Document pezGEJxmaB0L3g1rj1M3z146k

TO: J. E. Wujciga -3- RE: Victocor Body With Yieldable Fire Ring Design May 20, 1968 Some work which is currently being done. We have started work to convert one final close die so as to set it up, upside down to see if we can aid in solving our chip problem. Gaskets will be made this way and shown to Inspection and Product Engineering. ; | suggest "GO" and "NO GO" gages to be made to aid in checking > the incoming wire rings. Periodic X-Ray should be taken on a variety of : j\) part numbers to help in detecting problems. Finally I suggest that the method of loading the partial close V die to be as follows. 5; The operator picks up the fl^ng*with one hand, picks up4the S wire with the other, mates them partly together, then inserts thd \ assembly Into the die. ^ This Is a double check by the operator, one by feel of hand | f and the other by sight. I!understand most operators do it this way now. All the above corrective steps taken and the future steps planned will mean nothing if the Controls and Standards are not insisted , upon. G. Gambino Tool Engineering VPD`91-0002962