Document pewaqNGb3zk4RBK0LqJdk1nRX

79-A RY. subject: TENNESSEE COAL A IRON DIVISION -- UNITED STATES STEEL CORPORATION MANUFACTURING SPECIFICATION Shearing and unnaw. Fairfield Sheet Mill nror. Finishing_____ INSPECTION SPECIFICATION TOLERANCES - HOT ROLLED SHEETS M. . Nrt. IMtiRMa DATE EFF. SHEET No 615 d S 15 8-27-5b r -1 r~t IT 1 nw SO 6 Reap. No. 994 Fc c Approved By: Copies To: Q* C Met. Ch* Q. C Met* Mgr* M*X*R* P.F.T. H.A.C. R.3.M. All Wks. Orp* Fair. Sheet Mill Grp. Shearing & Finishing Grp. Mlsc. Shearing & Finishing Grp. 1. CONTENTS PARAGRAPH NO. 2 3 4 Thickness 5 Width 6 Length 7 Camber 8 Out of Square 9 Resquared Sheets 10 Flatness 11 Drum Stock 12 Hot Rolled Sheet In Colls - Weight 2. GENERAL 2.1 When sheets are ordered to a gauge number, the Manufacturer's Standard Gauge System shall apply unless otherwise specified. 2.2 When sheets are ordered to a gauge number, weight tolerances shall apply and the weight per square foot for the ordered gauge shall be used as a basis. 2.3 When sheets are ordered to a definite thickness, thickness tolerances only shall apply. 2.4 When sheets are ordered to a definite weight (lbs./sq. ft.) weight tolerances only shall apply. 2.5 When other than standard weight or thickness tolerances are specified by the customer, such as all over and nothing under, then the tolerances shall be equal to twice the amounts in the tables in Par. 3 and 4. USHO 000588