Document nkR8dL8eNKyM45bbqZ5r123Dw

BACK TO MAIN Battelle Field Sampling Procedures Review Columbus Georgia City Survey regarding Empirical Human Exposure Assessment Multi-City Study To Susan Beach - Project Lead 3M, ET & SS PO Box 33331 Building 2-33-09 St. Paul, MN 55133-3331 65 1-778-7452 August 3,1999 Prepared by Jess Eldridge - Reviewer 3M, ET & SS PO Box 33331 Building 2-33-09 St. Paul, MN 55133-3331 651-778-5233 BACK TO MAIN Review Objective The objective of the on-site review was to observe the sampling and handling techniques used by Battelle during the Columbus, Georgia city survey for appropriateness and completeness within the context of the Multi-City Human Exposure Assessment Study (MCHEAS). City Survey Scope The sampling performed in Columbus, Georgia included the following sampling sources and types: 1) Urban Ambient Air - particulate phase - vapor phase 2) Drinking Water - surface water source (three distinct locations at least 500 feet apart) - sediment (coincident with surhce water locations above) - water treatment plant inlet - water treatment plant final outlet - tap water firm water distribution system (three distinct locations) - 3) Wastewater (POTW) - finaleffluent final sludge 4) -Sanitary Landfill Leachate 5 ) Quiet Water - surfacewater Review Criteria The criteria used to conduct the on-site review are based on the Quality Assurance Project Plan (QAPP) dated May 14, 1999 prepared by Battelle. Observations were made and questions were asked that directly addressed whether or not specific details documented in the QAPP were actually performed on site. Additionally, observations were made regarding the appropriateness of the sampling techniques followed in light of fluorochemical (FC) characteristics. Chronology The following is a list of sample locations, dates, times, and types. BACK TO MAIN Location I Date I Time I Oliver Lake I 7/27/99 I Chattahoochee River Oliver Lake Chattahoochee River Municipal Marina 7/27/99 7/27/99 Hieferhorn Creek 7/27/99 Pine Grove Landfill 7/27/99 POTW POTW Holiday Inn 7/27/99 7/27/99 7/27/99 11:15 1 1:20 11:35 12:lO 14:15 16:OO 16:lO 17:OO Source Drinkin-g Water Drinking Water Drinking Water Quiet Water Leachate Wastewater Wastewater Drinking Water Type I Surface Water Source Bay area near Roaring Branch River, Marina Sediment Tap Water - Public Lavatory Surface Water pond overflow to creek Leachate Flowing into sump Final Effluent Final Sludge Tap Water Room #204 Discussion Jess Eldridge (3M) and Susan Beach (3M) held several discussionsregarding the Columbus City Survey during the week of 7/19/99. Jess made plans to meet with the Battelle samplingteam in Columbus, Georgia to conduct the on-site review. The Battelle sampling team members were Kelly Irizany, Scott Macomber, and Chris Gagnm. Kelly was contacted to coordinatea meeting of the sampling team on Monday 7/26/99 in Columbus, Georgia at the Public Safety Center located at 5 10 1Om Street. Contact with Fire Chief Schmidt was planned to initiatethe sampling activities for the next two days. The following paragraphs address each event in chronological order. Each paragraph briefly describes what was done followed by reviewer comments. Underlined comments indicate areas of concern that warrant further discussion. Overall reviewer comments are listed at the end of the discussion. Photographs were taken throughout the city survey which were s c a ~ e adnd included in the photograph section. Day 1, Monday 7/26/99 Afier traveling to Columbus and meeting Chief Schmidt, the Ambient Urban Air Sampler was set up. The sampler was set up on the ground near a wash area behind Fire Station #1 located at 201 10* Street. See the scanned images of the sampling location in the photograph section. Initially there was trouble getting the unit to operate; improper power connection. No timer switch was shipped with the sampler therefore one had to be purchased. After a switch was purchased they went ahead with the set-up. According to the QAPP; the sampler was set up at 15:OO hours three hours (start time 16:20 hours), an initial totalizer reading was recorded, and the sampler was set to run 12hours. The coordinates of the sampler location were recorded based on a hand held Global Positioning System (GPS). Reviewer Comments: The initial troubles were resolved quickly and effectively, documentation was thorough, personnel wore disposable gloves while handling critical components of sampling train, and aluminum foil wrapping was in place on pre-cleaned parts. Method TO- 13"Determination of Benzopvrene and Other Polynuclear Aromatic ( P W in Ambient Air Using GCIHPLC" was cited in the QAPP as the method followed to perform the ambient air sampling. It may be more accurate to state that a modified method TO-13 was