Document npM0MrarN7kX3BXZ5BkQwvyjm

Engineering Material Specification . 8b-M8G138-A2 3.2.4 Wire ESE-M8G138-A1 ESE-M2A1D1-A ESE-M8G138-A2 SAE-30302 Except; Tensile strength, psi (MPa) Yield Strength, psi (MPa) Elongation. 10 in (254 mm), % min 115 000-160 000 (798 -1103) 85 000 - 120 000 (586 - 827) 10 105 000 -145 000 (724 -1000) 45 000 - 80 000 (310 - 552) 10 3.2.5 - Asbestos, min (ASTM D 1918) 99% 3.3 CONDITIONING Condition all specimens for 4 h at 23 ^ 2C and 50 + 2% R.H. atmosphere. 3.4 SUPPLIER'S RESPONSIBILITY Material supplied to this specification must be equivalent to that originally approved. Changes in formulation or processing shall not be made without prior approval as described in Supplier Procedure I-A. 4. APPROVAL OP SUPPLIERS Suppliers to this specification must be approved by the affected product engineering office. Procedure for gaining approval of a specific material to a new/existing ES-M specification is contained in Supplier Procedure I-A. Approved new suppliers will be added to the Engineering Materials Approved Source List. t>l$ fLAYoesroS MAuHArrAK) c *-"73- ILtS h) 3948-b *00l 1393 P#8 ot