical product, primarily aa an Atili-pyreiic. i'reacribed alone or in combination with aspirin and caffeine. SHIPPING INFORMATION: Chemical NOIBN. 200-lb. and 100Ih. tiler drums. ASPIRIN ORGANIC DIVISION MOLECULAR WEIGHT: 180 15 STANDARD FORM: Crystalline solid. SPECIFICATIONS: White crystals; assay 99.5% min.; solubility in ethyl alcohol 95% (1:5) complete, solubility in 10% NaiCOj (1:20) complete; ash 0.05% max.; conforms to U.S.P. lest for heavy metals, carbonizahle impurities, chloride, sulfate and free salicylic acid. GRADES: 20 mesh; 40 meah; 80 meah. USES: Acelylealicylic Acid is analgesic and antipyretic. It is used for the treament of acute and chronic rheumatic states, and for headache, neuralgia and influenza. SHIPPING INFORMATION: Acetylsalicylic Acid. 250dl>. and )(M)-lb. filler druma. 26 , CAFFEINE ANHYDROUS U.S.P. See Pge 17 METHAPYRILENE FUMARATE Thenylpyram/ne Fumarate ORGANIC DIVISION MOLECULAR WEIGHT: 870 08 STANDARD FORM: Powder. SPECIFICATIONS: White crystalline powder; ash 0 IIV7 max assay 99.0% min., moisture <).;>% max . M P. lTPC mm USES: In pharmaceutical and ant dust amime preparations SHIPPING INFORMATION: Chemicals NOiliN lOOlh .ind 25-lb. filler drums, 5-lb. (iberpaks. METHAPYRILENE HYDROCHLORIDE Thenylpyremine Hydrochloride hi.N- dimethyl- N' 2 pyndyl-hl'-2-thenylethylene diamine hydrochloride ORGANIC DIVISION MOLECULAR WEIGHT: 297 8f. STANDARD FORM: Crystalline solid. SPECIFICATIONS: White or yellow-white crystals, assay 99 ' min.; aah 0.05% max.; moisture 0.1% max.; M P lfil.V'C nun to start; 1.0% max. retained on 40 mesh. GRADES: Thenylpyramine can also he supplied in the form of the fumarate sail, which is preferred in certain applications USES: In pharmaceutical preparations for aniihistamimc activity or for sleep inducing (non-prescription). SHIPPING INFORMATION: Chemicals NOIHN. 100-lb and 25-lb. fiber drums; 5-lb. fiberpaks. PHENOLPHTHALEIN U.S.P. ORGANIC DIVISION MOLECULAR WEIGHT: 318.31 STANDARD FORM: Crystals. SPECIFICATIONS: White crystals; M.P. 259 0C. min ; solubil ity in alcohol (1:15) complete; acidity (ml N 1000 NaOH 2 gm sample) 3.0 ml max.; aah 0.1% max ; arsenic 0 001% nun . cun forms to U.S.P. teat for fluorine snd heavy metals; trace mux. retained on 100 meah. USES: Pharmaceutical preparations as a gentle irritant purgative. SHIPPING INFORMATION: Chemicals NOIBN. 250-lb and 100-lb. fiber drums. PHENOLPHTHALEIN, YELLOW ORGANIC DIVISION SPECIFICATIONS: Fine yellow powder; loas on drying (3 hra 110eC.) 0.50% max.; aah 0.10% max. U9ES: Pharmaceutical preparations aa gentle irritant purgative. PHENOLS BISPHENOL A See Page 50 ortho-CHLOROPHENOL Also known as ortho-hydroxy-chlorobenzene and 2-chloro-hydroxybenzena ORGANIC DIVISION MOLECULAR WEIGHT: 128.56 STANDARD FORM: Liquid. SPECIFICATIONS; Yellow-to-brown liquid; mnnochlorophenol 98.0% min. Distillation range, first drop 173 (>C. nun . 95 1 (1-96 ml) 2.0C. max.; dry point 178.0C. max. USES: An intermediate for the production of alizarin dye*, pyrucatechol, tertiary-butylacatechol, etc. CAUTION: This product is toxic. Avoid breathing its vapora and avoid skin contact SHIPPING INFORMATION: Dye Intermediate NOIBN Product label required. 500-lb. steel drums. 066494 7 TOWOLDMON0043030 para-CHLOROPHENOL Also tnowa ts pare-hydroxy chlorobenzene and 4-chloro-hydroxybemene ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 128.NG STANDARD FORM: Cast solid. SPECI FI CATIONS: Appeara nee crystalline mass; crystallizing point -4H0C' mm. USES: An intermediate m the manufacture of (Juinirarirt Violet. Celliton East !<ed. Violet UN. Indanthrcnc Brown UHH and Alizarin Cyanine Green dyes, poultry-feed supplement to prevent coccidiosis I (11 voucla n Patent): and germicides, miticules and phArniAcuut iculs SHIPPING INFORMATION: Dye Intermediate NOIUN. I'roduct label required 5.50-lh. galv drums, hulk 2, 4-DICHLOROPHENOL Also known as 2.4 dichloro hyd/oxybenzene. ORGANIC DIVISION MOLECULAR WEIGHT: 16.101 STANDARD FORM: Cast Solid. SPECIFICATIONS: Yellow-to-brown crystalline mass; crvstalliring i>oint 41 5(\ min.; distillation range: first drop 214.2C min.: 95% (1-!I6 ml) 3.0C. mux. USES: An intermediate in the production of dysetuffa, herbicides, germicides and fungicides. CAUTION: Care should be exercised in handling this material. Avoid skin contact and breathing its SHIPPING INFORMATION: Chemicals, NOIDN. 600-lb. steel drums. DIHYDROXY DIPHENYL SULFONE Also known as sulfonyl bis phenol. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Fine powder. TYPICAL ANALYSIS: Dihydroxv Diphenyl Sulfone. PURITY 65.82% of 4,4' ISOMER 3508% of 2.4' ISOMER SPECIFICATIONS: Crystalling point 220-234C.. moisture 0.5% PROPERTIES: Readily nitrated and aulfonsted and converted to eaters, ethers, etc. Can be chlorinated but leas readily than phenol. USES: Electroplating hath addition agent (U. S. Steel "Ferroetan" patent); base for phenolic renin*, intermediate in organic synthesis, and antioxidant in polyvinyl chloride reain manufacture. SHIPPING INFORMATION: Chemical NOIHN. 200-lb. fiber drums. para-NITROPHENOL Also known as para-hydroxy-nitrobenzene ORGANIC DIVISION MOLECULAR WEIGHT: 139.11 STANDARD FORM: Granule*. SPECIFICATIONS: Brown granular mm M.P. (dry basis) 112 0C. min.; assay 99.0% min.; water-insoluble material 0.20% max.; methanol-insoluble material 0.20% max. 1<SES: An intermediate in the production of dyestufT* from para* titmnophenol, photographic chemicals such as para-aminophenol and methyl para-aminophenol snd parathion insecticides; fungicide to prevent mold growth on chrome-tanned leather. CAUTION: This product is toxic. Avoid breathing its dust or vapors and avoid contact with the skin. SHIPPING INFORMATION: Dye Intermediate NOIBN Product lnt>el required. 200-lb. filter drums. NONYLPHENOL Alkyl Phenol See Pege 72 PHENOL ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 94 11 STANDARD FORM: Solid or liquid solutions. SPECIFICATIONS: U.S.P.: White crystalline solid; crystallizing point 40.6C. min. Distillation range: first drop 180.0(\ min.; 100% 'first drop to dry point) 2 0l' max , 50% to dry point 0 20. max. Solutions. Colorless mobile liquids; assay: liquid 85%, 85.0 86.0% ; liquid 90% . 90.0-91.0% ; liquid 92% , 92 0-93 0% . GRADES: Crystalline solid, U.S.P.; liquid 85%; liquid 90%; liquid 92% . SHIPPING INFORMATION: Phenol "Poison" lab.-I r,red Tank cars, tank 'rucks, 475.1b. steel drum*. 200.lb tins SULFONIC ACIDS CHLOROSULFON1C ACID INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: ClSOiOH MOLECULAR WEIGHT: 116 53 STANDARD FORM: Liquid TYPICAL ANALYSIS: Heavy mobile liquid, assay uu i ; i 1S( )d (. Fc- 3 ppm. USES: In chlorosulfonation reactions CAUTION t 'hlornsuif',un sold reacts violently with water forming hydrin hlurn and sulbiru- SHIPPING INFORMATION: Uhlrirosulfonic Ami I'r.mmu. liquid (white label required! 700-lh , 'meal sled uni iimnn, steel drums, 8-lb. bottles single, 80-lb. cases of ten. tank - .in and tank trucks. DDBSA 99-B See Pege 70 DDBSA 99U-B See Page 70 PHENOLSULFONIC ACID 98 + % pare isomer, remainder ortho isomer. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 174.17 STANDARD FORM: Oily liquid or crystalline mas* '6 ,% aqueous solution). PROPERTIES: Light l.rown-to-hlack liquid or crystalline mass depending on temperature; assay 65% mm SPECIFICATIONS: Assay 65.0-67.5% free phenol 2 0% max. free sulfuric acid 3.0% max., sp. gr. at 15 5 15 5'C 1345-1 b. . USES: Ferrostan process for tin plating (U S Steel ('-> patent . manufacture of pharmaceuticals, dyestuffs, tanning agents, and other chemical intermediates. SHIPPING INFORMATION: Acid NOIBN liquid 600-11. steel TOLUENESULFONIC ACID Mixture of about 80% para and 20% ortho isomers. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 172 20 STANDARD FORM: Liquid or semi-crystalline solid SPECIFICATIONS: Viscous liquid or semi crystalline -mbd Toluenesulfonic acid 95 0"% min.; HSO< 1 o ', max . i .lu.-ne 0.4% max.; sulfone 1.5% max USES: Acid catalyst in production of alkyd resins, phenol lum.ii dehyde resins and phthalate esters; and in other organic syntheses, production of dyes, acid-resistant cements, rresols. tier i.u ides. epoxy-resin varnishes and tung-od coatings; and refilling of tub..... SHIPPING INFORMATION: Chemical NOIBN 575 lb steel drums, bulk. SULFUR-CONTAINING COMPOUNDS (MISC.) SODIUM meta-NITROBENZENE SULFONATE ORGANIC DIVISION MOLECULAR WEIGHT: 225.15 STANDARD FORM: Wet powder SPECIFICATIONS: Acidity 7% max as H-SO,. water 2 1 assay 70% min.; sulfates 2% max. ss NaSO, 0684946 27 TOWOLDMONOQ43031 USES: An electroplating-bath adriilive; an intermediate in the manufacture of dyestuff*. a mild oxidant in synthetic-fiber dye bath*. SHIPPING INFORMATION: Chemical NOIBN. 250-lb. Poly ethylene-lined filler drums. paraTOLUENESULFONAMIDE Also known s para-toluana sulfonic acid amide and para sulfonamidotoluene. ORGANIC DIVISION MOLECULAR WEIGHT: 17122 STANDARD FORM: Crystalline powder SPECIFICATIONS: White, crystalline powder, crystallizing point (dried material) 136 9''C ................ . max. USES: In the preparation of antiseptics and pharmaceuticals, plant H irers and resins (as s base), and in the preparation of dye stuffs, and as a fungicide for protective coatings. SHIPPING INFORMATION: Chemical* NOIBN. 275-lb. filler drums. para-TOLUENESULFONYL CHLORIDE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 190.65 STANDARD FORM: Briquettes SPECIFICATIONS: White briquettes Aaaay 98% min ; crystal lizing point 66.5G. min. (toluene free). USES: As an intermediate in preparation of dyestuffs such aa Brilliant Sulfon Red. Polar Red, Polar Yellow, azo and tri-phenylmethane dyes; tanning materials; pharmaceuticals; acid resistant cements; anti-oxidants; disinfectants; and photographic chemicals. SHIPPING INFORMATION: Chemicals NOIBN. 300-lb. fiber drums. Product label required. METHYL PCT (0. O-dimethyl phosphorochloridothioate) ORGANIC DIVISION MOLECULAR WEIGHT: 160.51 STANDARD FORM: Liquid. SPECIFICATIONS: Light yellow liquid; asuy 96% min.; specific gravity 25V15.5C., 1.315-1.325. USES: Widespread use in the manufseture of biological toxicants. This chemical intermediate will allow the incorporation of the dialkyl thiophoephoryl group into any ayatem with a suitable reactive center. The well-known contribution to the group to flame reeutance polymer stabilization, and biological activity will auggaet many use*. CONTAINERS: 500-lb. 55-gallon, 16 gauge, lacquer-lined steel SHIPPING CLASSIFICATIONS: Corroeive Liquid NOS. (Cheraicals NOIBN.) Product label required. ETHYL PCT (0. 0-diethyl phosphorochloridothioata) ORGANIC DIVISION MOLECULAR WEIGHT: 168.53 STANDARD FORM: Liquid. SPECIFICATIONS: Colorleae to yellow liquid; away 99.0% rain, specific gravity 25e/15.5C., 1.190-1.200. USES: Widespread use in the manufacture of biological toxicants. This chemical intermediate will allow the incorporation of the dialkyl thiophoephoryl group into any system with a suitable roartive center. The well-known contribution to the group to flame resistance polymer stabilization and biological activity will suggest many uaes. CONTAINERS: 525-lb. 55-gallon, 16 gauge, lacquer-lined ateel SHIPPING CLASSIFICATIONS: Chemicals NOIBN. Product lal>el required. SANTICIZER 1-H PLASTICIZER See Page 55 SANTICIZER 3 PLASTICIZER Saa Paga 55 SANTICIZER 8 PLASTICIZER Mixture of N-Ethyl-ortho- and para-Toluanasulfonamides. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 199.27 STANDARD FORM: Liquid. 28 SPECIFICATIONS: Light yellow, viscous liquid. o,|or slight, characteristic. unsuhatituted amule 9-13% . acidity a* aceiir .n id 0 80 meq 100 gma. max., color of melt 200 APHA max PROPERTIES: Readily miscible with all common organ.r solvents except the petroleum hydrocarbons in which .t is only very slightlv soluble. In water, soluule to approx 0.13% at 2d (', 0 21% at 48C . solubility in water decreased by presence of ammonia hut increased by other alkalies; soluble in castor ml. slightly soluble in chinawood oil. insoluble m linseed oil; retentivity m cellulose acetate approx. 90 parts by weight to 100 of acetate: imparts a high degree of plasticity. A solvent for both nitrocellulose and cellulose USES: An exceUent plasticizer for cellulose acetate, giving a bril liance and polish not obtainable with other plasticizers. SHIPPING INFORMATION: Resin Plasticizer. 530.1b. and AO Ih drums. SANTOLITE MHP RESINS ORGANIC DIVISION- LITERATURE AVAILABLE STANDARD FORM: Hard resin. SPECIFICATIONS: Hard, practically colorleas resin; refractive index (25 gms. in 75 znn. normal butyl acetate) 1 4275 1 1325. penetration (200 gm. load for .5 seconds at 25C.i 2.0 mm. max GENERAL INFORMATION PROPERTIES: An aryl sulfon amide-formaldehyde reain similar to Sontoiite MS in rhararteriHtits. except that it is much harder, softening at about ti2"C , brittle at normal temperatures. Nearly colorlesa. well adapted to specially and heat-sealing lacquers, fabric coatings, molding compositions and the like. Being incompatible with drying oils it cannot tie used aa a varnish material. USES: Can be uaed in spraying, dipping or brushing lacquer* in make clear, colorless, odorless coatings of good gloss and adhesion It does not materially increaae the viscoaity of the solution .tnd permits the building up of a high-solids content in the lacquer Compatible with all the common piaalicizera. CONTAINERS: 60-lb. caaed cana. SHIPPING INFORMATION: Resin Synthetic NOIBN Without Filler. SANTOLITE MS 50% Industrie! Pesm. See page 50 SANT0N0X ANTIOXIDANT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Solid. SPECIFICATIONS: Appearance, light gray to light tan powder. Ash, 0.1% max.; melting point. 150C. min.; moiature, 1.0% max , fineness, 50 mesh (trace, max.). PROPERTIES: Sontonox is probably the beet antioxidant avail able for both low and high density polyethylene. It maintsins the melt index and recovery of the polyethylene in extrusion operation* better than competitive products. It has little or no effect on elec trical properties. USES: Sontonox is used as an antioxidant for polyethylene It ofTere the beet price performance characteristics of all the available antioxidants. Sontonox is approved by the FDA aa an antioxidant for high pressure (low density) polyethylene at 0.05% level for all applications except fatty foods. (Antioxidant for synthetic reams.) SHIPPING INFORMATION: Chemical* NOIBN 1501b tiller containers. SANTONOX R ANTIOXIDANT Sea Page 53 SANTOWHITE CRYSTALS Sea Paga 62 OTHER ORGANIC CHEMICALS ACETONE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 58.08 STANDARD FORM: Liquid. SPECIFICATIONS: Clear water-white liquid. Color Al'HA 5 max . specific gravity 20CC '20'C.. 0.791 to 0.793. distillation rang.*, 1 O'l' to include 56.1"C., moisture 0.5% max. USES: Solvent, chemical intermediate. SHIPPING INFORMATION: Acetone NOIBN Flammable liquid and product labels required. Tank car. tank wagon 0684949 TOWOLDMONOQ43032 BENZYL BENZOATE N.F. ORGANIC DIVISION MOLECULAR WEIGHT; 212 24 STANDARD FORM: Liquid. SPECIFICATIONS; Essentially colorless liquid; crystallising point 18.3aC. min , refractive index 1.568-1.570 at 20(.'.. total cbiorme 0.03% max.; assay 99.0'" min ; sp. gr. 25 2SC. 1.117-1.120. PROPERTIES: High-boiling cater having a pleasant odor. USES: A miticide (acarmidcj; fixative in perfumes, preparation of delousing and insect-rr|>ellent formulations; medicinally in the SHIPPING INFORMATION: Insect Repellent NOIBN. 500-lb. BIPHENYL Also known as diphenyl and phenyibentene ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 154 20 STANDARD FORM: Flakes. SPECIFICATIONS: Colorless to pale yellow crystallized solid or flakes. Freezing point 68.7C. min. USES: Biphenyl is used as a wrapping-paper impregnate to reduce citrus-fruit spoilage; a dye carrier ana accelerator for synthetic fillers; in the manufacture of ceramics; a low-pressure, high-tem perature, non-corrosive beat-transfer medium; and a raw material in the manufacture of a great variety of products, since it is easily chlorinated, sulfonated, nitrated and hydrogenerated. SHIPPING INFORMATION: Diphenyl. 100-lb. bags; 225-lb. bids.. 100-lb. kegs. CYANURIC ACID INORGANIC DIVISION-LITERATURE AVAILABLE USES: Intermediate for chlorine derivatives; cross-linking agent in polyepoxide resins; in manufacture of fire-retardant plastics. TYPICAL ANALYSIS: White crystalline solid: Cyanuric Acid 95% min.; Ammelide 2.5% ; chlorides (as CD 0.1% ; Ammonia (as NHj) 0.05%; Moisture 0.5% max.; Apparent density 0.6 gm/cc; pH 0 gm/100 ml HtO) 3.9. SHIPPING INFORMATION: Packed in 200-lb. net open head fiber drums with a polyethylene bag liner. Shipped as Acid, NOIBN. Dry. CYCLOHEXANOL ORGANIC 0IVISI0N --LITERATURE AVAILABLE MOLECULAR WEIGHT: 100.16 STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, colorless, viacoue liquid; Color 10 APHA max.; Unaaluratee (as Phenol), 0.01% max.; Ketones (aa Cyclohexanone), 0.05% max. USES: Intermediate for plasticizers; in dry cleaning aod textile industries; solvent in dveetuff operations; manufacture of cyclo hexanone and adipic acid. CONTAINERS: 55-gal. steel drums, bulk. SHIPPING INFORMATION: Lacquer Solvent NOIBN, Product label required. ETHYL ACETATE PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Available at following Aasaya: 99.5%, 85 88% . 95-98% . SPECIFICATIONS; Clear and free of foreign sediment; color not greater than 5 APHA units; eater content is minimum 99.5% (aa Ethyl Acetate); odor is non-residual; water is maximum 0.05%. USES: Coatings solvent; cellophane coatings solvent; other miscel laneous solvent uses. INDUSTRIAL USERS: Surface coatings manufacturers (metal, wood, etc.), cellophane manufacturers. SHIPPING INFORMATION: Tank trucka and tank cars only. FORMALDEHYDE PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORMS: Available in assays of 37% . 44% . 50% and 52% methanol free and 37% , 44% methanol inhibited (7% ). SPECIFICATIONS: Clear and free of foreign sediment; color not greater than 5 APHA; sp. gr. 1.0925-1.1136 (depending on metha nol content); assay 37.0% by weight, minimum; acidity no greater than 0.02% as formic acid; iron no greater than 1 part per million; methanol 0 to 1% (methanol-free) and 7 to 8% (inhibited). USES: A preservative, disinfectant and chemical intermediate used in the preparation of melAmine and phenolic resins. INDUSTRIAL USERS: Chemical manufacturers. SHIPPING INFORMATION: Tank trucks. Rail & Truck: For maldehyde, Liquid. GLACIAL ACETIC ACID PLASTIC PRODUCTS AND RESINS DIVISION L,Tf RATi H| STANDARD FORM: A 99 7% minimum a* >e..tie ..on M,.,.r ,i is water white ' SPECIFICATIONS: Clear and free of fore,*,, ,,.,i,.... . .,,,t greater than 5 APHA units, assay minimum 99 7 , ,H , USES: Manufacture of cellulose acetate maniifm tnrc of . mvl ..... manufacture of acetic ester, proprietary vitamins ami in,ids INDUSTRIAL USERS: Textile industry; relluL.se try; vinyl acetate industry Pharmaceutical* and food* SHIPPING INFORMATION: lank truck* and tan* , .,r, only HBPA, HYDROGENATED BISPHENOL A See Page 51 SODIUM BENZOATE, U.S.P. AND TECHNICAL See Page 19 PHOSPHORUS and PHOSPHORUS DERIVATIVES AMMONIUM PHOSPHATES DIAMMONIUM PHOSPHATE INORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 132.068 STANDARD FORM: Crystalline or powdered maim PROPERTIES: Brilliant white crystalline or powder table in air; very soluble in water; pH value of 17 * above 70C. aqueous solutions lose ammonia readily DISSOCIATION PRESSURE: Aceordit g to Hriti (Gmelin'a Handbuch der anorganiscbe 1 and Warren (JACS 49. 1904, 1927): Temp. C. 98 111 NH.inmm. Hg. 3.2 10 7 GRADES: Pood (meets Food Chemicals Codex requir. USES: As a source of phosphorus and non-protein nitron ruminant feeds: Fire retardant; yeast food hy yeast prn.jm-c breweries; as bread improvers, to control pH of *m1.i . r catalyst for urea-formaldehyde resins; chrome dyem* of source of N and PiOt for soluble fertilizers. SHIPPING INFORMATION: Phosphate of Am bags; 300 and 100-lb. fiber drums. ETHYL AMMONIUM PHOSPHATE INORGANIC DIVISION TYPICAL ANALYSIS: 65% solution of Fthyi \. id neutralized with ammonia 33% pjOk, p. gc < .'.Vc t lbs. per gal. SHIPPING INFORMATION: Chemicals. 135.1). .,nd ,,i vi \ .dor,. MONOAMMONIUM PHOSPHATE INORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 115 07 STANDARD FORM: Crystalline or powdered matrn.iJ PROPERITES: A brilliant white crystalline or powdered m stable in air; soluble in hot and cold water. pH <>f I . i,. GRADES: Food (meeta Food Chemicals Codex requiri-m.-ru USES: Flameproofing paper, wood, textile*. [irev.-nt.* matches; for special medicinal purpose*, nutrient *ol....... facture of yeast, vinegar, yeast food*, bread improver* >. in dye bath SHIPPING INFORMATION: Phosphate of \mm.m,, bags; 300 and 100-lb. fiber drums. 0684950 29 TOWOLDMONOQ43033 TRIETHYLAMM0N1UM PHOSPHATE INORGANIC DIVISION GENERAL INFORMATION: An additive for non-aqueous ma terial* for stabilizing corrosive and iron-sensitive liquids such as Lacquers in metal containers. SHIPPING INFORMATION: Flammable Liquid. NOS. (Chemi- cal*, NOIBN.) 40-lb. and 430-lb. drums. CALCIUM PHOSPHATES CALCIUM PYROPHOSPHATE INORGANIC DIVISION FORMULA: CaiPiOi MOLECULAR WEIGHT: 254.10 STANDARD FORM: Powder. PROPERTIES: Finely subdivided powder: contain* CaO, 43.8%; I'rOi, 55.5% . Meets Food Chemicals Code* requirements. USES; Food fortification and vitamin tablets as a mineral supple ment and dentifrice polishing agent. SHIPPING INFORMATION: Calcium Phosphate. 100-lb bags: 400-lb. bbl.; 100-lb. drums. DICALCIUM PHOSPHATE, ANHYDROUS INORGANIC DIVISION FORMULA: CaHPO. MOLECULAR WEIGHT: 136.06 STANDARD FORM: Finely divided powder. TYPICAL ANALYSIS: Total PiO.-51.3% total CaO. Meet* Food Chemicals Code* requirements. PROPERTIES: White, tasteless, finely divided powder. USES: Primarily u a polishing agent in tooth pastes and powders, and as a mineral supplement in foods and cereals. SHIPPING INFORMATION; Calcium Phoephste. 50-lb. bags; 350 and 100-tb. drums. DICALCIUM PHOSPHATE, DIHYDRATE INORGANIC DIVISION FORMULA: CaHPOc2HrO MOLECULAR WEIGHT: 172.09 STANDARD FORM: Powder. TYPICAL ANALYSIS: Phosphorus 18.1%; calcium 23.7%. Meets Food Chemicals Code* requirements. PROPERTIES: White tastelee* crystalline powder; soluble in dilute citric acid solution; very slightly soluble in water; insoluble in alcohol and glycerin. The stabilized dentifrice grade ia prepared specially for use in dentifrices and does not eet-up hard wben used to formulate tooth paste. GRADES: Regular U.9.P. grade +st*biliied dentifrice grade*. USES: Medicinal: mineral supplement for foods and cereals; polishing ingredient in tooth pastes and powders. SHIPPING INFORMATION: Calcium Phosphate. 60 and 100-lb. bags; 100 and 225-lb, 6bar drums. H. T. MONOCALCIUM PHOSPHATE, Monohydnt* \ See Pege 18 LUSTRE-PHOS DENTIFRICE ABRASIVE INORGANIC DIVISION PROPERTIES: White tasteless crystalline powder, insoluble in water and alcohol. GRADES: Dentifrice grades. USES: In dentriflre# ss a controlled abrasive to impart optimum cleaning and polishing of the teeth. SHIPPING INFORMATION: Picalcium Phoephste. 60-lb and 100-lb. baga. PY-RAN ANHYDROUS M0N0CALCIUM PHOSPHATE See Ptgt 18 TRICALCIUM PHOSPHATE INORGANIC 0IVISI0N FORMULA: 3Cai(PO.)< Ca(OH),-3HrO MOLECULAR WEIGHT: 1.058.7 USES: Toothpaste and tooth powder formulation*; a* a mineral supplement in foods and pharmaceutical*, to prevent caking in salt, augar, talc and other powder material*. Meets Food Chemical* Coda* requirement. SHIPPING INFORMATION: Phnephate of Calcium. bO-lb bag* and 150-lb. druma. PHOSPHORIC ACIDS PHOSPHORIC ACID 75.80,nd85% INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: HiPO, MOLECULAR WEIGHT: 98.00 GRADES: N.F.; food, meet* Food Chemical* Code* requirement*, commercial, clear, water-white liquid. SPECIFICATIONS: Clear, water-white liquid miecihle w>th water in all proportion*. 75% . 80% and 85% HjPOi. PHOSPHORIC ACID PLANTS. Complete. wet phosphoric tad mtnulecturing pltnts using tht Prtyon proctss offered by engineering Seles Deptrtment. USES: Manufacture of sodium phosphates, ammonium phosphates calcium phosphates and other phosphates; drying agent in the synthesis of verioua intermediate chemical* anu dyes, process en graving and litho trades; the manufacture of gelatin; substitute (r tartaric and citric acids In jelly, preserves and soft drinks; opAcifier in glass manufacture; manufacture of certain pharmaceutical chemicals and dental cements; manufacture of rustproofing com pounds; silage preservation; defecating and clarifying agent m augar; for brightening the color of silk; dyeing of cotton, calico printing; water softening and correction of alkalinity, ele<tr<i polishing of stainless and carbon steels; aleel pickling, manufnc lure of special bricks; petroleum catalyst; aluminum bright dip i>.iii< component. SHIPPING INFORMATION: Phosphoric Arid. 200 and "wit. stainless steel druma; 700-lh. lacquer lined druma. lank cars and tank trucks. PHOSPHOLEUM SUPER PHOSPHORIC ACID INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: HiPO. MOLECULAR WEIGHT: 98.00 GRADES: Industrial, commercial liquid. SPECIFICATIONS: Clear miscible with water in all proportion* 105% H,POi. USES: Natural desiccant; sequeetrant for trace mineral*. cataly or dehydrator in organic synthesis; drying agent in the synthe*.* of various intermediate chemicals and dyes; manufacture of nut proofing compounds; steel pickling; manufacture of special hn< k. petroleum catalyst. SHIPPING INFORMATION: Phosphoric Acid. lank car* n.d tank trucks. POTASSIUM PHOSPHATES MONOPOTASSIUM PHOSPHATE INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: KHiPO. MOLECULAR WEIGHT: 13609 STANDARD FORM: White crystals. TYPICAL ANALYSIS: P.O., 51.69%; KiO. 34.31%; ignition I.,-* 13.24% , SOi none; pH 4.6. USES: To control pH of culture media in penicillin nianufa, t ,r. special medicinal purpoeea; soluble fertilizers. SHIPPING INFORMATION: Potassium Phosphate .........I 150-lb. net drums, 100-lb. bags. 0684951 TOWOLDMONOQ43034 TETRAPOTASSIUM PYROPHOSPHATE INORGANIC DIVISION FORMULA: K.I'rO; MOLECULAR WEIGHT: 330.34 STANDARD FORM: Powder. PROPERTIES: White powder, hygroscopic in air; pH value in IT- solution 10.4 at 25C.; Bolubilily 190 rmi. in 100 etna, water at 2fC. IISES: In textile oile and aoapa to increase emulsifying values and to prevent formation of insoluble hard water aoapa; clarifying agent; to improve cleansing action of aoapa. SHIPPING INFORMATION: Potassium Phoephate. 350 and lf0-lt>. drums. TRIPOTASSIUM PHOSPHATE INORGANIC DIVISION FORMULA: KjPO* MOLECULAR WEIGHT: 212.27 STANDARD FORM: Powder. PROPERTIES: White cryatalline powder soluble in water; in soluble in alcohol; very bygroecopic. GRADES: Hydrated. USES: Used in synthetic (cold) rubber manufacturing. SHIPPING INFORMATION: Potassium Phosphate. 300-lb. net filter drums. SODIUM PHOSPHATES DISODIUM PHOSPHATE, ANHYDROUS INORGANIC DIVISION FORMULA: Na.HPO. MOLECULAR WEIGHT: 141.98 STANDARD FORM: Powdsr. PROPERTIES: Soluble in water; insoluble in alcohol; on expceure to ait will absorb 2-7 mole HtO depending on humidity ana tem perature; losses molecular water at 240C. forming tetrasodium pyrophosphate; pH of 1% solution 8.8 at 25C. One ib. anhydroua product equivalent to 2.5 lbs. cryatalline (dodecahydrate). GRADES: Food (Granular and Powdered); Medicinal, U.S.P. USES: For boiler water treatment; in making glazes for potteries, porcelains and chinaware; aa an emulsifier in making process cheese; in varioua chemical processes, in manufacture of ayeatuffe such aa Schnitzler'a green; in the preparation of enamels: in tinning and soldering; in leather tanning; aa a bath ingredient in galvanoplaetic work; in the manufacture of pigments such aa cobalt phoephate; in tbe weighting of silk and impregnating of textiles in dyeing and calico printing; in the adjustment of condensed milk; medicinal. SHIPPING INFORMATION; Disodium Phoephate. 100-\b. baga; 350 and 100-lb. drums. DISODIUM PHOSPHATE, DUOHYDRATE INORGANIC DIVISION FORMULA: Na,HPO.-2HiO MOLECULAR WEIGHT: 178.0 STANDARD FORM: CryeUlUne powder. PROPERTIES: Soluble in water, insoluble in alcohol; equivalent to 82% of sodium phoephate, di. anhydrous (see preceding product for further information on properties.) GRADES: Food (conforms with Federal and State Pure Food Laws). USES: Especially recommended for use in preventing coagulation during condensation of milk and as an emulsifying agent in process ing cheese. SHIPPING INFORMATION: Diaodium Phoephate. 100-lb. baga. INSOLUBLE METAPHOSPHATE INORGANIC DIVISION FORMULA: (NaPOi)x MOLECULAR WEIGHT: (102)t STANDARD FORM: Powder. PROPERTIES: Insoluble in water and alcohol. GRADE: Powdered. USES: Primarily in toothpastes and powders. Considered com patible with fluorides in toothpastes. SHIPPING INFORMATION: Sodium phosphate. 60-lb bags; 325 and 100-lb. drums. IP-61 SODIUM TRIMETAPHOSPHATE INORGANIC DIVISION- LITERATURE AVAILABLE FORMULA: (Na.POib MOLECULAR WEIGHT: 305 94 STANDARD FORM: Dry Powder PROPERTIES: IP-61 is a salt of a strong base and a ,tr,,,,g i- id Chemically it has no buffering or sequestering power amt her......... inherent detergent building properties However, when mm, with caustic soda. IP-61 is converted rapidly anil i omplrtei v :o sodium tnpolyphoaphate. SHIPPING INFORMATION: Sodium Phosphate LEVN-LITE* LEAVENING AGENT Ste Page 18 MONOSODIUM PHOSPHATE INORGANIC DIVISION FORMULA: NaHtPO, MOLECULAR WEIGHT: 11999 STANDARD FORM: Powder and granular PROPERTIES: Contains not lees than 58% |M)i. pH value n 1% solution 4.6. GRADES; Food; commercial. USES: Acid phosphate in metal cleaners, water r nnditinner. electroplate solution buffer, textile dyeing aid Kmulsitied n prix i-as cheese, mineral supplement, pharmaceutical ingredient SHIPPING INFORMATION: Sodium Phosphate in<)|h bn*,, 350 and 100-lb. drums. OILFOS GLASSY SODIUM PHOSPHATE INORGANIC DIVISION STANDARD FORM: Dry powder. PROPERTIES: OU/oi is used exclusively for controlling viscosity of oil well drilling muds. SHIPPING INFORMATION: Sodium Phosphate lot) It, ,,et paper bags; triotex baga. PAN-O-LITE LEAVENING AGENT 5 Papa 18 SODIUM ACID PYROPHOSPHATE Sae Page 18 SODIUM HEXAMETAPHOSPHATE INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: An amorphous glass of composition equivalent to NsiaPirOu. AVERAGE MOLECULAR WEIGHT: 1490 STANDARD FORMS: Gian platelets, granules ami powder TYPICAL ANALYSIS: 32.5% total NaiO; 67 0% total P-O-.. pH 1 solution, 6.9; leas than 1.0 ppm Fb; leas than 1.0 ppm K. n 1 ppm AsiOi. trace SO>; 0.010% iron. PROPERTIES; Infinitely soluble in water, liulk den*,tv gl.i** platelets. 77.5 tba./cu. ft ; granules. 99 5 Ibe ,-u ft , powder. 100.0 Ibe./cu. ft. USES: Water eoftener; in treatment of boiler water, m dish washing compositions and detergents; defiocculating agent, tend., and food processing. SHIPPING INFORMATION: Sodium Phoephate. NOIHN ino [h net multiwall paper bags, 100-lb. net burlap bags SODIUM TRIPOLYPHOSPHATE INORGANIC DIVISION FORMULA: Na.PiOn MOLECULAR WEIGHT: 367.93 STANDARD FORM: Granules or powder PROPERTIES: White granular material or white powder wuer. soluble with excellent water-softening and detergent propenie*. CH 9.5 of 1% solution. A calcium sequestering agent and awo i, ,* a igh binding power for moat of the metals of I irnup 11 and i, r, >u t, 1V USES: Soap builder; detergent and water softener <-nn,|,t lonmg oil drilling muds; eliminates scum and soap rur,i* ,n hard a ,>,t SHIPPING INFORMATION: Sodium Phosphate l',i it, !,.,g*. 350 and 100-lb. drum* 0684952 TOWOLDMON0043035 SQ PHOSPHATE* SEQUESTRANT INORGANIC DIVISION STANDARD FORM: Dry powder TYPICAL ANALYSIS: PiO. 63.0% . NaiO 36.0% ; pH 1% solution 7.9. 'PROPERTIES: SQ Phniphole is a glassy polyphosphate with high calcium sequestering |.ropartie*. It is used in formulating industrial cleaning compounds such as dishwashing and dairy cleaners. SHIPPING INFORMATION: Sodium Phosphate. 100-lb. net paper hAgt or triotex hags. STABIL-9 LEAVENING AGENT See Pege 18 TRISODIUM PHOSPHATE, ANHYDROUS INORGANIC DIVISION FORMULA: Na,PO. MOLECULAR WEIGHT: 164 STANDARD FORM: Granular, nearly white crystals. TYPICAL ANALYSIS: Assay, NajPOiTM 97.9% . Loss on ignition at 550-0.- 1.0%. USES: The same as ordinary Trisodium Phosphate but where higher concentration or leas bulk ia desired, one pound is equivalent to 2.33 pounds of the crystalline grade. SHIPPING INFORMATION: Trisodium Phosphate 100-lb. bags; 350 and 100-lb. drums. TRISODIUM PHOSPHATE, CRYSTALLINE INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: Na.P0.12H.O MOLECULAR WEIGHT: 380.16 STANDARD FORM: Crystalline material. SPECIFICATIONS: White crystalline material, uniformly sized; quickly soluble in water giving an alkaline reaction: pH of 1% solution 11.8. USES: Principally in cleaners and detergents for both household and industrial use; in fruit cleaning to remove insecticide sprays and inhibit growth of fruit mold; in water treatment for softening and conditioning water. SHIPPING INFORMATION: Trisodium Phosphate. 100-lb. bags; 325 and 100-lb. drums. TETRASODIUM PYROPHOSPHATE INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: NtJ'iOi MOLECULAR WEIGHT: 265 95 STANDARD FORM: Crystals or granules. PROPERTIES: While crystalline material or white granular powder; pH of 1% solution 10.2; solubility; 6 parts in 100 psrts of water at 15C., 40 parts in 100 parts of water at 100C. GRADES: Anhydrous. USES: As s soap builder; conditioning oil drilling wells; in bleaching, especially for straw, and as an ink eradicator; in manufacture of iron pyrophosphate and other pyrophosphate*; household and industrial cleaner and detergent; in dye bath for putting certain types of dye in complete eofution; electroplating; metal cleaning; electrolytic separation of various metals; as emulsifier in process cheese manufacture; degumminq: textiles; stabilizing hydrogen peroxide baths; reagent for de-inking newsprint. SHIPPING INFORMATION: Sodium Phosphate. Regular--100-lb. i>aj>er hags, 200-lb. and 100-lb. drums; Powdered--100-lb. paper nags; 350-lb. and 100-lb. drums. OTHER PHOSPHORUS AND PHOSPHORUS DERIVATIVES ALKOPHOS Aluminum Acid Phosphites. INORGANIC DIVISION STANDARD FORM: Liquid. PROPERTIES: Alkophoe C 1.47% Alkophos CD 36LO% 11.0% 1.60% USES: Coaling for electrical sleel transformer and motor laminalions; hinder for high temperature insulation brick and other refractories; high temperature water insoluble binder or adhesive. SHIPPING INFORMATION: Aluminum phosphate. 175-lb. and 650-lb. drums. 32 ALKYL ACID PHOSPHATES INORGANIC DIVISION-LITERATURE AVAILABLE TYPICAL ANALYSIS: Phosphoric P-Oi Acid Eater % Amyi n-Butyl Kthvl 40 40 54 Sp. Gr. fa 25 C. 1.09 1.13 1 29 1.21 Lbs. per Gal. 9.1 9.4 10.7 10.1 And No Mg KOH g USES: Additions to paint and varnish compositi adhesion to metal surfaces: as CAtalyst in urea rest polymerizing agents for resins and oils. SHIPPING INFORMATION: Acids Liquid NOIHN. Amyl 135.|h and 500-lb. drums. n-Hutyl: 135-lb. and 500-lb rlruins Klhyl 150-lb. and 575-lh. drums. n-Propyl 140-lb. and 525-lh. drums. CRESYL DIPHENYL PHOSPHATE rGesolmi Grade) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Clear, light amber liquid. SPECIFICATIONS: Color NPA 1.5 max., sp gr 1.200 1 >r> it 25/25C.; Phosphorus 8.7--92%; Acidity 0.2 mg. KOH gram GENERAL INFORMATION: Soluble in aromatic and alif.nc solvents, insoluble in water. Soluble in gasoline at dosage normally used. USES: Effective in combating abnormal combustion due to glowing combustion chamber deposits and fouled spark plugs A proved surface ignition control agent and combustion deposit modmer Recommended dosage 0.4---0.6 cc Cresyl Diphenyl Phosphate per gallon of gasoline (varies depending on lead content of gasoline i SHIPPING INFORMATION: Gasoline Additives, containing leas than 50% Petroleum Oil (Chemicals. NOIHN). 55-gal. nonreturnable black iron druma; tank cars and tank trucks. CRESYL DIPHENYL PHOSPHATE (PIisvcuii Gride) SANTICIZER 140 See Pege 56 DEQUEST 2000 Deflocculetmg end seauestering agent INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Pale yellow aqueous solution. 50% active, sp. gr. 1.33 (a, 20/10C., pH (1% solution (<ii 25C.) <2.0. PROPERTIES: A highly effective, hydrolytically stable organophosphorus deflocculating and sequestering agent which not only forms stable chelates with all heavy metal ions hut also, as a strong electrolyte, has excellent dispersing ability and exhibits threshold inhibiting effect in preventing the precipitation of insoluble minerals USES: Useful in any aqueous system for the prevention of scale formation or to inhibit precipitation. A particularly effective additive in acid cleaner formulations for the control of extraneous metal ions and to improve soil or scale removal. Stabilizes solutions of hydrogen peroxide. Effective rust remover. SHIPPING INFORMATION: Tank cars; tank trucks; 15 gal and 30 gal. polyethylene lined fiber drum* and 55 gal. polyethylene coated DEQUEST 2006 Deflocculetmg tnd sequestering agent INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS: Pale yellow aqueous solution. 4l)G active, sp. gr. 1.41 -- 20,/10C.. pH (1% solution fa. 25(.