Document p22Y9jgwbQndo43wbrngnQbKk

\ Reduction Recommendations for this Soft Paste White Lead NEW WORK--Soft Wood FIRST COAT SECOND COAT THIRD COAT White Lead 100 Pounds 100 Pounds 100 Pounds Pure Raw Linseed Oil 4 Gallons* Gallons* 3 Gallons* Pure Turpentine 1)4 Gallons 1% Gallons Drier . I Pint 1 Pint 1 Pint Makes 9 Gallons 6 Gallons 6)4 Gallons If Boiled Linseed Oil is used omit Drier. REDUCING TABLE FOR 12^> 25 AND 50-POUND PACKAGES 50 pound Kegs--Divide the above quantities by 2 25 pound Kegs--Divide the above quantities by 4 12}4 pound Kegs--Divide the above quantities by 8 IMPORTANT REA Important Nota--Do not spoil the high qualit mixing with it cheap oil and cheap drier. USB T Add the oil a little fet a time and stir in each Resinous Wood--Reduce as directed above ex have larger percentage of Pure Turpentine. Previously Painted Surfaces--When in go directed above for second and third coats. Unpainted Old Weathered Lumber--Reduce first coat should have larger percentage of Pure R Since conditions and surfaces vary, no definite a Flat Finish--For flat finish on interior walls contents of 100 pound pail with two gallons of Fla Caution--Allow each coat to dry. In all paintin each coat to dry before applying another. Inside w twenty-four hours and outside work two or three .* *. to k so Ufol