Document pmz7w88LMLGJBryg0qrMgBoLa

Bendix The Bendix Corporation Executive Offices Bendix Center Southfield, Michigan 48076 Mr. E. W. Drislane Executive Director Friction Materials . Standards Institute Bergen Mall Office Center E. 210 Route 4 Paramus, NJ 07652 February 11, 1981 Re: Notice to Membership on Hazardous Waste Disposal Dear Mr. Drislane: I have received Mr. Diffenderfer1s recommendated bulletin and find it acceptable for distribution. The missing information on page 1 is "Vol. 45, No. 229, Page 78538 dated 11/25/80" as the Federal Register notice removing asbestos in its raw form from the list of hazardous waste. Sincerely, Safety & Protection Services JWA/gvp An Equal Opportunity Employer M F FMSI 07086 FRICTION MATERIALS STANDARDS INSTITUTE, INC., E-210 ROUTE 4, PARAMUS, N.J. 07652 February 19, 1981 To: Health and Environmental Affairs Committee Subject:- Brief biography on expertise of Committee Members On January 23, 1981 I wrote the Members of the Committee asking for a brief biography of each Member's business experience background. This was requested based on a possible questionnaire to the Member ship. It is noted on Page 9 of the Minutes of the January 14, 1981 meeting. I have received the attached biographies. I would appreciate it if those who are not listed send in their "two lines". Also, those who are on the list may wish to revise or otherwise change the word ing, to more closely conform to the format used by others. I do not know how certification and the like should be listed, and will defer to others on this. I will need this before we send the questionnaire--now in its forma tive stage--to the Board of Directors. EVID/erc Enc: E. W. Drislane Executive Director FMSI 07087 J. W. Armstrong, CSP, PE Employee accident protection, OSHA appeals and compliance, workers compensation cost control, industrial health and hygiene, fire pro tection, air, water and solid waste control (EPA), industrial security, consumer product safety and international safety and health regulations. R. L. Armer Plant Engineering, Project Management-Environmentatl, Materials Development W. E. Milligan Safety Manager - lead, noise and asbestos control, mechanical guard ing, employee training, workers compensation, medical surveillance J.O. Pearson Safety Engineering, local exhaust ventilation (engineering) and industrial hygiene (Certified by ABIH) C. H. Borcherding Industrial hygiene, air, water and solid waste. Some expertise in plant engineering (primarily processes and ventialtion design) safety engineering. Board Certified in industrial hygiene and safety. D. E. Stone Plant and manufacturing engineering, maintenance engineering, design and application of industrial exhaust systems and collectors, manage ment of environmental affairs - EPA, OSHA, TSCA, RCRA, etc. COMMITTEE MEMBERS - OCCUPATIONAL AMD ENVIRONMENTAL EXPERTISE FMSl 07088 FRICTION MATERIALS STANDARDS INSTITUTE, INC., E-210 ROUTE 4, PARAMUS, N. J. 07652 January 23, 1981 To: Health and Environmental Affairs Committee Subject: Brief "bibliography" on expertise of Committee Members At the January 14, 1981 Committee Meeting, a proposed questionnaire for the Membership was discussed. At that time it was decided that the Institute would advise the Board of Directors on the background or expertise of the Committee Members. We're asking for a "two-line" capsule background--not educational or work experience--with such background as the following: industrial hygiene, plant engineering, waste disposal, safety engineer, environmental consulting, etc. It is expected that many will have more than one "specialty." Would you please send in a "two-line" bibliography which I can assemble on Committee Member expertise. EWD/ere E. W. Drislane Executive Director FMSI 07089 D#/re-*/j a> J. W. Armstrong, CSP, PE Employee accident protection, OSHA appeals and compliance, workers compensation cost control. Industrial health and hygiene, fire pro tection, air, water and solid waste control (EPA), Industrial security, consumer product safety and international safety and health regulations. R. L. Armer ,, Plant Engineering, Project Management-Environmentatl, Materials