\) 1 o 0-11 o PROPERTIES: DEQUEST 2006 ia a solution of the sodium salt of DEQUEST 2000. (See above.) USES: An excellent deflocculating and eequestering agent REQUEST 2006 has the same performance qualities as RE QUEST 2000. In its sodium salt form it is directly useful in neutral or alkaline systems for the removal or prevention of scale nr to prevent mineral precipitation. An effective agent for defloccul.it mg clay*, cements, resins, pigments and the like. A particularly effect vc additive for alkaline cleaners (such as bottle washing formulas <>r dairy cleaners) or in general purpose detergents to improve mil removal and counteract water hardness or other mineral inter ferences. By controlling "tramp" metal iona. RHQl'EST 3'x>d is effective in stabilizing peroxide bleaching baths and in the stabiliza tion of soaps and detergenta. FERROPHOSPHORUS Iron Phosphide. INORGANIC DIVISION STANDARD FORM: Chill cast lump*, egg size. ') inch or less TYPICAL ANALYSI9: A gray alloy of iron and phosphorus win. I. fractures easily; contains 23-26% phosphorus. 0684953 TOWOLDMONOQ43036 -w: USES: Used in iron and steal castings to increase fluidity; in sheet steel to prevent slicking of sheet* in final rolling; in wire to give stiffness and l>etter surface for drawing; paint pigment; neutron harrier in radiation shielding concrete and denaincation of drilling muds and explosives. SHIPPING INFORMATION: Ferrophoaphorus. Bulk; 500-lb. bble. METHYL DIPHENYL PHOSPHATE (Ottered as Phostane Brand of MDP) See Page 35 PHOSPHORUS, ELEMENTAL INORGANIC DIVISION-LITERATURE AVAILABLE PROPEKT1ES: Light yellow, waxdike semi-tranaparent solid burn* spontaneously in air to form P-Oi; M.P.44. 1C.. very soluble in carbon btaulfide. insoluble in water. GRADES: Monsanto process of manufacture provides over 99.9% purity. USES: Manufacture of phosphorus alloys, phosphoric anhydride, phosphorus compounds, phosphoric acid, rodent poisons, flares, smoke screens, etc. SHIPPING INFORMATION: Phosphorus Yellow, toxic and inflammable (yellow label required.) 400-lb. drums; tank cars. PHOSPHORUS OXYCHLORIDE INORGANIC DIVISION-LITERATURE AVAILABLE FORMULA: POCI. MOLECULAR WEIGHT: 153.35 STANDARD FORM: Liquid. TYPICAL ANALYSIS: Water-white liquid; assay 99.75% POCIr sp, gr. lf>.sc./15.sc.. 1.685; free Cl:, trace; PCh. 0.12% ; distil lation range C.: first drop 106.7, 1-96 ml 1.0, dry point 107.9. USES: A chlorinating agent and catalyst in the preparation of various intermediates, dyestuffs, medicinal*; reagent in the prepara tion of acetic anhydride and organic phosphates. CAUTION: Care must be exercised in handling this product. Avoid breathing its vapors. Avoid contact with the skin. It reacts with water with explosive violence. SHIPPING INFORMATION: Phosphorus Oxychloride. Corroeive liquid (white label required). 725-lb. nickel drums; 4,000 and 8,000-gal. nickel tank cars. PHOSPHORUS PENTASULFIDE INORGANIC DIVISION FORMULA: PSi. MOLECULAR WEIGHT: 444.58 STANDARD FORM: Light greenish yellow granular powder. PROPERTIES: Monsanto is unique in offering both highly reactive and low reactive grades distilled for highest purity. USES: Manufacture of lubricating oil additives: thiophoephate insecticides; thiophoephate salts for ore flotation: also aa a catalyst in production of blown asphalt; and as an intermediate in organic synthesis. SHIPPING INFORMATION: Phosphorus Pentasulfide. 150 and 325-ib. drums. PHOSPHORUS PENTOXIDE (Phosphoric Anhydride) INORGANIC DIVISION FORMULA: PiO. MOLECULAR WEIGHT: 141.96 STANDARD FORM: White microcrystalline powder. PROPERTIES: Vapor Preaeuree: (after J. C. Southard and R. A. Nelson--JACS, 59, 911 -1937-) n -vapor pressure in cm. of mercury T -absolute temperature A (low temperature form) B (high temperature form) L (liquid) Logmp - 9.792--(5000/T) I.ogi0p - 1 l.l 13--(7930/T) I-ogioP - 6.809--(4320/T) Atmospheric sublimation temperature: 358.9C. Heal of vaporization: A--22,800 calories per gm. molecule H--36.200 calorie* per gm. molecule L--19.700 calorie* per gm. molecule Heat of fusion: 16.500 calories per gm. molecule Probable molecular formula of vapor: PiOio TYPICAL ANALYSIS: PiOi--99.5% lower oxides .01% as P-O,, color 60% water solution 50 APHA. USES: Aa a desiccant; in the production of alkyl phosphates: a catalyst in air blown asphalt; in the manufacture of fluorophosphates; in the making of phosphorus insecticides; and in the production of oil additives. SHIPPING INFORMATION: Phosphoric Anhydride. (Flammable - yellow label required). 400 and 60-lb. drums. PHOSPHORUS TRICHLORIDE INORGANIC DIVISION-LITERATURE AVAiLABlF FORMULA: PCIi MOLECULAR WEIGHT: 137 35 TYPICAL ANALYSIS: Water-white *p gr 15 5'C. 15.5'C 1 586; disltlUut 1-96 ml 0 9. dry point 76.0 USES: A chlorinating agent and catalyst various intermediate* and dyestuffs; regcn acetic anhydride, organic phosphate*, geru manufacture of phosphorus oxychloride .i chloride; in producing iridescent metallic J CAUTION: Care must t>e exercised m handli with water Avoid breathing ita vapor* Avoi SHIPPING INFORMATION: Phosphorus liquid" label required. 675-lb i approx . m 8,000-gal. nickel tank cars. TRICRESYL PHOSPHATE See Peges 36 end 54 TRIPHENYL PHOSPHATE See Page 54 TRIPHENYL PHOSPHITE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 310 28 SPECIFICATIONS; Light yellow solid or oily liquid *p gr It. to 1,183: free phenol 0.5% max. hydrolyzable , hlorme < J : i ] ' max.; color A PHA SO max , refractive index ,it J.i'r i .* .' i,, i m PROPERTIES: A crystalline solid at slightly la-low r.,m temper i tute; at higher temperatures it an oily liquid weighing about > Jlb*, per gsl. USES: A color improver and metal scavenger in alkvd resin prodmtion. Also used as a stabilizer in polyvinyl chloride t-ofiip-n:> i Monsanto's patent No. 2572571 covers this and resellers .um usermust be licensed. SHIPPING INFORMATION: Chemicals NOIRN 55 and 5.g,| PETROCHEMICALS BENZENE HY0R0CARB0NS AND POLYMERS DIVISION FORMULA: C.H. MOLECULAR WEIGHT: 78.1 STANDARD FORM: Liquid. GENERAL INFORMATION: Benzene is an aromatic livlm, arhori used in the manufacture of styrene, phenol, cyclohexane synthetic detergents, and many other organic chemicals and intermediates SHIPPING INFORMATION: Benzol. Flammable liquid Red Libel Barges, tank cars, tank trucks. BUTENE-2 CONCENTRATE HYDROCARBONS AND POLYMERS DIVISION FORMULA: CH. CH -CH CHi MOLECULAR WEIGHT: 56.1 STANDARD FORM: Liquid (under pressurei GENERAL INFORMATION: Butene-2 fom-enrraie i* a ...lories* olefinic hydrocarbon used as a cross linking agent in the tnarni facture of chemical intermediate* ami in specially solvent applica tions. It i* predominantly cu and Irani butene 2 SHIPPING INFORMATION: Liquefied petroleum ga* I-1 u.unable gas; red gas label. Tank cars, tank trucks. BUTYLENES Mined Isomers HYDROCARBONS AN0 POLYMERS DIVISION FORMULA: C.Hi MOLECULAR WEIGHT: 56.1 STANDARD FORM: Liquid (under pi ensure i GENERAL INFORMATION: Mixed butylene* .re *.-d "... constituent* are iso butylene and n-outene l SHIPPING INFORMATION: Liquefied net r<-h-,,m o* ,,,.x.-d butylenes). Flammable gaa. red gas label I n,* . ,r* m* n o 0664954 TOWOLDMONOQ43037 **.-} i-~ fflnirtill~ 0jjt~ ,i 7 C AROMATIC CONCENTRATE Mixed Isomers HYDROCARBONS AND POLYMERS DIVISION FORMULA: (CHi)i CiHi MOLECULAR WEIGHT: 120.2 . STANDARD FORM: Liquid. GENERAL INFORMATION: Thi* u a highly concentrated Ct aromatic itream containing primarily tri-melhyl-benzene nomen. It ia uaed in specialty solvent applications and in manufacture of chemical intermediates. SHIPPING INFORMATION: Petroleum Naphtha. Tank care, tank DICYCLOPENTADIENE CONCENTRATE HYDROCARBONS AND POLYMERS DIVISION FORMULA: C.H.C.H. MOLECULAR WEIGHT: 132.20 STANDARD FORM: Liquid. GENERAL INFORMATION: Dicyclopentadiene concentrate contains approiimately 85% dicyclopentadiene. and is used in manufacture of hydrocarbon resins, insecticides, surface coatinga, and chemical intermediates. SHIPPING INFORMATION: Petroleum naphtha; tank care. ETHYLENE HYDROCARBONS AND POLYMERS DIVISION STANDARD FORM: Gaa FORMULA; C.H. MOLECULAR WEIGHT; 28.05 TYPICAL ANALYSIS: 99.80% min. USES: Major uses are in ths production of polyethylene, ethyl alcohol, ethylene glycol and alyrene and varioua other chemical in termed iatee. SHIPPING INFORMATION: Ethylene Gas by Pipeline. ISOPRENE CONCENTRATE HYDROCARBONS AND POLYMERS DIVISION FORMULA: CH. -CHC(CH.) -CH. MOLECULAR WEIGHT: 68.1 STANDARD FORM: Liquid. GENERAL INFORMATION: Ieoprene concentrate contain* approiimately 60% ieopreue, in a mixture with other Ci hydro carbons. It is used in the production of isoprene monomer for cispolyisoprene rubber, and as a raw material for resins and inter mediates. SHIPPING INFORMATION: Petroleum Oil, NOIBN (Petroleum partially refined). Flammable liquid. Red label. Tank trucks. METHYLACETYLENE/ALLENE CONCENTRATE HYDROCARBONS AND POLYMERS DIVISION FORMULA: CH -C--CH./CH. -C -CH. MOLECULAR WEIGHT: 40.1 STANDARD FORM: Liquid (under pressure). GENERAL INFORMATION: Methylacetylene/allene concentrate is a reactivs light hydrocarbon for chemical synthesis. It has reactive properties similar to those of acetylene, yielding interesting specialty derivatives. SHIPPING INFORMATION: Liquefied petroleum gas. Flammable gas; red gas label. Tank care. PARA/META XYLENES HYDROCARBONS AND POLYMERS DIVISION FORMULA: (CHi).C.H< MOLECULAR WEIGHT: 106.2 STANDARD FORM: Liquid. GENERAL INFORMATION: Para/Meta xylenes are used in the production of chemical intermediates such as terephthalic acid, dimethyl terephthalale and iaophthalic acid. SHIPPING INFORMATION: Xylol. Flammable liquid; red label; barges. PIPERYLENE CONCENTRATE HYDROCARBONS AND POLYMERS DIVISION FORMULA: CH. -CHCH -CHCH. MOLECULAR WEIGHT: 68.11 STANDARD FORM: Liquid. GENERAL INFORMATION: Piperylene concentrate fonhua approximately 50% trans and cia-piperylenee, and u. uvl in rn.mu facture of hydrocarbon reams and chemical intermrdi.<u<s SHIPPING INFORMATION: Petroleum Oil. NOIBN (Pel minim partially refined). Flammable. Red label Tank care. PROPYLENE HYDROCARBONS AND POLYMERS DIVISION FORMULA: CHiCH -CH. MOLECULAR WEIGHT: 42.1 STANDARD FORM: Liquid (under pressure). GRADES: 92% min. purity. GENERAL INFORMATION; Propylene is an olefinic hydrocarbon raw material used in manufacture of alcohols, acrylonitrile, phenol and other chemical intermediates. The other principal component SHIPPING INFORMATION: Liquefied petroleum gaa Flammable gaa; red gas Isbel. Tank care, tank trurke RESIN OIL HYDROCARBONS AND POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: Reain Oil ia a highly unsaluratcd alkyl-aromatic hydrocarbon mixture used in the manufacture of high-grade petroleum resins. SHIPPING INFORMATION: Petroleum naphtha Bargee, tank care, tank trucka. RESIN PR HYDROCARBONS AN0 POLYMERS DIVISION DESCRIPTION: A heavy aromatic petroleum reeidue. USES: In the production of petroleum coke, carbon black and . miscellaneous other induetrial application*. SHIPPING INFORMATION: "Resinous petroleum residue by product of ethylene production." In barges, tank care and trucks TOLUENE HYDROCARBONS AND POLYMERS DIVISION FORMULA: CHi CH MOLECULAR WEIGHT: 92.1 STANDARD FORM: Liquid. GENERAL INFORMATION: Toluens is an aromatic hydrocarbon used in the manufacture of a variety of organic intermediate* anil in a broad range of solvent applications. SHIPPING INFORMATION: Toluol. Flammable liquid; red Inlx-l Bargee, tank cars, tank trucks. PETROLEUM ADDITIVES CRESYL DIPHENYL PHOSPHATE ORGANIC DIVISION --LITERATURE AVAILABLE STANDARD FORM: Light amber fluid. TYPICAL PROPERTIES: Specific Gravity ($ 60/60aF. . . Viscoeity, C 0F., ce....... . il 100F., cs.. . . (a) 210'T., ce... Flaah Point, SF...... Crystallizing Point, "C., max. Refractive Index fti 77F. Boiling Point (760 mm), *F.. Acidity, % aa HiPOi. . . Phosphorus, % (wt.) . . .. ... Wt. per gal. . ................ . .1 -,(1 l'No IT 2 '> U''ii *' 1 'b<> :"'4 " "I m, i 1 1" 1 USES: Creayl Diphenyl Phosphate, added as s aupplcm.-m m scavenger to gasoline containing TEL fluid, will control - " ' ignition and spark plug fouling. SHIPPING INFORMATION; Gasoline additive rnntainmg than 50% petroleum oil/ehemical* NOIBN Tank cars. y.i non-returnable black iron drum* containing approximately > ll>s. net. 0684955 TOWOLDMONOQ43038 METHYL DIPHENYL PHOSPHATE lotf'd as Phostane Brand ot MDP) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Clear, oily liquid. SPECIFICATIONS: Color Al'HA 200 max.: ap. gr. 1.225--1.235 at 25/25C.; phosphorus 11.5% mm.; pour point - 85F. USES: Effective in combating abnormal combualion due to glowing combustion chaml>er deposit* and fouled spark plugs. A proved surface ignition control agent and combustion deposit modifier. SHIPPING INFORMATION: Carbon. Cum or Sludge Removing Compounds, NOIHN; 55-gal., non-returnable black iron drums, tank cars, tank trucks. PC-1244 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Clear, light yellow liquid. TYPICAL PROPERTIES: Specific Gravity 60 60F. Viscosity << 100F., cs. Wl. per gal. . .. 0.86 . 32 7 .. ........................7.72 lbs. USES: PC-1244 La an additive whoee presence in low concentration suppresses foaming tendencies in lubricating oil formulations. Defoamer PC-1244 is an oil-disperaable solution of a non-metallic compound in petroleum distillate. SHIPPING INFORMATION: Chemicals NOIBN. 56-gal. nonreturnable black iron drums and 5-gal. drums. SANTOLENE C FUEL OIL ADDITIVE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid PROPERTIES: Viscosity $ 100F. 259 SUS, Flash Point, F. 170 sp. gr. 60/60F. 0.884. IISES: Corrosion and rust inhibitor in light petroleum distillates resulting in significant reduction of rusting and corrosion of pipelines and other petroleum product transmiaaion equipment. SHIPPING INFORMATION: Petroleum Oil NOIBN. 55-gal. steel drums; tank car*. SANTOLUBE 70A OIL ADDITIVE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM : Liquid. PROPERTIES: An oily viscous liquid having the following typical properties: ap. gr. 0.926 at 60"/60F., Say bolt Universal viacosity 240 seconds at 210F. USES: Huai inhibitor for turbine oil*. SHIPPING INFORMATION: Petroleum Oil NOIBN. 55-gal. steel SANTOLUBE 392 OIL ADDITIVE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: LiquidPROPERT1E9: Flash Point 330"F.; phosphorus 7.3%; sulfur 15.2% ; zinc 6.3% ; vicsosity at 100F. 1260 SOS. at 210F. 60 SUS; sp. gr. at 60/606F. 1.104, USES: An effective inhibitor and motor oil anti-oxidant for up grading the quality of straight bass oils when used alone and which is also used in combination with detergent-dispersant additives (e.g., -Santolubt 203-C, 333, 401, 410) to meet operating conditiona imposed by passenger car*, trucks, tractors and other equipment powered by petroleum fuels. SHIPPING INFORMATION: Chemicals, NOIBN. 55-gai. black iron druma or tank cars. SANTOLUBE 393 OIL ADDITIVE (ZINC DIALKYL DITHIOPHOSPHATE) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A liquid with the following typical properties: Viscosity at 100F. of 150 centiatokee; Flash Point 260F; ap. gr. 60"/60F. of 1.120. USES: An effective and versatile anti-oxidant and bearing corrosion inhibitor for lubricating oils. Finds wide application in compounding Premium and Heavy Duty Motor Oils. SHIPPING INFORMATION: Chemicals NOIBN. 55-gal. black iron drum*; Lank cars. SANTOLUBE 394-C OIL ADDITIVE 4 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: All amber, viacoua liquid With the followi ng approximate properties: viscosity 15 to 25 cte. at 210F.; sp. igr. 1.02 at 60,/60"F.; phosphorus 4.7% ; sulfur 13.1% . USF.S*. An effective and versatile anu-nxtdani ,irui V>earin* or...,,,n inhibitor for engine lubricating oil* f ind* wide ,i(i|du .it mr, compounding Premium and Heavy Duty Motor Oil* SHIPPING INFORMATION: Petroleum Oil* NOIHN ,.<.,1 steel druma. tank cars. SANTOLUBE 693 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Dark viscous liquid. TYPICAL PROPERTIES: Barium. % wt. Calcium, % wt. . Nitrogen, % wt. Phosphorous. % wt Sulfur. % wt.. . . ]i | >; u i; )| io S'pec'ificf Gravity. 60'60F y at 210F . cs. THN .. Wt. per gal. 1 -!.to l td mi t it.* USES: Santolubt 693 ts a complete additive package designed f,,r high quality diesel luhncAnt* The product also provide* very good automotive MS performance when used st high performance di<-u-l SHIPPING INFORMATION: Petroleum oil NOIHN lank 65-gal. non-returnable black iron drum* (54 gals net SANTOLUBE 698 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Dark viacoua liquid TYPICAL PROPERTIES: Barium. % wt. min. Calcium, % wt. min. . . Nitrogen, % wt. min. Phoephorua. % wt. min. Sulfur. % wt. min. . . Zinc, % wt. min. . Specific Gravity, 60/60F.. Viscosity, ca. at 210F. Wt. per gal.... o .1 .'6 o ,,'4 d .'(> t n no I nio 50 st II.* USES: Santoiubt 698 is a low ash additive package for Sene* III/M1L-L-45199A engine oil formulations. API Service MS per formance with Sanlolube 698 baa also been demonstrated as meaa ured by the Sequence IIA, 111A and Sequence V lest*. SHIPPING INFORMATION: Petroleum oil NOIBN lank cr*. 55-gal. non-returnable black iron drums (64-gala net* SANTOLUBE 875 OIL ADDITIVE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: An oily liquid fluid having the following lyptcal properties: sp. gr. 60/60F , 1.03; Wt. per gal 60 biHF . i* 5 7 Viscosity (a. 2103F. SUS. 275; Flash Point COCF . 350. Calcium. % wt.. 4.3; Phosphorus, % wt.. 1.21; Sulfur, % wt , 2 US, and /.me % wt., 1.30. USES: SanUJube 875 is a multi-functional crankcase lubricant additive designed at 5.3% to 5.5% volume to give 1966 "MS" and Mil Spec. MIL-L-2104B performance. SHIPPING INFORMATION: Petroleum OU NOIBN 55-gal steel drums; tank cart and tank trucks. SANTOLUBE 899 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM; Dark viscous liquid. TYPICAL PROPERTIES: Calcium. % wt... . Zinc, % wt............ Phoephorua, % wt.. Nitrogen, % wt. . Sulfur, % wt. . Specific Gravity, 60/60F. . TBN Wt. per gal.... . td 1 'i5 n t. us Jt I oi 115 >< 4 lt>* USES: SankJub* 899 is a complete additive package designed to give excellent Automotive MS performance. SHIPPING INFORMATION: Petroleum oil NOIBN lank car*, drums, non-returnable black iron, containing 64 gals SANTOPOID 22-RI GEAR OIL ADDITIVE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A foam-inhibited, dark, oily liquid having aui-rmr rust preventive properties and the following typical j r- i-r 11 sp. gr. 60/60"F. 1.135% ; flash point 300"F . lulfur 13 . (dm* phorous 4.0% ; chlorine 14.5% ; zinc 3.7% . USES: Used in compounding gear lubricants aa defined t-v -be American Petroleum Institute aa GL-4 type service Also -ned m compounding gear lubricant* complying with MU. I 'kiJ; \ Ordinance (this specification will be called M1I.-L-2I05H b<-n it receive* full acceptance by the armed services as anticipated 0684956 TOWOLDMONOQ43039 V SHIPPING INFORM ATIOS : Lubricating oil additive, containing Ins than r>0% petroleum ml (chemicals NO!BN>. 54-gal. black iron drums, Uuk cars. SANTOPOID 23-RI GEAR OIL ADDITIVE ORGANIC DIVISION- LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A foe i-inhihited. dark liquid having superior rust ive properties ind the following typical properties. Pour 1 5V' , flash : lint 3(XiF ; sp. gr 60 60F. 1 1 GO; vis. at :r,0 SI'S, aulfi 13.3T . chlorine 14.0r ; phosphorus; 4.17o , USES: To rom|x>und multi-pi adequate perforins nee in Aulor slip mechanisms, also to fonnu M11.-L 002105A Ordinance ah 1.-21(1311 when it receives full anticipated!. >sc Hypoid lubricants providing ive axles equipped with limited * gear lubricants complying with ipec-ification will )>e called MILeptancc by the armed forces as SHIPPING INFORMATION: Lubricating oil additive containing less than bO'T petroleum oil (Chemicals NOIHN). 34-gal. black SANTOPOUR C OIL ADDITIVE ORGANIC DIVISION - LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A dark liquid with the following typical properties: Flash Point 3f>0F ; viacoaity 1020 SUS at 210F.; ap. gr. 60/60F. 0.910. IISES: An effective and economical pour point depreaaant for all tvpea of wax-hearing oils. Effective at concentrationa aa low aa 0.62% . SHIPPING INFORMATION: Petroleum Oil NOIBN. 55-gal. black iron druma; tank cars. TRICRESYL PHOSPHATE ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Amber liquid. TYPICAL PROPERTIES: Specific Gravity 60/60F. . Flash Point, t . . Crystallizing Point Pboapborua, % wt.. min. Wt. per gal. . . .......... -31F. IISES: TCP has been proven effective aa a mild EP additive in certain hydraulic and aynlhetic oila. Approval under Military Specification MIL-1,-7078F has t>een achieved with Monsanto TCP. SHIPPING INFORMATION: Keein plaaticizer. Tank cars, tank Irurka; 55-gal. black iron, non-returnable druma. PETROLEUM PRODUCTS and CHEMICALS LION PETROLEUM PRODUCTS/CHEMICALS GASOLINES \ LION PREMIUM GASOLINE WITH LIONITE ADDITIVES ' HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: Thia high-octane premium gasoline is refined through advanced processing methods at the Lion Re finery. K.l Dorado, Ark. Equipment employed is of modern design, including a Model IV fluid-type catalytic cracking unit, a Thermofor catalytic cracking unit, ft vapor recovery and polymerisation unit. alkviAlion unit, chemical treating plant and other related equip ment. Lionilt. a petroleum-type additive, is employed to impart special properties to the finiahed product. USES: Automotive fuel. SHIPPING INFORMATION: Lion Premium Gasoline w.th /.ionite w marketed only through Lion service stations. 36 LION REGULAR GASOLINE WITH LIONITE ADDITIVES HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: Thia high-octane regular gasoline refined through advanced procoseing methods at the I,ion Refinery. El Dorado, Ark. Equipment employed is of modern design. m< bill ing a Model IV fluid-type catalytic cracking unit, a Thermofur catalytic cracking unit, a vapor recovery and polymerization unit, alkylation unit, chemical treating plant and other related equip ment. Ltonite. a petroleum-type auditive, ia employed to impart special propertiea. While the octane rating of Lion Regular Gasoline is not as high as for Lion Premium Gasoline, tins prixluct m out standing in octane for regular grade gasolines USES: Automotive fuel. SHIPPING INFORMATION: Lion Regular Gasoline with Lionite is marketed only through Lion service stations. PREMIUM GASOLINE Unhanded HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: I.iquid GENERAL INFORMATION: Premium gasoline, refined to high standards of quality and performance, is available in grades ranging from 98 to 100-octane ratings. USES: Automotive fuel. SHIPPING INFORMATION: Gasoline (Dangerous placard- ap plied). Railroad tank car, transport trucks, bargee, ami pipe line REGULAR GASOLINE Unhanded HY0R0CARB0NS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION; Regular gasoline, refined to excellent standards of quality and performance, ia available in 92 to 94 octane ratings. USES: Automotive fuel. SHIPPING INFORMATION: Gasoline (Dangerous placards ap plied). Railroad tank car, transport trucks, bargee, and pq> line. GEAR LUBRICANTS LION ALL-PURPOSE GEAR LUBRICANT HY0R0CARB0NS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: An exceptional, premium quality extreme pressure gear oil. It ia specially fortified with carefully selected additives to promote longer gear life under the num severe operations. It ia recommended for rear axlee of hypoid. -pir.il bevel and spur gear types. Meets MIL-L-2105 specifications. SAE GRADES: 80. 90. U0 and 250. SHIPPING INFORMATION: Lubricating Oil. 427-lb and 120-lb drums aod 40-lb. pails. LION GEAR LUBRICANT MINERAL HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A "regular" type, or straight miner al. gear oil made from an exclusive high quality base of fullv refined lubricating oil. This lubricant ia used in transmissions, different < and other gear seta when a "regular" type gear oil or airtight mineral oil is recommended. It is not recommended for extreme pressure or severe service conditions. SHIPPING INFORMATION: Lubricating Oil. 427-lb. T.'o lb drums, 40-lb. pails. LION INDUSTRIAL OILS AZALEA OILS HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A fine line of carefully refined tml-f grade oila. They are of the finest quality, and all contain mi hibitors. oxidation inhibitors and anti-foam agents. This broad of oils makes it possible to select just the proper oil for ,1 -pi use. Lion Azalea Oils are used in hydraulic systems, high -p.. 1 spindles, electric motor bearings, steam turbines, speed reducers 1 SHIPPING INFORMATION: Lubricating Oil. 55-gal drum. ... ! 5-gal. cana. 0664957 TOWOLDMONOQ43040 BAIZE OILS HYDROCARBONS i POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: Made from a high quality, naph thenic crude and fully refined oil. They have high film strength and good stability, together with heat resisting properties. These oils are recommended for speed governors on engines, ring oiled bear ings. electric motors and generators: gas. gasoline and diesel engines employing either air or mechanical injections, and other instances where products having the Buize properties arc recommended. I urn Hour oils contain oxidation inhibitors and anti-foam agents. SHIPPING INFORMATION: Lubricating Oil. 55-gal. drums; and CODA OILS HYDROCARBONS POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: These are fully processed, straight mineral oil* and are uauallv designated a* "engine oils." They are used under a wide range of conditiona such as those found to exist with centrifuge machines, cream separators and spindles. They are also used on ring oiled bearings, chain-oiled or hand-oiled bearings, machine tools, woodworking machinery, rock product machinery and conveying equipment. SHIPPING INFORMATION: Lubricating Oil. 55-gal. druma; CYLINDER OIL Mineral and Compounded. HYDROCARBONS 8. POLYMERS DIVISION STANDARD FORM: Liquid, GENERAL INFORMATION: For lubrication of steam cylinders and valves, steam niggers and bearings. A filtered, steam refined cylinder oil which gives excellent reeults with medium pressure steam. A good general purpose oil for saw-mill use. It cornea in a 5% compound for average saturated steam pressures (150 to 175Ih.j and an 8% compound for excesaively wet steam. GRADES: A. B, C, D, E. SHIPPING INFORMATION: Lubricating Oil. 55-gal. drums. OILS - LUBRICATING NEUTRAL OILS (Conventionally Refined) HYDROCARBONS & POLYMERS DIVISION Designation SSU Viscosity 100F. Pour Point -- JF. 70/75(4.100 70-75 -50 100 0.100 95-105 -30 150&-100 140-160 -25 200 100 190-210 -15 300100 290-310 -10 500(4100 480-520 -5 750 0.100 730-770 0 1200*100 1150-1250 +15 90/95(4210 1450-1650 +25 2000*100 1900-2100 +25 t in tank cart and/or transports. Color ASTM Max. 2 2 2 3 3.5 4 45 45 5 5 GREASES LION AC TRACT ROLLER GREASE HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Semi-fluid. GENERAL INFORMATION: A stringy, tacky lubricant of a semi fluid consistency which is suitable for lubricating the roller bearings and teals in truck wheels, track idlers and aupport rollers. Exceeds specifications established by Allia-Chalmers Manufacturing Company. SHIPPING INFORMATION: Lubricating Greaae. 35-lb. paila. LION ALL WEATHER CHASSIS GREASE HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Buttery. GENERAL INFORMATION: A lubricant for use in the general lubrication of chaasia parts not requiring a special greaae. It is manufactured from viscous, high-quality oils and a special calcium base. It is highly adhesive, tacky and water proof. This product is made in both summer and winter grades. SHIPPING INFORMATION: Lubricating Grease. 400-lb., 120-lb. drums, 35-Ib. pails and 5-lb. containers. LION BARIUM 4-in-1 GREASE HYCROCARBONS \ POLYMERS DIVISION STANDARD FORM: Sliort-fii-er grease GENERAL INFORMATION; An a cant for use on wheel bearings, chain pumps. It is highly water-resiatant. a V>0F. This lubricant has the necessa ness to stay in place in universal jnu freedom from drippage. NI.Gl Grade SHIPPING INFORMATION: Lubricating Grease drume, 35-lb. pails. LION COTTON PICKER SPINDLE GREASE HYOROCARBONS & POLYMERS DIVISION STANDARD FORM: Semi-fluid GENERAL INFORMATION: A special heat-resistant lubricant Erodured especially for cotton picker spindles It has an extremely >w pour point, and will also provide superb lubricaium >it tugh temperatures. SHIPPING INFORMATION: Lubricating Grease 3'.-lb pails an.1 containers. LION MULTI-PURPOSE A. F. GREASE HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Buttery GENERAL INFORMATION: A lithium baae. multi-purpose grease for use on anti-friction bearings. It pump* readily even at winter temperatures, resists water washing and stands up in severest service. Maximum continuous usable temperatures 35(TF NLGI GRADES: fl and <2. SHIPPING INFORMATION: Lubricating Grease. 4<>n-lb. and 120-lb. drums, 35-Ib. pails. LION WHEEL BEARING GREASE HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Fibrous. GENERAL INFORMATION: A sodium-base greaae for use m wheel bearing* and universal joint* It provides high res mi am e in heat, pressure and moiature. and does not tend to melt and run out on brake linings. NLGI GRADE: *3. SHIPPING INFORMATION: Lubricating Grease 3'.-lb pail, and 5-lb. containers. OILS --LIGHT AROMATIC OILS HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: An unsaturated hydrocarbon raw material used in manufacturing petroleum resins and annual u * SHIPPING INFORMATION: Petroleum Naphtha and or Aro matic Concentrates. Railroad tank cars and tank tru< ks BURNER OIL HYDROCARBONS 8. POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: Used in oil-fired residenii.il he.,nog units. Msde in Grade* No. 1, 2 and 3. SHIPPING INFORMATION: Petroleum Distillate Fuel Oil not suitable for illuminating purposes. Railroad tank < ars irmsport trucks and barges, and pipe linee. BUTANE-PROPANE MIXTURE HYDROCARBONS 8i POLYMERS 0IVISI0N STANDARD FORM: Liquid GENERAL INFORMATION: A liquefied petroleum g..* ...... home heating and as a motor fuel m engines especially i 11 i1 use this fuel. SHIPPING INFORMATION: Liquefied Petroleum G..s I'.mg. ous placards applied). Railroad tank cars and transport trm o 0684958 37 TOWOLDMONOQ43041 DIESEL FUEL TRACTOR DISTILLATE HYDROCARBONS 8> POLYMERS DIVISION HYDROCARBONS St POLYMERS DIVISION STANDARD FORM: Liquid. STANDARD FORM: Liquid. .GENERAL INFORMATION: A product of petroleum refining for `uh u fuel in diaeel enginee. SHIPPING INFORMATION; Petroleum Pistillate Fuel Oil, not suitable for illuminating purposes. Railroad tank cars, transport trucks and barges, and pipe lines. ETHYLENE I GENERAL INFORMATION: A product of petroleum refining for general use b a fuel in internal combustion engines on tractors SHIPPING INFORMATION: Petroleum Distillate Fuel Oil not See Pege 34 suitable for illuminating purpoeea. (Dangerous placards applied j LIOTaNnkcars MOTORaud tank trucks. OILS HERBICIDAL OIL NO. 1 HYDROCARBONS & POLYMERS OIVISION -- LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: A post-emergence contact herbicide produced by carefully controlled petroleum refining. It is com pletely volatile and leavea no reaidue. It is non-corroaive and its USES: A aafe and economical herbicide for weed control in cotton and aoybeene. Appliod aa a spray. SHIPPING INFORMATION: Naphtha. Tank cars and tranjport HERBICIDAL OILS NOS. 6 & 7 HYDROCARBONS & POLYMERS OIVISION--LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: Non-eelective. general contact herbi cides produced by carefully controlled refining from a crude oil naturally high in aromatic compounds. They are alowly volatile and leava no permanently toxic or oily reeiduee when used at rec ommended rates. Kill only those plants on which they are actually sprayed. USES: For control of weeds and grasses on railroad rights-of-way, and wherever general contact herbicides are required. Applied aa a spray. SHIPPING INFORMATION: Petroleum Distillate Fuel Oil, not suitable for illuminating purposes. Tank cars. INK OIL HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A lightweight oil for mixing with inks in printing. SHIPPING INFORMATION: Petroleum Distillate Fuel Oil. not suitable (or illuminating purposes. Tank care and tank trucks. LION HDX MOTOR OIL HYOROCARBONS & POLYMERS DIVISION --LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: A motor oil with the oxidation atability, corrosion preventive propertiee and detergent-diaperaant characteristics neceeeary for use in both high-speed diaacl and Stsoline engines under heavy duty service conditions Exceeds r S rdnance Specification 2104A Sup. 1 and requirements for Ai'l Classifications MS-DG-DM. SAE GRADES: 10 through 50, inclusive. SHIPPING INFORMATION: Lubricating Oil 55-gal.; 5-gal cans; 24/1 qt. cans. MULTI-TEMP NATURALUBE MOTOR OIL HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A superior all-weather oil for auto mobile enginee providing an extra safety margin for protection under extremee of temperature, climate and other operating condi tion*. Naturelube Multi-Temp exceeda MIL-L-2104B performance level and is especially recommended for modern high-compreeaion enginee. It also meets M9 test sequences as established by auto motive manufacturers. It bas a high Viacoaity Index and it is highly desirable for use under heavy duty service conditions in modern automobiles. Meets API Classification MS and MS Teat sequence* SAE GRADES: 10W-30. SHIPPING INFORMATION: Lubricating Oil. 55-gal. drum*. 24/1- NATURALUBE AUTOMATIC TRANSMISSION FLUID KEROSENE HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A product of petroleum refining for uee aa fuel in oil-burning stoves and lampa, and in various internal combustion engines. SHIPPING INFORMATION) Refined Oil. Illuminating, and/or Kerosene. Railroad lank care, transport trucks or barges, and pipe line. PROPANE HYDROCARBONS fl. POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A Liquefied petroleum gas used for home heating. SHIPPING INFORMATION: Liquefied Petroleum Gaa. (Danger ous placards applied). Railroad Lank cars and transport trucks. PROPYLENE See Pege 34 RESIDUAL FUEL OIL HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A fuel oil for uee in firing furnaces and boilers on locomotives, steamships and in industrial plants; mads id grades No. 4, 5 and 6. SHIPPING INFORMATION: Petroleum Residual Fuel Oil. Tank care, tank trucks, and barges. HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A superior quality, fully guaranteed automatic transmission fluid, approved by Armour Iteeearch Foundation for use in all transmissions and applications requiring Type "A" Suffix "A". SHIPPING INFORMATION: Lubricating Oil. 55-gal. drums. 24/1- NATURALUBE EXTRA HEAVY DUTY MOTOR OIL HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: A newly developed motor oil to meet the exacting requirements for top performance of modern high rompreeeion automobile engine*. Its ability to remove powerdestroying engine deposits keeps in check the engine's octane re quirement increase, and reduces knock and pre-ignition. Its anti acid propertiee protect engine* against acid wear, and its high natural film strength protects againat friction wear. Its oxidation stability and detergent-dispereant characteristics, together with the characteristics described above, make it highly desirable for use under heavy duty service conditions of modern driving. Meets requirements for API Classifications MS-DG-DM and U. 8. Ord nance Specification MIL-L-2104B & MIL-L-2104A h MS Tret sequences. SAE GRADES; 10 through 50 inclusive. SHIPPING INFORMATION: Lubricating Oil. 55-gal drums: 5-gal. cans; cases: 24/1-quart cans. NATURALUBE MOTOR OIL HYDROCARBONS & POLYMERS OIVISION-UTERATURE AVAILABLE STANDARD FORM: Liquid. 