Document ppLQn5Dk1byn01EevDdnjKYaX

APPENDICES; OSHA ASEiESTOS STANDARDS I.CONSTRUCTION STANDARD * A.OSHA REFERENCE METHOD B. DETAILED SAMPLING ANALYSIS PROCEDURES * C.FIT TESTING PROCEDURES--QUALITATIVE & QUANTITATIVE * D.MEDICAL QUESTIONNAIRES * E..CHEST ROENTGENOGRAMS--INTERPRETATION 8< CLASSIFICATION F..WORK PRACTICES/ENGINEERING CONTROLS FOR MAJOR WORK G.WORK PRACTICES/ENGINEERING CONTROLS FOR MINOR WORK H..SUBSTANCE TECHNICAL INFORMATION I.MEDICAL SURVEILLANCE GUIDELINES 11.GENERAL INDUSTRY STANDARD * A.OSHA REFERENCE METHOD B. DETAILED SAMPLING S< ANALYSIS PROCEDURES * C. FIT TESTING PROCEDURES--QUALITATIVE 8< QUANTITATIVE * D. MEDICAL QUESTIONNAIRES * E.CHEST ROENTGENOGRAMS--INTERPRETATION Z< CLASSIFICATION F.WORK PRACTICES/ENGINEERING CONTROLS FOR AUTO BRAKE WORK G. SUBSTANCE TECHNICAL INFORMATION H.MEDICAL SURVEILLANCE GUIDELINES ABS-060713 LAM 031289 APPENDIX F; AUTOMOTIVE BRAKE REPAIR COMPLIANCE WITH THE (NON-MANDATORY) WORK PRACTICES AND ENGINEERING CONTROLS SHOULD KEEP EXPOSURES BELOW THE ACTION LEVEL A.ENCLOSED CYLINDER/HEPA VACUUM SYSTEM METHOD 1.WHEEL-SHAPED CYLINDER TO COVER AND ENCLOSE THE WHEEL 2. COMPRESSED-AIR HOSE NOZZLE CONNECTED TO CYLINDER 3.HEPA VACUUM TO EVACUATE THE CYLINDER CYLINDER HAS VIEWING PORTS AND COTTON SLEEVES TO PROVIDE ACCESS. COMPRESSED-AIR GUNS ARE BUILT IN. HEPA VACUUM IS CONNECTED; COMPRESSED AIR IS BLOWN IN; VACUUM EVACUATES THE DUST. B.COMPRESSED AIR/SOLVENT SYSTEM METHOD 1.COMPRESSED-AIR HOSE FITTED AT END WITH SOLVENT BOTTLE; DUST IS CAPTURED BY THE SOLVENT MIST (OR COMMERCIALLY-AVAILABLE SOLVENT SPRAY CAN BE USED). 2.RAG IS USED TO WIPE PARTS; DISPOSE OF RAG AS ASBESTOS (Nat allowed in California) ABS-060714 LAM 031290 ACTIVITIES--ASBESTOS COMPLIANCE 6/20/86 OSHA PUBLISHED STANDARDS 7/9/86 OSHA PUBLISHED DRAFT FIELD INSTRUCTION 7/21/86 S?'IH PUBLISHED PRELIMINARY GUIDANCE, Called for -further monitoring 8/27/86 S?'.IH PUBLISHED IMPLEMENTATION MEMO 9/5/86 MFG MEMO RE: ASBESTOS GASKETING, Brochure -from Asbestos Information Association 9/16/86 MFG MEMO RE:SUPPLEMENTAL GUIDANCE, EPA Brake repair informatian 9/22/86 MFG MEMO RE:ASBESTOS SAMPLING PROCEDURES 9/30/86 MFG MEMO RE:SUPPLEMENTAL ASBESTOS COMPLIANCE, Flow chart to determine monitoring requirements 9/30/86 MFG MEMO RE: SUPPLEMENTAL ASBESTOS COMPLIANCE, EPA asbestos abatement project management information 10/9/86 MFG MEMO RE:SUPPLEMENTAL INFORMATION ON COMPLIANCE, EPA--sponsored course listing 10/14/86 DPMC MEMO ASKING FOR HELP IN INTERPRETING CERTAIN ISSUES (e.g. feasibility of negative-pressure enclosures, definition of "small-scale, shortduration," medical surveillance for persons wearing negative--pressure respirators, and feasibility of labeling installed asbestos products) 10/27/B6 MFG MEMO RESPONDING TO DPMC MEMO 10/2B/86 CMD MEMO RE:MEDICAL SURVEILLANCE REQUIREMENTS 1 i/4/86 MFG H?'S CONFERENCE; LOCATIONS REQUEST FURTHER GUIDANCE 11/18/86 MFG MEMO RE:NEGATIVE PRESSURE ENCLOSURES AND OTHER ASBESTOS COMPLIANCE ISSUES, Calling for a task force to investigate the issues. 12/1/86 ASBESTOS IN THE WORKPLACE TRP COMPLETED ABS-060715 LAM 031291