followed in that the compoundsof interest for this study are FC's and not PAH's. The analvtical portion of TO- 13 are detailed and the techniques used to analyze the particulate and PUF filters should be audited. An audit should also include a review of cleaning procedures used to prepare filters for use. TO-13 is part of the EPA Compendium of Methods for the Determination of Toxic Organic Compounds in Ambient Air. This version was published BACK TO MAIN in 1989. For future reference a new version. TO-13A was published in January 1997 and should be considered as a replacement for TO- 13. Several specific sampling set-up requirements were not followed (section I 1.3 in TO- 13). The sampler was not set-up at least 2 meters from any obstacle ( 1 1.3.2).The sampler was placed approximately one foot away from a wall which could cause a flow obstruction. The sampler was not equipped with an exhaust hose to prevent recycling of air into the sample head (1 I .3.2). A sinrtle point flow check was not performed as described in section 1 1.2.3of TO-13. Flow rates were varied from 55.50,40,30. and 20 inches of water using the voltage variator during set-up which is incorrect. It appeared that the five point flow variator adjustments were somehow thought to be the calibration procedure described in section 1 1.2 of TO- 13. A thorough review of TO- 13 and TO-13A are recommended prior to conducting any further ambient air testing relative to this study. Day 2, Tuesday 7/27/99 Event # I -Ambient UrbanAir Sampler: At approximately 08:OO hours the team arrived at Fire Station #1 to retrieve the particulate and PUF filters from the Ambient Urban AU Sampler. Upon arrival the sampler was still operating. The sampler should have stopped operatingat 04.:20hours. One of the "start" pins on the timer switch had inadvertentlybeen set to restart at around 08:OO hours. According to the QAPP; a final differential pressure and totalizer reading were recorded, the sampler was turned off, the particulate and PUF filters were retrieved, filter blanks and spikes were collected, the sampler filter holders were decontaminated with methanol, and wrapped in foil and packed. Reviewer Comments: The longer run time was minimal and the extra time is accounted for with the totalizer and factored into the results without bias. Field data documentation was thorough, personnel wore disposable gloves while handling critical components of sampling train, and the particulate and PUF filters were handled carefully and properly. The critical parts contactingthe filters were methanol rinsed and repacked. There is concern that not enough methanol was used to rinse such that liquid methanol dripped off the sampler parts thus rinsing away potential contaminants. The methanol was evaporating nearlv as fastas it was being applied. This would only re-distribute potential contaminants rather than rinse them away. There is a question as to why the air sampler was placed on the mound near the wall of the buildinn, Event # 2 - Tap WaterSample: A tap water sample was collectedat approximately 08:30 hours from the fire station kitchen sink after the air sampler activities were completed. According to the QAPP; replicate samples were collected in pre-cleaned one liter polyethylene bottles, labeled, and sampling information recorded on data sheets. Reviewer Comments: The collection of this sample was not witnessed. Field data documentation was thorough, and personnel wore disposablegloves while handling the samples. Event # 3 - Water Treatment Plant Outlet: A tap water sample was collected at 09:42hours fiom the final treated water. According to the QAPP; replicate samples of the final treated water were collected in precleaned one liter polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. There was a short piece of flexibletubing attached to the faucet where the samples were collected. Water runs continuallyinto the sink located in the test lab from several different treatment steps. There is concern about possible residual accumulation of FC's onto the surface of the flexible tubing. Some discussions regarding this concern are warranted. For future reference, it may be advisable to remove any such tubing before sampling. Event # I - Water TreatmentPlant Inlet: A water sample was collected at 10:16 hours from a slip stream off the pump house main that suppliesthe water treatment plant. According to the QAPP; replicate samples of the inlet water were collected in pre-cleaned one liter polyethylene bottles, labeled, and sampling BACK TO MAIN information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. The water source is Oliver Lake that has formed behind Oliver Dam located on the Chattahoochee River. Event # 5 and # 6 - Oliver Lake Surface Water: Surface