38 0684959 4 TOWOLDMONOQ43042 rrtlli Hi ruf ^ ' GENERAL INFORMATION: A motor oil reinforced with special additive* for uae in internal combuation engines where operation condition* are more severe than in light duty. This oil has high oxidation liability and contains properties which tend to prevent bearing corrosion. Meets requirements for API Classification ML-MM. SAE GRADES: 10 through 50 inclusive SHIPPING INFORMATION: Lubricating Oil. 55-gal.; 5-gaJ. cana; cases: '-4/1-quart cana. NATURALUBE OUTBOARD MOTOR OIL HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A specially-selected straight run mineral oil produced without chemical detergent additivee and designed ae a superior lubricant for two-cycle engines. It may be used for outboards, chain sawe, power lawn mowers, power gener ator*. air-cooled motors, motor acootere and motor bike*. Its natural detergent action makes it a highly recommended oil for use in two-cycle engine*. SHIPPING INFORMATION: Lubricating Oil. 55-gal. drums, 24/1quart cans, and 48/8 oz. cans. NATURALUBE OUTBOARD MOTOR OIL NEW IMPROVED HYDROCARBONS 8. POLYMERS DIVISION New Improved Lion Notumlub* Outboard Motor Oil is developed from the famous Smackover crude oil and fortified with superior additive*. The development of this new outboard oil is an important etep forward for owners of two cycle engines of 10 horsepower or more. It meets the rigid teet requirements set by Homolite Motor Gener ators. McCullough Chain Saws and the Outboard Boating Club of America. In addition. Scott's and Johnson's 75 horsepower endur ance test requirements for quality and stability are surpassed by this oil. This new product, recommended for use in motors of 10 horse power and larger, will increase plug life, reduce pre-ignition, ring licking and port plugging. It mizea readily with any gasoline form ing a stable oil-fuel mixture to assure proper lubrication during operation. Owner* of chain saw*, lawn mowers and other two-cycle engines will benefit from using New Improved Lion Outboard Oil. This product comes in a new attractive one-quart plastic bottle. SUPER DUTY NATURALUBE MOTOR OIL HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: A motor oil for diesel and heavy duty uae to meet specification requirements under the most demand ing condition*, especially in engine* usmg high sulfur content fuel*. MmU requirement* for Caterpillar Series 3 lubricants and for API Classifications DM-DS. Meets U. S. Ordnance Specification MIL-L-45199 i MS Test sequence*. SAE GRADES: 10 through 40 inclusive. SHIPPING INFORMATION: Lubricating Oil. 55-gal. drums: snd 5-gal. cans; 24/1 qt. cans. TIGER MOTOR OIL HYDROCARBONS & POLYMERS DIVISION 8TANDARD FORM: Liquid. GENERAL INFORMATION: A straight mineral motor oil for lubrication of engine* in light duty service. Meets requirement* for API Classification* ML-MM. SAE GRADES: 10 through 50, inclusive. SHIPPING INFORMATION: Lubricating Oil. 55-gal. drums; cu; 24/1-quart cans. LION* ASPHALT PRODUCTS INDUSTRIAL ASPHALTS LION' 5A60 PRIMER HYDROCARBONS & POLYMERS 0IVISI0N -- LITERATURE AVAILABLE GENERAL INFORMATION: Lion 5A60 Primer is a fast drying asphalt primer for use in conjunction with R-120-A Asphalt, it leave* a film of "live" asphalt which flexes readily with tho hot coating to form a durable coating-to-metal bond. TYPICAL PROPERTIES: Flash Point. T O C., F Viacoeity. Saybolt Furoi at 77F.. sec Weight, lb*./gal at 60F Solid* Content, % by weight SHIPPING INFORMATION: Petroleut paint. alaiD or varnish). 5-gal paila; 55-ga LION* ASBESTOS ASPHALT ROOF COATING HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: Asbestos roof matin* is a mixture of high-grade petroleum asphalt ami petroleum solvenl lo which selected asbestos (rock) fiber ha* been added The aaphalt from which this product is made does not contain coal tar. free carbon, or cracked residues. The material n in liquid form and require* no heating. This product complies with Federal Specification .vi-K tM USES: This material ia recommended ae a heavy duly finish for added protection on amooth-aurfaced roll roofing or built-up ,-*>(. for preserving metal roofs, and for renewing old. dry vnoothaurfaced roll roofing. The high asbestos content hermit* the waling of small crack*, joint*, seam* and nail holes, am! mcreuaea the fire proofing qualities of the roof Higher resistance to ihe drying out action of the aun assure* minimum expense for upkeep Kxcellent results are obtained in weatherproofing exposed foundaiion*, -cm. Crete surfaces exposed to moisture, and in nampprootmg structures both above and below grade. SHIPPING INFORMATION: Roofing Coating 55 gal drum. 5-gal. pails; 1-gal. pails (6 in case) LION* ASPHALT PLASTIC ROOFING CEMENT HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Heavy liquid GENERAL INFORMATION: This material is carefully cum pounded from high-grade petroleum asphalt, naphthas, especially treated mineral fillers, and a.be*to* fiber*. It adheres tightly to metal, felt, wood, glass snd concrete surfaces It also has the prop, arty of being able to cover end adhere to wet or dry metal and saturated roofing-felt surface*. Manufactured under C S Patent No. 2,393,774. This product complies with Federal Specification SS-C-163. USES: This material ia recommended for repair nf break*, cracks and holes in all type* of roofs, and for sealing and waterproofing around chimneys, altylighta, valley*, vent Pipes and haae and cap flashing*. It also is useful for sealing the wall* of boiler setting* and for dampproofing interior and exterior wall*, both above ami below grade, where heavy film thickness is desirable for maximum pro tection. Important farm uae* includs the repair of watering tanks and as a pruning cement. SHIPPING INFORMATION: Roofing Cement. 500-lb drum*. 50-lb. paila; 10-lb. pails (6 in case); 5-lb. pail* (12 in case:; J-y Hi pails (18 in case); 1-lb. pails (36 in case). LION* BLIND NAILING ROOFING CEMENT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. GENERAL INFORMATION: A compound ofhigh grade petroleum aaphalt. petroleum solvent and selected asheato* frocki fila-r It eliminates the need of nailing the lower edge of rull routing and avoids the leak hazard created by nail holes The completed mli provide* a roof with much longer life. Important additional uae* of this extremely durable and adhesive material include ihe i eimuumg of patches when damaged roof* are being repaired. USES: This cement is especially recommended for uae m applying selvage-edge roll roofing It also is highly recommended for applying felt which nss not been saturated. SHIPPING INFORMATION: Roofing Cement 55-gal drum* 5-gal. pails; 1-gal. pails. LION* BONDITE ADHESIVE ASPHALT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Solid, liquefied by heating. GENERAL INFORMATION: This product ia an effective asphalt adhesive designed especially for bonding wooden him h rlunrmg and wooden screeds to concrete slab foundations easily Ami pm kly It is flexible enough to allow for expansion and contraction -luring temperature changes, yet holds flooring and screed* lirmly m place without fear of disbonding Borufife Aaphalt may he ipplu-,1 at ambient temperatures from 45 to 105 F It is intend-',! (or -u dry concrete slabi above grade which have been poured -,. r * moisture vapor barrier. SHIPPING INFORMATION: Petroleum Aaphalt ..the, -han paint, atain or varnish). 5-gal. pails 0684960 39 TOWOLDMONOQ43043 r LION* COLD PROCESS ASPHALT HYDROCARBONS 8. POLYMERS DIVISION STANDARD FORM: Liquid. GENERAL INFORMATION: A liquid material prepared from a high-grade asphalt with a petroleum solvent. It is easier to handle than the soiia type because it ia already prepared and ready for application by brush or apray. No heating, thinning, special equip ment or skilled labor is necessary. Lion Asphalt Hoof Coating does not contain coal tar, free carbon or cracked residues. It resists brittleness and cracking in cold weather and maintains firm body m hot weather. ILSES: This product ia recommended for added protection as a surface finish on smooth-surfaced roll roofing or on built-up roofs: for preserving metal roofs, for renewing old, dry, smooth-surfaced roll roofing. SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain or varmah). 55-gal. drums; 5-gal. pails; 1-gal pails LION* COLD PROCESS LAP ASPHALT HYDROCARBONS 8. POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid GENERAL INFORMATION: This quick-setting liquid asphalt ia especially compounded for use as an adhesive in construction of huilt-up roofing with cold process fella. IISES: Cold Process Cement eliminates the necessity of using nails on the lower edge of roll roofing when applied shingle style. Only the upper edge of the roofing should be nailed. Not to be used on non-Mlursted fell, SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain or varnish). 55-gal. drums; 5-gal. pails and 1-gal. pails LION* DEAD LEVEL ROOFING ASPHALT Pattoitum Asphalt HYDROCARBONS 8i POLYMERS DIVISION STANDARD FORM: Solid. GENERAL INFORMATION: A roofing asphalt developed espe cially for use on flat roofs with poor drainage. SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain or varnish). 400-lb. metal drums, l&O-lb. metal drums, and 100-lb. fiber cartons. LION* DRY-KILN MASTIC HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Heavy liquid. GENERAL INFORMATION: Used for coating interior of dry kilna to reduce heat loss and to protect wood, mortar and metal surfaces against corrosion incident to the curing of lumber. SHIPPING INFORMATION: Roofing Cement. 500-]b. metal LION* E-120 A ASPHALT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: Lion E-120-A Asphalt ia a pipe cost ing having certain physical characteristics not obtainable by con ventional processing. Compounded from a specially processed asphalt and an inert, finely divided filler, to produce a coating which has, in addition to properties of Lion E-120, improved reeietnnre to deformation, a faster set-up time, and increased resistance to the effecta of cathodic protection. It applies smoothly and with stands mechanical stresses during costing and handling. It provides excellent resistance to aaf at high temperatures end retains its flexibility in low temperatures, use SA6Q Primer in conjunction TYPICAL PROPERTIES: . . above F.. .Softening Point (R4B), F-. Penetration st 77F., l00g/5 sec , 1 /10mm. . . Penetration at 32F., 200g./60 a c., 1 /10mm. . Penetration at 115F.. 50g./5 ae . 1 /10mm. . |\ Penetration at 150F., 50g./5 ae . 1 /10mm. . Viscosity, Saybolt Furol at 375F., a Ash (Mineral Filler) % by weight... Settlement Ratio............. . 1.02 High Temp. Sag Teat at 160F., 24 hn None lx>w Temp. Crack Teet. 6 hrs. at 0F.. Peel Test. 60"F. to 160F. . No Crack No Peel Break Test at 86F., 1' Mandrill No Break Deformation Test at 85F., 100 hrs., 2 PSI, mils. . Deformation Test at 115F.. 6 hrs., 2 PSI, mils.. Impact Test at 32F., 2" dia. steel hall from I ft. Water Aheorption, 35 weeka. % by weight . . Resistivity, ohm-cm., alxive . . ... 1 X10" Resistivity, after 35 weeks immersion, ohm-cm, above. 1 XTO" Voltage Breakdown, volts per mil. above .. 1000 Cathodic Disbonding (when used with 5A60 Primer), 1.50 volts for 7 day*, square inch** .. . . SHIPPING INFORMATION: Pipe Coating or Moisture or Con densation or Rust Preventive. 120-lb. cartons. . |n , ^ i LION* E-120 HL ASPHALT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABl E GENERAL INFORMATION: Lion E-120-HI. is sn asphalt r daily designed for protection of underground pipelines transmit hot gas or oil. E-120-HL has a markedly high degree of resist to puncture, sod stress and high temperature distortion A degree of stsbility gives excellent retention of physical pmpe during application and service. TYPICAL PROPERTIES: Weight, Ibe./gal. at 60F.. . Flash Point, C.O.C., above F. Softening Point (R&B), F.. . Penetration at 77F.. 100 g./5 see., 1/10 mm. Penetration at 32F , 200 g.'`60 sec.. 1 TO mrn. Penetration at 115F., 50 g./5 sec., ldO mrn. Penetration at 13SF., 50 g./5 sec., 1 TO mrn. Penetration at 150F., 50 g./5 aec., 1 TO mm Penetration at 165F., 50 g./5 aec., 1/10 mm. Viscosity at 425F., cps. Viscosity at 4T5F., cp*. . Ash, Wt. %..................... Settlement Ratio at 425F.. . High Temperature Sag Teat (180F for 24 hours) Low Temperature Crack Test, 0F. for 6 hours Deformation Test at 115F.. 6 hr*., 2 PSI, mils Deformation Teat at ISO'F., 6 hrs., 2 PSI, mils Impact Test at 32F., 2' dia. steel hall from I ft. Use E-120-HI- Primer in conjunction with E-I20-UI. 10 0 600 21 30 H50 1135 l'o:t No Sr SHIPPING INFORMATION: Pine Coating or moisture or denaation or rust preventive. 120-lb. cartons. LION* E-120 HL PRIMER HYDROCARBONS 8< POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: Lion E-120-HI. Primsr is formu lated specifically for use with E-120-HL Coating It dries quickly to form a tough coating-to-mstsl bond which maintains its dura bility even St elevated temperatures. E-120-ttl. has excellent resistance to disbonding from structures under cathodic protection. Coverage rates of E-/20-HL Primer will be about 400-600 square feet per gallon. TYPICAL PROPERTIES: Flash Point, T.O.C.. F......... Viscosity, Saybolt Furol at 77F.. ssc. Weight. Ibs./gal. at 60F.................. Soliae Content, % by weight . 100 .35 75 47 SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain, or varnish). 5 gal. pails; 55 gal. druma. LION* METAL COATING NO. 3 Roof Coating HYDROCARBONS 8> POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid, manufactured in three grades: light, medium and heavy. GENERAL INFORMATION; A black, semi-glossy, dense, highly impermeable, adhesive film designed to protect metals from cor rosive influences. The composition contains high-grade petroleum asphalt, asbestos fiber, specially treated mineral fillers, and a small content of solvent to permit ready application at ordinary atmos pheric temperatures. Films of Coating No. 3 offer lasting protection, do not crack and peel on exposure to weather, and have high resist ance to abrasion and impact. SPECIFICATIONS: Requirement Light (Brush) "Medium (Spray) Heavy (Trowel) Weight--lbs. per gal. at 60F........... Solids content, % Mineral filler (Ash), % . . . Flash point, Pensky- Martent, F.................. Cracking or disbonding at 20F.... . Time to dry to touch, 1 /16* film, hrs. . Time to dry firm, 1/16' film. max. hrs............ Lineal shrinkage, % . . Flow of coating at 325F., inches............. Corrosion of steal, copper, aluminum. Salt spray test. 1/16' film, protection of steel panel, min., hrs, . Outdoor weathering performance.................. Fire resistance of cured film. 6' Bunsen flame applied for 3 min.. . Vapor transmission, wet cup. grains per eq. ft. per hr,. 1film, 0-50% R.H. at 90F............... 7.8 65 15 102 None 1.5 24 18 0.0 None 8.3 68 20 102 None 15 24 15 00 None ft 75 25 102 None 15 24 12 00 None 500 500 500 Excellent Excellent. No falling asphalt drop'eis Fire duration less than one minute after (lame removed. 0.01 0 01 002 Can also be brushed at temperatures of 75F. or above. : Made under the process of U. S. Patent No 2,393,774 ) 0664961 TOWOLDMONOQ43044 USES: This product is used on pipes and tanks to be buried under ground and as a protective dim on bridges, butane tanks, metal culverts, gas bolder*, metal roofs, gutters, hoppers, pipes, pontoons, railings and, in general, all metal surfaces where a tough Aim is needed to protect from corrosion and rust. Sound deadening prop erties also are provided, as when used on the interior of hulls of metal boats. SHIPPING INFORMATION: Roofing Coating 55-gal. drum*; 5-gal. pail*. LION NOKORODE BRUSH ASPHALT HYDROCARBONS & POLYMERS DIVISION - LITERATURE AVAILABLE GENERAL INFORMATION: A brush-applied heavy asphalt cut back for sealing laps and joint* on coverings for insulations, and as a brush-applied vapor seal SHIPPING INFORMATION: Roofing Cement. 5-gal. pails; 55-gal. drums. LION NOKORODE BUTTER ASPHALT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: Lion Nokorode Butter Asphalt is a unique compound made possible by combining a hydrocarbon polymer with a special asphalt. Butter Asphalt is a 100% non volatile compound which has a softening point above 200F. and retains adherence down to -U0"F. Some of the various uses of Butter Asphalt are as an insulation adhesive (particularly useful for plastic foam insulations), joint compound, bedding compound and ship joint, caulking compound, etc. Applied by trowel at ambient temperatures, sprayable at elevated temperatures. TYPICAL PROPERTIES: Flash Point, C. 0. C. F.. Min................ Pounds per gallon at 770F........ .. Softening Point (R&B), *'F.......................... Penetration at 77F., 100 gins., 5 sec., mm Shrinkage................................. . Corrosion to steel, copper, aluminium Permeability. Perm-inch ... . Bend Teat; '* thick film 1' mandrel, 180 Bend; good to F.. . . ... . Suggested Service Temperature Range, F. Butter Test........................................ .. Resistance to oils, greasee, and solvents . 300 + .N 00027 -20 -110 to +140 Pass Not resistant SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain or varnish). 5-gal. pails and 55-gal. drums. LION NOKORODE CAR CEMENT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A sealing compound for use in sealins joints and minor opening*, the uDderframe, and the roof of railroad car*. This cement air-driea to a coating which seats out moisture, chemicals and fumes to prevent corrosion. SHIPPING INFORMATION: Vehicle body sealer or sound deadener. 5-gal. paila; 55-gal. drums. LION NOKORODE CHASSIS BLACK HYDROCARBONS & POLYMERS DIVISION GENERAL INFORMATION: Lion Nokorode Chavis Black is an asphalt base coating supplied as a concentrate. Before using it should be diluted by adding approximately 60 parte by volume mineral spirits to 100 parts by volume Chassis Black. The resulting material will give a tough, durable coating which will air dry in 4 to 10 minutes. The drying time will depend on the degree of dilution and the grade of mineral spirits used. Mineral spirits with a boiling range of 240 to 315F. is preferred. TYPICAL PROPERTIES OF CHASSIS BLACK AS RECEIVED: Flash. Tag open cup, F................................... .75 + Viscosity, Saybolt Fural % 1226F.......................... 66 Solids, weight %....................................................... 54 Pound* per gallon at 60F., approx............................. 7.4 TYPICAL PROPERTIES AFTER DILUTION: Viscosity, Saybolt Universal sec., @ 77F... .. .115 Solid*, weight %....................................................... 35 Consistency.................................... Dry time, minutes............................................ Pound* per gallon at 60F., approx................ Spray or Brush . . 4 to 10 . 6.9 USES: Applied to paint frames, radiator*, spring*, axles and Aat metal parts of automobiles, buses, etc., to give them a pleasing appearance and prevent corrosion. SHIPPING INFORMATION: Liquid Petroleum Asphalt. 5-gal. paila; 55-gal. drums; bulk quantities. LION NOKORODE COACH BUILDERS SOUND DEADENER HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A semi-liquid material composed of selected asphalts, petroleum solvents, fillers and additives. Develop ed especially for uee on aide, roof and floor panel* of large commercial and passenger vehicles where the panels are subject to more flexing (ban is usual in automobiles or cabinets. Application prevent* noises caused by vibration, and corrosion preventive properties protect metal surfaces. SHIPPING INFORMATION: Vehicle Body Sealer or Sound Deadener. 5-gal. pails; 55-gal. drum*. LION NOKORODE COACH BUILDERS UNDERCOATING HYDROCARBONS & POLYMERS DIVISION LITERATURE Avah-VIlE GENERAL INFORMATION: A semi-liquid m,iien.il whi.-h dr-,-a to form a tough film. When applied to the underbodv -d > on.mvr, . d and passenger vehicle*, it protect* against moisture n.l,r. ,ni chemicals, and preventa points of corrosion from Ix-mg ti.u'.,; t.v abrasion due to flying gravel. Adds years to the life of the veto- and reduces maintenance costs Much more flexible for large ,imn than regular underbody coating. SHIPPING INFORMATION: Vehicle Body Sealer or d.,,,nd Deadener. 5-gal. pails, 55-gal drums LION NOKORODE CONSTRUCTION ASPHALTS HYDROCARBONS & POLYMERS DIVISION- LITERATURE AVAILABLE GENERAL INFORMATION: Hot applied asphalt for hot .emng bonding and vapor sealing of low temperature uiaul.n ions M-e'a ASTM specification#. GRADES: Grade B. \45-ir>5'F softening point, tii.ote i\ l-W200F. softening point. SHIPPING INFORMATION: Petroleum Asphalt o.ther (ban pai.it stain of varnish). 100-lb cartons LION NOKORODE D-41 ASPHALT HYDROCARBONS (a POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A primer for surfaces j.rmr to the application of Lion Nokorode Construction Asphalts Meets govern ment and ASTM aepcificationa. SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain or varnish). 55-gal. drums, 5-gal. pails. LION NOKORODE E KOTE Petroleum Asphett HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A hot applied asphaltic dating fnr water-front and underwater service Made from an isph.ili base and mineral filler which give# eieellent protection to metal surf.ire* under aevere conditions of service. Recommended fur ippu. atmn to ballast tanks, penstocks, steel piers, metal surfaces in lin k constructions, and general water-front application. SHIPPING INFORMATION! Petroleum Asphalt hither than paint, stain or varnish). 120-lb. cartons. LION NOKORODE GOVERNMENT RUST PREVENTIVES HYDROCARBONS & POLYMERS 0IVISION --LITERATURE AVAILABLE GENERAL INFORMATION: Variou* types of materials tured to meet exacting Government standards I bese have been tested and approved by the Government labor meeting their specification* and Certificate* of Compl supplied covering tame. Following is a list giving the Lion Nokorode designation Government Specification for which it is approved Lion Nokorode Designation Government Spe.i Crate Top Coaling Army Cote 827 Army Cote 827 E-Oll Mii.+MirwA ~i MII.-C-l l :>>a. i MIL-C-16173B t; Mll.-C-ltil 73B i ; JAN-IM02 Mil. AXS-1827 .Amen, Fed. Spec TT ( ' M1L-C-3254. I +p. SHIPPING INFORMATION: 5-gal paila; 55-gal drum* LION NOKORODE K KOTE Rooting Cement HYDROCARBONS & POLYMERS DIVISION-LITERATURE A1. diLASLE GENERAL INFORMATION: An asphalt base, mam, .......... .. containing a high volume content of screened ground .-urn .mil ,i small amount of long fiber asbestos. Applied wuh 4pr.1v 'impment or trowel K Kote cures to a tough and abrasion-resisting 'dm with excellent insulating and weather-and-vspor barrier pmom u-* K Kote, usually applied by spray, has a pleasing appear in,.- * 1 h the cork particle* uniformly distributed throughout to ti-.fu... the thermal conductivity of the film. A ' " film of K Kote . -mp in-d to a bare steel surface can reduce the lose of heat up to >> < ' .1 - tie film act* a* a weather and vapor barrier to pmte, 1 .1 driving surfaces from condensation, corrosion and weathering i-n-n .-n- - nut sound deadening value ia given to ducts, walla ep 1 1 - mug the film becomes fire resistant and doe* not support . ..o,i.,.m,u> 0684962 41 TOWOLDMONOQ43045 4 TYPICAL PROPERTIES AND PERFORMANCE: Medium Heavy Application range* for K Koto: __ . . Spray application.................. 60-l00F. 80M00F. Trowel application.................... -- 60M00F. Flash. Tag Open Cup,'F........... 100+ 100 4 Pounds per Gallon at 60eF., approx.. . . 6.8 6.7 * Solids, by wl., %.......................... 60 + 60 + Approx. Solids, by vol., %......................... 68 Sag of sprayed W ' film, lees than inches. 't 70 Sag of iprayed k ' film, lees than, inches -- Vi Dry to touch. '* spray coat, minute* 45 Dry firm, 1 'spray coat, hours ........ 36 45 36 Dry to touch. Vi * spray coat, minute*. -- 60 Dry firm. Vi * spray coat, hours.... - 84 Approximate volume of cork In cured film, %....................................... Film Shrinkage on curing, % . . . 53 29 55 25 Water vapor permeability at 90F., wet cup spray coat: Grams per 100 *q. in. per 24 hr*., ti * film, 0-50% R.H............... Grains per sq. ft. per hour, 0.025 0.03 t< * film, 0-50% R.H........................... 0.020 0.025 Perm-Inch (grain* per *q. ft.-hr.-inch Hg-inch thickness) ................................ Fire resistance of cured film, 6' 0.007 0.008 Bunsen Blame applied for 3 minute*.............................. ............... Excellent. No falling of asphalt droplet*. Fire dura tion leas than one minute after flame is removed. Corrosion of steel, copper, aluminum. . None None Reeiatance to abrasion by sandblast. . . Excellent Excellent Outdoor Weathering performance......... Excellent Excellent Reeiatance to solutions of acids, Vi ' cured film Immeraed for 60 days at room temperature, 10% HCt, 10% HiSOi, and 10% . 30% and 85% HiPO<...................................No appreciable attack. Not recommended for nitric acid eolution* or itrong aolutione of acetic acid. Reeiatance to solution! of salt*, Vi ' cured film Immersed for 60 days at room temperature, 45% Ammonium Nitrate and saturated solution of Ammonium Sulfate............................. No appreciable attack Reeiatance to alkaliee..............................Not recommended In atrong alkaline solutions unless topcoated with Lion Noko- rode Sea) Kote. Reeiatance to oils, greaaee, eolvent*.... Not Not reaiatant reeietant Flow of cured Vi ' film on metal panel, vertical at 325s F..................... None None Temperature range of cured film.......... -40F. to 276"F. THERMAL CONDUCTIVITY OF LION KOKORODE K ROTES ANDVARIOUS MATERIALS AT ROOM TEMPERATURE- BTU PER HR.- SQ. rr.--*F- INCH Lion Nokorode K Kote#, cured film (Lowdr value for fluffy spray application, higher value for dense trowel application)..................................... Cord Board................................................................ Fiber Insulating Board............................................ Mineral Wool............................................................ Cellular Glass (9 lba./cu. ft.).................................. Yellow Pine............................................................... Aabeatoa Fiber (36 lba./cu. ft. .)............................ Asphalt...................................................................... Dry Sand................................................................... 8leel........................................................................... Aluminum.................................................................. Copper....................................................................... USES: All eurfacee where a combination of Insulation vapor, and weather protection, and sound-deadening value* are of benefit, can be economically covered in od# application. SHIPPING INFORMATION: Roofing Cement, 4.8-gel. pails; 51gal. drums. lion n5k5r5de low temp Roofing Camant HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A catalytic asphalt base (U.S. Patent No. 2,450,766) formulation containing selected oil* and mineral filler* for use as a bedding and joint compound for low temperature insulation. It cure* to a black, non-tacky but perman ently soft compound with a firm shrinkage in thickness of approx. 14% . Low Temp, is an excellent seal to decrease transmission of vapors through joint* and layers of insulation to prevent build-up of destructive moisture beneath the insulation. Plasticity of the coating la retained at low temperature*. This la an excellent protect ive coating to prevent corroeion of surfaces by industrial atmoa pheraa, but due to It* aoftnea*. Low Temp i* not recommended ax an outside coating axcept where exposed at joints and teams. This material can be applied by aliff brush or trowel within a temperature range of 80VU0eF. and csd be sprayed with industrial type of mastic spray equipment. Compound has satisfactory behavior over the wide tempereture range from minus 100F. to plus 200F. TYPICAL PROPERTIES AND PERFORMANCE: Flash, Peosky-Martens Closed Teeter, tfF..................................... 100 + Pounds per gallon at 60F., approx...........................................10.3 Solids by wl.. %............................ 82 + - Sag at 77F. of freshly troweled k ' film on cellular elss*. inches Lee* than H Dry to touch k ' film, days 2 Dry firm, k " film............... Non-drying Remains soft and Film shrinkage. %.............. Corrosion of steel, copper, 14 Outdoor weathering performance......... .. Satisfactory, but because of softness not recommended as outside coating. Water vapor permeability at 90F.. wet cup, trowel coat: Crams per 100 sq. in. per 24 hours, K ' cured film, 0-50% R.H......................... 0.025 Grains per sq. ft per hour, 1 *' cured film, 0-50% R.H.. 0.020 Perm-inch (grain* per sq. ft.-hr.-inch Hg-inch thickness) ... ................ 0.004 Resistance to oils, greases, solvents....................................... Not resistant Resistance to 10% and 30% NaOH................................... No attack on Resistance to 10% HCI, 10% HiSO,. and 10% H:PO............. Not resistant Salt fog resistance, film, complete protection of steel panels, min...................... . 500 hrs. Flow of cured Vj ' film at 200aF............................................ None Low temperature test, k ' coating cured on cellular glass block and through temperature cycle of +77*F.. -10OF., +77'F,, - 100eF.. + 77F...........................................No cracking or disbonding of coating or fracture of bit <k 9ug^eeted temperatui range coating.............. COVERAGE REQUIREMENTS - 100eF. to +200*F. ____ ,. ... jf block: Site 2* x 12* x 18'.............................................2k gal. Size 3' x 12' 18'.............................................3H gat As joint compound, k' x 2' joint*: . Per 100 lineal feet.............................................. Ik gal. SHIPPING INFORMATION: Roofing Cement 5-gal pails, 55-gal LION NOKOrSDE ROOF PERM Roof Coating HYDROCARBONS & POLYMERS DIVISION - LITERATURE AVAILABLE GENERAL INFORMATION: This product is made from asphalt* which have the ability to expand and contract with roof decks snd buildings even after years of weathering. It has a unique breathing action which allow# moisture vapor to eeeape and, at the same lime, prevents liquid water from entering. Little maintenance is needed other than regular inspection. It is easily applied by brush, spray or screed for new roofs or excellent for repairing old roofs Thu product is available in a Fire Retardant Grade for added safety SHIPPING INFORMATION: Roofing Coating. 5-gal pails; 55-gal LION NSkSrQDE ROOF SEAL Roof Coating HYDR0CAR80NS 4 POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A triple purpose eolvent cut back asphalt base mastic with great adhesive strength, outstanding weathering qualities and virtual impermeability to moisture No top cover!* needed for this product. It will not support combustion in its cured state. It can be applied by epray. bruah or screed Available in a Fire Retardant Grade for greater safety. SHIPPING INFORMATION: Roofing Coating, 5-ga! pails; 55-gal. LION n0k5r5de seam and backing CEMENT HYDROCARBONS 4 POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A trowel-applied, mineral filled asphalt base backing cement for use on maaonry and concrete wall* in construction of cold chamber* and for filling joints, seams, snd SHIPPING INFORMATION: Roofing Cement. 60-lb pails; 550-lb 0684963 TOWOLDMONOQ43046 LION n5k5rode seal kote Hooting Cement HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: Solvent cutbacks of a selected asphalt base cpntaininf the proper proportions of asbestos, and other mineral fillers to cure to a highly weatherproof, tough and adherent film upon the evaporation of the solvent. Seal Kotes are applied as vapor seala over insulation and to various surfaces, cuch as metal and masonry areas, to protect from moisture and atmospheric corrosion which (especially in industrial areas! is accelerated hy various dust*, fumes and fogs of corrosive chemicals The lough and flexible film is highly impermeable and offers a high degree of protec tion under conditions of total or intermittent water immersion. Available in brush, spray, and heavy grades. TYPICAL PROPERTIES AND PERFORMANCE: Grade Light Medium Heavy Application by................. Bruali Application Temp............ 50-120F. Spray or Bruah Spray 60-120'F. Bruah 80-120F. Trowel or Caulking 50-110^ (Can be sprayed if above Fiash-Penaky-Marlens, ^^ P-. 100 100 100 Bolide, %, min.................. 65 68 75 Corrosion of etocl, copper, aluminum........ None None None LlnesJ shrinkage, % , mas................................ 20 20 15 Decrease In Film Thickness on Curing, %................................... 35 35 30 Flow of cured film at 326F. ................................ None None None Approximate weight, Ibs./gal. at 60F........... 7.8 8.6 8.8 Dry to touch, film, hrs.. max....................... 2.0 2.0 2.0 Dry firm Ifl* film, bra., ran................................ 24 24 24 Salt fog resistance, film, comnlete pro tection or steel panel. hrs.. win........................ 500 . 600 600 Resistance to abrasion by sandblast.................... Excellent Excellent Excellent Cracking or disbonding of cured film on steel panels, rapid temp, change from 140'F. to - 60F.............. None None None Outdoor weathering performance.................... Excellent Excellent Excellent Water Vapor permea bility at 90F., Wet Cup: Grama per 100 eq. In. per 24 hrs , Vi' cured film. 0-60% R.H................................ 0.011 0.012 0.016 Grains per eq. ft. per bour, Vi' cured film. 0-60% R.H....... 0.010 0.011 0.016 Perm-Inch (grain per H. ft.-hr.-inch l-lnch thlckneea) 0.0016 0.0018 0.0023 Thermal conductivity, estimated of cured film............................ 1.7 BTU/hr.-eq. ft.F..Inch Fire resistance of cured film, 6* Bunsen flame ap plied for 3 min...... Excellent, No felling of asphalt drop lets. Fire duration lees than one minutes after flame Is removed. Resistance to solutions of acid, 60 day Im mersion of steel panels coated with film.........................No appreciable attack, blistering or hardening of coating or corrosion of panels by 10% HCI. 10% HiSO., and 10% , 30% and 85% solutions of phos pborlc acids. Not recommended for nitric acid solutions. Resistance to solutions of alkalies end salts, 60 day immersion of steel panels coated with *4' film................ No appreciable attack, blistering or hardening of coating or corrosion of panels by solutions of 10% and 30% NaOH. 45% ammonium nitrate, and aaturated solution of ammonium sulfate. Resistance to olle, grease*, solvents...........Poor. Not recommended for application in locations where exposed to solvents of asphalt. USES: Metal buildings, metal roofs, barges, pontoons, bridge structures, concrete siloe, storage tanks, tank cars and Industrial piping are but s few of the structures being protected from corroeion end weathering. Also an excellent vapor seal for all types of insula tion. SHIPPING INFORMATION; Roofing Cement. 5-gat pails: 55-gal drums. li5n nSkorode seal kote- Seeling Compound No flesh end Heguler fife HeUrdent Qredes HYDROCARBONS & POLYMERS DIVISION TYPICAL PROPERTIES AND PERFORMANCE: Lion Nokorudt Seal Kote Fire-Retardant (No Flash) I ir. $ Fire r 50-i20sF. 50- 120F (Brush) (Can he 80- sprayed 1209F.) above 90F.) Tai^open cup. No Flash No Flash Solids. % Min............. . 64 67 Corrosion to steel. copper, aluminum. . Decrease in film None None thickness on curing. Spray 50-120'F (Brush 10.2 Dry to touch, films, hrs.. max.. . Dry to firm, >4* film, hrs , max. .. . Salt fog resistance. Hi* cured film, complete protection of steel panet, hrs., Resistance to 500 abrasion by sandblast................... Excellent Cracking or dis bonding of cured film on steel panel, rapid temp, change from 140F. to-60F...................... None Outdoor weather performance.............. Excellent Water vapor perme ability at B0F,, wet cup: Grams per 100 eq. in. per Z4 hrs., I <' cured film, 0-50% R.H............................ 0.019 Grains per sq. ft. per hr., cured Blm. 0-50% R.H....... 0.018 Perm-Inch (grain 10.0 500 Excellent None Excellent 0023 0.022 500 Excell, Non, Excell, 0021 0 02H fcg-inch thickneaa}... 0.0031 Thermal conduc tivity, eetimated of cured film, BTU/hr.-aq. ft., Fi, in............................ 1.7 Fire Retardant Propertiea: Uncured film............. Excellent Cured film................. Excellent 0.0036 0 00:)6 1.7 Excellent I Excellent Ei. lion nSkSrSde sp asphalt Petroleum Asphett HYDROCARBONS & POLYMERS DIVISION-LITERATuRE available GENERAL INFORMATION: A spray or brush ppi,,.,| .,.,,h*!leotvent blend. A primer for porous surface* prior m 11... <[.|,|i< mion of Lion Nokorode Seal Kote*. Seal Perm. K Kmc u,,t 1 Omp. Also an excellent black costing with good hiding n,,,,r LION nSk5r5de* seal perm Booting Cement HYDROCARBONS & POLYMERS DIVISION-LlTERATu GENERAL INFORMATION: An asphalt plastic ........ breathing type of weatherproof barrier over ><,<>, insulation, walls and other area* Particular pr i--r,. Perm permit moisture vapor from insulation or a through the cured film, as might be required by o. action or by temperature increase, but liquid m.ii.t . , This coating function* at an excellent weather him. highly desirable film propertiee, forming a t.np, abrasion and weather-resistant covering wnirh is : , This coating is not an emulaion. and unlike ern,,.-, ,,transmitted through the cured film is in vapor '..tn, soluble salts are not wicked to the surface in , * staining. Seal Perm is available in spray and tr.oM-i Also available in Fire Retardant Grade* 0684964 43 TOWOLDMONOQ43047 Temp. Range of Coating for Application . Flash, Tag Open Cup. f. . Pounds per Gal. ai 60'F,, appro*.. . Solid., by Weight. Decrease in Film Thickness on Curing. . Lion Nokorodt ScaI Perm Spray Trowel Lion Nokorodt Seal Perm. Fire Retardant Spray Trowel 100F. 100 -i 100aF. 100F. No Flash No Flash 33% 28% Film............. 0 97 Thermal Conduc tivity of Cured Film, fat'd,. BTU per hr.-aq. ft.lF.-lnch......................... 1.6 Sag of Sprayod ' %' Film at 77F. ............ None Dry to Touch. 1' coat, houra.................... 1 Dry Firm, <i" coat, houra................... 