Document oDOO4wR535zOV1JOKgXBJwaXX

C. HARRICADES 1. Needed for excavations, near roof edges, around overhead work and sim ilar areas. Hole covers or barricades must be placed at all floor openings. D. LADDERS 1. Straight- and extension ladders must be tied off. 2. Step ladders must be fully opened and set level. 3. Work facing the ladder with both feet on the rungs. 4. Stay off the top step of stepladders. K. SCAFFOLDS 1. Handrails and toeboards are required. 2. Lock all wheels before using. 3. Never move scaffolds with people on them. 4. Tie off, if over two lifts high. 5. Use ladders for access -- never climb bracing. F.'SIGNS 1. Use them when necessary and remove promptly when no longer required. 2.' Pay attention -- they mean what they say. 4 <: wki.mxi; m> hi ioi\<; 1. Remove comlnitil'lc materials (rom the immediate area.' , 2. Check equipment for safe working condi tion. 3.' Have flame permit before starting work. 4. Determine location of nearby tire extin guisher, or get one for the job. H. RIGGING 1.. Know proper use of chainfalls, come-alongB, chokers, shackles, and clamps. 2. Never raise a load over people. 3. Use tag lines: to control load. 4. Know capacities of rigging equipment and weights.of loads. I. FIRE PROTECTION 1. Smoke only in designated areas. . A 2. No "strike anywhere" ,'j matches allowed. * 3. Permits required for weld ing, burning, or other open flame. 4. Know the fire alarm signal and how to turn in an alarm. 5. Know where Are extinguishers are and how to use them. J. DANGER TAGS . Are . placed on switches and valves that must not be bperated. Have {minted on them; "HANDS OFF---DO NOT OPERATE" 5