Document p2g0KMRRNy7avEMbrOejOJX7w

Wheel Stands . ' :C .< * Model 2810 AMMCO Wheel Stands gel you into profit able wheel alignment work with a minimum investment. Sturdy, easily handled alumi num castings support a vehicle 14" (356 mm) above ihe floor. Frame contact hoist or a high lift jack is used to lower vehicle on the Stands. Legs have leveling adjustments. Each Stand permanently identified ("Lett Front. Right Rear" etc.) lor fast set-up. Front siancfs rake optional Model 2460 Turntables and include removable Model 2878 Foot Rest Pialfomts. Set of 4: Ship. Wt. 183 lbs. (83 kg) For optional Model 2460 Turntables, see below. mmco Model 2460 Turntables 50 steel roller bearings in each Turntable give "full-floaling" movement to assure easy front wheel positioning for accurate caster, camber and steering axis inclina tion readings. Positive lock holds plate in straight-ahead position for accuratecentering of wheel as you drive on. Easily readdegree of turn scale has range ol 40" each side ol 0. Scale is adjustable so you can always have 0" at correct position for easy reading. Use them on any AMMCO Rack or Wheel Stands. Also lit many other Racks. Set ol 2: Ship. Wt. 92 lbs. (41.7 kg) 7.2461 K1amps Conven Model 2460 Turntables to ramp style lor use on the lloor. Quickly and easily -'*V attached. Set ol 4 Snip. Wt. 17 lbs. (7.7 kg) Model 2475 Ramp-Style Truck Turntables Top plate of heavy duty Truck Turntables rotates on 134 steel rollerbearings to hand le heavier weight ol truck wheels. Steel Ramps permit using them on the floor. Model 2475 Turntables have the same fea tures as Model 2460 units--scale range, O' adjustment, etc. Set of 2: Ship. Wt. 230 lbs. (104 kg) 11 NOVO120319