24 Corroalon of aleot, cop|>cr, or aluminum................... None ReeiMance to abrasion by aandbla.t................... Excellent Excellent Outdoor weathering performance..............Excellent Excellent Fire resistance of cured film, 6* Bun sen flame applied for 3 minute*............Excellent. Fire duration lea. than 30 seconds. 0.92 0.92 None Excellent Excellent Excellent Excellent Excellent. Fire duration leas than 5 seconds. Water Vapor Perm eability at 90s F., wet cup; Grants per 100 sq^ per hr., it* cured film, 0-50% R.H....... 0.19 Pei ii-inch (grains Hg-ineh thickness).. 0.032 0.040 0.027 Resistance of coat ing to 10% H.SO., and 10% , 30% , and 85% solutions of phosphoric acids.......Excellent. No noticeable attack < ing in 30 days. Resistance of coat ing to 10% and 30% NaOH, ammonium nitrate and satu rated solution of .... ammonium sulfate... Excellent. No noticeable attack i ing in 30 days. Resistance to oils, greases, solvents.... Poor Poor Poor v lion nokorSde under car SEALER AND SILENCER HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: A compound of selected asphalts, petroleum solvents, fillers and additives which forms a tough, protective, sound deadening Aim when applied to the underbody of automobiles This dense coaling offers protection against rust, muffles, noise protects against abrasion caused by flying gravel, and seals out dust When properly applied by spray to the under body, fenders, and hood of the automobile it lasts for the life of the car. Produced by Lion Oil Company under U. S. Patent No. 2,393,774. SHIPPING INFORMATION: Vehicle body sealer or sound deadener. 5-gal. pails: 54-gal. drums. LION NOKORODE NO. 2002 UNDERCOATING AND SOUND DEADENER HYDROCARBONS & POLYMERS DIVISION GENERAL INFORMATION: A compound of aophslte. petroleum solvents, fillers and additives designed to protect the underbody of automobiles. This coating offers protection against rust, muffles noise and seals out dust. It is applied to automobile underhodies. fenders and hoods by spray. It has a high sound-deadening value, therefore is suitable for dampening in body construction or indus trial uses. Manufactured under U. S Patent No. 2.393,774. SHIPPING INFORMATION: Vehicle body sealer or sound deadener. 5-gal. pails; 54-gal. drums. LION NOKORODE WATERPROOFING COMPOUND HYDROCARBONS 8. POLYMERS DIVISION- LITERATURE AVAILABLE GENERAL INFORMATION: A solvent cut back of sclented asphalt base containing proper proportions of asbestos and other mineral fillers to cure to a highly waterproof, tough and adherent film upon evaporation of the solvent It is made epecificelly for waterproofing below-grade structures. TYPICAL PROPERTIES AND PERFORMANCE: Flash Point, Peusky-Martens, Min......... ... . 100"F Non-volatile Matter, Min....... 71% Lineal Shrinkage, Max............................................................... 20% Decrease in Film Thickness od Curing. Max.......................... 37% Avg. Weight, Lba./Gal. at 60F............................................... 8 5 Ash, Min...................................................................................... 13% Deacidized Resinous Clays, Min ............ 8% Slump -- 3/32 in. film on vertical surface at 100F.. None Water Vapor Permeability at 90F. wet cup, perm inch (grain per q. ft.-hour- tnch Hg-inch thicknesa).................................................... 0.0023 Resiatance to Abrasion by Sandblast............................. Excellent Resistance of %-inch dry film thickness over a firm subatrats to Hydrostatic Pressure exerted by an 80 ft. Head of Water............................. Excellent Voltage Breakdown, Volta per mill thickness........... . 500 + Fire Resistance of Cured Film, 6-inch Bunsen fiame applied for 3 minutes................... No falling of asphalt dropleta. Fire duration lees than ooe minute after flame is removed Resistance to solutions of Acids, 60-day immeraion of steel panel* coated with 3/32' inch film......... No appreciable attack, blister ing or hardening of coating or of DhosDboric acids. Resistance to solutions of Alkalies and Salta, 60-day immera on of steel panels coated with 3/32' inch film............................. No appreciable attack, blister ing or hardening of coating or corroeioo of panels by solu tion* of 10% and 30% NaOH. 45% Ammonium Nitrate, and saturated solution of Ammon ium Sulphate. ElongatioD after 4 years............................................. 10% Minimum Sheer Strength, lb* per aq. in. when applied to polished steel................... .................... 160 4 Meets requirements of Federal Specifications M1L-C-82052 (I)ocksi. LION* PAPER LAM INANT HYDROCARBONS & POLYMERS DIVISION GENERAL INFORMATION: Used in manufacturing laminated waterproof paper bags. SHIPPING INFORMATION: Petroleum Asphalt (other than paint, stain or varnish). Tank car*. LION* POLE COMPOUND HYDROCARBONS & POLYMERS DIVISION STANDARD FORM: Heavy liquid. GENERAL INFORMATION: For use in filling crevices and holes in utility line polee. Protect* wood by sealing out moisture SHIPPING INFORMATION: Roofing Cement 5-gal metal pails LION* SOLID ROOFING ASPHALT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: A solid-liquefied by heating GENERAL INFORMATION: A firm, adhwive waterproofing bitumen, designed for use as a hot application material. It is made by a combination of vacuum distillation and oxidation and contains no undesirable materials such as are produced by the cracking process. It is non-corrosive and does not contain free carbon, cn.il tar, or cracked residues. Careful processing minimizes the posaihilu y of breakdown of the petroleum molecules completely preserving the characteristics of strength and toughness. 0684965 TOWOLDMONOQ43048 SPECIFICATIONS: Thi* product i* prepared in five grade*: 135/148" melt; 140/160" melt; 160/180" melt; 180/200" melt end 180/200" C F. melt The 180 '200" C-F. doe* not require a gi*v*l or eleg cover Lion Solid Roofing Aaphalt*. depending upon grade, comply with the following ipeci6catione: AASHO M115-S2. Type A: ASI M D449-49. Type A Federal SSA-666 Am. I. Type I. Claat A: ASTM D-449-49. Type C- Lion Solid Roofing Aaphalt alao can be auppiied within a eoftening point range of l$0/lo5"F. to comply with SS-A-666 Am I. Type II Grade I. Claee A. and within a eoftening point range of 165/190F. to comply with SS-A666, Am. I. Type fl. Grade 2, Claee A. USES: Lion Solid Roofing Aephalt i* ueed aa a hot application material for built-up roofe of varioua apecificationa. SHIPPING INFORMATION: Petroleum Aephalt (other than paint, atain or varniah). 400-lb. metal drum*, 100-lb. fiber certone. PAVING ASPHALTS ASPHALT CEMENTS AND CUTBACK ASPHALTS HYDROCARBONS & POLYMERS DIVISION GENERAL INFORMATION: Aephalt cemente and elow-curiDg, medium-curing, end rapid-curing aephaltlc paving materiala of all gredee can be luppliea. The baee aephalta are propane-extracted and vacuum-reduced from crude oila of higheet quality, SPECIFICATIONS: Product* are available to comply with requiremente of moet federal, ASTM, AAH90, atate. county and municipal apecificationa. USES: Product* cover th* entire range of Mphattic material* re quired in con*truction. from a*phalt cement* tor heavy-duty high way* to teal and maintenance cutback* and alow-curing oil* for duel palliative*. SHIPPING INFORMATION! Petroleum Aephalt (other than paint, etain or varniah). Tank can. truck*, 400-lb. drum*: 55-gal. drum*; depending upon the product type and ahipping dietance. LION* COLAY PAVING ASPHALT HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE (Developed by Lion Oil Company) STANDARD FORM: Solid. GENERAL INFORMATION: Colay Paving Aaphalt ie especially deelgned for uee in preparing a ready-mixed paving, patching and resurfacing material, marketed by contractor* a* Coley Aaphaltic Paving Material. It la designed to fumiah high-type pavement eurfaclng and low-coat pavement maintenance to localities which do not have ecceae to an aaphalt mixing plant. raving material, i-ion aeua uouv raving Aepnait which u ueed in a (peclai procee* developed by Lion Oil Company to produce the ready-mixed Colay Aaphaltic Paving Material. In thi* proceea. Coley Paving Aepnait (a combined with crushed lime*tone or alag, blended tend* and mineral filler at centrally located mixing plant* to produce Cot*^ Aaphaltic paving MaUriel which requiro no job-iite preparation. All moisture l* removed from the eggregau. which i* than ecreened Into eepanu *1**# for proper proportioning by weight before mixing. Coley Paving Aaphalt It added to the proportioned mixture and th* combined materiala then go through a procee* which thoroughly coat* all th* aggregau with aaphalt. to Colay Paving Aaphalt at the refinery. Valuable properties *r* excellent reeieUnc* to weathering, high ductility and *trong *dheeivenee*. The natural high Undency to resist displacement by water hae bean increaaed. Stock-pUed mlxa* have been waur flooded for prolonged period* without sign of diatrea*. Coley conUin* no petroleum aolvente and there ia unlike other material* which depend on th* evaporation of their cur*-retarding agent* to reach a aatiefactory "*et,r condition. SPECIFICATIONS: Colay Mix No. 1 t* deeimed for u*e a* a aealing and wearing cour** on old bituminou* eurface* which have only minor irregularities but which are cracked to the extent that water can teep into th* ba*e. MU No. 2 ia deeigned for uee on old pavement which la In need of a leveling court* a* well a* * tealing and wearing eurface. MU No. 3 ia designed for construction of a urface cour** on new or reshaped beet. Precise specifications will depend upon ipecUl requirement*, aggregau to be ueed, and other verUbl* factor*. USES: Colev Paving Asphalt la uaed in preparing ready-mUed Colay Asphaltic Paving Material to provide an aaphaltic concrete treat and highway pavement, for surfacing playground* and park ing area*, and for eimilar purpoee*. SHIPPING INFORMATION: Petroleum Asphalt (other then paint, slain or varnish). Tank cer*. - / LION* D-80 JOINT COMPOUND HYDROCARBONS & POLYMERS 0IVISJ0N STANDARD FORM: Solid GENERAL INFORMATION: A compound developed t>y [.mn I uee aa a euperior, hot-poured, concrete joint compound LION* MEMBRANE LINING HYDROCARBONS & POLYMERS DIVISION- LITERATURE AVAiiABL (Manufactured Under U. S Patent No. 2.450.756). STANDARD FORM: Solid--Liquefied by heating GENERAL INFORMATION: Thi* hot application '40<)F > wa# originated and developed by Lion Od Company under d No. 2,450.756. eaUlytically blown aaphalt, using phoii>i> pentond* ** the ceUlyet. TYPICAL PROPERTIES; Flash point C O.C., min.................. loftening point (RAB)............ 'enetration at 77"F., 100 g.. 5 eec.. "enetretion at 32F1J 200g , 60 sec.. min "anetration at 115*F., 50 g., 5 aec.. max JuctUity at 77"F., 5 cm., per minute, min <oe* at j25"F., 8 hour*, mas..... Penetration after loe* on heating. 77"F., 100 g.. 5 aec.. % of original, min. Bitumen (eoluble in carbon tetrachloride), mi JOO'I 50-r 3 5 cn 1 0" 60 0" 97.0" PLASTICS RESINS PLASTICIZERS NYLON RESIN NYLON 6/6 AND 6/10 RESIN Monaantog Nylon Retin for molding and ortrunon HYDROCARBONS * POLYMERS DIVISION-LITERATE a/AIlaBLE STANDARD FORM: Natural and colored pe!U-t GENERAL INFORMATION) Prim* 6/6 *nd * H r-.n f,,r molding and extruaion. GRADES include general purpoee. color, heat haht ,n i hydrolyai* Mbilixed. USES: PaeUner*. l&aulation, gear*, bearing* >rd m..men: 0684966 45 TOWOLDMONOQ43049 STYRENE RESINS/PLASTICS LUSTRAN ABS AND SAN MOLDING AND EXTRUSION MATERIALS HYDROCARBONS & POLYMERS DIVISION - LITERATURE AVAILABLE l.uitran A US (Acryloi litrilc-butadiene-styronc) Extrusion 761 461 261 Molding 740 Highest shock resistance, greatest elongation, greatest flexibility. f>40 High shock resistance, good tensile strength, intermediate rigidity. 440 Medium shock resistance, intermediate rigidity, high tensile strength, hard surface, high gloss. 240 Highest tensile strength, highest gloss, best chemical resistance, best abrasion resistance Excellent for use in applications requiring higher heat resistances. }262 Physical properties same as61 aeries. Primary 462 use for profile extrusions with high gloss 762 application, SAN (styreiic-acrylonitrile) Extrusion & Molding Transparency, high strength, highest rigidity, 20 Series. chemical resistance to such chemicals as acids, bases and petroleum derivatives. LUSTREX STYRENE EXTRUSION MATERIALS HYDROCARBONS & POLYMERS DIVISION - LITERATURE AVAILABLE STANDARD FORM: Luttrtx styrene is furnished in pellets, either natural or colored. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Can be extruded as sheeting or as profile shapes for various applications requiring high impscl strength. USES: Luilrtx styrene is widely used for such applications as: Refrigerator door liners, toys, lighting fixtures and games. INDUSTRIAL USERS: Automotive, Construction, Electronics, Machinery and Appliances, Packaging, Toys, Housewares, Furni ture, Lighting. SHIPPING INFORMATION: Hopper Cars (Dri-Flo), fiberboard mlsiners (1,000 lbs ), multiwall bags (50 lbs ), drums LUSTREX STYRENE MOLDING MATERIALS HYDROCARBONS 8. POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORMS: Luilrtx styrene, one of the lightest and most widely used thermoplastic molding materials, is available for compreeeion molding, injection molding and extrusion in all types of machines and molds. Special formulations available for sheet extrusion and vacuum forming applications. Special formulations for general purpose application: Luilrtx Hi-Flow 65 (improved flow), Lustres Hi-Flow 66 (good~flow, moderate aet-up), Luttrex Hi-Flow 77 (good flow, fast aet-up); medium and high Impact strength applications. Luilrtx Hi-Test <f1 and Luttrtx Hi-Test 48 (medium t).' Luilrtx Hi-Test 88, 68-2, 88-5, 93 (high impact); Highgeneral purpose applications; Luttrtx High-Heat 99. 101. .mlrtx Hi-Test 91 (neat resistant, high impact.) GENERAL INFORMATION: Other special formulations available for applications requiring ultra-violet light stability (general purpose and impact Luilrtx perms tone) and duat resistance (general por|>ose and Impact formulations of Luilrtx Lo-Stst). s PROPERTIES AND PERFORMANCE CHARACTERISTICS: Molding Compound. Luilrtx styrene is tasteless, odorless and non toxic with higli dimensional stability, hardness, rigidity and dielec tric strength. It esn be molded to any sharply defined detail and finish. Available in a broad range of transparent, translucent and opaque colors as well as crystal. USES: A wide range of typical applications includes: Refrigerator parts, toys, packaging, air conditioner cabinets, radios, housewares, wall tile, television components, displays, electrical equipment, lighting fixtures, furniture drawers and phonograph records INDUSTRIAL USERS: Automotive. Construction, Electronics, Machinery and Appliances, Packaging, Toys, Housewares. Furni ture, Lighting. SHIPPING INFORMATION: Hopper cars (Dri-Flo) fil>erboard containers (1000 lbs ), multiwall bags (50 lbs ), drums (350 lbs.). Rail- Plastics, Synthetic, Other Than Liquid, NOIBN, Truck: Plastics, Granules. L-Jjt..... LYTRON LATICES PLASTIC PRODUCTSAND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Water emulsion PROPERTIES AND PERFORMANCE CHAR t( TERIST l( S Aqueous dispersion of polystyrene and styrene copolymers I <cd as a binder, saturant or coating. USES; Lyt'on I.slices are used as opacificrs in liquid detergent systems, howl cleaners, pharmaceutical products, and related items Also, in textile saturating in the preparation of shoe components such as box toes and shoe counters I'sed for stiffening foam rubber, in water-based paints, specialty paper coatings and adhesives SHIPPING INFORMATION; Steel Drums f47'> lbs ). tank cars, tank trucks. Rail: Plastics. Synthetic Liquid. NOIBN Truck Plastics. Liquid. NOI. LYTRON RESINS PLASTIC PRODUCTS AND RESINS DIVISION - LITERATURE AVAILABLE STANDARD FORM: Powder. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Protective colloid. Film former. Promotes adhesion, aiabiltres, hardens and thickens aqueous systems. USES: Alkali-soluble or solvent-soluble resins for use in adhesives, coatings, and as a stabilirer, emulsifying agent, protective colloid, and pigment dispersant. Soil release agent. INDUSTRIAL USERS: Adhesive Manufacturers. Textile I'rore* sors, Surface Coating Manufacturers, Producers of Emulsion Floor Waxes and Detergents. SHIPPING INFORMATION: Bags Rail Plastics. Synthetic. Other Than Liquid, NOIBN. Truck: Plastics, Granules. RJ-100 AND RJ* 101 RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Supplied in flake form PROPERTIES AND PERFORMANCE CHARACTERISTICS: Low molecular weight styrene-allyl alcohol copolymer resin raw materials Can be used as hard resin additives or more commonly as raw materials for esters, ester adducts, ester emulsions, etc. The use of RJ-100 and RJ 101 in these derivatives ensures excel lent chemical and corroeion resistance in both organo and aqueous soluble coatings. USES: Derivatives used as exterior latex modifiers (RF-631H>, industrial primer vehicles, water-soluble coatings, in printing inks in alkyd and polyester manufacture, in urethane coatings SHIPPING INFORMATION: 50-lb bags POLYVINYL ACETATES GELVA COPOLYMER SOLUTIONS PLASTIC PRODUCTS AND RESINS DIVISION- LITERATURE AVAILABLE STANDARD FORM: Water white or slightly yellow solvent solutions. PROPERTIES: Available in two types of solvent solutions Grlva C-254B in benzene and Gtha C-254H in a mixture of hexaneheptane. Viscosity of Gtlva C-254B i* 1200 cps., while Geha C-254H has a viacoeity of 500 cps. Both materials are supplied at 35^ solids USE8: An effective release coating for pressure sensitive tapes Gives controlled release when used in combination with common backsizing agents which have been applied to paper from organir solutions. SHIPPING INFORMATION: Available in 55-|a1lon. resin-lined, closed-head, steel drums, 420 lbs net weight for Gtlva C-2MB. 350 lbs. net weight for Gtlva C-254H. Also shipped in truckload quantities (20,000 lbs. min ). GELVA MULTIPOLYMER SOLUTIONS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Water white or slightly yellow solvent solutions. PROPERTIES: Available in five standard types GMS-260 and 263 are acrylic containing copolymers. GMS-264, 269 and 270 are maleate-acetate copolymers. GMS-260 and 263 dry to produce permanently tacky films. All give films which are water resistant and have outstanding adhesion. Solvents rsnge from eater-aliphatic hydrocarbon blends to alcohol. Solids content ranges from 40-35 V . Viscosity from 500 to 40,000 cps at 25C. USES: Primary application is in the adheeive field, including pres sure sensitive adhesives and laminating adhesives for diflicultto bond surfaces. Also useful in surface coating and specialty paper coating applications SHIPPING INFORMATION: Available in non-returnable, open head steel drums containing 400-440 pounds net weight. 0684967 TOWOLDMQN0043050 GELVA POLYVINYL ACETATE COPOLYMER RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: White, fine bead* PROPERTIES: Available in six grades of carboxylated polyvinyl Bcelate resins which have all the properties of polyvinyl aceiale but arc also soluble in dilute alkali. The resina are alao soluble in organic solvent*. Film* produced from solvent solutions are water resistant, ycl may be removed with dilute alkali. Viscosity of 86 grants of resin in 1000 ml. of ethanol ranges from 10 cps. for Ge/io C-3 V-10 to 110 cos for Gelva M-7 V-100. Softening point* range from 1230. to |80C The copolymers have outstanding adhesion to such material* a* metals, leather and cellulosicg. USES: Typical applications include hot melt and advent adhesives; brat-scalable, clear coatings for paper and plastic film* with excel lent glos*. printability, grease proofness, wet rub and abrasion resistance, siring for ravon cotton and acetate yarns, anti-tarnish lacquers tor silver and other metals and temporary protective coaling# for metal and painted surfaces. The alkali soluble nature of these coatings allows easy removability when required. 91I1PPING INFORMATION: Available in non-returnable fiber drums, 100 Pub. net weight. GELVA POLYVINYL ACETATE EMULSIONS PLASTIC PR00UCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANPABD FORM: Aqupou* dispersion* of polyvinyl acetate resins milk-white in color. PROPERTIES: Available in a full range of homopolymer* and copolymers which vary in viscosity, particle sire, molecular weight, film forming properties and emulsifying systems. Some grades are borax stable, dextrine compatible and nave varying solvent toler ance. Emulsions are also compatible with a wide range of plasticizers, resins and extenders, pigment* and dye*. Films and coatings pro duced from the different emulsions vary in adhesion, tensile strength, hardness, hent-sealing temperature, water resistance and other physical properties USER: Typical applications are in the manufacture of adhesives for paper, wood, vinyl, leather, cloth, polyethylene, foil and a wide variety of surface*; as binders for paper pulp, cork and textile fabrics; a* coatings for paper, cloth, wood, metala and ceramics; as fast drying, tough, odorless paints; as coatings and impregnators for paper and paperboard; as pigment binders tor paper and paper board coatings; and as textile sizes and finishes SPECIFIC USES: Each grade of emulsion generally ha# a number of broad end use* However, in some cases, the emulsions are highly suited for specific applications. Gelva Latex 925 makes a high pick resistant, non-yellowing, odorless pigment binder for paper coatings. Gelva Emulsion TS-100 i# used In making adhesives with good per formance on difficult surface* such as vinyl, Mylar polyester film and similar surfaces. Gelva Emulsion* S-98 and S-97. which are dextrine compatible, are used in making remoistenable adhesives. Geha Emulsions S-51 and 900 are used as wet-end additives id pro ducing tough, bend-resistant paperboard. Gelva Emulsion S-55 has superior compounding stability, quick tack and bond strength and is used in a wide number of adhesive applications. Gelva Emulsions TS-30, TS-T0 and TS-71 are used in formulating quality exterior end interior paint*. Films cast from Gelva C-3 Emulsion are highly water resistant, but. due to carboxyl groups on the polymer chain, are soluble In dilute alkali. Other emulsions are available for specific adhesive, paint and paper coating application*. SHIPPING INFORMATION: Available in non-returnable steel drum* or fiber containers, 500 lbs. net weight; in tank trucks and In rail tank cars. GELVA POLYVINYL ACETATE POWDERS 700 and 702 PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: White or cream-colored free-flowing powders, PROPERTIES: Available In two grade* of sprsy-dried powder-- GetvQ Powder 700 and Gelva Powder 702. Gelva Powder 700 has excellent stability end promotes cohesive and adhesive strength, toughness, flexibility and resiliency to dry mix adhesives and ce mentitious product*. Grlco Powder 702 is used where borax and or dextrine stability la required. Used to produce joint compounds, other building products and adhesives in dry powder form USES: Principal applications are in the manufacture of dry mix joint compounds, adhesive* and cement patching materials. SHIPPING INFORMATION: Available In polyethylene lined Kraft bags, 50 lbs. net weight. GELVA POLYVINYL ACETATE RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Granules and lumps. PROPERTIES: Available in six different grades with viscosities ranging from 1.35 cps to 900 cps. (80 gram* of resin in 1000 ml. of benzene). Gelva Resin* are thermoplastic, transparent, colorless, odorless and tasteless with excellent adhesion to a wide variety of surfaces. The grades also differ in tensile strength, flexibility and softening point. Soluble in ketones, esters, chlorinated and aromatic hydrocarbon*, and certain alcohol* Compatible with many plasti cizers. including phlhalaie* and phosphates. USES: Typical application* for Gelva Reelns include hot melt and solvent based adhesives, paper and textile coatings, printing inks, and aa a base for chewing gum __ Mf-f SHIPPING INFORMATION: Available in multi-wall hug. '.o !h* net weight. Gelva Resin* V-l1^ shipped in oon-reiumaile nt-i-r drums, 66 lbs. net weight. GELVA RESIN SOLUTIONS PLASTIC PRODUCTS AND RESINS DIVISION - LITERATURE AVAILABLE STANDARD FORM: Viscous solvent solutions of polyvnyl ,v etat-PROPERTIES: Available in two types of Geha solution* V-"'" F34 in ethyl alcohol and V-7-M50 in methyl alcohol Vuowiy range* from approximately 2.500 cps for V-7-M50 to approximately 50.000 cps for V-55-E34. Total solids range from ll-Cr to ">tr, Films and coating* produced from the solutions have excellent gloss, clarity and water resistance. They are also non cormxive and neutral. USES: Can be used for bonding pajxcr. wood, glass, leather, textile*, ceramics, metal foil and many plastic material* I'sed in shoe cements, in laminating metal foil to cellophane and for preparing plastic wall tile adhesives In the paper industry solution* are used to produce transparent high gloss coatings, which adhere well to surfaces and are unusually stable to light and oxygen Also used a* overprint varnishes, greaseproof coating* and pigment binder* SHIPPING INFORMATION; Available in non-returnable steel drum#. 400 lbs. net weight, and in truckload* (20,000 (|>* mm > and carloads (30,000 lbs. min ). POLYVINYL ALCOHOL RESINS GELVATOL POLYVINYL ALCOHOL RESIN PLASTIC PRODUCTS AND RESINS DIVISION - LITERATURE AVAILABLE STANDARD FORM: White, high bulk density powder. PROPERTIES: Available in a large number of grade* which differ in degree of polymerization, per cent hydrolysis and residual acetate content. Resins are water soluble and glycerine is the must widely used plasticizer. Viacoeity of a 4% aqueou# solution range* from approximately 2 cps for Gelvatol 40-10 to 60 cps for Ce/iuM 1-90. The resins are non-dusting, have high bulk densities which make storage easier, and provide clear solutions in water Film* cast from Gelvatol are extremely tough and have excellent solveni. oil and grease resistance, high tensile strength, and a high degree of impermeability to most gases. USES; Typical application* include dry mix adhesives and building products; textile sizing and finishing; paper coating and siring, a* f>rotective colloid* or surface active agents for emulsion polymer, zation; a* binders for china, ceramics, etc; a* photo sensitive coatings or tenril screen# and printing plates, and as water soluble films far packaging soaps, detergents, chemical*, etc. SHIPPING INFORMATION: Available in multi-wall paper hag*. 50-lbs. net. POLYVINYL BUTYRAL FILM SAFLEX VINYL BUTYRAL PLASTIC PROOUCTS AND RESINS 0/V/S10N- LITERATURE AVAILABLE STANDARD FORM: A continuous adheeive film supplied in clear, translucent, tinted or gradated color, for the plastic interlayer m laminated safety glaa#. PROPERTIES AND PERFORMANCE CHARACTERISTIC'S: Laminating material. Tough and resilient; transparency of a superior quality; excellent adhesion to glass. USES: Sallex is used as a protective interlayer for laminating safety flass in automotive, aircraft, and architectural application* unctional properties which Saflex provides in addition to safety are heat and glare control, sound reduction and resistance to bullets and burglar*. Saflex is also used to laminate reflective coating*, painted design* and embedments between layers of gin** for sundry exterior and interior application* such as mirrors, room divider*, shower stalls and table tops. SHIPPING INFORMATION: Standard 15 ga and 30 g, supplied in 750 ft. and 1,500 ft. roll*; shipment# made in tube pallets. Rail: Plastic*, sheets, not woven. NOIHN Trti< k film, transparent or translucent other than cellulose, not i not printed in sheets, not further processed than cut to sire POLYVINYL BUTYRAL RESINS BUTVAR RESINS PLASTIC PROOUCTS AND RESINS 0IVISI0N- LITERATURE AVAILABLE STANDARD FORM: White free-flowing powder PROPERTIES: Produced in seven type* or grade* varying m cosity and hydroxyl content. Viscosity of a itV" solution m * ethanol range* from approximately 55 cps (for Ifatvar H to 0684968 47 TOWOLDMON0043051 1570 cn* (for Rulvar B-72A). Tbe resin* ere generally soluble in alcohol*, glycol ester* and certain mixtures of polar and noti-polar solvent*. They are compatible with a number of plasticizers in cluding plithalalee, phosphates, castor oil* and others. USES: Deed In making metal primers and conditioners: wood primers and aealers, structural and hot melt adhesives; textile coalings and printing inks As a coating for rainwear and other textiles. BuUvr provide* outstanding adhesion, flexibility, abrasion resistance, water resistance and is transparent. As an additive to metal and wood coatings and primers, the resins upgrade intercoat adhesion, flexibility, impact and abrasion resistance, and flow properties Can be used to upgrade coating performance of such thermosetting materials as phenolic*, ureas, melamines, epoxies, alkyds, polyurethanes and polyesters. SHIPPING INFORMATION: Available in lined, non-returnable fiber drum*. 125 Ibe net weight. Butter B-98 is available in 115 lb. Del weight fiber drums. POLYVINYL BUTYRAL RESIN DISPERSION BUTVAR RESIN DISPERSION BR PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Aqueous dispersion of plasticized polyvinyl butyral reein. Milk-white in color. PROPERTIES: Buti'or Dispersion BR has a viscosity of 1500 cps. and contains 40 parts plasticizer per 100 parte resin. Films cast from Dui)>eriion BR are tough, light transparent and dry at room temperature. It dries clear, colorless films which are unaffected by boiling water. Films are atrong and adhere well to a range of sur faces, resistance to water, heat and sunlight is excellent. USES: Used In textile Industry to impart abrasion resistance, durability, strength, slippage control and reduced color crocking to a variety of materials. Used as abrasion resistant finish for automobile Met belts and parachute harnesses. They are also used in the textile Industry a* a soft, full-bodied finish for rayoD, cotton, or nyton; a* a durable, non-raveling finish for filsment yarns; snd as a finish for curtain and drapery fabric#, glass fabrics, upholstery goods, webbing, awnings, canvas and duck. Also used as a rug backing, and greaee- Eroof, washable coatings for wallpsper, window shades and packagig materials. Can be formulated for use as a strippable coating for mats! end other subetrete*. SHIPPING INFORMATION: Available in non-returnable 55gallon steel drums, 425 lbs. net. Lew* than one drum lots packaged in 6-galloo container*. POLYVINYL FORMAL RESINS FORMVAR RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: White, free flowing powder. PROPERTIES: Available in aix basic grade* varying in viscosity and solubility. Viscosity of a 5% solution in ethylene chloride ranges from 5-H cp*. for Formvor 5/95 to 50-80 cp. for /"ormwir 16/958. The reelne are soluble in phenols, some chlorinated hydro carbons, and in mixtures of alcohol* and aromatic hydrocarbons. Plasticizer* for the reein* include phlhalste*. phosphates, glycollete* and many others. USES: Formvor 15/95E is widely ueed in making tough, heatresistant wire enamels for hermetic system*. Enamels are soldereble. bondable, have high cut-through and burnout rMlatance, ana excellent resistance to common refrigerant*. Formior resins are also ueed in structural and hot melt adbeelves; in wash primers, can and drum linings; and as wood sealers and knot aealers. SHIPPING INFORMATION: Available in non-returnable fiber drums Formvor 5/95, 100 iba. net; Formvor 12/66, 110 Ibe. net; and Formvor 15/95, 190 Iba. net. VINYL RESINS/PLASTICS OPALON POLYVINYL CHLORIDE DISPERSION RESINS HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Finely divided white powder. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Specially developed reein* for uec in preparing plaatisol* and organo sols through simple stir-in techniques Opalon 400 Low temperature gelling and fusing reein Opalon 410 - General purpose resin Opalon 440 Low emulsifier reein, high clarity, low moisture pick up U9ES: Fabric and paper coatings, slush and rotational molding, dip coating*, and vinyl foam. SHIPPING INFORMATION: Mulliwall bags (40 Iba). Rail. Plastic*, Synthetic, Other Than Liquid, NOIBN. Truck: Plastics. Powder. 48 OPALON POLYVINYL CHLORIDE GENERAL PURPOSE RESINS HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: White free-flowing powder. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Specially developed resin* to give excellent physical and electrical properties a* well as exceptionally good color, high clarity, and outstanding heat stability in a wide variety of dry blending and compounding applications Opalon 600- Lowest moleculsr weight resin for specialty molding and extrusion applications Opalon 610- Very low moleculsr weight resin for flooring, injection molding, and extrusion applications Opalon 630- Medium-low molecular weight resin for injection molding, calendering, profile extrusion, and wire and cable applications Opalon 650- Medium-high molecular weight resin for calendering. wire and cable, profile extrusion, snd injection molding applications Opalon 660- High molecular weight resin for wire and csble. profile extrusion, and calendering application* USES: For dry blending and compounding operation*. Typical end usee include wire ana cable insulation and jacketing, flooring, rain wear, upholstery, electrical tape, garden how, clear packaging films, welting and molded shoe components. SHIPPING INFORMATION: Hopper cars; fiberboard containers (1.000 lbs.); multiwall bags (60 Iba.). Rail: Plastics, Synthetic. Other Than Liquid, NOIBN. Truck: Plastics, Granules. OPALON POLYVINYL CHLORIDE WIRE AND CABLE COMPOUNDS HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Free-flowing H* cubes in natural, black, white, and other colors. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Formulated to meet the most exacting UL, military, and industry specifications, Opalon compounds combine a high level of physical and electrical properties with fast extrusion rate* and excellent extruded surface appearance. Opalon 1022--Primary Insulation, T, TW Opalon 1025-- Primary Insulation, T, TW (semi-rigid) Opalon 1038 Primary Insulation, Jacketing, T, TW, 80C. ()') Opofon 1040- Primary Insulation, T, TW, THW Opalon 1041-Primary InsulatioD, T, TW, THW, 80-90 appliance Opalon 1102-- Rural and urban telephone distribution wire Opafon 1219 General purpose low temperature jacketing Opalon 1309 -SPT, Molded plugs Opalon 1406-1--Primary Insulation, 90C., 105C., low odor Opalon 1431-- Printary Insulation, 90C. Opalon 1444 -Primary Insulation, --55C. to 105C. military wire Opalon 4700- Semi-rigid molding and extrusion application* USES: In addition to the wire and cable application*, the high level of toughness and excellent extruded appearance recommend Opalon compounds for a variety of profile extrusion and injection mo'ding applications. SHIPPING INFORMATION: Hopper cars; fiberboard container* (1,000 lbs ); multiwa!) bags (50 Iba.). Rail: Plastics, Synthetic, Other Than Liquid, NOIBN. Thick: Plastics, Granules. STYMER COPOLYMER RESINS See Ptgo 70 ULTRON POLYVINYL CHLORIDE F/exiblt Film tnd Shotting. HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Flexible film, embossed or plain, in gauges .0027 to .020* and widths up to 75*. Specialty formulated film with "built-in" properties and varyine degree* of flexibility are available for specific industrial and agricultural applications. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Fabricating material. Vltron film is noted for its uniformity of gauge and color clarity. Water reeistant. abrasion resistant Avail able as translucent, opaque or transparent film which may be firinted, emboeeed or molded. Tasteless, tough, pliable and long- asting, Vltron film is highly adaptable to various manufacturing technique* such a* laminating and heat Mating. USES: Low temperature formulations are uMd as protective coverings for machinery. Industrial application* Include moisture barriers, industrial and electrical tape*. As a laminating material, Vltron has proven valuable for wall covering materials, flooring, glass batt insulation, paper and swimming pool liners. INDUSTRIAL USERS: Agriculture. Automotive, Construction, Machinery and Appliance, Textiles, Furniture, Housewares, Wire and Cable, Luggage. SHIPPING INFORMATION: Cardboard Box. (150 lbs) Heavy duty Kraft paper wrap, (350 lbs.) Rail: Plastics, sheets not woven NOIBN. Truck: Transparent or translucent material- Plastic film, transparent or tranaluceDt other than cellulose, not woven, not printed in rolls exceeding 81* * in diameter. Opaque Plastic film or sheeting not woven, other than ceiluloee, other than transparent or translucent. 