Document oDGKmGRe9e6ddaj10yaraxpe7
Technical Department Bulletin
NUMBER : 27l\X DATE : MAY 2k, 1965 SUBJECT: PALGARD METAL PRIMER
FILE: P-R-19
GOODS: L7 (U.S. & CAN.)
Use
First coat on iron and steel surfaces under Palgard Epoxy Coating.
Color
Red, brown tone
Weight
15 lbs., 10 oz. (U.S. gallon) 18 lbs., 12 oz. (Can. gallon)
Consistency* Thin brushing
Application
Mix equal parts by volume of Palgard Metal Primer and Palgard Activator. Mix well and allow to stand one hour before use. Apply by brush. roller, or spray without further thinning. Mixed material not used within 12 hours will thicken and must be dis carded.
Clean brushes and equipment with P&L Lacquer Thinner immediately after use.
Drying*
Dust free 3 hours To recoat 16 hours
Gloss*
Fair to good
Leveling* Hiding*
Good Good
f
Elasticity* Good
Spreading
425 sq. ft. per Mixed U.S. gallon
Rate*
510 sq. ft. per Mixed Can. gallon
(for 2.0 mil
dry film
thickness)
^Designates characteristic after mixing with Palgard Activator.
Remarks
Palgard Metal Primer was adopted as a standard listed item at the Managers1 Meeting of March 2l|.-25 1965.
0007-PTL-000762
NUMBER: 27^1
Pratt & Lambert-Inc.
Technical Department Bulletin
-3
FILE: P-R-19
i
WALLBOARD - First Coat: Vapex Wall Primer. Second Coat: Palgard Epoxy Coating. For maximum protection, apply an additional coat of coating.
ALUMINUM, CONCRETE, MASONRY, WOOD, CERAMIC TILE, FIBER-GLASS, OR PLASTER - Two coats Palgard Epoxy Coating. For maximum protection, apply an additional coat of coating.
NOTE: ON AGGREGATE BLOCK, use Primafil as the;first coat, if maximum filling is desired.
OLD WORK - One or two coats Palgard Epoxy Coating. Note: Apply Palgard on a small area. If no bleeding or lifting occurs, com plete finishing of entire surface.
To reduce slipping hazard on FLOORS, use P&L Non-Slip Additive in final coat as follows: Add Activator to coating, let stand for one hour and thin each gallon of mixed enamel with one quart Duosol. To this mixture, stir in 12 oz. avdp. P&L Non-Slip Additive. Stir frequently during use. Apply by brush.
N. J. MILLER
0007-PTL-000764