Development ' W. E. Milligan Safety Manager - lead, noise and asbestos control, mechanical guard ing, employee training, workers compensation, medical surveillance J.O. Pearson Safety Engineering, local exhaust ventilation (engineering) and industrial hygiene (Certified by ABIH) C. H. Borcherding / Industrial hygiene, air, water and solid waste. * Some expertise in plant engineering (primarily processes and ventialtion design) safety engineering. Board Certified in industrial hygiene and safety.,^ - ' A e. Mfit** /u*PL/.i*r/cM g/* tiTT yyrrtzMs- a*jg> ccu-ecrofis-j fitter r/u. AFFfltf**' - Pt\/ostn\J ts'Cr, fi Bfc, FMSI 07090 The Bendix Corporation Executive Offices Bendix Center Southfield, Michigan 48076 Mr. E. W. Drislane Executive Director Friction Materials Standards Institute Bergen Mall Office Center E. 210 Route 4 Paramus, NJ 07652 February 6, 1981 Dear Mr. Drislane: Attached is the "two line" bibliography for inclusion in the Committee summary of expertise. Sincerely, Safety & Protection Services JWA/gvp Attach. An Equal Opportunity Employer M 'F FMSI 07091 James W. Armstrong, C.S.P, P.E. Employee accident protection; OSHA appeals and compliance; workers compensation cost control; industrial health and hygiene; fire protection; air, water and solid waste control (EPA); industrial security, consumer product safety and international safety and health regulations. FMSI 07092 January 29, 1981 Mr. E. W. Drislane, Executive Director . Friction' Materials Standards Institute, Inc. E-210 Route 4 '.*''* ;'t ff,7'\ New Jersey 07652 ' ` !!iSg Drislane *> ' In response" to' your request of January 23rd for ,, a "two-line" bibliography, my background is as follows: Plant Engineering Proj ect Management - Environmental Materials Development -. If , further information is needed please contact me. v.....^ '...- " , > * - - " Sincerely,"' nr^ ` - V* - ; ` : rf?,', "V ' ' Russell' L. Armer - - : Director of Operations rJ TIT A . -- . A .. t ''rt;*V'-*\V*' V* * r.`^< ..* . ' ' .... * " ,, ,. . : \vr-s&a; - ivatf-v.. Airport Lon* SmifHville, Tnnnse 37166 615/597*6700 FMSI 07093 MOLDED MATERIALS COMPANY Division of Carlisle Corporation P.O. Box P, Gillis Avenue Ridgway, Pennsylvania 15853 (814) 773-3185 January 28, 1981 Mr. E. W. Drislane Friction Materials Standards Institute, Inc. E-210, Route 4 Paramus, NJ 07652 Dear Ed: The following is a summary of my experience or "expertise:" Title: Safety Manager - lead, noise and asbestos control. mechanical guarding, employee training, workers' compensation, medical surveillance. We also have an Industrial Hygienist who is proficient at the following: asbestos air sampling and counting - NIOSH certified, hazardous waste, all facets of the new lead standard, employee training, ventilation, hearing conservation. Should you need further information, please contact me. Sincerely MOLDED MATERIALS COMPANY DIVISION CF CARLISLE CORPORATION Wn. E. Milligan Safety Manager WEM:gle FMSI 07094 CORPORATE HEADQUARTERS 100 OAKVIEW DRIVE, TRUMBULL, CONNECTICUT 06611, U.S.A. (203) 371-0101 February 2, 1981 Mr. E. W. Drislane Executive Director Friction Materials Standards E-210 Route 4 Paramus, NJ 07652 Institute, Inc. Dear Mr. Drislane: Referring to your memorandum dated January 23, 1981 asking for a brief bibliography, please be advised that my background consists of safety engineering, local exhaust ventilation (engineering) and industrial hygiene (Certified by ABIH) Si, ' John 0. Pearson ra FMSI 07095 An 1C Industries Company Abex Corporation Environmental Control 4550 West 26th Street Chicago, Illinois 60623 (312) 521-3210 January 27, 1981 Mr. E. W. Drislane Executive Director Friction Materials E-210 Route 4 Paramus, NJ 07652 Standards Institute, Inc. Dear Ed: Your letter requesting a "capsule background" arrived, today, Will there be minutes of the meeting which I missed? My capsule follows: { 'XA / j \y*~- Industrial hygiene, air, water, and solid waste. Some expertise in plant engineering Cprimarily processes and ventilation design), safety engineer ing. I hope this is the material you desired. In industrial hygiene as well as safety, I am board certified. CHB:EJ FMSI 07096