0684969 TOWOLDMON0043052 JUF*---***"*^1 TiV ,1frti 4fcrw.. AK as. VYRAM RIGID VINYL COMPOUNDS FOR EXTRUSION AND MOLDING HYDROCARBONS 4 POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Free-flowing 1/8 inch cubes in natural and colors. Vyram 2736 -- A type 2 high impact rigid vinyl extrusion com pound for industrial applications. Vyram 2746 - An intermediate impact rigid vinyl extrusion com pound for industrial applications. Vyram 2745 - An intermediate rigid vinyl extrusion compound ultra violet outdoor stabilized for structural Vyram 2810 - A clear blow molding compound for non-food parkaging applications. Vyram 2850 - A clear blow molding compound for food packaging Vyram 3000 - An intermediate impact rigid vinyl extrusion and injection molding material formulated expressly for pipe and fittings. Meets NSF requirements for use with potable water. Vyram 3002 - An intermediate impact rigid vinyl extrusion com pound for extrusion of pipe. Meets NSF require ments for use with potable water. PROPERTIES: Balanced combinations of high strength, tough ness, chemical resistance, abrasion resistance, non-combustible and ultra-violet light resistance. This product's ease of fabrication, uniform quality and increased extrusion rates mean lower processing costs and improved part quality. SHIPPING INFORMATION: Hopper cars; fiberboard containers (1,000 lbs.): multiwall bags (50 lbs.). Rail: Plastics, Synthetic, Other Than Liquid, NOIBN. Truck: Plastics, Granule*. POLYETHYLENES MONSANTO POLYETHYLENE BLOW MOLDING COMPOUNDS HYDROCARBONS & POLYMERS DIVISION- LITERATURE AVAILABLE STANDARD FORM: Pelleted blow molding compounds are avail able In natural color with or without anti-stat. GENERAL PROPERTIES AND PERFORMANCE CHARAC TERISTICS: Monsanto Polyethylene, natural, is chemically inert, non-toxic and odorless. Products blow molded from Monsanto Polyethylene resins are tough with a high impact resistance, good gloss and color, and suitable for packaging a wide variety of house hold and industrial chemicals, foods, and toiletries. MPE 200 High Density (.950) blow molding resin M` PE *20"1 High Density (.950) blow molding resin, anti-atat MPE 210 High Density (.955) blow molding resin MPE 211 High Density (.955) blow molding resin, anti-stat MPE 215 High Density (.955) blow molding resin MPE 216 High Density (.955) blow molding resin, anti-stat MPE 220 High Density (.960) blow molding resin MPE 80 Low Density for squeeze bottles USES: Some of the typical applications are: Bleach, detergent, and milk bottles, "squeeze" bottles, and molded liners. SHIPPING INFORMATION: Hopper cars: fiberboard containers (1.600 lbs ); multiwall bags (50 lbs ). Rail: Plastics, Synthetic, Other Than Liquid, NOIBN. Truck: Plasties, Granules. MONSANTO POLYETHYLENE EXTRUSION COATING MATERIALS HYDROCARBONS & POLYMERS DIVISION --LITERATURE AVAILABLE STANDARD FORM: Supplied in petlet form. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Paper and coating resin. Fortifies surface with high gloss and scuff resistance. Heat sealable. Improve* printability of wax coatings. USES: A reinforcement for paper end board coatings for packaging and costing for flexible packaging material*. MPE 70 General Purpose MPE 73} High-speed coating and laminating resins MPE 75 Approved milk carton and military barrier coating MPE 77 Versatile, high-strength SHIPPING INFORMATION: Hopper cars; fiberboard containers (1.600 lbs ); cnultiwall bags - Other Than Liquid, NOIBN MONSANTO POLYETHYLENE FILM AND SHEET MATERIAL HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Supplied in pelleted form. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Extruding material. Monsanto Polyethylene is a tough, impactresistant resin, extruded as film and sheeting. It is ehemical-resiBtant, flexible over wide temperature ranges, lion-toxic, odorless, nonpolar, low dielectric, and easily processed by dry blending into a wide range of colors. U9ES: Packaging films, vapor harrier mai and high clarity films. filrm. MPE 35 MPE 90 MPE 91 High clarity, medium impact General purpose packaging iand industrial film slip General purpose packaging a ind industrial film MPE 93 General purpose packaging and industrial til high slip SHIPPING INFORMATION: Hopper cars, fiberboard . (1,600 lbs.); multiwall bags (50 lbs) Bail Plastics S Other Than Liquid, NOIBN. Truck. Plastics, Granules MONSANTO POLYETHYLENE WIRE AND CABLE COMPOUNDS HYDROCARBONS & POLYMERS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Pelleted form, naiursl and black PROPERTIES AND PERFORMANCE CH AR ACTEKISTIC Extruding material. Monsanto Polyethylene is used for wire inn lation and jacketing. All compounds contain electrical grade an oxidanta, are of high purity, low dielectric, and can be process by dry blending into a wide range of colors MPE 23 4 25 MPE 12 4 14 MPE 11 MPE 19 MPE 27 MPE 240 MPE 251 Natural LDPE compound for insulation Black LDPE compound for line and drop wi and general purpose jacketing Black LDPE compound for infantry field wi insulation Black LDPE compound for telephone cable jac eting, requiring maximum stress crack reaist.im e Foamable natural LDPE compound for CAT and coaxial cables Natural HOPE for insulation Black HI>PE for telephone cable jacketing. en| daily REA types SHIPPING INFORMATION: Synthetic Resin > r-rsnules Hi cars; fiberboard containers (1,600 lbs); multiwa II bag* (.50 10 mil polyethylene bags (50 lbs) for wire and :able compni Rail: PlMtics, Synthetic, Other Than Liquid. NOIBN. T Plastics, Granules. PHENOLIC RESINS RESINOX PHENOLIC Lump, Ffakt end Reno Compound PLASTIC PRODUCTS AND RESINS DIVISION- LITERATURE AVAILABLE STANDARD FORM: Powder, lump or flske. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Industrial Resin. Excellent resistance to high heat, maximum bond strength and good chemical resistance. USES: Manufacturing of resinoid grinding wheels, brake linings, pulp moldings and for bonding of foundry sand in the production of shell molds and cores. INDUSTRIAL USERS: Automotive, Chemicals. Electronic Jets. Missiles, Machinery and Appliance, Foundry. Abrasive* SHIPPING INFORMATION: Mulliwall bags (50 returnable fiber drums (200-275 lbs). Rail- Plastics, Other Than Liquid, NOIBN. Truck- Plastics, Powder RESINOX LIQUID PHENOLIC RESINS PLASTIC PRODUCTS AN0 RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Water solutions. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Industrial Resin. Excellent resistance to high heat, maximum bund strength and good chemical resistance. USES; For impregnating or coating filler materials such as paper, cloth, wood (compreg) veneers, glass and mineral wool fiber* Bonding materia) tor resinoid grinding wheels. Resin impregnated paper for automotive battery separators. For glass and rock wool thermal and acoustical insulation. Foundry sand core binder INDUSTRIAL USERS: Foundry. Automotive, Chemicals. Con struction, Electronics. Jets, Missiles, Machinery ami Appli-im e. Pulp and Paper. SHIPPING INFORMATION: Steel drums (450-5V) lbs' tank cars, tank trucks. Rail- Plastics, Synthetic, Liquid, NOIBN, Truck--Plastics, Liquid, NOI. RESINOX PHENOLIC RESIN VARNISHES PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE 9TANDARD FORM: Supplied in alcohol solutions for lammvmg filler materials paper, cloth, glass or asbestos Speo.il high beat resistant formulations are available for use with gl,<* .iti-i-n.,s and similar fillers for jet and rocket components 0684970 TOWOLDMONOQ43053 i.,.. eULDtSmtauuaiitiiuuatft. PR0PF.RT1KS AND PERFORMANCE CHARACTERISTICS: Industrial Reams. Provides tough, durable, heat resistant bonds that also resist acids and weak alkalies. USES: For impregnating laminate filler materials auch as paper, cloth, glass or asbestos. Special high heat resistant formulations are available for jet and rocket components. Used in decorative InminSie core stock; electrical and mechanical grade laminates for radio. TV and home electrical appliances; as well as gears, ball* bearing fares, mill-'ys; bushings for light and heavy machinery, cars, planca and sb'ps, oil, chemical and paper filters; sand hinders for shell molding INDUSTRIAL USERS: Foundry, Automotive, Chemicals. Con struction, Electronics, Jets, Missiles. Machinery and Appliances, Pulp and Paper, Kubhcr. SHIPPING INFORMATION: Steel drums (450-550 lbs); tank cars, tank trucks. RESINOX PHENOL-FORMALDEHYDE RESIN LIQUID SOLUTION PLASTIC PRODUCTS AND RESINS DIVISION - LITERATURE AVAILABLE STANDARD FORM: Phenolic liquid, solutions PROPERTIES AND PERFORMANCE CHARACTERISTICS: Surface coating resin. Imparts high heat resistance and promotes good chemical resistance. USES: Baked enamel and industrial finishes for can, drum and tank car linings, special primers and coatings and wire enamels. INDUSTRIAL USERS: Paint, Varnish and Lacquer, Automotive, Chemical, Machinery and Appliance. SHIPPING INFORMATION: Steel drums (450 lbs). RailPlastica, Synthetic Liquid, NOIBN. Truck-- Plastics, Liquid, NOI. MELAMINE AND UREA RESINS RESIMENE MELAMINE AND RESIMENE UREA FORMALDEHYDE PLASTIC PRODUCTS AND RESINS DIVISION -- LITERATURE AVAILABLE STANDARD FORM: Supplied in organic liquid solution. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Surface coating resin. Imparls improved surface hardness, weather ing. alkali and chalk resistance. Promotes fast cure and excellent color retention. New high solids, low cost melamine resins have been added to the line. Some of these are also water-soluble. USES: Melamine and urea-formaldehyde resins Improve baked enamel and industrial finishes on appliances, automobiles and other fabricated metal items. Some hign soluble melamine resins may also be used as crosalinkera for water-soluble industrial coatings. INDUSTRIAL USERS: Paint. Varnish and Lacquer, Automotive. Chemical, Machinery and Appliance. RESIMENE MELAMINE PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD PORM: Available In syrup and water-alcohol, aoluble spray-dry powder*. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Industrial resin. Produce laminate* displaying strong durable sur face (hat is heat, flame and chemical resistant. Color atability and iiigh electrical arc resistance are additional characteristics. USES: Retimene Melamine ayrup and powder aolutiona can be combined with paper, cloth and glaaa fibers to provide a durable surface for all types of furniture, counter tops, cabinets, walls and industrial electrical components. INDUSTRIAL USERS: Chemicals, Construction, Electronics, Mis siles, Machinery and Appliances. Pulp and Paper. SHIPPING INFORMATION: Multiwall bags (60 lbs); fiber drums (200 lbs.). Rail- Plastics. Synthetic. Other Than Liquid. NOIBN. Truck- Plastics, powder. RESLOOM MELAMINE PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Available in powder (Resloom HP) or liquid form (M-75, M-80) as a aeries of essentially monomeric melamine PROPERTIES AND PERFORMANCE CHARACTERISTICS: Textile resin. Permanently effective to fabrics made from a wide range of textile fibers. USES: To impart shrinkage control, wrinkle resistance and textural effects to colton. rayons, synthetics and wools. INDUSTRIAL USERS: Textiles SHIPPING INFORMATION: M-75, M-80- 500 l|, drums. Resloom HP- 100 lb. drums; (except Resloom HP. whic h us in powder form). Powder; Hail- Plastics. Synthetic. Other T han Liquid N't >1BN. Truck- Plastics. Powder, Liquid; Rail- Plastics. Synthetic Liquid, NOIBN. Truck- Plastics. Liquid, NOI. COAL TAR RESINS MONTAR SYNTHETIC RESINS See Page 53 SULFONAMIDE RESINS SANTOLITE MHP RESINS ORGANIC OIVlSlON - LITERATURE AVAILABLE STANDARD FORM: Hard resin. SPECIFICATIONS: Hard, practically colorless resin; refractive index (25 gms. in 75 gme. normal butyl acetate) 1.4275-1 4325, penetration (200 gm. load for 5 aeconda at 25C.) 2.0 mm max. GENERAL INFORMATION- PROPERTIES: An aryl tulfotiaminde-formaldehyde resin aimilar to Santolite MS in characterialics, except that it ia much harder, aoftening at about 62C.. brittle at normal temperatures. Nearly colorless, well adapted to apecialty and heat-sealing lacquer*, fabric coatings, molding com positions and the like. Being incompatible with drying oils it cannot be uoed as a varnish material. USES: Used in spraying, dipping or brushing Iscauers to make dear, colorless, odorless coatings of good gloss ana adhesion. It does not materially increase the viscosity of the solution and permits the building up of a high-solids content in the lacquer. Compatible with all the common plasticizera. CONTAINERS: 60-lb. cased can*. SHIPPING CLASSIFICATION: Resin Synthethic NOIBN With out Filler. SANTOLITE MS 50% Industrial Resin. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Light-colored viscous liquid; free flowing at temperatures above 20C.; composition 78.8 81.2% Sontolite MS. 18.8 to 21.2% solvent. PROPERTIES: Soft, practically colorleea resin made by the con densation of formaldehyde and aromatic sulfonamides. USES: Sontolite MS like Sontolite MHP, is eomnatible with both nitrocellulose and celluloee acetate; as a solvent for both, it can be uaed in any proportion. Forma brittle compoaitions with both resins but the addition of a plasticizer makes such combinations permanently flexible. SHIPPING INFORMATION: Resin Synthetic NOIBN Without Filler. 450-lb*, approx., 56-gal. druma; 45-lbs. spprox. 5-gal. drums. RESIN MATERIALS ADIPIC ACID, FOOD AND TECHNICAL GRADES See Page 17 BISPHENOL A ORGANIC DIVISION MOLECULAR WEIGHT: 228.28 STANDARD FORM: White flakes. SPECIFICATIONS: Off-white flakes; crystsllizing point 154.2"C. min.; iron 0.7 ppm max.; free phenol 0.15 max.; moisture 0.16% max.; color in acetone (25;30 ml) 150 APHA max. USES: An intermediate in the production of epoxy reains (uaed in surface coatings, adhesive*, die-making, laminating, potting, en capsulating and as rigid foams); polycarbonate resins (used m heat-resistant, dimensionally stable, electrically-insulating films, moldings and fibers); oil-soluble phenolic resins; snd *a an oxidant for oils, greases and vinyl compoaitions. SHIPPING INFORMATION: Chemical* NOIBN. 50-lb bags. 0664971 A TOWOLDMONOQ43054 i dibutyl fumarate ORGANIC DIVISION- LITERATURE AVAILABLE MOLECULAR WEIGHT: 248 STANDARD TORM: Liquid. SI'TCI TICAT JONS: Acidity 0.20 meq 100 (trams max.; Color 40 APHA mux.; Crystallizing I'oiru - 2i.oC min.-. Moisture (KE in mrihnnol) 0.10% max.; Sjv Gr. 25s 25C. 0 982-0.98U. USES: Internal plnsliriring resin former for copolymerizing witli vinyl amato and vinyl chloride for adhesives, textile, paint and paper coatings Intermediate for chemical synthesis. SHIPPING INFORMATION: Resin I'lasticirer. -V,-gal.. 18-gauge steel drums with tight heads. 2-inch and %-inch openings in the head Gross weight. 498 lhi. Also tank cars or tank trucks 2.000-gal. minimum. DIBUTYL MALEATE ORGANIC DIVISION- LITERATURE AVAILABLE MOLECULAR WEIGHT: 248 STANDARD FORM: Liquid. SPECIFICATIONS: Acidity 0.12 meq'TOO grama max.; Color 10 Al'HA mux.; Moisture (KF in methanol) 0.15% max,; bp gr. 1.117 d o.oor.. USES: Internal plasticizing resin former for copolymerizing with vinyl acetate and vinyl chloride for adhesives, textile, paint and paper coatings. Intermediate for chemical synthesis. SHIPPING INFORMATION: Resins Plasticizer, 55-gal., 20-gauge ateol drums with tight heads 2-inch and % -inch openings in the head Groaa weight: 540 lbs. Also tank cars or tank trucka 2,000gal. minimum. DIOCTYL FUMARATE (DOF) ORGANIC DIVISION- LITERATURE AVAILABLE STANDARD FORM: Liquid SPECIFICATIONS: Acidity 0.20 meq/100 gms. max.; Color, APHA 75 max.; Moisture (KE in Methanol) 0.10% max.; sp. gr. 2.r*V25*C.. 0.937-0.940. PROPERTIES: Dioctyl Fumarate is a clear mobile liquid im- Portanl aa a monomer for polymerization and copolymecii&Uon. 'olymers varying in physical properties from hard Brittle resins to soft, internally plasticized elastic materials, can be made by various monomers ana adjusting reaction conditions USES: Copolymers of Dioctyt Fumarate with vinyl acetate, vinyl chloride, acrylic and styrene for aurface coatings, free films, syn thetic lubrication, pigment binders, paper coatings and floor waxes. SHIPPING INFORMATION: Resin Plasticizer. 55-gal, drums, gross 475 lbs.; tank cars and tank trucks. DIOCTYL MALEATE (DOM) ORGANIC DIVISION -LITERATURE AVAILABLE STANDARD FORM: Liquid SPECIFICATIONS: Acidi Al'HA 50 max.; Moisture 25/25C.. 0.940-0.943. Color >p. gr. PROPERTIES: Dioctyl Mateate ia a clear mobile liquid especially important aa a monomer for polymerization and eopolymerization. Polymers varying in physical properties from hard brittle resins to soft, internally plasticized elastic materials, can be made by using various monomers and adjusting reaction conditions. USES: Copolymers of Dioctyi Maleatea with vinyl acetate, vinyl chloride styrene and acrylate* are of special value in the following: surface coatings, free films; adhesive*; oil additive*; elastomers; paper coatings; and, pigment binder*. SHIPPING INFORMATION: Resin Plasticizer. 55-gal. drums. 475 lbs. gross; tank cars and tank trucks. EMA RESINS (Ethylene Meleic Anhydride Copolymers) INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Fine water-soluble powders available as both straight-chain and cross linked polymers in a variety of molecular weights. PROPERTIES AND PERFORMANCE CHARACTERISTICS: The KSiA resins are easily converted to the free-acid form; and to its sodium and amide-ammonium salts; and are readily reacted with alcohols and substituted alcohols and with amines to form esters and reams. Hy selecting the proper reactant, the following types of derivatives can be prepared: transparent film-formcra, polymeric liquids, waxy solids ana polyampholytes. SUGGESTED USES: Reneficiation agent for clays used in oil-wen drilling muds; stabilizers and thickeners in liquid detergent ana cosmetic formulations; thickeners for water-based latex paints, textile sizes, textile print pastes and binders; suspending agents for ink pigments, thickener for aqueous resin systems, adhesives, hinder for foundry cores, etc. SHIPPING INFORMATION: Multiwall bags (50 tbs) F- O R Texas City, Texas Rail and Truck, Sizing NOIBN. FUMARIC ACID, FOOD AND TECHNICAL GRADES See Pege 17 HBPA HYDROGENATED BISPHENOL A ORGANIC 01VISION -LITERATURE AVAILABLE MOLECULAR WEIGHT: 240 35 STANDARD FORM: Cast solid SPECIFICATIONS (TENTATIVE': f'olor 30% in Methanol u) APHA max ; Hydroxyl number 430 min , Ash 0.03% max , Ron 3 ppm max.; Moisture 0.3% max. USES: Alkyds and unsaturated polyesters to impart chemical CONTAINERS: Light-gauge metal cans SHIPPING INFORMATION: Chemicals NOIBN. MALEIC ANHYDRIDE See Pege 23 PHOSGARD C-22-R ORGANOPHOSPHORUS COMPOUND ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Viscous liquid SPECIFICATIONS: Appearance clear viscous liquid, fobm \PH \ 50 max.; Refractive Index 2SeC.. 1.492-1.494; Acidity u o'. meq g,,, max.; Chlorine 27% min. PROPERTIES: Phosgard C-22-R is a flame retardani organ..phosphorus compound with high efficiency through high ph,,ph,, rua and chlorine content, essentially non-volatile, exccllem eclnr stability on UV and heat exposure, long storage stahiliiy and good hydrolytic stability. USES: Phosgard C-22-R givea excellent flame rctardance in Ure thane foams, phenolics, polymethylmethacrylates, polyester reams and epoxiea. SHIPPING INFORMATION: Resin Plasticizer 55-gal drum*. 672 lbs gross; tank cars acid lank trucks. PHTHALIC ANHYDRIDE ORGANIC DIVISION MOLECULAR WEIGHT: 148.11 STANDARD FORM: White flakes or fused mass SPECIFICATIONS: Solubility in benzene (1 20) clear \-.ay 99.5% min.; C.P. 130.8C. min. USES: An intermediate in the production of alkyd and p.,lvi-t.r resins: dyestuffs; perfume bases; alcohol denaturantv i r..rri,. ceuticals; and plasticizers such as octyl phthalate. dihutyl pinu, nr dimethyl phthalate, diethyl phthalate and phthalyl glycol' iti-i SHIPPING INFORMATION: Phthalic Anhydride. 8011, bag.,, tank cars; tank truck*. RJ-100 AND RJ* 101 STYRENE ALLYL ALCOHOL COPOLYMER See Pege 46 STYRENE MONOMER See Pege 26 VINYL CHLORIDE MONOMER See Pege 26 FORMALDEHYDE RESINS RESIMENE MELAMINE AND RESIMENE UREA-FORMALDEHYDE RESINS See Pege 50 RESINOX PHENOL-FORMALDEHYDE RESINS See Pege 50 0684972 TOWOLDMONOQ43055 YWr*>*A*S**<`~ UREA, INDUSTRIAL GRADE UNCOATED PELLETS INORGANIC DIVISION STANDARD FORM: Urea pelleted form without coating agent. ANALYSIS: Nitrogen (Min.) Moisture (Man.) Biuret (Max.) 46.0% 5% 1.0% BSKS: Urea Formaldehyde resins for adhesives, plastics, paper and textiles, chemical intermediate, cosmetics, detergents, explosive stahilirer. paints, dentifrice, fermentation, finishes SHIPPING INFORMATION: Urea 80-lb rmiltiwall paper bags with polyethylene lining Also in hulk. PLASTICIZERS AROCLOR POLYCHLORINATED POLYPHENYLS Sta Piga 24 DI-2-ETHYIHEXYL ADIPATE (DOA) ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 370.56 STANDARD FORM: Liquid SPF.C1FICATIONS: Clear oily liquid; color APHA 25 max ; odor mild; acidity (as adipic acid) 0.02% max.; sp. gr. 0.024*0.003 at 2f)V25C. USES: A primary plasticizer which imperta excellent low tempera ture flexibility to polyvinyl chloride resins and synthetic rubbers. Used in conjunction with DOP and Santicizer 160 to make quality vinyl garden hose. Imparts low viscosity to vinyl plastiaols for cloth coating, wire coaling, etc. Imparls excellent heal and light liability and superior softness to vinyl film and upholstery. SHIPPING INFORMATION: Beain Plasticizer. 55 and 5-gal. drums; lank cars, lank trucks wherever possible. DI-2-ETHYLHEXYL PHTHALATE (DOP) ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 390.54 (Pure compound) STANDARD FORM: Liquid SPECIFICATIONS: Color APHA 25 max.; odor, very slight char acteristic; p. gr. 0.980-0.985 at 25/25C.; refractive index 1.4845 1.4858 at 25C.; acidity (as phthalic) 0.01% max. PROPERTIES: Dl (2-F.lhylHexyl) Phthalate (DOP) is the largest volume plasticizer consumed In polyvinyl-chloride resin. It imparls very good low temperature flexibility, low volatility and good heat and light atahility to a vinyl composition. It is often used with Sontieutr 141 to five a composition of improved light stability, resistance to embrittlement and aging, flame resistance and ease of processing. In vinyl electrical compositions. DOP imports excellent electrical characteristics with good aging properties. USES: This plasticizer is widely used in plasticizing polyvinyl chloride for electrical insulation. DOP is also compatible with moet of the other resins commonly used in the plastics Industry. It is an excellent general purpose plasticizer for use in vinyl plastics. It has been widoly used in such vinyl application* as shower curtains, aprons, rainwear, upholstery, draperies, garden boss and many others which require good flexibility and aging characteriatics. SHIPPING INFORMATION: Ream Plaaticizer. 55-gal. (445-lb.) and 5-gat. (40-lb.) black Iron drums; tank cars, tank trucks wherever possible. DI-N-OCTYL, N-DECYL ADIPATE (DNODA) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, clear oily liquid; color, APHA 50 max.; ap. gr. 25/25*C.. 0.914-0.922; refractive index, 26<1C.. 1.444-1.450; moisture, 0 10% max.; acidity, 0.35 meq/100 gma. PROPERTIES: DNODA is a primary plasticizer for polyvinyl chloride and imparts excellent low temperature flexibility and efficiency along with aoftneaa. superior hand and drape, permanence, water resistance, heat and light liability. It has the beat balance of pronertiea of all adipates and on a coat /performance basis is the first choice of all low temperature flexihilizing plasticizers USES: The major use of DNODA is as a low temperature flexihiliz ing. specialty plasticizer used with basic type esters, such as DOP. It finds widespread use in film, sheeting and coaled fabric. It will improve flexibility in garden hose and extrusion compounds and improve low temperature exposure characteristics of electrical jacketing formulae SHIPPING INFORMATION: Resin Plasticizer. 55-gal. (415-lb.) and 5-gal. (40-lb.) black iron drums; tank cars, tank trucks wherever possible. DI-N-OCTYL, N-DECYL PHTHALATE (DNODP) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS; Appearance, clear oily liquid; Acidity, as Phthalic, 0.01% max.; Color. APHA. 50 max ; Odor slight ester Refractive Index, (a, 25C., 1.4810-1.4840; sp. gr., 25' 25'C , 0.9680-0.9770. PROPERTIES: DNODP is widely used in PVC to impart superior low temperature flexibility and low processing vo'atility. It is miscible with most common solvents, thinner* and oils USES: This plasticizer is useful in imparting excellent cold tempera ture flexibility along with good heat and light stability in film and sheeting. It is widely used in 80C and 90C appliance wiring It imparts excellent flexibility to profile extrusions SHIPPING INFORMATION: Resin Plasticizer. 55-gal drums. 480-lb. gross; 5-gal. drums, 46-lbs. gro&s; tank truck and tank cars DIBUTYL PHTHALATE ORGANIC DIVISION --LITERATURE AVAILABLE MOLECULAR WEIGHT: 278.34 STANDARD FORM: Liquid. SPECIFICATIONS: Clear, oily liquid; color APHA 20 max.; odnr slight; acidity (as phthalic acid) 6.01% max.; sp. gr. 1.041-1 048 at 25.-25C.; refractive index 1.4895-1.4915 at 25C.; assay (ester content) 99% min.; sulfur (copper-strip teat) negative. USES: One of the moat widely used plasticizers for nitrocellulose and polyvinyl acetate; miscible with all the common organic solvents and with oils; soluble in water only to 0.001% at 30C ; excellent light atahility which permits its use in colorless, white or delicately tinted products. The stability of dibutyl phthalate and its high solvent power for most plastic materials make it one of the most acceptable plasticizers for general use in cellulosica and vinyl acetate SHIPPING INFORMATION: Dibutyl Phthalate 475-lb. steel drums; 40-lb. drums; tank cars; tank trucks. DICYCLOHEXYL PHTHALATE (DCHP) ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 330 STANDARD FORM: White granules. SPECIFICATIONS: Appearance, white granules; color of melt. 100 APHA max.; odor, moderate aromatic, alight phthalic; moisture in methanol, 0 1% maximum; melting point, 63C. minimum; acidity (as phthalic acid), 0.01% max.; eater content 99.0% nun PROPERTIES: Dicyclohexyl Phthalate is an excellent primary plaaticizer for ethyl cellulose, jyolyatyrene. acrylics and chlorinated rubber. It is partially compatible with cellulose acetate butyrate, polyvinyl butyral, polyvinyl chloride and incompatible with cellulose acetate. USES: This plaaticizer is widely used as s plaaticizer for nitro cellulose lacquer* where it contributes adhesion, oil resistance, heat testability and hardness It is also used in combination with liquid plasticizers for plasticizing polyvinyl acetate to make hcut sealing adhesive*. SHIPPING INFORMATION: Resin Plasticizer. 350-lb metal con tainers. DIETHYL PHTHALATE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 222.23 STANDARD FORM: Liquid. SPECIFICATIONS: Clear, water white oily liquid; Color, APHA 10 max.; Acidity (as Phthalic Acid) 0.01% max.; Odor, slight aromatic; Moisture, 0.16% msx, (KF in methanol); Specific Gravity, 1.117 * 0.005 at 25V25C. USES: A plasticizer for cellulose acetate for use in molding coin pound*. It gives improved properties in polyvinyl acetate for adhesive* ana aurfsce coating*. It imparts quick tack to polyvinyl emulsions. It ha* had FDA approval for use in food packaging for SHIPPING INFORMATION: Diethyl Phthalate. 55-gal . 20-gauge steel drum* with tight bead*, 2-incb and `4 -inch opening* in bend Gross weight 540-lb*. Also available in lank car* and trucks, 2.000-gal. minimum. DIISODECYL ADIPATE (DIDA) ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 426 67 STANDARD FORM: Liquid SPECIFICATIONS: Clear oily liquid; color APHA 50 max ; o. mild; acidity (aa adipic acid) 0.04% max.; ap gr. 0 916 3 0' at 25',25C.; moisture (by KF in methanol) 0.10% max. USES: A low volatile, low temperature plasticizer for polyvi chloride resins. It is similar to diocly) adipate in properne* impar to vinyls, but has the advantage of lower volatility I)n>ode adipate is an excellent coplasticizer with DIOP or DtDl* for vi plastiaols and organosols DIDA imparts very low initial visroto plastisols and a negligible increase in viscosity on storage SHIPPING INFORMATION: Resin Plasticizer 55 an.l 5-gal drums: tank cars, tank trucks wherever possible. 0684973 TOWOLDMONOQ43056 DIISODECYL PHTHALATE (DIDP) ORGANIC DIVISION - LITERATURE AVAILABLE MOl-ECULAR WEIGHT: 446.65 STANDARD FORM; Liquid. SPECIFICATIONS: Clear oily liquid: color APHA 50 max.; odor alight; acidity (aa phthalic acid) 0.01% max.; sp gr. 0.962 to 0.973 at 25/26'>C. USES: A general purpoec primary plasticizer for polyvinyl chloride being similar to dioclyl phthalate (DOP) but with lower volatility characterisiica and tuperior resistance to eoapy water extraction. Especially uaeful for wire compounds, floor tile and vinyl pleatisols where it imparls low initial viscosity and very little viscosity build* up on prolonged storage at elevated temperature* (40-50C.). For the electrical industry Monsanto offer* D1DP-E, a special grade of DIDP stahilired with 0 26% Bisphenol A for improved electrical characteristics snd retention of physical properties of heat aging. SHIPPING INFORMATION: Resin Plasticizer. 65 and 5*gal. drums, tank cars, tank trucks wherever possible. DIISOOCTYL PHTHALATE (DIOP) ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 390.55 STANDARD FORM: Liquid SPECIFICATIONS: Clear, oily liquid; color APHA 35 max.; odor light; acidity (aa phthalic acid) 0.10% max.; sp. gr. 0.930 to 0.985 at 26V6eC. USES; General purpose primary plasticizer for polyvinyl chloride, Uses similar to those for DOP. DIOP superior for vinyl organosols and plaatiaols having lower initial viscosity and lower viscosity build-up on storage than DOP. SHIPPING INFORMATION: Resin Plasticizer. 55 and 5-gal. drums; tank care, tank trucka wherever possible. DIMETHYL PHTHALATE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 194.18 STANDARD FORM: Liquid. SPECIFICATIONS: Clear, water-white oily liquid; color APHA not darker than 10; odor not more then slightly aromatic; acidity (as phthalic acid) 0.01% max.; sp. gr. 1.1900.001 at 25/259C.; refractive Index 1.5133 0.001 at 25*C.; aulfur (copper-strip test) negative. PROPERTIES: A solvent plasticizer for cellulose acetate: miscible with all common organic solvents snd with oils (except petroleum oils); solubility in water 0.4% st 32C.; excellent light stability; B.P. 282C.; crystallizing point 0C.; wt. per gal. 10 lb*. USES: Widely uacd in cellulose acetate molding compounds and polyvinyl acetate adhesives. Its metor use is primarily in the cellu lose acetate field where, as a general rule, it ia used in combination with diethyl phthalate or some other plasticizer. SHIPPING INFORMATION: Dimethyl Phthalate. 530 and 40-lb. steel drums. Tank cars and tank trucks wherever possible. DIPHENYL PHTHALATE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 318.31 STANDARD FORM: Fused solid. SPECIFICATIONS: Essentially white fused solid; free scid (as phthalic acid) 0.20% max ; free phenol 0.20% max. PROPERTIES: Crystallizing point approx. 69C.; readily soluble in ketones, esters and chlorinated hydrocarbons; solubility in alcohols, turpentine and linseed oil rather low, approx. 5.0 gm per 100 cc. of advent at 25*C.; completely Insoluble in water and gives increased water resistance to all compositions in which it is used. USES: Compatible with nitrocellulose and with the sulfonamide, phenolic, polystyrene and vinyl types of synthetic resins. In nitro cellulose lacquers produces hard coatings that have excellent gloss retention and weather resistance. Mixtures of diphenyl phthalate with either Santofite MS 80% or Santolite MHP Industrial Resins are excellent plasticizers for nitrocellulose in odorless, flexible, adhesive coatings. Especially recommended for vinyl resins, poly styrene, ethyl cellulose and some of the natural resins such as damar. SHIPPING INFORMATION: Resin Plasticizer. 400-lb. fiber drums. DITRIDECYL PHTHALATE (DTDP) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear oily liquid: Color, APHA 100 mai Specific gravity 0.948 to 0.955 at 25/26eC. Refractive Index s 25C. 1.4813 to 1.4850. Acidity as Phthalic Acid 0.015% max. USES: DTDP is a practically colorless liquid of low viscosity and excellent electrical properties. Its high boiling point assures low volatility. It ia widely used in wire compounds. It imparts excellent soapy water resistance and low volatility to film and aheeting. Its viscosity stability in plastisol application* ia excellent. DYTROL Punt brush preserver. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM; Liquid SPECIFICATIONS: Appearance, clear, oily liquid; color, APM\ 60 mai.; sp. gr. 25/26eC . 1 088-1.091; refractive index at 26>C . 1.507-1.510; moieture, 0.10% max. PROPERTIES: OytnA ia a non-volatile, non-flar mable. pleasant smelling liquid that possesses a strong softening ction on paints, lacquers, varnishes, etc. It is non-toxic and mi -ihle with most common solvents, thinners and oils. USES: The characteristics of Dytml xuggest* its use as a preservative for paint brushes. It is also useful as a reconditioner for paint brushes containing dried paint or for removing paint from the akin after a paint job. SHIPPING INFORMATION: Resin Plasticizer 55-gal. (495-lb) and 5-gal. (45-lb.) steel drums, tank trucks. HB-40 PARTIALLY HYDROGENATED TERPHENYL ORGANIC DIVISION- LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: A clear, mobile, high-boiling hydrocarbon, almost colorless, oily liquid with faint, pleasant odor; sp gr l 001-1 007 at 25/15.6eC.; wt. per gal. 8 37 (average); refractive index 1 VjOO1.5750 at 25C.; insoluble in water, miscible in all proportion* at room temperature with acverai solvents and oils USES: Low-cost, secondary plasticizer for vinyl sheeting, films and fabric or paper coatings. Plasticizer for vinyl protective coatings and adhesives. Used to plsstieize vinyl profile extrusions, tubing, wire coating and injection- and alusb-molding compounds Plasti cizer for atyrene-water dispersion paints, paper coatings, adhesives and styrene casting resins. SHIPPING INFORMATION: Resin Plasticizer Tank cars, 460 lb MOD-EPOX EPOXY RESIN MODIFIER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid (solid below TJ*F.) SPECIFICATIONS: Color. APHA 50 max.; neutralization number (mg. of KOH/gm.), 0.08 msx. PROPERTIES: Mod-Epox is a unique modifier for epoxy resins It reduces the viscosity of liquid epoxy resins, accelerates the cure, improves compressive yield strength, electrics! characteristics and adhesive characteristics. It does not adversely affect such important characteristics as hardness, solvent resistance or water remxt.tme Since Mod-Epox Is considerably lower in price than the epoxy resins the use of this product results in decreased costs USES: Afod-Epox is used in the tool and die industry, ele< ironic potting compounds, encapsulations, adhesives, surface coatings, body solder compounds and other applications being developed in epoxy resins. 8HJPPING INFORMATION: Chemicals NOIBN 56-gal (MO-lh , and 5-gal. (45-lb.) galvanized drums. MONTAR SYNTHETIC RESINS ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Resin. PROPERTIES: A series of rslsted brown-to-blerk following characteristics: Softening % ~ Point Cl CsO Montar 3 86-168C. 50-52 5-10 Montar 4 92-206C. 54-56 5-10 Montar 6 155-230C. 53-56 Montar 6 135-190'C. 59-61 Ke 0306 0 51 0 0 1-0 : 0 2-0 4 0 2-U 4 USES: Used primarily to impart fire resistance and to redu.e cost of resin formulations. SHIPPING INFORMATION: Cost Tar Resins Catch-weight SANTONOX ANTIOXIDANT See Pege 28 SANTONOX R ANTIOXIDANT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Solid. SPECIFICATIONS: Appearance, light colored crystalline m.iti-r,.,i ash 0.05% max.; malting point. 155C. min.; heat loss 1 /' n ,< PROPERTIES: Sontonox R is probably the heat .inti"i-t mi available for both high and low pressure polyethylene It ,.tr.-r ' ` same advantages as Santonox; hut, in addition, offera ih,- i i : 1 advantages of lower color, reduced odor, larger partule -i/e <n.| 10-15% greater efficiency. USES: Santonox R is used as an antioxidant for polyethylene h i... been approved by the FDA as an antioxidant in high pr.-H.-un- ... density) polyethylene t a 0.05% level for all uses except fan y l :* SHIPPING INFORMATION: Chemicals NOIBN. 1 -.0-11, m.-r container*. 0684974 TOWOLDMONOQ43057 SANTOWHITE POWDER See Pege 62 TRICRESYL PHOSPHATE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 368 36 STANDARD FORM: Liquid. SPECIFICATIONS: Clear, practically colorless liquid; sp. gr. 1.166 9.0.008 st 25V25aC.; acidity (as HiPO.) 0.01% max.; potas sium permanganate test, no change in 30 minutes. PROPERTIES: High boiling point; relatively non-volatile, evapo ration loss less than 0.10% in 100 hours at 100C Refractive index is approx 1.55G and 20C. Vmooaily increases rapidly at temper atures below normal; at approx. -35C. a solid tranaparent mass without crystalline structure. Miscible with all the common sol vents snd thinners, linseed, chinawood and castor oils; solubility in water less than 0.002% at 85aC., imparts good moisture resist ance to nitrocellulose films. The ortho isomer which is reputed to he the toxic element in normal tricresyl phosphate, has been virtu ally eliminated from Monsanto Tricresyl Phosphate thereby reduc ing toxicity dangers to a minimum and making tbe product more suitable for many applications. Elimination of the ortho isomer causes no impairment in plasticizing qualities. USER: The standard fire-retarding plasticizer for nitrocellulose and vinyls. SHIPPING INFORMATION: Resin Plasticizer. 