Document pmdoB3E1LRG5Yb9Xj6OVgmb7B

Metal Weatherstrips The Higgin Manufacturing Co. Newport, Ky. Manufacturers of Metal Weatherstripping for Windows and Doors and Metal Access Panels for Heating and Plumbing Systems. Representatives in Principal Cities HIGGIN I ALL METAL 1 Weatherstrips HIGGIN .1 ALL METAL IL Access Panel .Higgin all-metal weatherstrips are distinctly different from those of other manufacturers. Higgin not only has the usual metal strip which is fitted to the four sides of the window frame, but also a special spring bronze insert strip that fits into the groove of the window sashl Thus a metal-to-metal contact is estab lished! The spring bronze insert literally hugs the window, and provides absolute protection against drafts, dust, dirt, and irritating rattles. Even though the window sash shrinks (as so often happens) the metal-to-metal contact remains totally uneffected--cold air positively cannot gain entrance. The efficiency of the heating system is increased 25 per cent and upwards ! The Higgin Organization, backed by 35 years of constant progress, is fully pre pared to weatherstrip all types of openings -double hung windows, casements and doors. With branches and special repre^ sentatives in all large cities, Higgin offers you maximum service and co-operation plus a brand of weatherstripping without equal. Space here does not allow the reproduction of test data on the Higgin Insert Equipment prepared at the University of Wisconsin. A folder however is available covering this test and copies will be sent on request. The Higgin All Metal Access Panel was designed to meet a pressing need for an inconspicuous flush panel for access to critical places in Heating, Plumbing and Refrigerating systems. The panel is entirelyof metal. They are made as a unit. No assembling at the job. Installation is simple and no special framing or grounds are necessary. The panel is com posed of a frame Hinged type pond in ceiling. l" i i; Tka Either hinged or removable Aid and lid. The may be fumiehed. V- frame is in one piece with a continuous angle on the inside, forming a rabbet for the lid. Perforated.^ angles are spotwelded to outside of frame for fastening and plaster key. On the smaller panels, friction catches hold lid in place. For the larger sizes, re taining clips and special cam fasteners are used. Concealed hinges may be provided if desired in place of the retaining clips. Panels may be installed in walls faced with plaster, tile or marble. They can be painted, decorated or papered over. Higgin All Metal Access Panels are ideal (or use in Hospitals, Apartment Houses, Hotels, Residences, Offices and other Buildings. Write for Complete Descriptive Literature 736 Meters, Steam Builders Iron Foundry 9 Codding Street Providence, R. I. Chicago, III--........ ......... New York, N. Y------------Philadelphia, Pa---------- Pittsburgh, Pa--........ -- Atlanta, Ga..................... Buffalo, N. Y..................... Charlotte, N. C----------- Dallas, Texas-------------Detroit, Mich--............ Los Angeles, Calif-----Salt Lake City, Utah... San Francisco, Calif... Seattle, Wash-------------- St. Louis, Mo---------------Troy. N. Y------------------------- Branch Offices and Representatives .....................................................................................................812 Peoples Gas Building ...............................................................................;...................................25 Church Street ............................................................................................................907 Elverson Building ................................................................................................................1403 .Oliver Building .............,,...................................Mr. William F. Wilcox, 4th Nat'l. Bank Building ........................................Empire Equipment Co.. 310 McKinley Ave., Kenmore .................................................................................................Grinnell Co., P. O. Box 336 ...........................................................--_Morey & Morey, 417 Praetorian Building ..........................................................--..Poe Company, 2842 W. Grand Boulevard ...............................................................................Mr. Percy. Keatinge, Black Building __________________________________ __________Ambler & Riter. -Kearns Building ................................................................Mr. Percy Keatinge, Monadnock Building ..........................................................................California Filter Co., 514 Fourth Ave. ........................................................Power Equipment Co.. 5473 Delmar Boulevard .........................................................:.Industrial Equipment Co., Mt. Pleasant Ave. Builders of the Venturi Meter, Oriflo Meter, Shunt Steam Meter, Etc. SHUNT STEAM METER The Shunt Steam Meter fills the need for a low priced, practical steam meter which is easily installed and accurate over a. wide range. It is used to advantage in measuring steam sold or in checking the distribution of steam (also air or gas) to various buildings, departments, machines or processes. Illustration shows the complete Meter. An orifice in the main line of flow deflects a portion of the steam through nozzles and against the turbine located in the shunt circuit out of the main line of flow. The turbine shaft extends through a housing into a condensation chamber below the main line. A damping fan attached to this shaft operates under water, keeping the speed low and eliminating bearing trouble. Magnetic drive between this chamber and the counter mechanism protects the latter from moisture. The meter is installed as a unit in 2,-3 and 4-in. lines. For larger size mains a small meter is installed m a by-pass line around an orifice in the main line. Shunt Steam Meter. Type KS. Steam Pressure Rated Capacity of Saturated Steam--Lbs. per Hour (Meters with largest orifice) Gauge 2" Meter 3' Meter 4" Meter 6* Meter 8' Meter 10' Meter I2T Meter Low Pressure Meters 0 5 10 15 20 30 40 50 600 800 1000 1200 1400 1650 1800 2000 1,400 1,900 2,350 2,750 2,950 3,400 3,750 4,050 2,530 3,350 4,170 4,750 5,150 5,850 6,450 7,000 5,660 6,500 7,220 7,860 8,480 9,550 10,500 11,400 9,850 11,300 12,600 13,700 14,700 16,600 18,200 19,800 15,200 17,500 19,400 21,100 22,600 25,600 28,200 30,500 19,000 21,800 24,200 26,300 28,300 31,900 35,000 38,000 Standard Meters'" 50 75 100 125 150 175 200 225 250 2650 3650 4150 4600 5000 5350 5700 6000 6300 6,000 8,250 9,500 10,500 11,400 12,300 13,000 13,700 14,400 10,600 14,600 16,600 18,300 20,000 21,400 22,700 24,000 25,200 22,200 25,800 29,000 31,800 34,400 36,800 39,000 41,200 43,200 39,000 45,400 51,000 56,000 60,500 64,800 68,600 72,400 76,000 60,500 70,500 79,200 86,800 94,000 100,000 107,000 112,000 118,000 75.500 . 88,100 99,000 109,000 117,000 126,000 133,000 140,000 148,000 Extra Heavy Meters 275 300 6600 6900 15,200 15,700 26,500 27,500 45,000 46,800 79,400 82,500 123,000 128,000 154,000 160,000 Table shows rated capacities only. Minimum Capacities equal one-tenth tabulated quantities. Bulletin 255 gives complete information. 737