Document nLwj75Vxrw8MOR5D1doKkG62

PLAINTIFF'S EXHIBIT J USG-I721 USE Wood Fiber Piaster Is excellent for patching hoi* and filling large cracks In old plaster surfaces. Do not use tor fine cracks. Spackling putty b recoup mended for fine cracks. .i MIXING Mix with water only in a clean container allow b soak a few minutes before mixing. APPLICATION CAUTION After application protect against drying out until the plaster has set hard, then allow to dry natural)* Mix no more than can be used In one half hour. Do not mix one batch with another. Do not use any mix that has begun to set. Since methods and conditions of application and use are beyond the control of the United States Gypsum Company, Its warranties of FITNESS ' end MERCHANTABILITY as well as any other warranties express or Implied, made in connec tion wtth the sale of this product SHALL NOT BE EFFECTIVE OR ACTIONABLE UNLESS the prod uct Is applied according to United States Gyp sum Company's directions or speclflcattone. Apply directly to gypsum lath, wood tath or metal lath. For patching, remove all broken or defective plaster and provide a firm base. Wet adjoining plaster and wood lath thoroughly, then fin in patch and trowel to a smooth surface. Plaster wfD not adhert to smooth, oily or dusty surfaces. On wood lath and metal lath It is recommended that a Vi" Click coat be troweled on cross raked, or broomed and allowed to set before filling In to level of old surface. WEIGHTS ' 9.91 LBS. NET l L-Vy10 LBS. GROSSO