530-lb and 45-lb. Heel drums; lank cars; tank trucks wherever possible. TRIPHENYL PHOSPHATE ORGANIC 0IVISION-LITERATURE AVAILABLE MOLECULAR WEICHT: 326.20 STANDARD FORM: Flakes. SPECIFICATIONS: Whits flakes, faintly aromatic; M.P. 48.5C. min start; permanganate test, no change In 30 minutes; acidity (as HiPO.), 0.003% mai. PROPERTIES: Miscible with the common solvents and thinners and with vegetable oils; solubility in water 0.001% at 34C.. 0.002% at 54C.; imparts some moisture resistance to celluloseacetate films. Retcntivity in cast cellulose-acetate films nearly 60% ; that is. it can be Incorporated In the proportion of 8-10 of acetate without separation and blooming. Imparla good flexibility and gives clear, tough compositions without tendency toward tackiness. One of its moet valuable properties la that of fire retarding. When used alone on cellulose-acetate films an amount of triphenyl phos phate equal to 20% of the cellulose-acetate weight produces films which will not support combustion. USER: Trinhenyl phosphate la primarily used as a flame retardant Claiticirer tor cellulosics. It also ia of interest in heat seating coatngs snd adhesive*. SHIPPING INFORMATION: Resin Plasticizer. 226-lb. fiber drums. TRIBUTYL PHOSPHATE (TBP) ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, clear 25V26C.. 0.973-0.979; Color, APHA 20 mmaox.b; ilAe cildiqituyid(;is'fr.P&o' 0.03% max.; Odor, characteristic eater; Moisture (Kr) 0 PROPERTIES: Tributyl Phosphate is a practically colorless liquid of low viscosity. It is a primary plasticizer and solvent for nitro cellulose, cellulose acetate and chlorinated rubbers. It is recom mended as an anti-foaming agent and high boiling solvent used in 2,4-D concentrstes and uranium recovery. USES: Anti-foamlng agent at 1% or leas in rubber-based paints and similar emulsion*. Solvent and blending agent for 2,4-D acid concentretee. SHIPPING INFORMATION: Resin Plasticizer. 55-gal. drums, 490 lbs. gross; 6-gal drums, 46 lbs. gross; tank trucks and tank cars. TRIBUTOXY ETHYL PHOSPHATE (TBEP) ORGANIC DIVISION-LITERATURE AVAILABLE 3TANDARD FORM: Liquid. SPECIFICATIONS: Appearance, clear mobile liquid; Odor, mild ester; Color, APHA 75 max., Acidity, as Acetic acid, 0.06% max.; Refractive Index (a. 25C., 1.4345-1.4438. Moisture (KF> 0.12% msx.; ip. gr. 20V20'C., 1.017-1.023. PROPERTIES: TBEP ia a colorless liquid plasticizer which is a strong solvent for moat resins, particularly cellulose acetate and polyvinyl acetate. USES: Plasticizer for leveling agent for self-polishing floor waxes. Offers flame retardance, but not a* good a* TCP. Imparts good low temperature flexibility to resins, SHIPPING INFORMATION: Resin Plasticizer. 55-gal. drums. 500 lbs. gross; 5-ga). drums, 46 lbs. gross; tank trucks and tank cars TRIPHENYL PHOSPHITE See Pege 33 54 SANTICIZER 140 PLASTICIZER See Pege 56 SANTICIZER 141 PLASTICIZER See Pege 56 SANTICIZER 160 PLASTICIZER Butyl Beniy/ Phthilete ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 312 36 STANDARD FORM: Liquid SPECIFICATIONS: Color APHA 40 max ; sp gr 1.113-1.121 at 25/25C.; acidity (as phthalic acid) 0 02% max. PROPERTIES: A clear oily liquid plasticizer having a alight characteristic odor. Give* good low temperature performance, possesses good heat and light stability and low volatility. USES: A relatively non-volatile plasticizer for polyvinyl chloride, polyvinyl chloride-acetate, polyvinyl butyrai, ethyl cellulose ami nitrocellulose. Superior to many other commonly used plasticizers in ita permanence, oil resistance, flexibility ,m I stability Because of its nigh plasticizing efficiency, it is of out-' snding value in in creasing output of processing equipment such as extruders and calenders Used successfully in vinyl organosols which are useful for coatings and films. An excellent plasticizer for polyvinyl butyrai and for low-molecular weight polystyrene, which ia further poly merized later for coating and impregnating work. The FDA has amended the following food regulations: {121 2511 Plasticizers in Polymeric Substances. {121.2514- Resinous snd Polymeric Coatings, {121.2520 -- Adhesives, {121 2526 - Resin ous and Polymeric Coatings for Paper and Paper Board {121.2569 -- Resinoue and Polymeric Coatings. Polyolefins, and {121 2671 Components of Paper and Paper Board in Contact With Dry Foods for the use of Butyl Benzyl PhthaJate in food packaging application*. SHIPPING- ^FORMATION: Reein Plaaticizer. 55-gal and S-gal drums; tanx cart; tank trucks. SANTICIZER 213 PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Sp. gr. 1.040-1.045 at 25/25*C.; acid value, 0.25 meq./lOO gma; color APHA 75 max. PROPERTIES: A clear, oily liquid with unusual properties in PVC, particularly in plastlsoli. USES: Low-eoat primary plasticizer for polyvinyl chloride. Santiciier 213 has tne unique ability to reduce "surface tack" of vinyl surfaces. It is of apecial value in plastisol formulations contributes low initial viscosity, slow viscosity build-up, and fast fusion in a single plasticizer. Santiciier 213 improve* mold release in plastisol molded vinyls. SHIPPING INFORMATION: Resin Plasticizer. T*nk cars, tank trucks; 55-gal. and 5-gal. drum*. SANTICIZER 214 PLASTICIZER See Pege 56 SANTICIZER 215 PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear, oily liquid, free of sediment or turbidity, color APHA 100 max.; acidity 0.12% max.; ap. gr. 0 974-0.96" at 25/25C. USES: Santiciier 215 l* a low-coat phthalate type eater designed for use in the electrical wiring field. It# primary use is in competi tive 60T, TW and NM applications It can also be used in semi rigid insulation and as the vinyl cover jacket in type NM wiring for home*. SHIPPING INFORMATION: Reein Plaaticizer. Tank care, tank trucks. SANTICIZER 218 PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS; Clear, oily liquid; color APHA 25 max.; acvUty 0.20 meq./lOO gma. max.; moisture 0.15% max.; refractive index 1.494-1.498 at 25'C.; ap. gr. 1.048-1.052 at 25a/25C. USES: Santiciier 218 ia an unusually effective plasticizer for gen eral purpose polyvinyl acetate emulsion adhesive* Economy plus euch properties as low viscosity build-up, good speed of set good film formation and more extensible film* are particularly ettra- tive to adhesives formulators. SHIPPING INFORMATION: Available in tank truck and tank car shipments. Also in 55 and S-gal. drum*. 0664975 TOWOLDMONOQ43058 lA SANTICIZER 262 PLASTICIZER Alkyl Beniyl Phihalate ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear, oily liquid; color APHA 100 max.; acidity 0.37 max.; moisture 0.15% max.; sp gr. 1.048-1.057 at 25"/25C.; Refractive index 1.519-1.523 at 25*C. OSES; A monomeric plasticizer offering high permanence, com parable to low molecular weight polymeries, and still retains the easy processing features of monomeric plasticizers in film and sheeting, coated fabrics, laminates, upholstery, plastisola, organosols and acrylic lacquers. SHIPPING INFORMATION: Resin Plasticizers; 5- and 55-gal. SANTICIZER 268 PLASTICIZER Phthelate ORGANIC DIVISION STANDARD FORM: Liquid. SPECIFICATIONS: Clear, oily liquid, acidity 0.35 meq'100 grams max.; color APHA 70 max.; moiature (KF in methanol) 0.15% max.; ip. gr. at 25/25C. 1.108-1.115; refractive index at 25C. 1.530-1.535. USES: Stain-resistant plasticizer for use in homogenous floor coverings. 8HIPPING INFORMATION: Resin Plasticizer. SANTICIZER 602 PLASTICIZER Isooctyl Isodtcyl Phthelate. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear, oily liquid; color APHA 50 max.; odor mild, acidity (as phthalic acid) 0.01% max.; ap. gr. 0.971-0.977 at 25/25C. USES: A primary plasticizer for polyvinyl chloride with lower volatility than dioctyl phthalate (DOP). Imparts lower initial viacoalty and lees viscosity build-up In plastisoU than DOP. Has excetleDt aoapy-water-exlractioo and alkali resistance. Used in vinyl floor tile, film and sheeting. SHIPPING INFORMATION: Reein Plasticizer. Tank cars; tank SANTICIZER 9 PLASTICIZER Mixture of ortho tnd pera Toluenasu/fonamides. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 171.21 STANDARD FORM: Fine granules. SPECIFICATIONS: Appearance, fine white to light cream colored particles; moiature, 1.0% max.; color (33H% by weight in acetone) APHA 85 max. PROPERTIES: Solubility quits low in coal-tar hydrocarbons and negligible in petroleum hydrocarbons: readily soluble in most other solvents, and in hot linseed, chinswood and castor oils; soluble in water only about 1.0% at 34C., but more soluble in alkali: least soluble Monsanto plasticizer in ethylene dichloride and benzene, solubility In ethylene dichloride approx. 4% , in benzene approx. 1.5% , each at 3oeC. USES: Santiciier 9 differs greatly from other plasticizers in its action. Relatively small amounts impart a gloss to polished articles, give smooth working and uniform curing of molded thermoectling products Blends readily with most synthetic resina, does not impart the softening action or liquid plasticizers. Particularly valuable to the makers of molding compositions. In some phenol-aldehyde reeins it appears to act not only as s lubricant, but also as a pro moter, giving more uniform and thorough curing. In amounts of about 20 parts per 100, baa a temporary plasticizing action on protein compounds, such as corn protein and soybean protein. In melamine coating and laminating reeins, Sonlieizer 9 promotes solution stability and compatibility, improves flowout during baking or curing, and increases Impact strength and abrasion resistance. SHIPPING INFORMATION: Resin Plasticizer, 250-lb fiber SANTICIZER 3 PLASTICIZER N-Ethytpt't-Tohient Sulfonamide. ORGANIC DIVISION-LITERATURE AVAILABLE Avsllsblt on Special Mtnjficturing only. MOLF.CULAR WEIGHT: 199.27 STANDARD FORM; Crystalline solid. SPECIFICATIONS: Practically White crystalline solid; C P 58.0C. min.; acidity (as acetic acid) 0.10% max.; moiature (by KF in methanol) 0.25% max. USES: Santiciier 3 is a solid, sulfonamide plasticizer. It has limited comnatability with commonly used resins but is widely used in combination with other plasticizers. Either in combination or alone it imparts high glosa. toughness and hardness It xbarpem the softening point of some thermoplastics, especially the cellulose esters. Its use makes possible such products as heat-sealing lacquer coatings and adhesives It is compatible with cellulose acetate to the extent of 50 parts per 100 parts of resin In addition to its effect on toughness and gloss, it improves the flow of molding compositons and lowers moisture permeability. It is about as compatible with polyvinyl formal as with cellulose acetate and its uae improves flow and imparls excellent gloee. SHIPPING INFORMATION: Resin Plasticizer 4001b jtocl SANTICIZER 8 PLASTICIZER Mixture of N-Ethyl-ortho- and para-Toluenesulfonamides. ORGANIC DIVISION-LITERATURE AVAILABLE Available on Special Manufacturing only. MOLECULAR WEIGHT: 199.27 STANDARD FORM: Liquid. SPECIFICATIONS: Light yellow, viscous liquid; odor slight characteristic; unsubstituted amide 9-13% acidity (as acetic a, ,(f, 0.80 meq/100 gtnt. max ; color of melt 200 Al'HA max. PROPERTIES: Readily miscible with all common organic solvents except the petroleum hydrocarbons in which it is only very slightly soluble. In water, soluble to approx. 0.13% at 23$C'., 0 21% at 48C.; solubility in water decreased by presence of ammonia but increased by other alkalies; soluble in castor oil. slightly soluble in cbinawood oil; insoluble in linseed oil; retentivity in cellulose acetate approx. 90 parts by weight to 100 of acetate, imparts a high degree of plasticity. A solvent for both nitrocellulose and cellulose acetate. USES: An excellent plasticizer for cellulose acetate, giving a bril liance and polish not obtainable with other plasticizers Being practically insoluble in petroleum hydrocarbons, is a valuable plasticizer for coatings designed to withstand gasoline and related products. Has some plasticizing action on such protein compounds aa casein, glue, soybean protein and corn protein May be used alone or in conjunction with other materials such as glycerine or similar compounds; greatly increases the flexibility of shellsc with considerable softening effect; also very useful with polyvinyl acetate adheeivee. Santiciier 8 it one of the boat plasticizers known for synthetic polyamides such as nylon and related reeins. SHIPPING INFORMATION: Reein Plasticizer. 530-lb. and 50-lb. SANTICIZER 1-H PLASTICIZER N-Cyctohexy! para- Toluanasulfonamide. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 253.36 STANDARD FORM; Yellow-brown fused mass SPECIFICATIONS: C-P. 82.5C. min.; moisture 0 15% max; color of melt APHA 300 max. PROPERTIES: Santiciier 1-H is a solid plasticizer which is rela tively light stable and of a low order of toxicity. It is soluble in alcohol, eaters, ketones, aromatic hydrocarbons and vegetable iU It is insoluble in water. It is compatible with a wide variety of reams including moat of the celluloeic and vinyl resins. USES: Santiciier 1-H is used in special crystallizing finishes, paper coatings, textile coatings and adhesives. It is a useful plasticizer m nitrocellulose lacquers, imparting a relatively sharp softening point It is also used to incorporate incompatible components surh as paraffin wax for producing special coating effects such as crystal lizing lacquers. For improved adhesion where flexibility in nitro cellulose is esquired. It la used in combination with dibulyl phihalate or Sonfieirer 160. It improves the moiature resistance or cellulose acetate and improves Aexibility. hardness and light stability of ethyl celluloee. It is compatible with and imparte good flexibility to shellac and kauri realn. SHIPPING INFORMATION: Ream Plasticizer. Approx 320 lbs fiber drums. SANTICIZER M-17 PLASTICIZER Methyl Phthelyl Ethyl Glycollete. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 266.24 STANDARD FORM: Liquid. SPECIFICATIONS: Color APHA 20 max ; sp gr 1 217 1 227 at 25V25"C.; acidity (aa acetic acid) 0.02% max ; odor, alight chararteristic; sulfur (copper-atrip test) negative. PROPERTIES: A solvent for both nitrocellulose and cellulose acetate; imparts a high degree of plasticity undiminished even in extremely tnin films exposed to air currents for a long time Very light-stable and may be used in transparent or tinted articles with out danger of yellowing. Readily miscible with other organic solvents; solubility in water 0.09% at 30"C . but imparts a con siderable degree of resistance to moisture penetration to both nitrocellulose and cellulose acetate film. USES; Probably the best cellulose acetate plasticizer available Dissolves Sontolite resins, and as both are very resistant to nc troleum products and compatible with to many film Cunning materials, they make an excellent combination for producing gasoline-resistant coatings. SHIPPING INFORMATION: Reein Plasticizer 550-lb steel drums; 5-gal. drums. Tank cars; tank trucks 0684976 TOWOLDMONOQ43059 SANTICIZER E-IB PLASTICIZER Ethyl Phthe/yl Ethyl Glfcollete ORGANIC OIV1SION- LITERATURE AVAILABLE MOLECULAR WEIGHT: 280.27 STANDARD FORM: Liquid SPECIFICATIONS: Color APHA 20 max., sp. gr. 1.180-1.18') at 26'25C.; acidity (as acetic acid) 0.01% max.; odor slight, auifur (copper-strip teat) negative. PROPERTIES: Miacilile with the common organic solvents except the petroleum hydrocarbons; when heated miscible with vegetable oils out partially separates on cooling; solubility in water 0.0175% it 30C. USES: Solvent for bolb nitrocellulose and cellulose acetate and for most resins. Light-fast; does not evaporate even from the thinnest films. With both cellulose acetste and nitrocellulose gives clear, tough, flexible films which have high resistance to ---nature pene tration. Highly recommended for use with cellul- cetate. Has been approved by Bureau of Animal Industry as < .toxic plasti cizer; may be used in cellulose-based lacquers for paper or in foils for food wrapping and packaging. SHIPPING INFORMATION: Resin Plasticizer. 535-lb. steel drums; 5-gal. drums; tank cars, tank wagons. SANTICIZER B-16 PLASTICIZER Butyl Phthelyl Butyl Glycollet. ORGANIC DIVISION- LITERATURE AVAILABLE MOLECULAR WEIGHT: 336 37 STANDARD FORM: Liquid SPECIFICATIONS: Color APHA 45 max.; sp. gr. 1.093-1.105 at 25/25C.; acidity (as acetic acid) 0.02% max.; esaentially odor less; sulfur (copper strip rest) negative. PROPERTIES: A practically colorleaa liquid plasticizer; B.P. 2196C. at 6 mm.; does not crystallize at temperatures as low as ~35C.; water solubility O.012% at 30C.; extremely lightstable; darkens on heating above 290C. USES: A widely used polyvinyl chloride plasticizer where a taste less and non-toxic composition is required: has complete FDA approval for use in vinyl food wrappings. Imparts good beat and light stability. Especially useful in beverage tubing, food packaging, hospital sheeting and anatomical restorations Solvent for nitro cellulose; compatible with moat reeins, imparling good flexibility. Miscible with castor, linseed and cbinawooa oils; somewhat retards gel formation in the latter on heating. An excellent plasticizer for chlorinated rubber, from 10 to 25 parts per 100 usually required. An exceptionally good plasticizer for polystyrene. Mixtures of Santiciter B-16 and Sonforife resins may be usca to plasticize casein and corn protein. SHIPPING INFORMATION: Resin Plasticizer. 500-lb. steel drums; 5-gal. drums; tank cars; tank wagons. SANTICIZER 140 PLASTICIZER Mixed C/esyl Phenyl Phosphete. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear mobile liquid; color APHA 40 max ; sp.gr. 1.203-1.213 at 25 '25C.; refractive index 1.550-1.570 at 25C.; acidity (aa HjPOi) 0.01% max.; moialure (by KF in metha nol) 0.15 max. PROPERTIES: An essentially odorless and colorless liquid plasti cizer; B.P. approx, 2586C. at 10 mm.; pour point -37C. approx. USES; Quite similar to tricreayl phosphate in that it imparls flame retardance, excellent permanence, ana chemical stability and equal heat and light stability; gives better low-temperature flexibility and abrasion resistance; la a stronger solvent and slightly, more efficient than (ricresyl phosphate. Can be used wherever tricresyl phosphate is used. Improved flexibility imparted by Santiciter 140 makes it preferable to tricreayl phosphate in many applications such as vinyl sheeting, lacquers and paper coating. Considerably more compatible lhan tricresyl phosphate with cellulose acetate. As a liquid, it is much easier to handle so it la often used in cellulose acelate, especially in conjunction with other active plasticizers Other resins with which it is useful are cellulose nitrate, ethyl cellulose, cellulose acetate-propionate, polyvinyl formal and poly vinyl butyral. SHILLING INFORMATION: Resin Plasticizer. 55-gal. and 5-gat drums; lank cars; tank trucks. SANTICIZER 141 PLASTICIZER Alkyl Aryl Phosphete. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid SPECIFICATIONS: Color APHA 40 max.; odor, slight character istic; sp. gr. 1.089-1.093 at 25 26C.; refractive index 1.507-1.510 at 25C ; acidity (as Hd'O.) 0.01% max.; moisture (by KF in methanol) 0.10% max. 56 PROPERTIES: Santiciter 141 combines into one compound th.non-flammability of tricresyl phosphate, and the elln inicy imi permanence of other vinyl plasticizers Imparts superior Iontemperature flexibility, improved abrasion and mrvs'uro resist,m e and good electrical properties. Gives excellent resistance to embrit tlement and deterioration to polyvinyl-chloride compositions ex posed to sunlight. USES: Excellent for use in polyvinyl chloride films, sheets, extru sions. moldings, organosols and plaslisols- in any application where an efficient, permanent, flame retardant plasticirer is re quired. Small amounts (5-7 PHIL considerably improve light stability of vinyl compounds. Especially recommended in flexible films for curtains, aprons, rainwear and hospital sheeting and m soft, pliable coatings for tablecloths, upholstery and drapery Suitable for use in products that touch the human body. Snnheuer 141 has FDA approval as a nontoxic plasticizer for food packaging SHIPPING INFORMATION: Resin Plasticizer. 55-gal and "- g.il steel drums; tank cars, tank wagons. SANTICIZER 148 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid PHYSICAL PROPERTIES: Clear oily liquid; Color APHA 30 max.; Odor: Slight, sweet; Acidity fmeq 100 g >: 0 02. max ; Moisture: 0.06% , max ; Refractive Index at 25C.: 1505, Specific Gravity at 25',25C\: 1.07. PROPERTIES: An alkyl diaryl phosphate with a pour point of -65C. a flash point of 437K and viscosities at 99C of 2.96 c and at 25C of 21.8 cs. Its weight per gallon is 8.9 lbs. USES: Santiciter 148 is a flexibilizing, Aame-relarding phosphate particularly useful as a plasticizer for polyvinyl chloride resins for use in wall coverings, film and sheeting and drapery backings It can also be used per se or in a gelled form as an air filter, dirt pick-up media which meets UL requirements for flame retardance and Bureau of Standards requirements for dirt pick-up. SANTICIZER 214 PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid SPECIFICATIONS: Color. APHA 100 max ; appearance, clear oily liquid, essentially free of suspended matter or turbidity, acidity 0.15 meq/100 gnu. max.; moisture (KF in methanol). 0 15% max ; refractive index at 25C., 1.481-1.486, sp. gr. 25/25C.. 0 948 0.956. PROPERTIES: Santiciter 214 is an unusual primary plasticizer for polyvinyl chloride. The initial plastisol viscosity of this material is very low. It allows formulators to produce a low viscosity formu lation which is harder than usual after curing. USES: Santiciter 214 imparts unique properties to polyvinyl chloride compounds. In proper concentration it gives the finished product a hard, tough surface, especially in vinyl coatings on metal SHIPPING INFORMATION: Resin Plasticizer. 55-gal (440-lh.i and 5-gal. (40-lb.) black iron drums; tank cars; tank trucks SANTICIZER 40B PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, clear oily liquid; Color 50 ml 50 ml, 95% ethanol, APHA 100 max.; Acidity, 1.0 meq. 100 gms . 1.0 max.; Odor, slight ester; Moisture (KF methanol) 0.15 max ; Specific Gravity, 25/25C., 1.128-1.132; Viscosity, 25'C. Dr135 ks. PROPERTIES: Santiciter 405 has unusually excellent permanen.e in three major vinyl application areas: migration resistance, ex traction resistance; and, low volatility. USES: Santiciter 405 is used to impart superior permanence m industrial tapes, vinyl upholstery, baby pants and electrical. ]05't' wire and cable insulation. SHIPPING INFORMATION: Resin Plasticizer. 55 gal 490 lbs drums, 5 gal., 44 lbs., drums, tank car and tank truck. SANTICIZER 409 PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS; Appearance, clear, viscous liquid, color of solution (50 ml.: 50 m 2-B alcohol), 100 APHA max ; moisture (by KF in metbsnol), 0.10 max ; odor, very faint ester sp gr 26/25C., 1.081-1.084; viscosity at 25C., 2900 to 3600 rks . acidity, 2.0 meq/100 gms. max. PROPERTIES: Santiciter 409 combines the ideal properties of several plasticizers for polyvinyl chloride in one primary polymeric Plasticizer. Santiciter 409 has low specific gravity, color and touniy 'olyvinyl chloride compositions plastioized with Santtcue' -t"' show excellent compatibility, excellent permanence, super eleetnc.il properties, fast fusion, good low-temperature flexibility, good beat and light stability and excellent retention of physical properties 0684977 TOWOLDMONOQ43060 USES: Because of it* excellent electrical properties. Santicizer 409 is especially useful in wire coatings and tapes. It is also widely used in high-quality flint and sheeting (adhesive backed), organosol fabric coatings, refrigerator gasketing and in other applications requiring s high degree of permanence and resistance to extraction. It is compatible with pol/vinyl chloride, ethyl cellulose, cellulose acetate-butyrate and Dilroeelluloec. SHIPPING INFORMATION: Resin Plasticizer. 55-gal. (450-lb.) and 5-gal. (45-lb.) steel drums; lank cars. SANTICIZER 411 PERMANENT PLASTICIZER ORGANIC DIVISION- LITERATURE AVAILABLE STANDARD FORM: Viscous, some solids on standing. SPECIFICATIONS; Color APHA 100 max. (50% ethanol solution); Acidity 1.0% max.; odor, slight characteristic; sp. gr. 1.104-1.110 at 259C. USES: Santicizer 411 is a low-cost permanent polymeric plasticizer with unusual resistance to solvent extraction and rubber migration. Sonlicirer 411 is designed for application in outerwear, baby pants, coated cloth (for automobile and furniture upholstery, etc ), wall covering, wire coatings, modified plastisols and organosols, vinylmetal laminates, and high density foam vinyl where its excellent rosiatsncc-to-cxtraction and rubber migration properties are required. SHIPPING INFORMATION: Reein Plasticizer. Tank cars, tank trucks, 55-gal. and 5-gal. drums. SANTICIZER 462 PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, clear oily liquid; Color, APHA 150 max ; Odor characteristic ester; Acidity meq'100 gms. 0.24%; Moisture (KK in Methanol) .15 max : Refractive Index (9. 256C., 1.507-1.610; ap. gr. 25e/25C., 1.073-1.076. PROPERTIES: Santicizer 4G2 ofTers excellent humidity com patibility, DOP-like processability, good plastisol viscosity, mini mum migration and low volatility. USES: Santicizer 462 finds excellent application in coatings for rubber saturated paper, for cloth coatings, foamed vinyl outerwear and general purpose unsupported film snd sheeting. SHIPPING INFORMATION: Resin Plasticizer. 55-gal. drums. 480 lbs. net; 5-gal. drums, 40 lbs. net; and lank cars and tank trucks. SANTICIZER 465 ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PHYSICAL PROPERTIES: Clear oily liquid; Color: APHA 100; Acidity: 0.08 mcq/100 g.; Moisture: 0.05% ; Refractive Index at 25C.: 1.523: sp. gr. 25/25aC.: 1.15; Viscosity at 100F.: 205 cs. and at 2)0eF.: 11.6 ca. PROPERTIES: A permanent plasticizer with especially low per se viscosity, a high degree of permanence and compatibility in various resins, especially PVC, and extremely processable. USES: For uso in permanent, essentially non-migrating and nonexlractahle PVC plastisol systems. Recommended for wall cover ings. glove dipping, film and sheeting, adhesive-backed film, elec trical tape, plastisol and PVAc adhesives. SANTICIZER 480 PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Appearance clear oily liquid; Acidity meq '100 gms , 0.60% ; Color APHA 125 max.; Moisture (KF in Methanol) .16% max.; p. gr. 26725,,C. 1.039-1.046. PROPERTIES: Santicizer 480 baa been designed to ofTer low cost permanence. USES: Santicizer 480 finds application in supported and unsup ported film and shooting, coated fabrics, foamed vinyl and wall coverings. SHIPPING INFORMATION: Resin Plasticizer. 65-gal. drums. 500 lbs. gross; 5-gal. drums, 45 lbs. gross; tank cars and tank trucks. SANTICIZER 481 PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Appearance, clear oily liquid; Acidity meq '100 gms., 0.857c max.; Color APHA 175 max.; Moisture (KF in Methanol) 0.157c max.; sp. gr. 250/25,'C. 1.072-1.078. PROPERTIES: Santicizer 481 has good extraction resistance, low cost and permanence comparable to Santicizer 409. U'SE9: Santicizer 481 has good electrical properties in 901' ir<insulation, high efficiency in film and sheeting am) e* 11 =>ii vinyl SHIPPING INFORMATION: Resin Plasticizer 55-gal drum*. 4'i lbs. gross, 5-gal drums. 45 lbs. gross and ta.il. cars and tank true** SANTICIZER 482 PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid SPECIFICATIONS: Appearance clear oily liquid Acidity men 100 gms 1.1 max.; Color. APHA 225 max ; Moistur.- K F in Methanol: 015% max.; sp. gr. 25 25C., 1.097-1 103 PROPERTIES: Santicizer 482 is designed to meet the permanem-e requirements of vinyl insulation. 105C wire and cable coatings It has overall good permanence. USES: Santicizer 482 finds good use in appliance wiring and in induatrial machinery wiring It has very low migration 10 rubber materials and nitrocellulose. SHIPPING INFORMATION: Resin Plasticizer. 55-gal drums, 490 ibs. gross, 5-gal. drums. 45 lbs. gross; and tank cars and Mnk SANTICIZER 483 PERMANENT PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid SPECIFICATIONS: Appearance clear oily liquid; Acidity meq 100 gms. 0.24 max.; Color APHA 125 max.; Moisture (KF in Methanol) 0.15% max.; sp. gr. 25a/256C., 1.045-1.052. PROPERTIES: Santicizer 483 is a permanent plasticizer designed for plastisol*. It has a low "per se" viscosity, low initial viscosity and low viscosity build-up for long shelf life. USES: Santicizer 483 has excellent application in plastisol coated paper and fabrics. SHIPPING INFORMATION: Resin Plasticizer. 55-gal drums VO lbs. gross; 5-gal. drums. 45 Ibs. gross; snd tank cars and lank tru.-k* SANTICIZER 630 MODIFIED-PHTHALATE PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Color, APHA 70 max.; acidity. 0 12 meq I do gms. max.; moisture (by KF in methanol), 0.10% max , refractive index at 259C., 1.5095-1.6160; sp. gr. 25V25C.. 0.987-0 994 PROPERTIES: Santicizer 630 is a iow coat, primary ptastm/er for polyvinyl chloride plastics. In some characteristics Santicizer 1; in 1* superior to Dioctyl Phthalate especially in migration resistance m nitrocellulose and in plastisol-viscosity stability. Since thin nnicr il is much more volatile than Dioctyl Phthalate, it is nut ......... mended for applications where permenence is essential. USES: Santicizer 630 is useful in formulating vinyl (l.i-t extrusions, costings or sheeting compounds It imparls u> vinyl compounds properties comparable to those imparted by IX)I'. hut it coats less. SHIPPING INFORMATION: Resin Plasticizer Tank trucks md tank cars only. SANTICIZER 631 MODIFIED-PHTHALATE PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Color APHA 40 mm.; acidity. 0 12 -m-.( ; gma.. max.; moisture (by KF in methanol). 0.10% max r-fr <- :-. index at 25C.. 1.4990-1.5045; sp. gr. 2S/2SC., 0 984-0 'mo PROPERTIES; Santicizer 631 Is a low coat, primary ph-ti. n r for polyvinyl chloride plastics. It offers a unique bslan.o f - vereus performance in this resin. Santicizer 631 is belter 11n 1 o in migration resistance to nitrocellulose and in plasiix l v * stability. USES: Santicizer 631 is useful in formulating vinyl pii-'-.extruaions, coatings or sheeting compounds. It impart* r rto PVC compounds in the range of those imparted by !>' >1' 1 used when cost is a decisive factor. It lies between San.o ............. and DOP in price versus performance SHIPPING INFORMATION: Resin Plasticizer. Tank ir... k. .. : tank cars only. SANTICIZER 636 2-Ethythtxy! Isodecyl Phthtfote ORGANIC OlVISlON-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Color. APHA 75 max ; aridity, n 12 gms max.; moisture (by Karl Fischer). 0 105 max r.:index at 25C., 1.478-1.488; ip gr. 25 25C.. 0.909-0 y* 0684976 TOWOLDMONOQ43061 PROPERTIES: Santicittr 636 I* practically colorless. highbollinj liquid of low viacoaity and excellent electrical properties It U mlacible with moet common aolventa, thinner# and oil#. Santicittr 636 combine# food low temperature properties, food resistance to mlrratioD and to water attraction, ana eicelleot heat and light ejaoility. USES: Santicittr 636 la especially useful in plaatiaol* where it offert lower viecoeity build-up on aging than does Dioctyl Phthalate. It ia alao uaefut in electrical compound* where the higher molecular weight and lower volatility reeult In improved permanence of theee product* In end application*. SHIPPING INFORMATION: Reein Plasticizer. Tank truck* and tank car* only. SANTICIZER 644 PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Clear, oily liauid. free of eodiment or turbidity; color APHA 50 max.: acidity 0.35 meq/100 grama, max.; ep. gr. 0.917-0.922 at 25/25'C. USES: Santicittr 644 i* a primary plaaticizer for PVC and other resin* to which it impart* excellent low temperature flexibility. lie uac assures low volatility, excellent efficiency and euperior flexibility. Santicittr 644 ofTere low initial viacoaity and excellent viscosity atebility in plaatiaol*. Sontici'rer 644 is predominately used in vinyl film, aborting and coated fabric to impart flexibility without aacriBeing volatility or efficiency. Plutlaola widely use Santicittr 644 to frovlde excellent viscosity characteristic* along with improved uaion characteristics. SHIPPING INFORMATION: Reein Plasticizer. Tank cars, tank truck*; 65-gal. and 5-gal. drums. SANTICIZER 683 PLASTICIZER ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear oily liquid free of sediment or turbidity; color APHA 40 max.; acidity 0.12 meq/100 fins, raai.; *p. gr. 0.975-0.981 at 25*/25C. USES; Santicittr 683 l* a modified phthatate eater. It is offered a* a low-coet primary plasticizer for polyvinyl chloride. Id some characteristics it ia superior to DOP. It u particularly good in plnstisol* because of low initial viacoaity and viscosity stability imparled. Reeistance to N/C migration is excellent. Santieiitr 683 is used in compounding vinyl plastisola. extrusions, coating*, film and sheeting. SHIPPING INFORMATION: Reein Plaaticizer. Tank care, tank 8ANTOLITE MHP RESINS $t Ptgtt 28-50 SANTOLITE MS 80% Industritl Ptsin $tt Ptgt 50 HB-40 PARTIALLY HYDROGENATED TERPHENYL Stt Ptgt 53 PACKAGING PLASTIC BOTTLES AND CONTAINERS PACKAGING DIVISION TYPE: Blow molded thermoformed container*. . STOCK: High and low density polyethylene available In stock shaped container* CUSTOM: Custom designed containers to meet specific market requirements can be produced in an unlimited number of shapes. Dependent upon the specific need*, these custom containers can be made from polyethylene (high or low density), polypropylene, atyrene, nylon, vinyl (rigid and flexible), acetal and many other thermoplastics. SIZE: 5cc capacity to 15 gallons. USES: Safe, lightweight container* for a wide variety of consumer end Industrial products. PLASTIC CLOSURES PACKAGING DIVISION _ TYPE: Injection molded GENERAL INFORMATION: Theee closures ere available in a variety of sizes as companion pieces to many plastic containers. 58 PLASTIC FITMENTS PACKAGING DIVISION - TYPE: Injection molded. STOCK: Variety of fitments for plastic container* for dispensing liquids or powders in drop, apray, aquirt, shake or pour form. CUSTOM: Fitments can be designed to meet specific dispensing requirements. PLASTIC FOOD TUBS PACKAGING DIVISION DESCRIPTION: Plastic cottage chccae. salad and dip containers 8, 12, 16, 16 tali, 32 reg., 32 aquat or sizes Clear and opaque lid* are available. Margarine tuba: H lb. soft margarine containers. Made of apeciaily formulated plastic resin to give e high-gloss, high-impact, table-ready container. Food tubs ana lids are available with printing to specification. Literature available on the cottage cheese tubs. PLASTIC MEAT TRAYS (CLEAR) PACKAGING DIVISION-LITERATURE AVAILABLE DESCRIPTION: Clear meat traye from Polyflex film Industry Number IS 2S 4S 8S 93 103 123 133 163 173 Tray Size Inches (Approx.) 