water and sediment samples were collected at 10:30 and 10:35 hours respectively from a pooled area outside of the pump house. Samples were collected in an area between a floating bafflddock structure and shore. Sediment samples were collected near the water/shore boundary using a pre-cleaned stainless steel spoon. According to the QAPP; replicate samples of the surface water and sediment were collected in pre-cleaned polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. The water source is Oliver Lake that has formed behind Oliver Dam located on the Chattahoochee River. The surface water and sediment samples were collectedby wading into the shallows near shore. The mocess of wading stirred sediment fiom the bottom while water samples were being collected. The suggestion was made that Chris remain still and Kellv hand the bottles to him while he collected the water samples. This technique was used to collect the samples thereafter. Event # 7 and # 8 - Oliver Lake Surface Water: Surface water and sediment samples were collected at 11:05 and 11:10hours respectively from a bay area near Roaring Branch River south of the Municipal Marina. Sediment samples were collected near the water/shore boundary using a pre-cleaned stainless steel spoon. According to the QAPP; replicate samples of the surface water and sediment were collected in precleaned polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. The water source is from Oliver Lake that has formed behind Oliver Dam located on the Chattahoochee River. The surface water and sediment samples were collected by wading into the shallows near shore. The water samples were collectedwhile remaining still so as not to stir sediment from the bottom. Event # 9 and # 10 - Oliver Lake Surface Water: Surface water and sediment samples were collected at 11:15 and I 1:20 hours respectively from a bay area near Roaring Branch River north of the Municipal Marina. Sediment samples were collected near the water/shore boundary using a pre-cleaned stainless steel spoon. According to the QAPP; replicate samples of the surfacewater and sediment were collected in precleaned polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. The water source is Oliver Lake that has formed behind Oliver Dam located on the Chattahoochee River. The surface water and sediment samples were collected by wading into the shallows near shore. The water samples were collected while remaining still so as not to stir sediment from the bottom. Event # 11 - Tap WaterSample: A tap water sample was collected at 11:35 hours fiom the women's lavatory sink at the Municipal Marina near Roaring Branch River. According to the QAPP; replicate samples were collected in pre-cleaned one liter polyethylene bottles, labeled, and sampling information recorded on data sheets. BACK TO MAIN Reviewer Comments:The collection of this sample was not witnessed. Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. Event # 12 - Quiet WaterSample: A quiet water sample was collected at 12: IO hours from a pond located on private property to the east of Highway 2 19 near Hieferhorn Creek. Permission was given to sample from the pond. There was a weir structure to allow overflow directly into Hieferhorn Creek if water levels reached the weir elevation. There was a slight trickle of water overflowing the weir at the time of sampling. According to the QAPP; replicate samples were collected in pre-cleaned one liter polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinatesof the sampling location were recorded based on a hand held GPS. See the scanned image of the sampling location in the photograph section. Reviewer Comments: The surface water sample was collected by wading into the shallows near shore. The water sample was collected while remaining still so as not to stir sediment from the bottom. Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. Event # 23 -Leachate Sample: A leachate sample was collected 14:15 hours from the Pine Grove Landfill as water poured into the leachate collection sump. According to the QAPP; replicate samples were collected in pre-cleaned one liter polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Access to the sample was through a manhole opening into the collection sump. The pipe connection was about 8 feet below grade so samples needed to be collected remotely utilizing some apparatus. Access into the manhole was considered a confined space entry. Proper safety gear was not available for a confined space entry thus preventing entry. The sampling crew did not have any remote sampling apparatus so one was improvised. The sample bottles were taped to a jumper cable and lowered into position from ground level. A suggestionwas made to consider using a 6-8 foot telescopinghandle for sample collection in these types of situations. The handles are inexpensive and can be found in any home improvementhardwarestore. Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. Event # I4 -POTW Final Effluent Sample: A wastewater sample was collected at 16:OOhours from the final effluent. According to the QAPP; replicate samples were collected in pre-cleaned polyethylene bottles, labeled, and sampling information recorded on data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned images of the sampling location in the photograph section. Reviewer Comments: Access to the sample was through a trap door opening into the overflow structure. The pipe connection was about 10 feet below the trap doors so samples needed to be collected remotely utilizing some apparatus. Access into the structure was considered a confined space entry. Proper safety gear was not available for a confined space entry thus preventing entry. The POTW operatorshave a bucket and rope permanently set up to allow for sample collection. Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. D e r e is concern about possible residual accumulation of FC's onto the surface of the bucket. Some discussionsregarding this concern are warranted. For future reference it may be advisable for the s a m d i n ~crew to provide a remote sampling apparatus such as a telescoping handle. Event # 15 - POTW Final Sludge Sample: A sludge sample was collected by one of the POTW operators at 16:IO hours from the discharge line fiom the anaerobic digesters. According to the QAPP; replicate samples were collected in pre-cleaned polyethylene bottles, labeled, and sampling information recorded on the data sheets. The coordinates of the sampling location were recorded based on a hand held GPS. See the scanned image of the sampling location in the photograph section. BACK TO MAIN Reviewer Comments: The sludge sample was collected from the main discharge line by one of the operators and given directly to Chris. Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. Event # 16 - Tap WuferSample: A tap water sample was collected at approximately 17:OO hours 6om room # 204 at the Center City Holiday Inn. According to the QAPP; replicate samples were collected in pre-cleaned one liter polyethylene bottles, labeled, and sampling information recorded on data sheets. Reviewer Comments: The collection of this sample was not witnessed. Event # I7 - Field Spiking: A set of samples collected throughout the day were field spiked. Glass ampules containing the analytes of interest were emptied into the sample bottles. After an ampule was emptied, it was dropped into the sample bottle that was spiked. Reviewer Comments: The addition of the empty vial to the sample raises concern. This wocedure follows the OAPP but poses a potential contamination source. that being the outside surfices of the vial. The OAPP specifies the vial be methanol rinsed and wiped dry with a ChemWipe. What are the Drecautions that the external surfaces are keDt &om potential contamination? Field data documentation was thorough, and personnel wore disposable gloves while handling the samples. Overall CommenWQuestions For the most part the test crew followed the conditions stated in the QAPP for the water sampling. Documentation, labeling, and sampling handling were performed according to the QAPP. The survey was well coordinated before arrival in Columbus. The GPS was cross-checked for accuracy with a known survey marker. The lack of a remote sampling apparatus for the leachate sampling indicated a lack of forethought and experience. Has there been any testing to prove that ChemWipes are not a source of FC contamination? Have any vial blanks been tested to assure the external surfaces have been kept clean? A thorough review of TO-13 and TO-13A methods are recommended prior to performing any further ambient air testing. Urban Air Sampler Day 1, Set-Up BACK TO MAIN Water Treatment Plant Outlet Day 2 Event # 3 BACK TO MAIN Water Treatment Plant Day 2 Event # 3 BACK TO MAIN Water Treatment Plant Clarifier Day 2 Event # 3 BACK TO MAIN Water Treatment Plant Inlet Day 2 Event # 4 BACK TO MAIN Water Treatment Inlet Pump House Day 2 Event ## 4 BACK TO MAIN L I Drinking Water Seurce Day 2 Event # 5 and # 6 Oliver Lake,ChattahoocheeRiver BACK TO MAIN Drinking Water Source Day 2 Event # 7 and # 8 OliverLake,Chattahmhee River BACK TO MAIN Drinking Water Source Bay 2 Event # 9 and # 10 Oliver Lake, Chattahmhee River BACK TO MAIN Quiet Water Day 2 Event # 12 BACK TO MAIN Landfill Leachate Day 2 Event ## 13 BACK TO MAIN POTW Hnal Effluent Day 2 Event # 14 BACK TO MAIN POTW Final Effluent Day 2 Event # 14 BACK TO MAIN POTW Final Sludge Day 2 Event ## 15 BACK TO MAIN Field Spiking Day 2 Event # 17 BACK TO MAIN