Document mqKEEGdZwa9oMYGzxozyw3Gmb

Expansion Joints Flexonics Corporation EXPANSION JOINT DIVISION 1329 S. Third Ave. ' Maywood, Illinois Dxstbict Offices Atlanta Boston Cincinnati Cleveland Detroit Ft. Wobth Kansas Crrr Los Angeles Memphis Milwaukee New York Philadelphia San Francisco In Canada: Flexonics Corporation of Canada, Ltd., Brampton, Ontario FLEXON EXPANSION COMPENSATORS FOR STEAM AND HOT WATER HEATING SYSTEMS Model L for pressures to 40 psig The Flexon Model L Expansion Com pensator consists of a two ply phosphor bronze bellows with copper tube end connections enclosed in a floating pro tective shroud of brass. It is especially designed for control of expansion in finned type convectors, baseboard, radi ator or heating supply and return lines. Sizes from % in. through IK in. Suit able for temperatures from --60 F to 250 F and for pressures up to 40 psig. A single unit will handle motion up to K in. (K in. compression, K in. extension). Available with all commonly used fit tings. Model H for pressures to 150 psig The Flexon Model H Expansion Compensator is used primarily on vertical risers for high pressure steam and hot water lines. However it may also be used on horizontal runs. The Model H con sists of a corrosion resistant Flexon Bellows enclosed in an all-welded steel housing. The unit is provided with a positive anti-torque device to prevent possible bellows damage during installa tion. Sizes from K in. through 3 in. Suitable for temperatures from -- 60 F to 750 F. A single unit will handle motion up to 1% in. (IK 'n- compression, 34 in. exten sion). Mild steel male NPT pipe nipples on both ends are standard. Ground joint unions or weld ends are optional. Sizes and Dimensions Pipe Size (in.) K 1 m 2 Overall Length, Max. O.D., in. . in. Sweat Ends Female Thread ed Ends Sweat Ends Female Thread ed Ends 5K 6m)4 78HKe 9K IK IK 2K IK IK 2K 10K 3Me Sizes and Dimensions Pipe Size (in.) K 1 D4 IK 2 2K 3 O/A Length (in.) 9K 9K 13K 13K 12K 13Ke 14% Max. O.D. (in.) 2K 2K 3K m 4)4 5 5K Work ing Press (psi) 150 150 100 100 100 100 100 Unit Wt. (lb.) 2.6 2.8 7.7 8.0 10.3 13.7 17.4 FLEXON EXPANSION JOINTS FOR POWER AND PROCESS PIPING For medium and high pressure piping, Flexonics offers a complete line of corru gated expansion joints in free-flexing and controlled flexing types. Free-flexing units are available in standard sizes from 3 in. to 48 in. ID, for pressures to 30 psi, temperatures to 850 F. Designed for ex pansion travel up to 3% in. per unit. Controlled-flexing units are available in standard sizes from 3 in. to 48 in. ID, for pressures to 300 psi, temperatures to 850 F. Designed for expansion travel up to 7K in- per unit. Both free-flexing and controlled flexing types are available with flanged or welding ends. 324 Fittings and Flanges Pipe Welding Specialties The Babcock & Wilcox Co. lWH^>Tubular Products Division-Fittings Department '11^ 3839 West Burnham St. Milwaukee 46, Wisconsin SEAMLESS WELDING FITTINGS AND FORGED STEEL FLANGES DISTRICT OFFICES Beaver Falls, Pa........................... 712 Eleventh St. Boston 16, Mass...............................250 Boylston St. Chicago 3, III.................................105 S. LaSalle St. Cincinnati 6, Ohio.....................2330 Victory Pkwy. Cleveland 14, Ohio......................... 629 Euclid Ave. Detroit 26, Mich..............................615 Griswold St. Houbton 19, Texas............................. 2134 Welch St. Tulsa 3, Okla.................. Los Angeles 17, Cauf.............. 1111 WDshire Blvd. Milwaukee 15, Wis...........................2430 S. 28th St, New York 16, N. Y........ .............22 East 40th St. Philadelphia 2, Pa.............................Ill S. 15th St. St. Louis 8, Mo......................................3615 Olive St. San Francisco 3, Calif.....................785 Market St. Stracuse 2, N. Y............................. 205 Harrison St. ............. 427 S. Boston St. SO* Long Radius EUxw> B&W Welding Fittings are available in carbon, alloy and stainless steels in a wide range of sizes. Typical types and size ranges are listed below. For information on the complete line of B&W Seamless Welding Fittings and Flanges, write for B &W's Welding Fittings Catalog FB-76. 180 Long Radius Return Type of fitting Carbon and Alloy Steel Stainless Steel Standard W e ig h t Extra Strong Schedule 160 Double Extra Strong Schedule 5S L ig h t Weight Schedule 108 Standard W e ig h t Schedule 40S Extra Strong Schedule 80S Straight Tee Concentric Reducer Welding Neck Flange Slip-on Flange Blind Flange 45 Elbows--Long Radius 90 Elbows--Long Radius 90 Elbows--Reducing-- Long Radius 90 Elbows--Short Radius 180* Returns--Long Ra dius 180 Returns--Short Ra dius Tees--Straight Teee--Reducing Outlet Reducers--Concentric and Eccentric Caps Stub Ends--Lap Joint Laterals--Straight and Reducing Crosses--Straight and Reducing Swaged Nipples Bull Plugs Shaped Nipplee 90-45 Saddles--Sleeves >*-36 *4-36 >*-36 H-36 2x1 to 2x1 to 12x10 12x10 1-30 1>*-3C >*-30 >*-30 1-12 w- 1-12 *4-8 ---- 1-12 2-8 1-30 1>*--30 - - H-36 >*-36 >*-12 54-8 >*-30 >*-30 *4-12 *4-8 urn Hxh 51x54 lx*i to to to to 36x30 36x30 12x10 12x10 1-36 1-36 1-12 1-8 1-24 1-24 -- -- 1-24 1-24 -- >*-24 >*-24 - On ) .pplication On Application 2-12 2-12 1-30 - - - __ -- >*-12 H-12 H-12 H-12 _ _ _>*-12 >*-12 H-12 H-12 -- >*-12 H-12 H-12 H-12 -- - -- *4-12 H-12 H-12 H-12 *4-12 H-12 H-12 H-12 51x54 54x54 54x54 5a54 to to to 12x10 12x10 12x10 12x10 1-12 1-12 1-12 1-12 >*-12 H-12 H-12 H-12 On Application On Ap|ilication ___ ___ __ ---- ---- ------ Type of flange Welding Neck Slip-on Lap Joint Threaded Blind Socket Welding Reducing ... Slip-on and Threaded 1501b 3001b 4001b 6001b 9001b 15001b 25001b >*-24 H-24 H-24 H-24 H-24 H-24 H-12 >*-24 H-24 H-24 H-24 H-24 H-24 H-12 H-24 H-24 H-24 H-24 H-24 >*-24 H-12 >*-24 H-24 H-24 H-24 H-24 H-12 H-12 -- -- _H-24 H-24 H-24 H-24 >*-24 H-24 H-12 >4-24 H-4 H-3H 54x54- 5a>4- 51x54- 51x54- 51x54- 51x54- 51x54- 24x4 24x4 24x4 24x4 24x4 12x3H 12x3H FA-6910