5x5xH 8 i 5H 9x7x H W i 7 H 12 x 9 x H 1014 x 54 x H 10H x 4 i H 10K x 4 x K 12x7 x H' 8x 4x 8 I et,' x H Per Case 1.000 1,000 1,000 1,000 500 1,000 500 1,000 500 1,000 1.000 An innovation in meat packaging, the new clear plastic trays allow the consumer to examine all sides of the meat, offer freezer-ready packaging and will fit moet wrapping equipment. PLASTIC VENDING CUPS PACKAGING DIVISION-LITERATURE AVAILABLE DESCRIPTION: Plastic vending cups. 7 oz. bot drink cups 8)4 oz. bot drink cup* 7 oz. insulated bot drink cups 7 oz. cold cup# 9 oz. cold drink cup* (translucent) Packed 2,000 to a case END USE: Designed to fit end vend from any major bot or cold drink vending machine. GER-PAK SHEETING PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE DESCRIPTION: Low density polyethylene, in itock roll* up to 100 feet long. Longer lengths, colors and special embossing available. END USB: Covering equipment, dust partitions, temporary glazing. , GAUGES: Any tblcknee* from .001' to .010', In width* up to 40 feet. GER-PAK TAPE PLASTIC PRODUCTS AND RESINS DIVISION DESCRIPTION: Pressure sensitive polyethylene tape with preslit paper backing. In cutter edge dispenser. END USES: Patching, sealing, closing plastic end paper bag* or liner*. SIZE: .004' gauge, 2* wide and 100' long, clear or black MONSANTO BAGS AND LINERS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE DESCRIPTION: Low density polyethylene bags and liner*, avail able either individually or in continuous rolls of Hand-E-Holl film serrated for easy detachment. END USES: Packaging bulk chemical, lining boxes, cans or drums, protection against water damage. GAUGES AND SIZES: Thickneaeee from 001' to .010'. in width* up to 56* flat face, with or without guaaeta Lengths to 114 inrhn 0684979 : TOWOLDMONOQ43062 POLYFLEX SHEET PACKAGING DIVISION-LITERATURE AVAILABLE DESCRIPTION: Biaxially oriented polystyrene sheet available in rolls. Types End Usee Code 0116 (thermofolding grade) gauges .00275* and .00475*. Document protectors, wallet inserts. Code 0401 (thermoforming grade) clear and color In gauges .005", .0075*, .010*. .0125*. .015" controlled monomer. Trays and inner packages for food products. Code 0404 (thermoforming grade) clear in gauge* ,00i*, .0075*. .010*. .0125*. .015*. and .020* controlled monomer. Trays and inner packages for highly sensitive foods. POLYFLEX FILM PACKAGING DIVISION-LITERATURE AVAILABLE PACKAGING GRADE FILM: Code 0301. Gauges .001*, .00125*, .0015*, .002*. Available on rolls. DESCRIPTION) Biaiially oriented polystyrene, crystal clear, excellent dimensional stability, heat sealable, heat shrinkable and "breathing" characteristics neceesary for packaging fresh produce. VUEPAK CELLULOSE ACETATE SHEET PACKAGING DIVISION DESCRIPTION: Transparent, rigid packaging material available in rolls and sheets in gauges .005*. .0075*. .010*. .015* and .020*. END USES: Fabricated display packages, signs, document protectors. ASTROTURF RECREATIONAL SURFACES AstroTurf recreational surfaces are a aeries of all-weather, nylon surface* engineered for a variety of recreational uses. They have been designed for multi-use, durable performance, and safe traction. GOLF CHAMPIONSHIP GREEN SURFACE NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: This product is composed of a nylon pile surface of green, grass-like blade* bonded to an energy-absorbing foam pad. It ia placed directly over a smooth stabilized subsurface. The aystem weigh* about l-lb./aq. ft. and la about 1 in. thick. Supplied In roll goods approximately 14 ft. 4 in. wide and typical average lengths of 100 ft. Seaming and installation techniques permit coverage of any size or shape greens. USES: Durable, permanent golf greens engineered for proper ball reaction. For use on championship courses or for private home installations. GOLF PRACTICE PUTTING GREEN SURFACE NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: Thl* product 1* composed of a pile surface having a pile of green nylon grass-like blades. There Is a portable putting surface available which has a foam backing. Portable installations msy be placed on any suitable smooth surface, such as compacted dirt, grata, concrete, or asphalt, or on a smooth hard urfBce in the home. For permanent installations, the surface is placed directly over a smooth stabilized eubeurface. A variety of ires and shapes are available from stock or any aize or shape green to individual requirements can be made from roll goods approxi mately 14 ft. 4 in. wide. USES: Outdoor or indoor permanent or portable practice putting greens or golf strips This surface is intended for putting only and ia not used lor driving or chipping. A practice green for home, club, motel. Institution, apartment house or Industrial area. GOLF TEE SURFACE NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: This product is composed of a nylon pile surface of green, grass-like blades bonded to a foam pad I'ermanent installations require an engineered stabilised sub-surface USES; Outdoor permanent golf tees with long lasting properties far surpassing those of a normal grass green LAWN SURFACE NEW ENTERPRISE DIVISION- LITERATURE AVAILABLE STANDARD FORM; This product consists of a nylon surface pile of green, grass like blades. The product weigh* about >j lb *q ft ana ia about '4 in. thick. Supplied in roll goods 14ft 4 in wide and typical average length of 100 It. Seaming and installation techniques permit coverage of areas of any sire or shape USES: General landscaping and lawn uses Excellent for decks, patios and lawns. MULTI-PURPOSE SURFACE NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: This product is composed of a nylon pile surface of green, grass-like blades bonded to a foam pad 1 he complete system weighs about '-i lb. sq.ft and ia about') in thick. A smooth stabilized subsurface is required Supplied in roll goods approximately 14 ft. 6 in. wide and typical average lengths nf 100 ft. Seaming and installation techniques permit coverage of areas of any aize or shape. USES: Broad utility in a multitude of outdoor and indoor recrea tional activities. Ideal for field houses, gymnasiums, track mai.il lations, pool and patio areas, entrance systems, locker rooms, golf cart paths, etc. The perfect surface for school, motel, apartment house, industrial area aDd institution. PLAYGROUND SAFETY SURFACES NEW ENTERPRISE DIVISION-LITERATURE AVAILABLE STANDARD FORM: This product is a surface system rompon-d of a nylon pile of green grass like blades, foam pad. and filwr pad underlay to yield a durable surface with superior shoc k absorbing properties. Tne complete system weighs about 1lbs mi fi ami is about 1 in. thick. A smooth stable subaurfare is required Supplied in roll good* approximately 14 ft. 6 in. wide and typical average lengths of 100 ft. Seaming and installation technique* permit over age of areas of any size or shape USES: System engineered for outdoor or Indoor safely playing surface with excellent foot traction under wet or dry condition*, combined with superior cushioning properties for maximum safety STADIUM (ATHLETIC FIELD) SURFACE NEW ENTERPRISE DIVISION STANDARD FORM: This product ia composed of a nylon pile surface of green, graas-like blades, foam pad. and fiber pad underlay carefully engineered to give a durahle playing surface for top-flight competition. A smooth stabilized subsurface ia required Supplied in rotl goods approximately 14 ft. 6 in. wide and typical average lengt h of 100 ft. Seaming ana installation techniques permit coverage of area* of any size or ahape. USES: The stadium grade offers the ultimate playing turf.icp for outdoor or indoor competitive sport* and has been proven in high school, college, and professional aervice in installation* throughout the country. The product is designed for use in football baseball, soccer, lacrosse, field hockey, rugby, hurling, cricket, and *ofihall Ueed in professional, college ana school stadia Also nractne and intra-mural 6eld. Engineered for superior traction with the proper shoes, safety qualities sod multi-use. TENNIS SURFACE NEW ENTERPRISE 0IVISI0N-LITERATURE AVAILABLE STANDARD FORM: This product is baaed on a pile of gm-n nylon Eraas-like blade* in a polyester backing fabric underinati-d with itex. In the portable version, the pile surface is bonded tn a poly vinyl chloride foam pad and may be laid over any suitable *.... mb surface, such as wood, compacted dirt, concrete or aspb.ili tins product weighs about H-lb.7aq. ft. and is about'i in thic k Ini lie permanent version, the pile surface is laid directly over a `month atabilized subsurface; this product weighs about si lt> *<: ft mil is about K -inch thick. Supplied in roll goods approximately 1 t it 6 in. wide and typical average length of 120 ft Seaming .m I .rut il lation techniques permit coverage of areas of any size or shape USES: Indoor or outdoor, permanent or portable tennu* ,.i*n bowling. 0664980 TOWOLDMONOQ43063 At ,*. -> w.- ^ a -^a-A., Aia^, _jr. ..r-:-' ft .-aBfctfcteJs . RUBBER CHEMICALS ACCELERATORS FOR NATURAL AND SYNTHETIC RUBBERS ORGANIC DIVISION THIAZOLE TYPE EL-SIXTY 1, 3-bis (2-baniothiaiolylmercaptomelhyl) urea ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: {Treated to reduce dusting). Appearance and condition- buff powder; agh~ 0.5% max.; fineness (200 mesh) -- 0.5% max. retained; heat loss 0.5% max.; melting point-- 220C. min.; dedusting agent- 5.01.6%; gp. gr- 1.38 at 25C. USES: Vulcanisation accelerator for natural and synthetic rubbers. Msy be used alone but. for beet results, an activator is usually desirable. Gives excellent processing and curing characteristics to many typos of compound*. Effective in compounds containing high loads or retarding pigments such as clay. 8HIPPING INFORMATION: Rubber Accelerator, NOIBN. SANT0CURE N-cyctohexyl-2-bemothiaiolesui/enamide. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition- light tan or buff pellet# or powder; ash- 6.5% max.; 6neneae (20 mesh)--trace max. retained, melting point-- 94eC. min.; moisture 1% max.; ether insoluble* 5.0% max. when shipped; ip. gr.- 1.27 at 25CUSES; Delayed action vulcanization accelerator for natural and synthetic rubbers. Activators are sometimes desirable but not always needed. Exceptionally safe at processing temperatures but powerful at curing temperatures. Give high modulus and tensile. SHIPPING INFORMATION: Rubber Accelerator. NOIBN. SANTOCURE 26 2-(2.6-dimethyl-4-morpholinothio beniolhinole) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, light tan or buff powder or pclleta; ash 0.6% max.; fineness (10 mesh) trace max. retained; melting point 946C. min.; moisture 0.6% max.; ether insolubles 2.0% max. when produced; gp. gr. 1.24-1.30 at 25C. USES: Delayed action vulcanization accelerator for natural and synthetic rubbers. Activators are sometimes desirable but not always needed. Exceptionally safe at processing temperatures but powerful at curing temperatures. Gives high modulus snd tensile. SHIPPING INFORMATION: Rubber Accelerator. NOIBN. SANTOCURE MOR 2 (morphoiinothio) beniothiaiole ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, buff to brown flakes; ash, 0.6% max.; melting point, 80'C. min.; moisture. 0.5% max.; ether insolubles. 1.0% max. when shipped; specific gravity (approx.) 1.34 at 25#C. USES: Sunfocure MOR is used in the same way as the other SorUocure products and responds in much the same manner to secondary accelerators. In most applications, its delayed action appears to He between Santocur< NS and Santoeurt 26. SHIPPING INFORMATION: Rubber Accelerator. NOIBN. SANTOCURE MOR-90 Blend of SANTOCURE MOR and Tbiofide ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS; Appearance, light buff to brown flakes; ash. 0.5% max ; moisture, 0.5% max.; ether insolubles. 12% max. when shipped; crystallizing point. 70C. min.; specific gravity (approx.) 1,36 at 2.6C. . USES: Vulcanization accelerator for natural and synthetic rubbers. SHIPPING INFORMATION: Rubber Accelerator, NOIBN 60 SANTOCURE NS N-tart-butyl-2-beniothiaiolesulfanamide ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, light tan or buff powder or pellets; ash 0.5% max ; fineness (20 meshi trace m.n retained; melting point 104C min.; moisture 0.5% max ; ether insolubles 1% max. (when shipped); sp. gr. 1.26-1.32 at -'VC USF.9: Delayed action vulcanization accelerator for natural and synthetic rubbers. Santocur* NS is used in the same way and for the same purposes as Sonfocure. It provides even gre.iter delayed action. Santoeurt NS is a little stronger than Santoeurt and it m customary to reduce the dosage by about 10% when making the substitution. SHIPPING INFORMATION: Rubber Accelerator. NOIHN THIOFIDE MBTS 2.2'-diihiobis /beniothiaiole). also called beniolhiaiy! disulfide and 2.2' dibenioihieiyl disulfide ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition- cream powder; ash--0.5% max.; fineness (100 mesh)- 0.1% max retained, melting point-- 168C. min.; moisture 0.5% max.; petroleum ether extractable 6.51.5% ; sp. gr.--1.54 at 26C. USF.8: Vulcanization accelerator for natural and synthetic rubbers An activator is usually desirable. Safe handling when properly activated. Can be used successfully in a wide variety of slocks Thiofide is treated to reduce dusting and aid dispersion. SHIPPING INFORMATION: Rubber Accelerator, NOIHN THIOTAX* MBT 2-merceptobenioihieiola. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, cream to light yellow powder; ash 0.5% max.; assay {MBT content) 91% mm ; fineness (100 mesh) trace max. retained; melting point 170C mm.; dedusting agent 2.0-4.5% ; moisture 0.5% max.; sp gr. 150 at 25C. USES: Vulcanization accelerator for natural and synthetic rubbers. An activator is not needed but is often desirable. Activator must be adiuated carefully to avoid scorch difficulties. Thiolax is treated to reduce dusting and dispersion. SHIPPING INFORMATION: Rubber Accelerator, NOIBN. ALDEHYDE AMINE TYPE A-32* Reaction product of butyraidahyda and butylidana aniline ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Apj>earance aod condition red-yellow to orange liquid, may be faintly turbid: moisture no liquid sepa ration on standing; ap. gr.-- 1.01 at 25iC. USE9: Vulcanization accelerator for natural and synthetic rubber*. Used mostly for hard rubber. SHIPPING INFORMATION: Rubber Accelerator. NOIBN. A-100* Reaction product of butyraidahyda. acetaldehyde and aniline. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition- dark, red brown oily liquid; moiature no liquid separation on standing, sp gr 1.01 at 259C. USES: Vulcanization accelerator for natural and synthetic rubbers Used mostly for hard rubber. SHIPPING INFORMATION: Rubber Accelerator, NOIBN. ULTRA TYPE METHASAN {Zinc Dimethylidithiocerbemate) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition- white powder, ash, 25-26% weight; fineness (200 mesh)- 0.5% max retained, heat loss. (2 hrs. (a 100C) 0.5% max.; melting point 248V mini mum; specific gravity ((a* 25tlC) approx. 1.66. USES: As a secondary accelerator for Thiofide and Saniocure Exceptionally effective at low concentrations. SHIPPING INFORMATION: Rubber Accelerator, NOIBN 0664901 d TOWOLDMONOQ43064 MONO THIURAD Bis(dimtlbyl{hiocibamy!)soHida, also called tatramathylthiurem monosulfide. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: (Standard Powder). Appearance and con dition--lemon yellow powder, aah--0.5% max.; fineneaa (200 meebi--1% max. retained, (100 meah)--trace max. retained; melting point--103C. min.; moiature--0.5% max.; ap. gr.~l.39 at 258C. VISES: Vulcanization accelerator for natural and synthetic rubbers. Available in oiled and unoiled powder and pellet form. SHIPPING INFORMATION; Rubber Accelerator. NOIBN. R-2* CRYSTALS Reaction product of carbon disulfide and t.t'-mathy/anadipiparidine. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, gray white pellets; melting point 68*C. min.; ap. gr. 1.22 at 25C. VISES: Vulcanisation accelerator for natural and synthetic rubber*. Used mostly in cements and latex. - 8HIPPINQ INFORMATION: Rubber Accelerator, NOIBN. nz-ioo* (N.N-dimathytcyctohexemine tilt of dibutyldithiocarbamic acid) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance aod condition--up to H' yellow orange lumpe; aaeay (by Ni), 98,0% minimum; crystallizing point, "C, 52.6 minimum. USES; Very faat accelerator for curing at room or slightly elevated temperature. SHIPPING INFORMATION: Rubber Accelerator, NOIBN. THIURAD Bis(dimathylthlocarbamyl)disulfida; alto callad tatramathylthiurem disulfide. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: (Standard Powder) Appearance and condition --light buff to white powder; aah--0.5% max.: fineneaa (100 mean)--trace max. retained; melting point-- 144*C. min.; heat loan--0,6% max.; ap. gr.--1.41 at 25*C. VISES: Sulfur bearing vulcanization accelerator for natural and synthetic rubbers. Available In oiled and unolled powder form and pellet form. SHIPPING INFORMATION: Rubber Accelerator, NOIBN. ACCELERATOR B* Additive ORGANIC OlVISlON--LITERATURE AVAILABLE SPECIFICATIONS: Accelerator B is a physical blend of 2 parte Thiurod and 1 part Thiotox. Thiurod ana ThioUut accelerators are commonly used In this ratio as accelerator* for butyl. Monsanto Rre-blends the two compounds, offering the 2:1 mix as a convenience >r the user. SHIPPING INFORMATION: Rubber Accelerator, NOIBN. GUANIDINE TYPE DPG Diphanylguanidina. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, pinkish-white powder; aah 0.3% max.: fineneaa (100 mesh) trace max. retained; melting point 146C. min.: heat loee 0.6% max.; dedusting agent 1.0 3.0% ; ap. gr. 1.20 at &5C. USES: Vulcanization accelerator for natural and eynthetic rubbers. Used mostly as a secondary for thiazolee. DPG is treated to reduce duating and aid dispersion. SHIPPING INFORMATION: Rubber Accelerator, NOIBN. GUANTAL Diphenylgutnldina phthatita. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--white powder; aah--C-3% max.; fineness (200 meah)--0.5% max. retained; melting point--178C. min.; heat lose--3.5% max.; *p. gr.--1.20 at 25C. USES: Vulcanization accelerator for natural and aynthetic rubbers. Used mostly sa s secondary for thiaxoles. . SHIPPING INFORMATION: Rubber Accelerator. NOIBN. THIOCARBANILIDE TYPE A-1 * THIOCARBANILIDE Also called 1,3-diphynyi 2- thiourea and K.N'-diphenylthiourea. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition- gray powder, aah--0.5% max.; fineneaa (100 mesh)-- trace max. retained; melting point--148C. min.; heat loaa- 0.75% max.; ap. gr -- ! 32 at 2.VC USES: Vulcanization accelerator for natural and aynthetic rub bers--special application*. SHIPPING INFORMATION: Chemical* NOIBN ANTIOXIDANTS AND ANTIOZONANTS FLECTOL H polymerized l,2-dihydro-2.2.4 inmalhylquinoline. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearancs and condition, brown powder or flakes; ash --0.5% max.; fineneaa: powder-200 meah 0.5% max. retained, fiakee-40 meah 90.0% min. retained, moiature -- 1% max , ap. gr.--1.03 at 25C.; melting range, initial melt 75-100C. USES: For protection of rubber against heat deterioration and normal aging. It cauaee leas discoloration than moat other fullpower antioxidants. It i* an accelerator for Neoprene vulcanization FJecto! H is excellent for reducing frosting on ary heat cured com pounds. For maximum protection uae 1% to 3% baaed on the rubber. SHIPPING INFORMATION: Rubber Preeervative, NOIBN. SANTOFLEX AW 6-athoxy- 1,2-dihydro-2.2.4 trimathyl- quinoline. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--dark viacoua liquid; heat lose--1% max ; insoluble* (benzene)- trace max ; p. gr.--1.04 at 45C. USES: For reducing the harmful effect of ozone attack and in this respect it appear* to be somewhat more effective with SRR than natural rubber. It la particularly suggested for compounds used in dynamic tervice where waxes are eometimea not desirable. 2% on the hydrocarbon is usually sufficient. Santoflex AW ia a fairly good antioxidant for the prevention of the usual deterioration on aging It also has considerable merit as a flex-cracking inhibitor. Discolors and stain* vary badly. SHIPPING INFORMATION: Rubber Preeervative, NOIBN. SANTOFLEX DD -Qodecyl-1.2-dihydro-2.2.4-uimalhyl- quinoline. ORGANIC DIVISION-LITERATURE AVAILABLE liquid; aah--0 0.93 at 45C. USES: For inhibiting flex-cracking and oxidation. It ia especially recommended for rubber article* uaed in dynamic service but i* equally effective in any type of rubber compound. It causes rather severe discoloration and staining. 1% to 2% on the hydrocarbon ia usually sufficient but up to 4% can be used with improved results. SHIPPING INFORMATION: Rubber Preeervative. NOIBN. SANTOFLEX 13 N-(1.3-Dimethylbutyl)-N'-phenyl P phenylenediemine ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--dark crystals below melting point, dark liquid above melting point; ash 0 1% maximum; crystallizing point range. C.--40-44; specific gravity <-<$, 60C.--0.986-1.00; SUS viscosity <& 60C., sec - 135-170; heat lose, 3 hr*. "0*C.. % --1.0 maximum. USES: Outstanding antidegradant for all commonly used el.istomers. It ia an exceptionally efficient, antioxidant, copper and manganese inhibitor, and Rex-cracking inhibitor. Serves a* no excellent polymer stabilizer while retaining carry-over activity aa an antiozonant/antioxidant. 0684962 TOWOLDMONOQ43065 f SANTOFLEX 13-S 1 pin Swtoflex-13 end 1 pin cerbon bfeck. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance--black granule*; specific gravi (II 26C.--1.09-1.13*; bulk density (ft 25C.--45 Iba./cu. acetone extractable*. % --SO 1.5. Specific gravity measured on unground product as produced, i water medium, tor better ^uabt^controL For compounding { USES: Outstanding antidegradant for all commonly used elast omers. Recommended where solid handling is preferred and is an efficient antiotonant. antioxidant, copper and manganese inhibitor, and flex-cracking inhibitor. SANTOFLEX 17 N.N'-Bit(t- ethyl-3-methy/pentyl)-p phtn yfinidiimini ORGANIC DIVISION-LITERATURE AVAILABLE TYPICAL PROPERTIES: Appearance and condition, dark reddish brown liquid; sediment, trace max ; heat loss 2 hr. (ft 105C. 0.5% max.; copper content 10 ppm max.; vapor pressure (3, 25C. leas than 1 micron; Sp. Or. 0.90 approx.; wt. per gal. 7.5 lb*. U9E9: An antiotonant to protect against degradation in poly unsaturated elastomer*. SHIPPING INFORMATION: Rubber Preservative. NOIBN. SANTOFLEX IP N-ltopropyl-N'-phenyl-p-phenyhnediemine ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, dark black flakes; ash 0.5% max.; crystallizing point range Sp. Or. (approx.) 1.04 @ 25C. U8ES: Santoflex IP Is an outstanding antidegradant for the pro tection of rubbers against oxidation, ozone, flex-cracking and poisoning by copper and manganese. It has high activity with all commonly used elastomers ana may be used with other protective agents to achieve enhanced effects. Santoflex IP disperses most easily during mill or Banbury mixing. It stains and discolors rather severely. Depending upon the appli cation, the recommended dosage varies from 1 to 3% on the rubber. SHIPPING INFORMATION: Rubber Preservative. NOIBN. SANTOFLEX 76 Mixture of N.N'-diphenyl-p-phenylened!e- mine (OPPD). 75%, end 5- dodecyl- 1,2-dihydro-2,2,4-trlmethylquinoline ("Senloflex" DO), 25%. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--dark flakes; asb-- 0.5% max.; sp. gr.--l.Wat 26C. USES: For reducing aging and oxidation effects. Santoflex 75 con tains a high percentage of N.N'-diphenyl-p-phenylenediamlne. It Is designed for those who wish to use a high dosage of this material, with a lower amount of regular antioxidant. More than 0.4% on the hydrocarbon is liable to cause blooming. SHIPPING INFORMATION: Rubber Preservative, NOIBN. SANTOFLEX 77 N.N'-Bls(1,4-dlmethylpentyl)-p-phenylene- dhmlni ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance--reddish-brown liquid; ash, 0.6% USES: Antiozonant for all commonly used elastomers, with par ticular effectiveness in static applications. Gives good short-term dynamic protection. SANTOFLEX 217 N,N`-Blt-(1-methylheptyl)-pphenylene- diemine. ORGANIC DIVISION-LITERATURE AVAILABLE TYPICAL PROPERTIES: Appearance and condition, dark reddish brown liquid; sediment, trace max.; heat loss 2 hr. (ft 105C., 0.6% max.; copper content 10 ppm max.; vapor pressure 25C., less than 1 micron; 8p. Gr. @ 80F., 0.90 approx.; wt per gallon USES: An Antiotonant to protect against degradation in poly unsaturated elastomers. BHIPPINO INFORMATION: Rubber Preservative. NOIBN. SANTOVAR A 2,5-d/-(tert-emyl) hydropuinone. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--buff powder; ash--0.5% max.; fineness (100 mesh)--trace max. retained; melting point--172C. min.; heat loss--1% max.; sp. gr.--1.05 at 25C. USES; For the protection of uncured rubber against oxidation. It also Inhibit* oxygen attack on uneaturated resins and oils. Cold flow of uocurea compositions is reduced by a stiffening effect of Santoi,ar A. Excellent for adhesives or other uncured films. It is non-staining and non-diacoloring. Use 10.5% to 4% on the materia! to be protected. SHIPPING INFORMATION: Rubber Preservative, NOIRN. SANTOWHITE 54 Modifitd hindered phenol. ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition, clear, ziraw-colored liquid: ash 0.25% max.; crystalliilng point, crvatallize but forma >liu helnw -- 10r boat Inu n V USES: Sanlou'AiVe 54 is an outstanding antioxidant from the stand points of discoloration and staining. It is easily emulsified for use in latex and incorporates readily in dry rubbers. It is employed at 1 to 2% based upon the hydrocarbon. SHIPPINC INFORMATION: Rubber Preservative, NOIBN. SANTOWHITE54-S RUBBER ANTIOXIDANT (Solid form of Sentowhite 54) ORGANIC DIVISION-LITERATURE AVAILABLE COMPOSITION: Two parta of active material and 1 part of Inert filler. USES: Antioxidant (See Santou'Me 54). SHIPPING INFORMATION: Rubber Preservative. NOIBN. SANTOWHITE CRYSTALS 4.4'-thiobis-(6-ten-butyl- m-cresol). ORGANIC 0IVISI0N --LITERATURE AVAILABLE SPECIFICATIONS; Appearance and condition--light gray to tan powder; aah--0.5% max.; fineness (50 mesh)--trace max. retained; melting point--150C. min.; moisture--1% max.; ap. gr.--1.10 at 25C. USES: For the protection of light colored rubber from oxidation. It la also useful in any rubber product used In contact with surface* such as lacqusr or enamel which are subject to staining by ordinary antioxidant*. Santou>fiit Crystal* provide* excellent protection against normal aging. Use 1% to 2% on the hydrocarbon. Excellent for the protection of non-staining Neoprene compounds against heat deterioration. SHIPPING INFORMATION: Rubber Preservative. NOIBN. SANTOWHITE L RUBBER PRESERVATIVE (Essentielly) thiobis-(di-tec-emyfphenol), ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--dark, viscous liquid; aah--0.25% max.; heat loss--0.5% max.; softening point-- 0C. max.; ap. gr.--0.99 at 50C. USES: For protection of rubber and rubber latex from oxidation It is easily emulsified and baa no effect on latex stability. It is a non-staining and non-di*colorlng antioxidant of medium strength. SHIPPING INFORMATION: Rubber Preservative, NOIBN. SANTOWHITE MK RUBBER PRESERVATIVE (Ruction product of Sterl-butyl-m-eretol end SCI*) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--dark, viscous liquid; ash--0.5% max.; heat lots--5% max.; softening point20 to 35C.; ap. gr.--1.06 at 25C. USE9: For protection of rubber from oxidation. It ia excellent from the standpoint* of staining and diacoloration. Use 1% to 2% on the hydrocarbon. Give* good protection to uncured SBR latex compounds. SHIPPING INFORMATION: Rubber Preservative, NOIBN. SANTOWHITE POWDER 4,4'-butylidenebit (6-tert- butyl-m-cresol). ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--white powder; aah--0.3% max.; fineness (100 mesh)--trace max. retained; melting point--209C. min.; heat loaa--0.5% max.; ip. gr.--1.03 at 25H\ USES. For protection of laticea and dry rubber against oxidation. It ia unexcelled from the standpoint* of staining and discoloration. Use 1% to 2% on the hydrocarbon. SHIPPING INFORMATION: Rubber Preservative, NOIBN. 0664963 TOWOLDMONOQ43066 SPECIAL MATERIALS INSOLUBLE SULFUR 60 ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--greenish yellow powder: fineness (45 mesh)--trace max. retained: heat loss--1.4% max.: insolubles (carbon disulfide) 55% min.: ap. gr. --2.0 at 2SC. USES: Used to retard aulfur bloom on uncured natural rubber or synthetic rubber surfaces. Used in the tame amount as regular sulfur. With this type of aulfur there is usually a slightly enhanced rate of cure. SHIPPING INFORMATION: Sulphur. NITROL* ELASTOMER MODIFIER <t f,,, n-[j. methyl-2-Nitropropyl] 4-NiirtsoaniUne 2 parts inert diluent.) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--light gray powder: assay--31.6-35.0%; Oneness (100 mesh)--2% max. retained; heat loss--0.6% max. USES: Improves hysteresis of rubber vulcanizatea (lowers heat build-up). SHIPPING INFORMATION: Flammable Solid NOS (Chemicals NOIBN). SULFASAN R VULCANIZING AGENT dithiodimorpholine.) ORGANIC DIVISION-LITERATURE AVAILABLE melting pointretained, (200 sp. gr.~1.36 at USES: Vulcanizing agent. Stocks containing Sulfatan R give excel lent aging and freedom from cured bloom. It does not discolor white compounds. Especially effective with Sulfenamide accelerators. SHIPPING INFORMATION: Chemicals, NOIBN. VOCOL* RUBBER ACCELERATOR (Metallic selt of dieikyl-phosphorodithioete acid) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--clear to yellow green liquid, approximately 100% active; aoluble in benzene, alcohols and miscible with oils. USES: Low cost, non-blooming, fast curing activator for EPDM elastomers. SHIPPING INFORMATION: Rubber Accelerator; NOIBN. VOCOL* S RUBBER ACCELERATOR (62% VOCOL on 38% Inert Carrier) ORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: Appearance and condition--solid, off-white pellets, 62% eoluble in benzene, alcohols. USE8: Low cost, noD-bloomlng, fast curing activator for EPDM elastomers. SHIPPING INFORMATION: Rubber Accelerator. NOIBN. RUBBER INSTRUMENTS OSCILLATING-DISK RHEOMETER See Page 16 MONOMERS FOR SYNTHETIC RUBBER Set Page 25 ACRYLONITRILE See Page 25 STYRENE MONOMER See Page 26 SPECIALTY PRODUCTS ADHESIVES PHENOLIC AND RESORCINOL RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquids. PROPERTIES: Various products are available for requirements demanding an extremely high degree of water resistance. Bonds can be made capable of withstanding continuous boiling. USES: Glues for plywood, hardboard. particle board and general woodworking. Used for hot and cold preaslng and for radio fre quency work. INDUSTRIAL USERS: Plywood, Hardboard. Particle Board and General Woodworking Industries. SHIPPING INFORMATION: Metsl drums (500-lbs tank trucks and tank cars. Glues Liquid, NOIBN. UREA AND MELAMINE RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquida; dry powder*. PROPERTIES: Various products are available for uses requiring varying degree* of water and weather reaiatance, speed of set and strength. USES: Hot and cold setting adhesives for ths plywood and wood working industries. Bonding agent for particle board. Can he formulated for high frequency equipment. INDUSTRIAL USERS: Plywood. Particle Board, and Forest Products Industries. SHIPPING INFORMATION: Fiber drums (250-lbs.) for powdered melamine resins. Metal drums (600 lbs.), tank trucks and lank cars for liquid urea resins. Dry Powders: Rail--Plastics. Synthetic, other than liquid. NOIBN. Truck--Plastics. Powder. Liquid Rail--Plastics, Synthetic, NOIBN. Truck--Plastics, Liquid, SOL ADHESIVES COMPONENTS GELVA POLYVINYL ACETATERESINS & EMULSIONS See Pages 46 end 47 GELVATOL POLYVINYL ALCOHOL See Page 47 BUTVAR POLYVINYL BUTYRAL See Pages 47 end 48 0684984 TOWOLDMONOQ43067 tflfelint nahtaMifcatm.- *,- o. Al At* r---AMfc -fcfeAN ANTI-CAKING FLOW CONDITIONERS SANTOCEL SILICA AEROGEL phcttiom.) INORGANIC DIVISION-LITERATURE AVAILABLE TYPICAL ANALYSIS: Rang of Various Grades Bulk Density Particle Sits (AV) Surface Area gil Absorption 10. Volatile Na.SO< fades of Refraction Absolute density Unit iFTcuTTT microns eq. metera/gm cm. oll/gm SANTOCEL 5.6 3-5 130 398 3.0-3.6 90.0-96 3,5.5.0 0.03-3 3.S-3.8 1.45-1.46 17.1 types (lacquers, varnishes, vinyl res_-------- _---------------------- ,~ ilons): bodying agent in printing Inki; bulking ageDt for dry powders, free-flowing and anticaklng agent for ary powders: ecttclde for stored industrial grains; application aid for ru cements; reinforcing agent for silicone rubbers; bodying seen. .. make lubricating greases; dry grinding aid for DDT and other removers; antlaettling agent for pigments; antisUp agent In paste floor waxes; flatting agent for free film and textile coatings. Imparts thixotropy properties to potyeeter and epoxy resins dispersions and solutions; thickening and thixotropic agent for polyvinyl chloride plastisols and plasticiser dispersions. SHIPPING INFORMATION) Silica NOIBN lees than 10 lb. per cu. ft. Multiwall bags, C, C8. FR-C--28-lb.; CX--15-lb.; 64-- 20-lb. SANTOCEL SILICA AEROGEL (lot Thtrmtt Intul- ttlon.) INORGANIC DIVISION STANDARD FORM: SontocW A--sugar-sited particles. TYPICAL ANALY8IS: Approximate analysis for ell insulation grades of Santoctl: 810., 93.0-96.0%; volatile* 0.6-1.6%; NatSO., 5,6-3.6% ; FeiOi and AiiOi, 1%. Volatile in water, alcohol, acetaldehyde, PROPERTIES: Known technically as a silica aerogel, it possesses the lowest coefficient of thermal conductivity known. Dnr bulk density: Sontoctl A, 6-lbs. per cu. ft.; absolute density 17,1 (be. per gal.; specific heat 0.234: angle of repose 12.6; thermal conductivity (meantsmp. 60*F.) 0.160 BTU/Hr./Ft.*/ln./*F. USES: Adapted for any use where efficiency or space saving is a factor in thermal insulation, especially In freezers, shipping con tainers, insulated truck#, trailers and freight cars, liquid oxygen manufacture end storage, end cold-storage room doors. ANTI-FOAMING AGENTS PC-1244 DEFOAMER OROANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Clear light yellow liquid. 5 at 6 0*F.j GENERAL INFORMATION: 8olubllity--PC-1244 Is soluble In benzene, toluene, keroeene, petroleum ether, carbon tetrachloride, laopropanol, tertiary amyl alcohol, butyl celloeolve and ethyl acetate. It ia not aoluble in water, methanol, ethanol and methyl celloeolve. USES: Foam control in Don-aqueoua ayateme. In paraffin wax formulations It not only controls foam, but also imparts a leveling action. Unusually affective In neutral or acidic media. 64 ANTI-SLIP AND ANTI-SOIL AGENTS SYTON AS-200, AS-240, AS-250 COLLOIDAL SILICA INORGANIC DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: Most carpet fabrice can have their toiling propertiee improved by a treatment of a very finely divided colloidal allies dispersion. Wool-rayon bleods. cotton and other synthetic carpets can be markedly Improved against soiling by a allies sol treatment. Pure wool carpets are lees lubiect to improve ment than the synthetics or blend*. In combination with certain film formers, paper eurfacee can be made toil resistant. When directly applied to hard surfaces, toil resistance results. Available in 30% , 40% St 45% solids content. USES: For use as an snti-soilsnt for pile fabrics. SYTON C-30 AND 200 COLLOIDAL SILICA INORGANIC DIVISION TYPICAL ANALYSIS) SiO, Water Na90* 8p. Gr. pH Appearance Ultimate particle else 8yton C-30 70% 0.16% 1.2 10.0 Milky white dlapsreion 360-400 angitroms 70% 0.10% 1.2 lightly turbid liquid 100-250 angstroms GENERAL INFORMATION: Colloidal dispersion of UJca in water Will freeze at 32F. and the silica is precipitated irreversible USES: Anti-blocking agent in water finishes. Gloat control agent in water finishes. Increase bond strength of rubber latei adhesives Increase modulus of lates film end thread. Surface harden water base laminating resins. Suspending agent for pigments In water systems. Mold lubricant. Binder for precision casting molds. Flame retarding agent for water-based paints. Improves soil resistance of hard aunacea. Improve# tenth and toil ree[stance of water-based paints. SYTON C-40 & 240 COLLOIDAL SILICA INORGANIC DIVISION-LITERATURE AVAILABLE Typical Physical and Chemical Propertiee SiO> Water Specific Gravity vScoaltj ~ ' (25*C, B- Spindle) Appearance** C-40 240 pH at 26C Compatibility Ultimate particle else Clarity (% trans mission by Electrophotometer) Lbs. per gallon Lbs. SiOi per gallon 9.8 Excellent with aonionlc end anionic surfactants 360-400 Angstroms 100-250 Angttroms 35-40 millimicrons 10-25 millimicrons 10 10.77 4.30 10.77 4.30 *Tht visual difftrtncti can 6e related to difftrtneii t i ultimate pa'i stse using ligM tcotttring Itehnujutt. A 40% concentration of SiOi in the form of colloidal allice sol Have the same application aa the 30% grades with added advantage freight warehouse end handling savings. These particles are rigid chemically inert, pure SiOi. The colloidal suspension hs* a low viscosity and may be applied by rolling, spraying, brushing or dipping. Syton ia used where frictionizing, reinforcing or surface modifying properties srs desired. Heat stability tests show ih.it Syton undergoes no increase in viscosity when heated even a* long aa 200 hour* at 77C in a closed container. If the water is allow.-,i to evaporate, either et room or higher temperetures, Syton 24U or Syton C-40 will exhibit a greater tendency toward formation r silica teals or deposits due to higher tilice concentrations. 0684985 mi TOWOLDMONOQ43068 SYTON C-50 AND 250 COLLOIDAL SILICA INORGANIC DIVISION Typical Physical and Chemical Properties C-50 8iOi Specific Gravity vlacoalty Centipoise (25*C., Brookfield |1 Spindie) pH at 25*C. 50 1.38 A 50% concentration of SlOi in the form of colloidal ellict eot. Sam* applications a* 30% and 40% with added benefit* of frei|ht, warebouae and handling aavlnga. SYTON DS, DS-40, DS-SO AND DS-200, DS-240, DS-2S0 COLLOIDAL SILICA INORGANIC DIVISION --LITERATURE AVAILABLE GENERAL INFORMATION: Extremely fine colloidal aqueous diaperaioiu of silica. In textile spinning: controls the alippage between fiber*, thereby increasing tensile strength of spun yarns, permitting leas twiat In some cases, or fewer breaks during spinning and weaving. In textile finishing: controls slippage In woven rayons, gives dry worsted-like hand, deluaters in higher concentration*. USES: Spinning, wet processing and finishing textiles. SYTON W-200, W-240, W-260 COLLOIDAL SILICAS INORGANIC DIVISION--LITERATURE AVAILABLE GENERAL INFORMATION: The Syton W series is an extremely fine colloidal aqueous silica dispersion and is used in wax ecnul- USESi For use as an anti-slip agent in wax emulsion polishing compound*. BACTERIOSTATS/DISINFECTANTS/FUNGICIOES FUNGISTATS/GERMICIDES ACL SANTICIZER AND BLEACHING COMPOUND St$ Pgt 71 MONSANTO PENTA Ptntichlorophtnol. Ttchnictl- ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT) 266.35 STANDARD FORM: Flakes. Mon$anlo Pent* Oiled elso available Contain* 3-ibs. oil per 100-lbs of PENTA TECHNICAL Oil decreases aomewhat the duating tendency of the product. SPECIFICATIONS: Dark, grayish flakea; cryatalliting point 174.0'C. min.; alkali insoluble material 1.0% max ; assay 96 0% mhn.