Document pEKQaRv9oyjkKyJKD4varxma

Annex_4_Non-Exhoustive Essential Application list B_EEE functionsneeding PFA Function of electrical and electronic equipment (EEE) and per Functions and properties required for EEE 1 Optical function 2 High speed function communication and transmission Piezoelectric function (Conversion/Inversion between the mechanical 3 pRowefeerratondseepleacrtartiecaslhveoelttage) "3. Piezoelectric function" for functional explanation. Sliding function in mechanical section 4 Refer to separate sheet "4. Sliding function" for functional explanation. 5 Display function(Liquid crystal display / LCD) 6 Safety and safety functions 7 Functional surface 8 Semiconductor 9 Thin-film device manufacturing process 10 Energy supply (Battery) 11 Cooling function (Refrigerant) Application list B_EEE functionsneeding PFAS electronic equipment (EEE) and performance requirement to PFAS ma Characteristic of parts and materials to achieve their functions and properties of EEE No interference of light transmission (Transparency) Low transmission loss at high frequencies and wide frequency range Piezoelectricity (pressure-sensitive detection) and good workability and durability Lubricity and abrasion resistance, Elasticity, Low water absorption, Low moisture permeability Low voltage drive and fast response (Low anisotropic refractive index and low viscosity) Electrical insulation and flame retardancy, Chemical resistance, Heat resistance, Durability, Dripping prevention Releasability and Heat resistance, UV protection, Antifouling, Waterproof Photoacid Generators (PAG) , Surfactants, anisotropic/isotropic etching and protective layer formation, low dielectric constants, high thermostability, chemical inertness (to acids, bases, and solvents), and low moisture absorption, low electric permittivity /dielectric loss, low water absorption, and low coefficient of thermal expansion(CTE), In heat transfer fluid uses, electrically non-conducive, and usability in very broad temperature range, and non-corrosive in closed-loop systems Semiconductor manufacturing process and similar microfabrication process Refer to item 8. Semiconductor Refer to Energy section Refer to Fluorinated gases section requirement to PFAS material Performance requirements for materials (PFAS) Low refractive index, High transmissivity + Water and oil repellency, Flexibility, Flame retardancy Low dielectric constant and Low transmission loss + Water and oil repellency, Flame retardancy High Piezoelectricity (High piezoelectric coefficient) + Heat resistance, Flexibility Lubricity, Abrasion resistance, Machineability + Flame retardancy, Durability, Low water absorption, Low moisture permeability Low anisotropic refractive index, Low viscosity, Low voltage drive + Heat resistance, Durability Low dielectric constant, Flame retardancy, Machineability, Chemical resistance + Heat resistance, Durability Water and oil repellency, Heat resistance, Weather resistance Photoacid Generators (PAG) , Surfactants, anisotropic/isotropic etching and protective layer formation, low dielectric constants, high thermostability, chemical inertness (to acids, bases, and solvents), and low moisture absorption, low electric permittivity /dielectric loss, low water absorption, and low coefficient of thermal expansion(CTE), In heat transfer fluid uses, electrically non-conducive, and usability in very broad temperature range, and non-corrosive in closed-loop systems Refer to item 8. Semiconductor (e.g.) Specific parts or components that accomplish the functions or characteristic of EEE Optical fiber, Optical Lens, LED, Monitor/Panel, Fiberglass, Optical adhesive, Protective coating material, Anti-reflective material, etc. Printed circuit boards (Smartphone, PC, Base stations, etc.), Antenna, Cable for High-frequency, Protective coating material, etc. Speaker, Touch panel, Sensor, Actuator, etc. Sliding parts in mechanical section (Bearing, Gear, Roll), Seal material (Packing, O-ring, etc.), Grease, Lubricant, Protective coating material, Epilame, Sealing material, etc. Liquid crystal panel (TV, various monitor), etc. Cable, Pipe/Tube, Package, Seal material, Enclosure, Protective coating material, Sealing material, Protection tube, etc. Releasing and Protective coating material, Film, etc. Photolithography and thin films formed thereby, dry etching, cleaning, heat transfer fluids, resins, manufacturing equipment materials Thin-film device such as MEMS(Sensor, Gyroscope, Inkjet head), SAW filter, Angular velocity sensor, moisture sensitive membrane, etc. Battery Refrigerant (e.g.) Typical EEE Camera, Lighting, Monitor/Panel, Optical cable, Smartphone, etc. Other products in RoHS categories 1- 11 would need this function if they use optical function in control panels for example. Smartphone, PC, Antenna, Base stations, etc. Other products in RoHS categories 1- 11 would need this function if they use communication function to operate or update it for example. Touch panel, Speaker, Various sensor, etc. Other products in RoHS categories 1- 11 would need this function if they use touch panels or sounds for example. Motor, Printer, Industrial equipment, Camera, Display, etc. All the EEE in RoHS categories 1- 11 would need this function. Liquid crystal display panel (TV, Monitor for various device), etc. Other products in RoHS categories 1- 11 would need this function if they use control panels or monitors for example. Cable, Monitor, Medical equipment, Electric appliance, Industrial control equipment, Printer, etc. All the EEE in categories 1- 11 would need this function. Cooking appliance, Touch panel, Smartphone, Printer, etc. All the EEE in RoHS categories 1- 11 would this function. All the EEE in RoHS categories 1- 11 would use semiconductors. Car navigation system, Sphygmomanometer (blood pressure meters), Inkjet printer, Smartphone, etc. Other products in RoHS categories 1- 11 may use thin-film device. All the EEE in RoHS categories 1- 11 would use batteries. All the EEE in RoHS categories 1- 11 would use refrigerant 3. Piezoelectric function 1) Piezoelectric effect: Convert mechanical power into electri Mechanical power Elgeecnterriactiitoyn Ha mPaiteezroielaelctric = (Made of PFAS) Electrica:signal @ 2) Inverse piezoelectric effect: Convert electrical voltage into power(Expansion and Contraction) Piezoelectric material (Made of PPAS) Sheet Electrical signal--Oscillation(S "t; Cr) 0 ---- ---- Electrical voltage, Electrical voltage iccaall vvoollttaaggee mmeecchhaannicicaall oouunndd)) 4. Sliding function 1) Lubrication improvement (Sliding part) Ben0 n ras) Lu(bGrriecasaentvith PFAS) F(luaocr 2) Seal improvement (Sliding part) Sliekaelipnagckpianrgt eotfcbearing (Made of PFAS) 3) Seal improvem: o | -- O-ring (e.g) Compressor Fprloupoerrotpioelsy,maerres,sowhmiecthimheasveuseexdceflolrenctonsteaailnienrgs. oioeppooolflyym PmAeerSr )ggeeaarr le of PFAS) eenntt ((FFiixxeedd ppaarrtt)) l((MMaaddee ooff PPFFAASS))