Document ppV9Zr85wDJv4BrQGDVGR26V7
January 28, 1972 Supersedes TEX-995 Dated 9/8/71
PLAINTIFF'S EXHIBIT 1
ACME. TEXAS PLANT FORMULA SPEED SET JOINT COMPOUND WHITE TEX-995
(% hour working cement)
DESCRIPTION OF PRODUCT:
For use in reinforcing and conceiling joints and nailheads.
FORMULA Raw Material
Func tion
R.M. Spec. Percent Lbs/ 3a tch
*Sodium Citrate Natrosol 250 HXR Gelvatol RS-6278C Gelva GP702 Asbestos SG210 Asbestos 7RF09 Mica p80H Defoamer Mill Vanicide Denscal
Retarder Thickner Adhesive Adhesive Fiber Filler Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Fungicide Plaster
134 170 162 167
-
9 11 196 126 -
0.10 0.25 1.50
0.50 1.75 5.00 5.00
.10 .10 85.70
100.00
0.750 1.875 11.250
3.750 13.125 37.500 37.500
.750 .750 642.750
750.000
*Adjust quantity according to set time requirements
WORKING CONSISTENCY: Specifications
Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
62 58
60
SETTING TIME: Spec ifica tions
Refer to Plant Testing Procedure No. 6 (slow set)
90 min.
40 min.
60 min.
WORKING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 33. Must be plastic and buttery working; free of grit or coarse'particles.
BONDING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE: Spec ifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and very few, if any, cracks in the thinner half of the wedge.
-/ denotes change EDO:e1z
SGP 0018407
September 8, 1971 NEW FORMULA TEX-995
ACME. TEXAS PLANT FORMULA SPEED SET JOINT COMPOUND WHITE TEX-995
hour working cement)
DESCRIPTION OF PRODUCT: - For use in reinforcing and conceiling joints and nailheads.
FORMULA Raw Material
Function
R.M. Spec. Percent Lbs/Ba tch
*Sodium Citrate Natrosol 250 HXR Gelvatol RS-6278C Gelva GP702 Asbestos SG210 Asbestos 7RF09 Mica p80H Defoamer Mill Vanicide Denscal
Retarder Thickner Adhesive Adhesive Fiber Filler Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Fungicide Plaster
134
0.10
0.750
170
0.25
1.875
162
2.00
15.000
167
0.50
3.750
-
1.50
11.250
9
3.25
24.375
11
5.00
37.500
196 .10 .750
126 .10 .750
- V7.2.6 86-.05 " <645v^75
100.00 750.000
^Adjust quantity according to set time requirements.
WORKING CONSISTENCY: Specifications
- Refer to Plant Testing Procedure No. 32
Maximum
Minimum
Average
62 58
60
SETTING TIME: Specifications
- Refer to Plant Testing Procedure No. 6 (slow set)
90 min.
40 min.
60 min.
WORKING PROPERTIES Specifications.
Refer to Plant Testing Procedure No. 33. Must be plastic and buttery working; free of grit or coarse particles.
BONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE: Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge and very few, if any, cracks in the thinner half of the wedge.
EDO:dek
SGP 0018408
SGP 0018406
ASBESTOS CONTAINING PRODUCTS