^pLne oil solution NPA 5.5 maa. Meets Federal Specification PROPERTIES: Chloropbenolic odor; bulking value 45.5 lb*, per cu. ft.; stable under ordinary condition*, relatively non-hygroacopic and unreactiva chemically; soluble to various degrees in organic solvents; relstivsly insoluble in wster. USES: Highly toxic to fungi, termite* snd many form* of bac teria. Uaed Industrially where the growth of microorganisms must be prevented or controlled; to protect wood sgainat rot, termite* and Lyctu* (Powder-Post) beetles; a* *n effective herbicide. Pente is used frequently in oil solution* or as the sodium salt (aee Ssntobrita). SHIPPING INFORMATION: Pantacblorophanol. 100-lb fiber container; 50-lb. multiwall paper bags. Oiled Pent* 16H -gal. lever-pak; 51-lb. multiwall paper bag*. ANTIOXIDANTS SANTOQUIN ANTIOXIDANT Vhoxyquln. 1 -2-dihy- dto-S-tihoxy 2,2,4 trimtlhylqulnolint AGRICULTURAL DIVISION--LITERATURE AVAILABLE carotenes and xanthoplyll pigments at wall as Vitamin* A and E. SantoQufo la also an antioxidant uaed in dehydrated forage crop# for the preeervstion of cerotene* end Vitamin E. The use level permitted in the Regulation Issued by the United State* Food LIQUID FORM: Dark liquid -- varies from yellow to black but biological activity la independent of oolor. Sontocum liquid la a 100% biologically activ* antioxidant. DRY FORM (MIXTURE f)> Contain* 66.0% Santocui'n liquid and 33.4% food grade vtrmiculite (varxite). A brown, tree-fiowing granular material with a density of 23 pounds per cubic foot. SANTOBRITE SODIUM PENTACHLOROPHENATE, TECHNICAL ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 268.36 STANDARD FORM: Neutral powder, pellets, fine* or briquettes. SPECIFICATIONS: Light tan powder, pellets, fine* or briquettes; assay 68.0% min.; free alkali (as NaOH) 0.5-0.9% . briquette* 40-50 Iba/ft.*, pellet* 35-40 ... , ,,.,-w Iba./ft.*; soluble in water and various organic polar solvents. Relatively inert toward organic compounds. USES*. A water-soluble Industrial preservative, fungicide and herbicide. Uaed for the menufacture of termite-resistant cellulose insulating board and for the preeervstion of wood, cellulose products, teitUee, starches, adhesives, leather, oils, paint*, latex and rubber. Also for control of elime and algae; manufacture of herbicide*, as a fermentation disinfectant; for control of aap stain in green lumber. FDA STATUS: Regulated. SOPANOX ortho-TOLYL BIGUANIDE ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 200.24 STANDARD FORM: Powder. SPECIFICATIONS: White to off-white powder; assay 90% mlo.: i-------- a...i-- -------- -Li--------- h* i5ac. min ............ 1 e 0.5% max. PROPERTIES: An amino compound affective in minute quan tities in restraining the oxidation of soap and the resulting rancidity, discoloration and other advene qualities, all of wbicn mutt be avoided in producing a product of highest grade. USES: Our experience show# that Sopanox satisfies the exacting demands of manufacturers of soaps produced from animal or vegetable oils, filled or unfilled. Particularly valuable in preventing discoloration of refined toilet soape. SHIPPING INFORMATION: Chemical* NOIBN. 150-lb. leverpelts. SANTOPHEN 1 GERMICIDE otlho-btniyl-pinchloio- phtnol. ORGANIC DIVISION-LITERATURE AVAILABLE MOLECULAR WEIGHT: 218.68 STANDARD FORM: Flaked solid. SPECIFICATIONS: White to light Us or pink flakes, cryatailizing Slat 45 0`C. min.; Sp. Gr. 1.186-1.190 at 56V15.5`C ; free acidity i HCI) 0.01% max.; odor alight phenolic max. PROPERTIES: SonlopAen 1 poaaeaeee high bactericidal and fungi cidal activity, but low toxicity to higher animals. When property formulated for disinfectant use, it is considered nonirritating in use dilutions. Insoluble in water, but highly soluble in alcohol anil other organic advent*: diaperaibl* in aqueous media with the aid of soap# or synthetic dispersing agents. Noncorrosive to most metals or other engineering materials. Sontophtn 1 can be easily rendered water soluble by converting it to the sodium aalt. USES: Uaed a* the active chemical agent for finished products that destroy harmful microorganism* that attack human beings, animals ana naturally derived materials. 0684966 A TOWOLDMON0043069 SANTOPHEN 1 SOLUTION 75% SANTOPHEN 1. 25% isop/optnol. ORGANIC DIVISION 8TAKDARD FORM: Liquid SPECIFICATIONS: Straw to nmlxr colored liquid: assay 75 0 to 77.0% ; Sj> Gr. 1.080-1.090 at 15.5#/15.6*C.; color Barrett Std. No. 3 max.; moisture 0.25% max. USES: Used as the germicidal active principle, or as an enhanc ing agent for disinfectants. Santophtn 1 solution is convenient for formulators who normally dissolve the compound in isopropyl alcohol. The- use of SontopAen 1 solution saves one step in formula tion procedures. SHIPPING INFORMATION: Disinfectant other than medicinal NOIBN. 55 and 15-gal. drums. TCC 3, 4. 4` Trichloroctrbtnilldt. ORGANIC DIVISION--LITERATURE AVAILABLE MOLECULAR WEIGHT: 315.6 8TANDARD FORM: Micronited and unmicronited. SPECIFICATIONS: Fine white to grayish white powder; loss on drying at 110"C., 0.15% ; melting point 260.0C. (first meniscus); particle site: micronited unmicronlted 20 microns max. 3 microns ave. 0.1% retained on a 30 mesh screen USES: 3,4.4' trichlorocarbanlllde is recommended for incorporation into soap and other topically applied preparations as a degermtng agent. SHIPPING INFORMATION: Chemicals. NOIBN, 100-lb. fiber drums -- micronited. 200-lb. fiber drums--unmicronlted. CHEMICAL SPECIALTY CATALYSTS VANADIUM SULFURIC ACID CATALYST ENGINEERING SALES-INORGANIC DIVISION GENERAL INFORMATION: Sold in conjunction with complete plants of Monsanto design and also for replacement purposes In any contact plant. USES: In manufacture of sulfuric acid by contact process. (Not suitable for other purposes). SHIPPING INFORMATION: Chemicals NOIBN. 60-Liter Lever-pak. CURING AGENTS CATALYST AC SERIES PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORMS: Catalyst AC la light yellow liquid com patible in reein baths with most cationic, anionic, anionic and nonionic softeners and penetrant* Catalyst AC is used with Rttloom HP finishes. Catalysts AC-4 and AC-6 are clear, compatible liquids. AC-7 is an organometatlic catalyst designed for curing formalde hyde-containing retina used in the textile industry. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Spocda cure of cyclic-urea and melamine treating ratine. USES: To provide rapid and uniform retin cure and retention in treatment of fabrics, including rayons, cottons and the synthetics. INDUSTRIAL USERS: Textiles. SHIPPING INFORMATION: AC--476-lb. drums; AC-2 thru AC-7--500-lb. drums: All AC series can be chipped in liquid bulk. Glue Catalyst NOIBN. DECORATIVE & FUNCTIONAL OVERLAY PAPERS MONPREG fmpregnited Pept/s PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Thermosetting resin-impregnated papers for either decorative or functional applications. PROPERTIES: Low-cost, hot-preea. low-pressure surfacing overlay for lamination to various types of substrate. 66 USES: Decorative -- Provide* durable, decorative, and color stable surface for low-coat substrates used in the manufacture of furniture, cabinets, wall paneling, etc. In the cured form, this surface exhibits excellent resistance to wear, scratching, beat and chemicals Functional -- Provides check resistance and good payability for plywood and other wood-type substrates which are used as sign boards, concrete forma, shelving and either interior or exterior paneling. 8HIPPING INFORMATION: Both type* of MONPREG are shipped either in roll form or in precut sheet form. In either case it is wrapped in polyethylene and packaged in heavy duty card board boxea. FIRE RETARDANTS ACID, PHOSPHORIC See Ptgt 30 DIAMMONIUM PHOSPHATE See Ptgt 29 MONOAMMONIUM PHOSPHATE See Peps 29 PHOS-CHEK FIRE RETARDANT INORGANIC DIVISION-LITERATURE AVAILABLE SPECIFICATIONS: % PiO. Phot-Chtk 202 47.0 min. & 76F. (1) Corrosion: (2) 1,000-1,600 Phot-Chtk 269* and 465' 48.5 min. 60 min., 100 max. On Aluminum 1 mll/yr. 6 mila/yr. max. Od Copper 1 mil/yr. max. 1 mil/yr. max. (1) Brookfield Viscometer, 60 rpm, Spindle H on a 13% solution (2) Alternating 30 sec. immersion ana drain cycles & room temp, for 72 hours. USES: For preparing fire fighting solutions. 202 la designed for application from aircraft; 259 ana 465 are applied from ground equipment. *465 is designed for immediate application; 259 la more stable and can be stored Indefinitely. PHOS-CHEK P/30 See Ptgt 68 PHOSGARD C-22-R See Ptgt 51 PLASTICIZERS (Set ptrticultrly Aroclor: Smticiitt 140. 141. 148; Tricresyl Phosphite. Tributoxy Phosphite). TETRATHAL FLAME RETARDANT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: White flekee. PROPERTIES: Molecular weight, 285.9; chlorine content, 49.6% ; melting range, 254-255*F. USES: Tetrathal (tetrachlorophthalic anhydrldo) is a versatile, effective, low-coel flame retardant for polyester resins used in building construction, transportation, chemical and food prepara tion equipment manufacture. In addition, flame resistant urethane foams can be made using polyols baaed on Tetrathal, as can alkyd and epoxy surface coatings. 8HIPPINC INFORMATION: 60-pound bags. FLAVORINGS Set Ptgt 17 0684967 TOWOLDMONOQ43070 METAL PROCESSING COMPOUNDS BONE ASH (NATURAL) INORGANIC DIVISION--LITERATURE AVAILABLE PROPERTIES: A very finely divided bone ash ueed as a mold* wash for coating mold* uaed in casting copper wire, ban, ingots and tlabs. A superior mold coating for certain atee! and aluminum casting operation*. This product ie also uaed in producing highgrade chinaware. SHIPPING INFORMATION: Bone Ash. MOULD COAT Synthetic gone Ash INORGANIC DIVISION-LITERATURE AVAILABLE PROPERTIES: A synthetic bone ash (calcium phosphate) with properties similar to the natural product. USES: As shown above. 80 88NFB AND Non-fuming Aluminum Bright Dip Beth. INORGANIC DIVISION FORMIILAt 80% HiPOi 4 trace additives 65% H>PO< + trace additivee STANDARD FORM: Liquid. TYPICAL ANALYSIS: Sp. Gravity at 16.6*C. PiO. HiPOi Copper NFS$80 1.64 68.0% 80.0% .01% NFS65 1.7 61.6% 85.0% .01% USES: Proprietary solutions uasd exclusively in the aluminum bright dipping industry aa direct replecemenu for 60% and 85% phosphoric acid and various additives now uaed. It decreases nitric oxide fumes and chemical coat of operations, frequently with im proved work quality. SHIPPING INFORMATION: Phosphoric Acid. Tank car and tank truck. ODORANTS COUMARIN ORGANIC OlVISlON--LITERATURE AVAILABLE MOLECULAR WEICHTt 146.14 STANDARD FORM: Crystalline solid. SPECIFICATIONS: White crystals; melt (Uquid) clear and color less; M.P. 68.8#C. tnln.; solubility In ethyl alcohol (1:10) complete; acetaollid. ' ' ................. . GRADES: Crystals. USES: Deodorising and odor enhancing agent; uaed in perfumes. oaps. tobacco. Inks, rubber and otber products where aromatic SHIPPING INFORMATION: Chemicals NOIBN. 200 and 25-lb. fiber drums. METHYL SALICYLATE U.S.P. See Pege 17 SANTOMASK II ODOR-MASKINQ AGENT ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. SPECIFICATIONS: Clear, light yellow Uquid; pleasant character istic odor; Bp. Gr. 26V26C. 1.18 to 1.20; color NPA 2.0 max.; chill test, clear & 0C. USES: Odor-masking Ingredient for Interior painte, printing inks and similar products having objectionable natural odore. WUI not affect drying time, color durability and other cbaracterletica of SHIPPING INFORMATION: Chemicals NOIBN. 260 and 45-lb. drums, VANILLIN MONSANTO* venaan u.s.p. See Pege 1$ PAINT/COATING INGREDIENTS BENTHAL ALKYD RESIN INTERMEDIATE ORGANIC DIVISION STANDARD FORM: White flakes TYPICAL ANALYSIS: Moisture 0.20% met ; C.P. 121.5*C. (min.); bulking value 12.7 Ibe./gal. USES: BentHai is used in short oil alkyda which are primarily baking finishes for appliance and automotive enamels By reducing excess amounts of alcohols In the formulation and Introducing Btnthal in quantities of 3-20% by weight on the phthalic anhydride, enamels show substantial improvement In gloss, hardness and durability. The BenlAa( acts as a chain terminator hence retarding the viscosity Increase until low acid values are obtained in the reeio. SHIPPING INFORMATION: Reeio Plasticiser. 200-lb. net wt, fiber drums, 60-lb. bags. BISPHENOL A See Pege 29 BUTVAR POLYVINYL BUTYRAL See Peges 47 end 49 D. P. SOLUTION Dibutylemine Pyiophotphete. INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Liquid. PROPERTIES: Pale straw-colored liquid: wt. per gel 6.2 lbs.; 40% sol. In equal parts of ethyl alcohol and acetone. USES: An anticorrosion agent In lacquere and cotton solutions; an agent to prevent the settling of Santocel flattening agent In flat lacquer formulations; for light and beat stabilisation of vinyl chloride and vinyl copolymer mins. SHIPPING INFORMATION: Chemicals NOIBN. 55 and 5-gsl. Hereaite-lined steel drums. DIBUTYL FUMARATE Baa Pege SI DIBUTYL MALEATE See Pege SI DIOCTYL FUMARATE (DOF) See Pege St DIOCTYL MALEATE (DOM) See Pege 51 FORMVAR POLYVINYL FORMAL See Pege 49 GELVA POLYVINYL ACETATE See Peges 46 end 47 GELVATOL POLYVINYL ALCOHOL See Pege 47 HBPA HYDROGENATED BISPHENOL A See Pege SI 0664986 67 TOWOLDMONOQ43071 LAMPBLACK INORGANIC DIVISION --LITERATURE AVAILABLE STANDARD FORM: Powder. PROPERTIES; Free Grade Car mack bon #Oil/ Black Oil Abaorp- Under Tone Top Tone 1 " AA *2 8 S-100 HTA B-5 10 IOC 99 57 87.97 99.42 91.46 98.08 98.62 98.92 99.29 99.10 1.65 1.20 1 84 1.37 1.42 1.34 1.25 126 Blue Black Blue-Brown Brown-Black Blue-Gray Gray-Black Blue Brown-Black Blue Black Blue Blue-Black 140 Blui Blue-Black Blue-Gray Gray Blue-Gray Gray NOTE: The figures In the column TINTING STRENGTH relative value* ueinft No. 10 Lampblack a* a standard. For example: A value of 225 for tinting strength of AA Lampblack means that this block 1* 2'i times as intense as No. 10 Lampblack. USES: Pigment in paints, varnishes, enamels, inks, leather finishes, stencils, crayons, polishes: in pressed forms as electrodes, carbon bruahea and molded carbon products. 8HIPPING INFORMATION: Lampblack NOIBN when wt. per eu. ft. la under 17-lbs; Lampblack Compressed when wt. per cu. ft. is 17-lbs. or over. Paper bags and cartons. MALEIC ANHYDRIDE See Pege 23 MERTONE WB-4 Precott for Reproduction Pepett. INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM) Liquid. PROPERTIES: A 30% colloidal dispersion of silica In water; odorless USES: As a precoat on blueprint end other reproduction papere for clearer, more legible print#. On blueprint a darker, more lively blue ie obtained. Alio used on diato paper, blueprint cloth, negative SHIPPING INFORMATION; Chemical# NOIBN. 56-gal. lined ateel druma. MODAFLOW RESIN MODIFIER See Pege 23 PHENOLIC VARNISHES See Peget 49 end 50 PHOS-CHEK P/30 fire Reterdent INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM; White Solid. TYPICAL ANALYSIS; pH (10% slurry) 6.6. phosphorus content (es % P) 32% . particle else ( +200 meah) 0.6% . PROPERTIES; A finely divided, free-flowing powder, contain* a very high phoephorua content, is nearly neutral, and has vary low solubility in watar. USES: A highly effective fire retardant, it is useful in intumeecent latex and aikyd painta. It la highly non-leachabla from coatings which may come into contact with watar. Also effective as a flame retardent for rigid polyurethane foam, SHIPPING INFORMATION; Polyathylsnt lined fiber drum*, 300 pound* (net). Chemical* NOI. PHTHALIC ANHYDRIDE See Pege 5t RESIMENE MELAMINE RESIN See Pege 60 RESIMENE UREA RESIN See Pege SO RESINOX PHENOLIC RESIN VARNISH See Peget 49 end 50 68 'r^V- RJ-100 AND RJ' 101 STYRENE-ALLYL ALCOHOL COPOLYMERS See Peg* 46 SANTOCEL Silict Aeroge See Pege 64 SANTOCEL 62 FLATTING AGENT INORGANIC DIVISION-LITERATURE AVAILABLE Flatting agent for clear and pigmented protective and decorative coatings. High flatting efficiency, short dispersion times in pebble mill or high speed mixers. Yield* final film of excellent smoothness. Settling on storage only slight and can be easily redispersed. SANTOCEL L FLATTING AGENT INORGANIC DIVISION-LITERATURE AVAILABLE A silica aerogel used as an additive for drying emulsion paint films without flucculation. Improves hiding power of TiOi, film integrity and thixotropic properties. SANTOMASK II ODOR-MASKING AGENT See Pege 67 STYRENE-ALLYL ALCOHOL RJ-100 AND RJ' 101 See Pege 46 SYTON AS-200 COLLOIDAL SILICA DISPERSION FOR WATER-BASED PAINTS Set Pege 64 UREA SOLUTIONS See Pege 63 PAPER CHEMICALS ALUMINUM SULFATE ORGANIC DIVISION FORMULA: Alt(SO.)i 14.5 HiO (dry); Alt(SO)i (Uq.) MOLECULAR WEIGHT: 603.36. STANDARD FORMS: Dry: white powder, ranging to small lumps. Liq: Clear liquid. USES: Paper aixing and water treatment. SHIPPING INFORMATION: Aluminum Sulfate. 100-lb. paper bsgs. FDA status approved by prior sanction. MERSIZE Peper Siting Agent. ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Paata, powder and liquid. GENERAL INFORMATION: Mertit* TFL 70%. 77% and 30% solids paste sizes: Mtreitt RM Dry; a dry granular powder. Mtrtue DFS 70% and 80% : Solid paste sizes used for maximum efficiency in unbleached end semi-bleached papere: Mtriizt CD-2 a 50% solida tolution; Mertite CD-2 a dry powder. USES: Mertite TFL and Mtrtitt RM Dry are forma of chemically fortified rosin-baaed aitea that are ready to uee in a paper mill to reduce sizing costs, improve resistance to ink. water and other aqueous solutions, give better feathering reeiatance and more uni form dependable eizing. Mertite CD-2 and Mtrtit* CD-2 Dry are uaed in conjunction with typical roein eizee to obtain the tame results. SHIPPING INFORMATION: Tank can. 500-lb. ateel drums and 50-lb. begs. Rosin Sizing NOIBN. FDA status: Approved for uee in paper coming in direct contact with food. 0684989 TOWOLDMONOQ43072 \ SALT CAKE SODIUM SULFATE, ANHYDROUS TECHNICAL ORGANIC DIVISION MOLECULAR WEIGHT: 142.06 STANDARD FORM: Powder. TYPICAL ANALYSIS: The 93-95% grade is typical white salt cake. * The 98-99% grade is a special material having a light tan color and NajSOt content of approximately 99% . USES: Manufacture of sulfate pulp and glass. SHIPPING INFORMATION: Salt Cake. Bulk car loads. SANTOBRITE SODIUM PENTACHLOROPHENATE Paper Mill Slimiade. Set Ptgt 65 SANTOSITE SODIUM SULFITE ANHYDROUS ORGANIC DIVISION --LITERATURE AVAILABLE FORMULA: Na,SO, MOLECULAR WEIGHT: 12606 STANDARD FORM: Powder. TYPICAL ANALYSIS: Tan to slightly pink crystalline powder: assay (NaiSOii 97.7% min.: color of filtrate from 10% solution in water not darker than APHA 70. PROPERTIES: Will oxidise to todium sulfate if not kept dry. Normally contains less than 1% sodium chloride: ieea than 0.1% iron: lesa than 0.2% insoluble: lese than 0.2% organic matter. The balance of impurity ia sodium sulfate. The unfiltered water solution has a brown color due to suspended Fe (OHi). Normally all of the product will paea through a No. 20 U. S. Standard aieva. USES: Manufacture of paper, highly efficient in the semi-chemical pulping of straw and wood for paper manufacture. SHIPPING INFORMATION: Sodium Sulfite. 100-lb. paper bags and hopper cart. SANTOSIZE PAPER SIZING AGENT ORGANIC DIVISION GENERAL USE INFORMATION: Santoaize 70% and 60% pale unfortiAed rosin size end Santoeize DSN 70% and 80% FF grade dark roeln size, are ueed in specific applications where higher efficiency Merslze TFL ia not required. SHIPPING INFORMATION: Rosin Sizing Liquid. Tank cars. 800-lb. and 55-gal. drums. FDA status: Approved for use in paper coming in direct contact with food. SCRIPSET 100, 500 SERIES Paper Catling Resins SptcitHy Costing Resins ORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Scripeet 100, 450~Low-viscosity, clsar liquids. Scrips*t 500, 520, 530. 540 ft 550--Free-flowing white powders. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Paper coating reein. Outstanding polyelectrolyte retina which improve the surface characteristic* and printability of paper products and have good wax hold-out propertiea. Alao used as reein binders in city coating*. USES: Paper manufacturing. INDUSTRIAL USERS: Paper and Pulp Industry. SHIPPING INFORMATION: Plastic* Synthetic. FDA status: Regulated. SCRIPTITE SERIES WET-STRENGTH RESINS ORGANIC DIVISION-LITERATURE AVAILABLE 8TANDARD FORMS: Scriplit* 330--Finely divided powder Scriphtt 400--Trans, colloidal solution PROPERTIES AND PERFORMANCE CHARACTERISTICS: Melamine Formaldehyde and Urea Formaldehyde reains. USES: To Impart exceptional wet-strength to paper and paper board. SHIPPING INFORMATION: (310) Plastics, Synthetic Liquid. (330) Plastice Synthetic Dry. FDA status: Approved by prior sanction. SODIUM HEXAMETAPHOSPHATE Set Rsgt 31 STEROX SSeTe PEaRgeO71X OF, NJ OSeieTigEerRusOX DJ AND SYTON P AND P-200 COLLOIDAL SILICA ORGANIC DIVISION-LITERATURE AVAILABLE GENERAL INFORMATION: The application of an extremely fine colloidal aqueous dispersion of silics applied either by spray or roller to multiwall paper bags or most any type of paperboard boxes or liner board will materially reduce slippage between the coated surfaces. Syton P Is proving to be the most effective anti skid agent. USES: For use on paper containers to make slip-resistant coatings SHIPPING INFORMATION: Colloidal Silica, liquid (NB: Freezes 32F. Keep from freezing). 550-lb. drum*. FDA statue: Exempt "generally recognized am safe". TRISODIUM PHOSPHATE, ANHYDROUSand CRYSTALLINE See Page 32 tNOTE: For complete listing of all pulping, paper-making and % coating chemicals, request "Chemicals for the Paper Industry" from Cellu-Chem Department. St. Louis, Miseouri, 63166. J SWEETENERS SACCHARIN (CALCIUM AND SODIUM) U.S.P. See Ptgt 16 DIETOSE CALCIUM CVCLAMATE U.S.P. DIETOSE SODIUM CYCLAMATE N.F. TANNING AGENTS SANTOTAN KR BASIC CHROME SULFATE INORGANIC DIVISION FORMULA: Contains approximately 50% of Cri(SO)j(OH)j STANDARD FORM: Cryatala. TYPICAL ANALYSIS: Dark green cryatala: solution (5:500) clear: basicity (CriOi(SOi) 101-105: basicity men 37.3-39.7; chromium as CfjO> 23.9% min. USES: In chrome tanning of calf, cow and horse hides and sheep- SH1PPING INFORMATION: Tanning Extract Dry NOIBN 100-lb. paper bags. ZINC OXIDE, TECHNICAL INORGANIC DIVISION FORMULA: ZnO MOLECULAR WEIGHT: 81.38 SPECIFICATIONS: Light gray or tan powder assaying 90 0% min. ZnO. GENERAL INFORMATION: This technical grade has been round acceptable in the rubber trade and paper manufacture. SHIPPING INFORMATION: Zinc Oxide Dry. S0-lb. bagi. 0664990 69 TOWOLDMONOQ43073 TEXTILE CHEMICALS BUTVAR RESINS Stt Ptgt 47 CATALYST AC S$ Ptgt 66 QELVATOL RESINS Stt Ptgt 47 LYTRON LATICES Stt Ptgt 46 GELVA RESINS Stt Ptgt 4? RESLOOM MELAMINE Stt Ptgt 60 STYMER COPOLYMER RESINS PLASTIC PRODUCTS AND RESINS DIVISION-LITERATURE AVAILABLE STANDARD FORM: Stymtr LP to vinyl min. soluble with am monium hydroxide; Stymtr S to styrene copolymer resin, soluble in water. PROPERTIES AND PERFORMANCE CHARACTERISTICS: Textile fteeln. Outstanding as siting agents for acetate. Stymtr Lr-26 designed as durable use. Stymtr S Is water soluble removable alee. USES: Site* for filament acetates. INDUSTRIAL USERS: Textiles. SHIPPING INFORMATION! Stymtr LF-25--drums (100 lbs.). g!ymr^^mi^ltiwAll bags (SO lbs.); drums (260 Ibe.). Rail & Truck: SYTON AS-200 COLLOIDAL SILICA DISPERSION Sf Ptffi 64 4 THICKENING AGENTS EMA RESINS Stt Ptgt 61 8ANTOCEL Z AEROGELS INORGANIC DIVISION-LITERATURE AVAILABLE Designed to perform thixotropic end thickening functions in polyvinyl chloride plaittooto ana In various plasticiser disperaioui. Oners the following advantages to vinyl plastlsol manufacturers: more efficient on e coet/performence basis; 66-10% more efficient thickening power; at low and shear rates; imparts higher degree of thixotropy at equivalent loading levels; less tendency to eettTe. WOOD PRESERVATIVE MONSANTO RENTA Ptnltchlorophtnol, Ttchnictl. Stt Ptgt 66 70 SURFACE ACTIVE AGENTS, DETERGENTS and BLEACHES ANIONIC SURFACE ACTIVE AGENTS DDBSA 99-B Alkyl Btnitnt Sulfonic Acld-8iodtg>tdtblt INORGANIC DIVISION MOLECULAR WEIGHT! 316 STANDARD FORM! Liquid. GENERAL INFORMATION: It to produced by the aulfonstlon of refined linear alky] benzene with 80> and contains a minimum amount of free sulfuric acid. It can be neutralized with various bases. DDBSA 99U-B AlkylBtnitnt Sulfonic Acid Anhydtoui-Biodt- gttdtblt INORGANIC DIVISION MOLECULAR WEIGHT: 316 STANDARD FORMi Liquid. TYPICAL ANALY8IS: Active 08% tote! sulfete ae HtSOi. 0.7% ; water end unsulfonated matter 1.3: GENERAL INFORMATION: DDBSA 00U-B to a concentrated eulfonic acid derived from the SOi eulfonetion of refined linear atkyl bentene. SANTOMERSE NO. 1-B Alkyl Btnitnt Sulfontlt-Bio- dtgrtdtblt INORGANIC DIVISION PROPERTIES; Neutral flakes, grenular and powder form. 40% active. GENERAL INFORMATION: Sontcmtrtt No. 1-B to an anionic high-foaming, all-purpoee surface active agent which to stable in acid and alkaline solution! It to used In all type* of detergent formulations and has wide application wherever good wetting is essential. Product he* reedy blending end fast pouring qualities. SHIPPING INFORMATION: Washing compound, dry. 76-lb bags sod 176-lb., 2O0-lb. and 225-lb. arums depending on type of fleke. SANTOMERSE 8S-B Alkyl Btnitnt Sulfontlt-Biodt- g/tdtblt INORGANIC DIVISION PROPERTIES; Neutral flakes or powder. 66% active. 13% sodium sulfate, 1% moisture. GENERAL INFORMATION: Sonfomertt 80-B to an 66% active anionic surface active agent designed for use where e high active content to desirable and the presence of smalt amounts of sodium sulfate to not detrimental. Has F.D.A. approval for indirect food additives. SHIPPING INFORMATION! Washing compound NOIBN nowder, 200-lb. fiber drums. 0684991 TOWOLDMONOQ43074 SANTOMERSE ME-B SLURRY Sodium Alkyl Ben- tene SuHonete - Biodegrsdeble INORGANIC DIVISION PROPERTIES: Slurry. TYPICAL ANALYSIS: Active 57-60%. total solids 60-63%. Unulfonated oils ia baais 1.0% (P.E. extraction), alcohol insoluble GENERAL INFORMATION: Sonfomerse ME-B Slurry ia a special high aolid. high active linear alkyl benzene sulfonate developed for detergent formulations. I'SES: Ueed In apray or drum dried products as well aa liquid detergents. Light color gives flexibility in finished products color. NONIONIC SURFACE ACTIVE AGENTS STEROX AJ Trldectnoltthylene oxide condentetet. (Polyoxy ethylene ether) INORGANIC DIVISION STEROX AJ-100 Polyoxyethylene Ether INORGANIC OlVISION--LITERATURE AVAILABLE . Sterox AJ-100 ia 100% active in a soft paste I Sterox AJ la 65% active and a clear liouid. Each la soluble In water, and produce* a moderate amount of foam. Extremely efficient aa a aurface active agent. USES: Recommended for powdered detergent formulatione, aa an emulalfler In a variety of applications. and aa an aid In textiles, paper and leather processing. Product has good acid stability. SHIPPING INFORMATION: Polyoxyethylene Ether. Tank cart and tank trucka; 450-lb. drums. STEROX AWS Built nonlonic detergent INORGANIC DIVISION-LITERATURE AVAILABLE PROPERTIES: Built dodIodIc detergent with controlled sudsing. Has two optical brighteners for both cotton and synthetic fabrics. pH of a ,2o% solution in water ia 10.3. USES: Deaigned for the automatic home laundry machines and industrial cleaning job*. Low audaing quality of AWS reduces laundry machine breakdowns and increasee cleaning ability. SHIPPING INFORMATION: Washing compound -- dry. Tank cars and tank trucks; 100 pound bags and drums. STEROX CD Tell olleihytene oxide condensete (Polyoxyethylene ester) INORGANIC DIVISION-LITERATURE AVAILABLE PROPERTIES: Nonlonic. 100% active aurfsce-actWe agent with high detergent action accompanied by low foaming. Compatible with other type detergents and builder materials. Light amber liquid. USES: Mixed with builder materials, an unusually high cleaning action Is obtained with little audaing. Used as a dedusting ana conditioning agent for detergent compositions. Used In insecticide end herbicide formulations. Excellent rewetting agent for paper towels and products to Increase water absorbency. SHIPPING INFORMATION: Washing Compound NOIBN Liquid. Tank cars and 475-lb. drums. STEROX DF Dodecy! phenol-ethylene oxide condensete. (Alkyl eryl polyoxyethylene ether) INORGANIC DIVISION PROPERTIES: Liquid, 100% active miscible with water at room temperature. Soluble in nonpolar solvents. Excellent emulsifier. Chemically stable, low foaming. USES: Designed as an intermediate for sulfation, thus producing high foaming, highly soluble surface active agents (or liquid deter gents. Per ae, an excellent emulsifier, oil soluble, useful in metal cleaning, textile and paper processing, etc. SHIPPING INFORMATION: Polyoxyethylene Ether. Tank cars and tank trucks: 470-lb. drums . TDA STATUS: Regulated. STEROX DJ Dodecy/ phenol-ethylene oxide condensste (Alkyl eryl polyoxyethylene ether) INORGANIC DIVISION PROPERTIES: Liquid. 100% active, soluble in water. Low odor and color. Higher molecular weight than Sterox DF Chemically stable, low foaming. Optimum detergency. USES: For low foaming powdered and liquid detergents Excellent detergency properties. Low odor and color levels give more sales appeal to finished detergents. SHIPPING INFORMATION: Polyoxyethylene Ether. Tank cars and tank trucka. 470-lb. drums. FDA STATUS: Regulated. STEROX NJ Nonytphenol-ethylene oxide condensete. (Alkyl eryl polyoxyethylene etherj INORGANIC DIVISION PROPERTIES: Liquid. 100% active soluble in stable, medium foam. Low odor and color levels. r. Chemically USES: General purpose nonionic for use in powdered end liquid detergents, textile, leather end paper processLog. metsl cleaning, toxicant formulations, deduster, etc. SHIPPING INFORMATION: Polyoayethylene Ether Tank cart and tank trucks; 470-lb. drums. FDA 8TATU9: Regulsted. STEROX NK Nonyl phenol-ethylene oxide condensete (Alkyl erylpolyoxyethylene ether) INORGANIC DIVISION PROPERTIES: Liquid, 100% active aoluble in water Cloud point of 66-70*C., chemically stable, medium foam Slightly higher molecular weight than Sterox NJ. USES: Sltrox NK has excellent solubility end solubilizing power which gives it good watting and detergency properties SHIPPING INFORMATION: Washing compound. NOIBN liquid polyoxyethylene ether. Tank car and tank trucks; 470-lb unlined steel drums. BLEACHING COMPOUNDS ACL SANITIZER AND BLEACHING COMPOUND INORGANIC DIVISION-LITERATURE AVAILABLE STANDARD FORM: Powder and granular. A series of solid, organic chlorine liberating compounds, useful as active ingredients in household and commercial laundry bleaches, acouring cleansers, machine dishwashing compounds, sanitizing agents, etc PRODUCT DESCRIPTION: ACL Product Chemical Name ACL-65 ACL-66 ACL-59 ACL-60 Trichloroieocyanuric Acid l(Monotrichloro) tetri-(monopotaaeu dichloro)!-penta-lsocysnurate Potassium dichloroleocyanurate Sodium dichloroisocyanurate SHIPPING INFORMATION: Bleach Assistant Compound NOIBN. Fiber drums with polyethylene bag liner. ACL-85 and ACL-59 270-lbs. net. ACL-70 225-lbs. net. ACL-60: powder -- 240-lb. net; granular -- 2001b. net. DETERGENT INTERMEDIATES ALKYLATE 21S, 226 AND 230 (Alkyl Beniene- Biodegredeble) INORGANIC DIVISION FORMULA: CiiHnC.H, MOLECULAR WEIGHT: 215 S3lT41 225 240-248 230 255-264 STANDARD FORM: Liquid. TYPICAL ANA,LYSIS:: Appearance, water white liquid. Residue. lees than 0005 volume %; Sp. Or. (60/60<'F.) 0 85-0 86. Color (before sulfonatlion) lIes_s_ t.han .1.0....A..P...H...A...:...R...e..f.r.a..c..t.i.v..e....I.n..d..e. x 25aC -- 1.4615-1.4830, Bromine No. 0.05; Unsulfonaiables 10% USES: Alkylate is an ether extraction alkyl benzene 1.2% specifi cally designed for use in the manufacture of synthetic organic detergents. Product is low 2 phenyl. SHIPPING INFORMATION: Petroleum Alkylate Detergent Intermediate. 8,000, 10,000 and 20.000 gal. tank cars 3 yo-lbs net (440-lbs. gross) weight, black iron drums, nonreturnablr 0684992 TOWOLDMON0043075 itffawitiiirii'flftM 1 DODECYLPHENOL mi,inwnt> INORGANIC DIVISION STANDARD FORM: Liquid. TYPICAL ANALYSIS: Appearance, clear apar^m* liquid; Odor, characteristic phenolic; Color. 50 APHA; 95% Distillation Range, 317-327C.; Hydroxyl No. 212; Refractive Index (27C.), 1.5054; Water 0.02%. USES: Dodecylphenol is an alkyl phenol which is combined with ethylene oxide. PCli or POCb for use in the paper, leather, and textile industry. SHIPPING INFORMATION: Dodecylphenol (Chemicals. NOIBN); 415-lbs. net (465-lbs. gross: Heresite lined drums; 10,000 and 8,000 gal. tank cars; 4.000 gal. tank trucks. NONYLPHENOL (Alkyl Phenol) INORGANIC DIVISION STANDARD FORM: Liquid TYPICAL ANALYSIS: Appearance, clear sparkling liquid; Odor, characteristic phenolic; Color. 35 APHA; 95% Distillation Range, 294-304eC.; Hydroxyl No. 245; Refractive Index (27C.). 15110; Water 0.02% . USES: Monsanto's nonylphenol is an alkyt phenol specifically de signed for use in the manufacture of synthetic organic detergents. SHIPPING INFORMATION; Nonylphenol (Chemicals. NOIBN,; 415-lb. net (465-lbs. gross) Heresite lined drums, 10,W0, d.WO and 4,000 gallon tank cars. VACUUM PUMP FLUID SANTOVAC 5 Vacuum Diffusion Pump Fluid ORGANIC 01 VISION -LITERATURE AVAILABLE STANDARD FORM: Liquid. TYPICAL ANALYSIS; Viscosity at 100F - 360 l; vapor pressure (U` 25C., 2.7 X 10 10 torr; boiling point at 0.5 >rr, 270C ; molecular weight, 446; density, g/cc, 1.20. PROPERT1ES: A light straw color, 6ve ring polyphcnyl ether with excellent thermal and oxidation stability which provides low ulti mate pressure without the need for deep refrigeration, easy clean up and very low backstreaming characteristics. USES: As vacuum diffusioi. pump fluid in applications such as apace chambers, particle accelerators, vacuum tube evacuation, mass spectrometers and research projects. SHIPPING INFORMATION; Chemicals NOIBN. case lots, 5-gal cans; 1-gal. cans; 1-qt. cans and ml. bottles. 0664993 72 tl TOWOLDMONOQ43076 r DISTRICT SALES OFFICES ALL DIVISIONS AKRON, OHIO 44313 260 Springside Drive Montrose Development Perk Tel. (216) 666-4111 ATLANTA. GEORGIA 30326 Lenox Towers East 0400 Peachtree Pd. N. E. - Suite 1711 Tei. (404) 577-2260 BOSTON: MASSACHUSETTS 02149 Everett Station Tei. (617) 387-5010 CHICAGO, ILLINOIS 3158 Des Plaines Ave. Des Plaines. Illinois 60018 Tel. (312) 296-6688 CINCINNATI. OHIO 45206 1501 Madison Road Tel. (513) 751-6707 DETROIT. MICHIGAN 48235 600 Northland Towers East Tel. (313) 357-0910 HONOLULU. HAWAII 96812 205 Pacific International Bldg. 677 Ala Moena Blvd., P. 0. Box 3824 Tel. (808) 531-2744 HOUSTON. TEXAS 77002 1300 Main Street Tel. (713) 223-4011 LOS ANGELES. CALIFORNIA 90022 6670 E. Flotilla St. Tel. (213) 723-2492 NEW YORK. NEW YORK 10017 277 Park Avenue Tel. (212) 922-4111 ST. LOUIS. MISSOURI 63166 800 N. Lindbergh Btvd. Tel. (314) 694-1000 SAN FRANCISCO BAY AREA 2710 Lafayette. Santa Clara, Calif. 95052 Tel. (408) 243-0414 SEATTLE. WASHINGTON 98104 911 Western Avenue Tel. (206) 622-4203 SPRINGFIELD. MASSACHUSETTS 01101 730 Worcester Ave. Tel. (413) 788-6911 WILMINGTON. DELAWARE 19803 2005 Concord Pike. Fairfax Tel. (302) 658-6531 Additional District Offices are maintained by: Agricultural Division ALLENTOWN, PENNSYLVANIA 18104 Park Professional Building 2200 Hamilton Street Tel (215) 437-6471 DES MOINES. IOWA 60310 312 Merle Hay Tower Tel. (616) 276-8503 FREMONT. NEBRASKA 68025 150 South Main Street Tel. (402) 727-1230 INDIANAPOLIS. INDIANA 46205 Suite 21B, 4000 Meadow* Drive Building Tel. (317) 647-8146 LULING, LOUISIANA 70070 P. 0. Box 174 Tel. (504) 784-6263 MANKATO, MINNESOTA 56001 111 Madison East Tel. (607) 387-3406 MEMPHIS. TENNESSEE 38104 303 Union Plata Building 1836 Union Avenue Tel. (901) 278-7811 MUSCATINE, IOWA 62761 P. 0. Box 473 Tat. (319) 263-1331 Hydrocarbon* & Polymer* Divl*lon-Llon Oil EL DORADO, ARKANSAS 71730 lion Oil Building Tal. (SOI) 863-3111 JACKSON. MISSISSIPPI 39209 P. 0. Box 10937, Westland Station Tat. (601) 352-3648 N. LITTLE ROCK, ARKANSAS 72119 410 West 8th Street, P. 0. Box 6821 Tel. (501) 376-2437 MEMPHIS. TENNESSEE 38113 1023 Riverside Drive, P. 0. Box 13246 Tel. (901) 946-4461 Organto DlvUlort (Rubber Instruments) AKRON. OHIO 44311 920 Brown Street P. 0. Box 2307 Tet. (216) 434-1962 Plaatio Product* & Retin* Division KENILWORTH. NEW JERSEY 07033 North Seventh St. * Monroe Ave. Tel. (201) 276-2900 Textile* Division ATLANTA. GEORGIA 30303 Atlanta Merchandise Mart 240 Peachtree St.. N. W. Tel. (404) 677-2260 CHARLOTTE, NORTH CAROLINA 28210 6230 Fairvlew Road, Suite 400 Tel. (704) 364-0110 GREENVILLE, SOUTH CAROLINA 29606 McAlister Plata P. 0. Box 6564, Station B Tel. (803) 239-9171 NEW YORK, NEW YORK 10001 350 Fifth Ave. Tel. (212) 566-6100 MONSANTO. S00 N. LINDBERGH BLVD., ST. LOUIS. MISSOURI S31SB 6/69 0684994 I -2261 -0669- 10 UTHO IN USA TOWOLDMONOQ43077 068499$ MONSANTO j 800 N. LINDBERGH BLVD. j ST. LOUIS, MISSOURI 63166 TOWOLDMONOQ43078 [taai-rttiig , ,ri nr TOWOLDMON0043079