Document nkYvyQ1Ze3wOk1dBEvQ4Qy4k8

IIN AOI EFFICACY OF FIFLOW AQI AS A RESCUE FOR POLLUTED SKIN FIFLOW AQI (Perfluorohexane (and) Perfluoroperhydrophenanthrene (and) Perfluoro Dimethylethylpentane) is a completely inert liquid, which has the capacity to clean the skin from gas pollutants. It functions as our blood, by partial air pressure, releasing Oxygen and capturing gaseous pollutants from the skin with a simple physical phenomena. It is the only gas capturing ingredient in cosmetic use, which brings back a healthy level of oxygen to skin cells. Fine particulate matter (PM2.5) is an air pollutant that is a concern for people's health when the levels are high. PM2.5 are tiny particles or droplets in the air and it is a well-used term in antipollution skin care. Ground-level ozone, sulfur dioxide, carbon dioxide, carbon monoxide and nitrogen dioxide are important contaminants too and are monitored to calculate air quality index (AQI). This study shows the efficacy of our FIFLOW AQI to capture gaseous pollutants. Tests used pH measurement TIC 09/16 theinnovationcompany.fr @theinnovationcompany.fr T HE INNOVATION COMPANY PARIS Made in France with fashion expertise and dedication. FIFLOW AQI PRODUCTS The table below introduces the studied product: Product Name Fiflow AQI Sample/Batch n L16H1801 INCI Name Perfluorohexane (and) Perfluoroperhydrophenanthrene (and) Perfluoro Dimethylethylpentane To have comparable assessment, all measurements have been performed on the following conditions: Date From 09/06/16 Products Studied Fiflow AQI Time of Measurement 10:00 - 12:00 am (before) Atmospheric Pressure 1019 hPa Outside Temperature Around 22C Weather Sunny day Outside Relative Humidity Around 57% Room Temperature of the evaluation room 21C Relative Humidity of the evaluation room 59% PH MEASUREMENT Assessment protocols A sample of Fiflow AQI is loaded with COz (pollutant) Oz content of Fiflow AQI loaded with COz is checked with an oxygen measurement FIFLOW AQI and Fiflow AQI loaded with COz are respec- tively added in neutral water (pH 7,00- approximately) with a 5o:5o ratio pH of each mixture of Fiflow AQI with water is measured. Results 0, content in Fiflow AQI loaded with COz: <2% We can conclude that FIFLOW AQI has been correctly loaded with COz to replace O f CONCLUSION The water used for this study had an initial pH of 7,11. After adding Fiflow loaded with CO, pH is 4,65. This phenomenon is due to the presence of CO2, which acidifies water. A molecule of CO2 reacts with a water molecule to form carbonic acid (CO2 + H2O --> HzCO3). This weak acid (pKai= 6,37) dissociates itself spontaneously to H+ (and HCO3-), which will cause a pH reduction. Moreover, no change was observed in terms of pH after adding normal FIFLOW AQI (7,11to 7,1o). This confirms that FIFLOW AQI captured the CO2, which decreases water pH. This is why FIFLOW AQI is a unique rescue for polluted skin. The table below summarizes the pH results: FIFLOW AQI loaded with COz reduces pH of water. Water Fiflow AQI + Water Fiflow AQI loaded with CO2 + (50:50) Water (50:50) pH 7,11 7,10 4,65 TIC 09/16 theinnovationcompany.fr theinnovationcompany.fr T H E INNOVATION COMPANY PARIS Made in France with fashion expertise and dedication.